MIPS: add support for Broadcom MIPS BCM6358 SoC family

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

arch/mips/dts/brcm,bcm6358.dtsi

@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "brcm,bcm6358";
+
+	cpus {
+		reg = <0xfffe0000 0x4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		u-boot,dm-pre-reloc;
+
+		cpu@0 {
+			compatible = "brcm,bcm6358-cpu", "mips,mips4Kc";
+			device_type = "cpu";
+			reg = <0>;
+			u-boot,dm-pre-reloc;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bcm6358-cpu", "mips,mips4Kc";
+			device_type = "cpu";
+			reg = <1>;
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		u-boot,dm-pre-reloc;
+
+		periph_osc: periph-osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	pflash: nor@1e000000 {
+		compatible = "cfi-flash";
+		reg = <0x1e000000 0x2000000>;
+		bank-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		status = "disabled";
+	};
+
+	ubus {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		u-boot,dm-pre-reloc;
+
+		pll_cntl: syscon@fffe0008 {
+			compatible = "syscon";
+			reg = <0xfffe0008 0x4>;
+		};
+
+		syscon-reboot {
+			compatible = "syscon-reboot";
+			regmap = <&pll_cntl>;
+			offset = <0x0>;
+			mask = <0x1>;
+		};
+
+		uart0: serial@fffe0100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfffe0100 0x18>;
+			clocks = <&periph_osc>;
+
+			status = "disabled";
+		};
+
+		uart1: serial@fffe0120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfffe0120 0x18>;
+			clocks = <&periph_osc>;
+
+			status = "disabled";
+		};
+
+		memory-controller@fffe1200 {
+			compatible = "brcm,bcm6358-mc";
+			reg = <0xfffe1200 0x1000>;
+			u-boot,dm-pre-reloc;
+		};
+	};
+};

arch/mips/mach-bmips/Kconfig

@@ -2,7 +2,23 @@ menu "Broadcom MIPS platforms"
 	depends on ARCH_BMIPS
 
 config SYS_SOC
-	default "none"
+	default "bcm6358" if SOC_BMIPS_BCM6358
+
+choice
+	prompt "Broadcom MIPS SoC select"
+
+config SOC_BMIPS_BCM6358
+	bool "BMIPS BCM6358 family"
+	select SUPPORTS_BIG_ENDIAN
+	select SUPPORTS_CPU_MIPS32_R1
+	select MIPS_TUNE_4KC
+	select MIPS_L1_CACHE_SHIFT_4
+	select SWAP_IO_SPACE
+	select SYSRESET_SYSCON
+	help
+	  This supports BMIPS BCM6358 family including BCM6358 and BCM6359.
+
+endchoice
 
 choice
 	prompt "Boot mode"

arch/mips/mach-bmips/include/ioremap.h

@@ -0,0 +1,45 @@
+/*
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+#ifndef __ASM_MACH_BMIPS_IOREMAP_H
+#define __ASM_MACH_BMIPS_IOREMAP_H
+
+#include <linux/types.h>
+
+/*
+ * Allow physical addresses to be fixed up to help peripherals located
+ * outside the low 32-bit range -- generic pass-through version.
+ */
+static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr,
+						phys_addr_t size)
+{
+	return phys_addr;
+}
+
+static inline int is_bmips_internal_registers(phys_addr_t offset)
+{
+#if defined(CONFIG_SOC_BMIPS_BCM6358)
+	if (offset >= 0xfffe0000)
+		return 1;
+#endif
+
+	return 0;
+}
+
+static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size,
+						unsigned long flags)
+{
+	if (is_bmips_internal_registers(offset))
+		return (void __iomem *)offset;
+
+	return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+	return is_bmips_internal_registers((unsigned long)addr);
+}
+
+#define _page_cachable_default	_CACHE_CACHABLE_NONCOHERENT
+
+#endif /* __ASM_MACH_BMIPS_IOREMAP_H */

include/configs/bmips_bcm6358.h

@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_BMIPS_BCM6358_H
+#define __CONFIG_BMIPS_BCM6358_H
+
+/* CPU */
+#define CONFIG_SYS_MIPS_TIMER_FREQ	150000000
+
+/* RAM */
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_SYS_SDRAM_BASE		0x80000000
+
+/* U-Boot */
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE + 0x100000
+
+#if defined(CONFIG_BMIPS_BOOT_RAM)
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_INIT_SP_OFFSET	0x2000
+#endif
+
+#define CONFIG_SYS_FLASH_BASE			0xbe000000
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT	1
+
+#endif /* __CONFIG_BMIPS_BCM6358_H */