leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Convert CONFIG_SYS_I2C_SOFT et al to Kconfig

Browse Source 
This converts the following to Kconfig:
   CONFIG_SYS_I2C_SOFT
   CONFIG_SYS_I2C_SOFT_SPEED
   CONFIG_SYS_I2C_SOFT_SLAVE

Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini 2021-08-17 17:59:46 -04:00
parent 88cd7d0ea9
commit de69572569
17 changed files with 45 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
board/sunxi/board.c
View File

@ -47,7 +47,7 @@
#include <sy8106a.h>
#include <asm/setup.h>
#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
#if defined(CONFIG_VIDEO_LCD_PANEL_I2C)
/* So that we can use pin names in Kconfig and sunxi_name_to_gpio() */
int soft_i2c_gpio_sda;
int soft_i2c_gpio_scl;

3
configs/Colombus_defconfig
View File

@ -17,6 +17,9 @@ CONFIG_VIDEO_LCD_PANEL_I2C_SDA="PA23"
CONFIG_VIDEO_LCD_PANEL_I2C_SCL="PA24"
CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SYS_I2C_SOFT=y
CONFIG_SYS_I2C_SOFT_SPEED=50000
CONFIG_SYS_I2C_SOFT_SLAVE=0x00
CONFIG_PHY_REALTEK=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y

3
configs/UTOO_P66_defconfig
View File

@ -21,6 +21,9 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_TL059WV5C0=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C=y
CONFIG_SYS_I2C_SOFT=y
CONFIG_SYS_I2C_SOFT_SPEED=50000
CONFIG_SYS_I2C_SOFT_SLAVE=0x00
# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
CONFIG_CONS_INDEX=2
CONFIG_USB_MUSB_HOST=y

2
configs/ethernut5_defconfig
View File

@ -55,6 +55,8 @@ CONFIG_DM=y
CONFIG_CLK=y
CONFIG_CLK_AT91=y
CONFIG_AT91_GPIO=y
CONFIG_SYS_I2C_SOFT=y
CONFIG_SYS_I2C_SOFT_SLAVE=0
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_MTD_RAW_NAND=y

2
configs/km_kirkwood_128m16_defconfig
View File

@ -46,6 +46,8 @@ CONFIG_VERSION_VARIABLE=y
CONFIG_NETCONSOLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
CONFIG_SYS_I2C_SOFT=y
CONFIG_SYS_I2C_SOFT_SLAVE=0x0
CONFIG_SYS_I2C_EEPROM_ADDR=0x50
# CONFIG_MMC is not set
CONFIG_MTD=y

2
configs/km_kirkwood_defconfig
View File

@ -46,6 +46,8 @@ CONFIG_VERSION_VARIABLE=y
CONFIG_NETCONSOLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
CONFIG_SYS_I2C_SOFT=y
CONFIG_SYS_I2C_SOFT_SLAVE=0x0
CONFIG_SYS_I2C_EEPROM_ADDR=0x50
# CONFIG_MMC is not set
CONFIG_MTD=y

2
configs/km_kirkwood_pci_defconfig
View File

@ -47,6 +47,8 @@ CONFIG_VERSION_VARIABLE=y
CONFIG_NETCONSOLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
CONFIG_SYS_I2C_SOFT=y
CONFIG_SYS_I2C_SOFT_SLAVE=0x0
CONFIG_SYS_I2C_EEPROM_ADDR=0x50
# CONFIG_MMC is not set
CONFIG_MTD=y

2
configs/kmcoge5un_defconfig
View File

@ -50,6 +50,8 @@ CONFIG_VERSION_VARIABLE=y
CONFIG_NETCONSOLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
CONFIG_SYS_I2C_SOFT=y
CONFIG_SYS_I2C_SOFT_SLAVE=0x0
CONFIG_SYS_I2C_EEPROM_ADDR=0x50
# CONFIG_MMC is not set
CONFIG_MTD=y

2
configs/kmnusa_defconfig
View File

@ -50,6 +50,8 @@ CONFIG_VERSION_VARIABLE=y
CONFIG_NETCONSOLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
CONFIG_SYS_I2C_SOFT=y
CONFIG_SYS_I2C_SOFT_SLAVE=0x0
CONFIG_SYS_I2C_EEPROM_ADDR=0x50
# CONFIG_MMC is not set
CONFIG_MTD=y

2
configs/kmsuse2_defconfig
View File

@ -51,6 +51,8 @@ CONFIG_VERSION_VARIABLE=y
CONFIG_NETCONSOLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
CONFIG_SYS_I2C_SOFT=y
CONFIG_SYS_I2C_SOFT_SLAVE=0x0
CONFIG_SYS_I2C_EEPROM_ADDR=0x50
# CONFIG_MMC is not set
CONFIG_MTD=y

2
configs/snapper9260_defconfig
View File

@ -33,6 +33,8 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_TFTP_TSIZE=y
CONFIG_AT91_GPIO=y
CONFIG_CMD_PCA953X=y
CONFIG_SYS_I2C_SOFT=y
CONFIG_SYS_I2C_SOFT_SLAVE=0x7F
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y

2
configs/snapper9g20_defconfig
View File

@ -32,6 +32,8 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_TFTP_TSIZE=y
CONFIG_AT91_GPIO=y
CONFIG_CMD_PCA953X=y
CONFIG_SYS_I2C_SOFT=y
CONFIG_SYS_I2C_SOFT_SLAVE=0x7F
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y

19
drivers/i2c/Kconfig
View File

@ -437,6 +437,25 @@ config SYS_I2C_SANDBOX
bus. Devices can be attached to the bus using the device tree
which specifies the driver to use. See sandbox.dts as an example.
config SYS_I2C_SOFT
bool "Legacy software I2C interface"
help
Enable the legacy software defined I2C interface
config SYS_I2C_SOFT_SPEED
int "Software I2C bus speed"
depends on SYS_I2C_SOFT
default 100000
help
Speed of the software I2C bus
config SYS_I2C_SOFT_SLAVE
hex "Software I2C slave address"
depends on SYS_I2C_SOFT
default 0xfe
help
Slave address of the software I2C bus
config SYS_I2C_OCTEON
bool "Octeon II/III/TX/TX2 I2C driver"
depends on (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2) && DM_I2C

3
include/configs/ethernut5.h
View File

@ -98,9 +98,6 @@
#define CONFIG_SYS_MAX_I2C_BUS 1
#define CONFIG_SYS_I2C_LEGACY
#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
#define CONFIG_SYS_I2C_SOFT_SPEED 100000
#define CONFIG_SYS_I2C_SOFT_SLAVE 0
#define I2C_SOFT_DECLARATIONS

4
include/configs/km/km_arm.h
View File

@ -91,7 +91,6 @@
*/
#undef CONFIG_I2C_MVTWSI
#define CONFIG_SYS_I2C_LEGACY
#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
#define CONFIG_SYS_I2C_INIT_BOARD
#define CONFIG_KIRKWOOD_GPIO /* Enable GPIO Support */
@ -125,9 +124,6 @@ extern void __set_direction(unsigned pin, int high);
#define I2C_DELAY udelay(1)
#define I2C_SOFT_DECLARATIONS
#define CONFIG_SYS_I2C_SOFT_SLAVE 0x0
#define CONFIG_SYS_I2C_SOFT_SPEED 100000
/* EEprom support 24C128, 24C256 valid for environment eeprom */
#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE

3
include/configs/snapper9260.h
View File

@ -74,9 +74,6 @@
/* I2C - Bit-bashed */
#define CONFIG_SYS_I2C_LEGACY
#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
#define CONFIG_SYS_I2C_SOFT_SPEED 100000
#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
#define CONFIG_SOFT_I2C_READ_REPEATED_START
#define I2C_INIT do { \
at91_set_gpio_output(AT91_PIN_PA23, 1); \

5
include/configs/sunxi-common.h
View File

@ -205,10 +205,7 @@
#endif
#endif
#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
#define CONFIG_SYS_I2C_SOFT
#define CONFIG_SYS_I2C_SOFT_SPEED 50000
#define CONFIG_SYS_I2C_SOFT_SLAVE 0x00
#if defined(CONFIG_VIDEO_LCD_PANEL_I2C)
/* We use pin names in Kconfig and sunxi_name_to_gpio() */
#define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda
#define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl