ARM: amlogic: add JetHub D1/H1 device support
Add support for new home automation devices. JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation controller with the following features: - DIN Rail Mounting case - Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz - no video out - 512Mb/1GB DDR3 - 8/16GB eMMC flash - 1 x USB 2.0 - 1 x 10/100Mbps ethernet - WiFi / Bluetooth AMPAK AP6255 (Broadcom BCM43455) IEEE 802.11a/b/g/n/ac, Bluetooth 4.2. - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support. - 2 x gpio LEDS - GPIO user Button - 1 x 1-Wire - 2 x RS-485 - 4 x dry contact digital GPIO inputs - 3 x relay GPIO outputs - DC source with a voltage of 9 to 56 V / Passive POE JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation controller with the following features: - Square plastic case - Amlogic S905W (ARM Cortex-A53) quad-core up to 1.5GHz - no video out - 1GB DDR3 - 8/16GB eMMC flash - 2 x USB 2.0 - 1 x 10/100Mbps ethernet - WiFi / Bluetooth RTL8822CS IEEE 802.11a/b/g/n/ac, Bluetooth 5.0. - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support. - MicroSD 2.x/3.x/4.x DS/HS cards. - 1 x gpio LED - ADC user Button - DC source 5V microUSB with serial console Patches from: - JetHub H1 https://lore.kernel.org/r/20210915085715.1134940-4-adeep@lexina.in https://git.kernel.org/amlogic/c/abfaae24ecf3e7f00508b60fa05e2b6789b8f607 - JetHub D1 https://lore.kernel.org/r/20210915085715.1134940-5-adeep@lexina.in https://git.kernel.org/amlogic/c/8e279fb2903990cc6296ec56b3b80b2f854b6c79 Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: removed unused variable value] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
This commit is contained in:
Vyacheslav Bocharov
Neil Armstrong
parent
15eda54676
commit
de19baef68
@ -169,10 +169,12 @@ dtb-$(CONFIG_ARCH_MESON) += \
|
||||
meson-gxl-s905x-libretech-cc-v2.dtb \
|
||||
meson-gxl-s905x-khadas-vim.dtb \
|
||||
meson-gxl-s905d-libretech-pc.dtb \
|
||||
meson-gxl-s905w-jethome-jethub-j80.dtb \
|
||||
meson-gxm-khadas-vim2.dtb \
|
||||
meson-gxm-s912-libretech-pc.dtb \
|
||||
meson-gxm-wetek-core2.dtb \
|
||||
meson-axg-s400.dtb \
|
||||
meson-axg-jethome-jethub-j100.dtb \
|
||||
meson-g12a-u200.dtb \
|
||||
meson-g12a-sei510.dtb \
|
||||
meson-g12b-gtking.dtb \
|
||||
|
||||
361
arch/arm/dts/meson-axg-jethome-jethub-j100.dts
Normal file
361
arch/arm/dts/meson-axg-jethome-jethub-j100.dts
Normal file
@ -0,0 +1,361 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2021 Vyacheslav Bocharov <adeep@lexina.in>
|
||||
* Copyright (c) 2020 JetHome
|
||||
* Author: Aleksandr Kazantsev <ak@tvip.ru>
|
||||
* Author: Alexey Shevelkin <ash@tvip.ru>
|
||||
* Author: Vyacheslav Bocharov <adeep@lexina.in>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "meson-axg.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/thermal/thermal.h>
|
||||
|
||||
/ {
|
||||
compatible = "jethome,jethub-j100", "amlogic,a113d", "amlogic,meson-axg";
|
||||
model = "JetHome JetHub J100";
|
||||
aliases {
|
||||
serial0 = &uart_AO; /* Console */
|
||||
serial1 = &uart_AO_B; /* External UART (Wireless Module) */
|
||||
ethernet0 = ðmac;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
/* 1024MB RAM */
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
linux,cma {
|
||||
size = <0x0 0x400000>;
|
||||
};
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vcc_3v3: regulator-vcc_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vddao_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_5v: regulator-vcc_5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC5V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddao_3v3: regulator-vddao_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc_5v>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddio_ao18: regulator-vddio_ao18 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDIO_AO18";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vddao_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddio_boot: regulator-vddio_boot {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDIO_BOOT";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vddao_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
usb_pwr: regulator-usb_pwr {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "USB_PWR";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc_5v>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
|
||||
clocks = <&wifi32k>;
|
||||
clock-names = "ext_clock";
|
||||
};
|
||||
|
||||
wifi32k: wifi32k {
|
||||
compatible = "pwm-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
|
||||
};
|
||||
|
||||
thermal-zones {
|
||||
cpu_thermal: cpu-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
thermal-sensors = <&scpi_sensors 0>;
|
||||
trips {
|
||||
cpu_passive: cpu-passive {
|
||||
temperature = <70000>; /* millicelsius */
|
||||
hysteresis = <2000>; /* millicelsius */
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
cpu_hot: cpu-hot {
|
||||
temperature = <80000>; /* millicelsius */
|
||||
hysteresis = <2000>; /* millicelsius */
|
||||
type = "hot";
|
||||
};
|
||||
|
||||
cpu_critical: cpu-critical {
|
||||
temperature = <100000>; /* millicelsius */
|
||||
hysteresis = <2000>; /* millicelsius */
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
cpu_cooling_maps: cooling-maps {
|
||||
map0 {
|
||||
trip = <&cpu_passive>;
|
||||
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
};
|
||||
|
||||
map1 {
|
||||
trip = <&cpu_hot>;
|
||||
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
};
|
||||
};
|
||||
};
|
||||
onewire {
|
||||
compatible = "w1-gpio";
|
||||
gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>;
|
||||
#gpio-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&efuse {
|
||||
sn: sn@32 {
|
||||
reg = <0x32 0x20>;
|
||||
};
|
||||
|
||||
eth_mac: eth_mac@0 {
|
||||
reg = <0x0 0x6>;
|
||||
};
|
||||
|
||||
bt_mac: bt_mac@6 {
|
||||
reg = <0x6 0x6>;
|
||||
};
|
||||
|
||||
wifi_mac: wifi_mac@c {
|
||||
reg = <0xc 0x6>;
|
||||
};
|
||||
|
||||
bid: bid@12 {
|
||||
reg = <0x12 0x20>;
|
||||
};
|
||||
};
|
||||
|
||||
ðmac {
|
||||
status = "okay";
|
||||
pinctrl-0 = <ð_rmii_x_pins>;
|
||||
pinctrl-names = "default";
|
||||
phy-handle = <ð_phy0>;
|
||||
phy-mode = "rmii";
|
||||
|
||||
mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
/* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */
|
||||
eth_phy0: ethernet-phy@0 {
|
||||
/* compatible = "ethernet-phy-id0243.0c54";*/
|
||||
max-speed = <100>;
|
||||
reg = <0>;
|
||||
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <10000>;
|
||||
reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* Internal I2C bus (on CPU module) */
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c1_z_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
/* RTC */
|
||||
pcf8563: pcf8563@51 {
|
||||
compatible = "nxp,pcf8563";
|
||||
reg = <0x51>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
/* Peripheral I2C bus (on motherboard) */
|
||||
&i2c_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pwm_ab {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pwm_a_x20_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
/* wifi module */
|
||||
&sd_emmc_b {
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pinctrl-0 = <&sdio_pins>;
|
||||
pinctrl-1 = <&sdio_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
sd-uhs-sdr104;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vddio_boot>;
|
||||
|
||||
brcmf: wifi@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
};
|
||||
};
|
||||
|
||||
/* emmc storage */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
disable-wp;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vddio_boot>;
|
||||
};
|
||||
|
||||
/* UART Bluetooth */
|
||||
&uart_B {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>;
|
||||
pinctrl-names = "default";
|
||||
uart-has-rtscts;
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
shutdown-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
/* UART Console */
|
||||
&uart_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
/* UART Wireless module */
|
||||
&uart_AO_B {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_b_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
phy-supply = <&usb_pwr>;
|
||||
};
|
||||
|
||||
&spicc1 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&gpio {
|
||||
gpio-line-names =
|
||||
"", "", "", "", "", // 0 - 4
|
||||
"", "", "", "", "", // 5 - 9
|
||||
"UserButton", "", "", "", "", // 10 - 14
|
||||
"", "", "", "", "", // 15 - 19
|
||||
"", "", "", "", "", // 20 - 24
|
||||
"", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29
|
||||
"Output1", "", "", "", "", // 30 - 34
|
||||
"", "ZigBeeBOOT", "", "", "", // 35 - 39
|
||||
"", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44
|
||||
"Input2", "Input1", "", "", "", // 45 - 49
|
||||
"", "", "", "", "", // 50 - 54
|
||||
"", "", "", "", "", // 55 - 59
|
||||
"", "", "", "", "", // 60 - 64
|
||||
"", "", "", "", "", // 65 - 69
|
||||
"", "", "", "", "", // 70 - 74
|
||||
"", "", "", "", "", // 75 - 79
|
||||
"", "", "", "", "", // 80 - 84
|
||||
"", ""; // 85-86
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
241
arch/arm/dts/meson-gxl-s905w-jethome-jethub-j80.dts
Normal file
241
arch/arm/dts/meson-gxl-s905w-jethome-jethub-j80.dts
Normal file
@ -0,0 +1,241 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2021 Vyacheslav Bocharov <adeep@lexina.in>
|
||||
* Copyright (c) 2020 JetHome
|
||||
* Author: Aleksandr Kazantsev <ak@tvip.ru>
|
||||
* Author: Alexey Shevelkin <ash@tvip.ru>
|
||||
* Author: Vyacheslav Bocharov <adeep@lexina.in>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "meson-gxl.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "jethome,jethub-j80", "amlogic,s905w", "amlogic,meson-gxl";
|
||||
model = "JetHome JetHub J80";
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
linux,cma {
|
||||
size = <0x0 0x1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
serial0 = &uart_AO; /* Console */
|
||||
serial1 = &uart_A; /* Bluetooth */
|
||||
serial2 = &uart_AO_B; /* Wireless module 1 */
|
||||
serial3 = &uart_C; /* Wireless module 2 */
|
||||
ethernet0 = ðmac;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
vddio_ao18: regulator-vddio_ao18 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDIO_AO18";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vddio_boot: regulator-vddio_boot {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDIO_BOOT";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vddao_3v3: regulator-vddao_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vcc_3v3: regulator-vcc_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wifi32k: wifi32k {
|
||||
compatible = "pwm-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
|
||||
clocks = <&wifi32k>;
|
||||
clock-names = "ext_clock";
|
||||
};
|
||||
};
|
||||
|
||||
&efuse {
|
||||
bt_mac: bt_mac@6 {
|
||||
reg = <0x6 0x6>;
|
||||
};
|
||||
|
||||
wifi_mac: wifi_mac@C {
|
||||
reg = <0xc 0x6>;
|
||||
};
|
||||
};
|
||||
|
||||
&sn {
|
||||
reg = <0x32 0x20>;
|
||||
};
|
||||
|
||||
ð_mac {
|
||||
reg = <0x0 0x6>;
|
||||
};
|
||||
|
||||
&bid {
|
||||
reg = <0x12 0x20>;
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&pwm_ef {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pwm_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&clkc CLKID_FCLK_DIV4>;
|
||||
clock-names = "clkin0";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vddio_ao18>;
|
||||
};
|
||||
|
||||
/* Wireless SDIO Module */
|
||||
&sd_emmc_a {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdio_pins>;
|
||||
pinctrl-1 = <&sdio_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <50000000>;
|
||||
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
||||
/* WiFi firmware requires power to be kept while in suspend */
|
||||
keep-power-in-suspend;
|
||||
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vddio_boot>;
|
||||
};
|
||||
|
||||
/* SD card */
|
||||
&sd_emmc_b {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdcard_pins>;
|
||||
pinctrl-1 = <&sdcard_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <50000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vddio_boot>;
|
||||
};
|
||||
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
disable-wp;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vddio_boot>;
|
||||
};
|
||||
|
||||
/* Console UART */
|
||||
&uart_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
/* S905W only has access to its internal PHY */
|
||||
ðmac {
|
||||
status = "okay";
|
||||
phy-mode = "rmii";
|
||||
phy-handle = <&internal_phy>;
|
||||
};
|
||||
|
||||
&internal_phy {
|
||||
status = "okay";
|
||||
pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&uart_A {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
|
||||
pinctrl-names = "default";
|
||||
uart-has-rtscts;
|
||||
};
|
||||
|
||||
&uart_C {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_c_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&uart_AO_B {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_b_pins>, <&uart_ao_b_cts_rts_pins>;
|
||||
pinctrl-names = "default";
|
||||
uart-has-rtscts;
|
||||
};
|
||||
|
||||
&i2c_B {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c_b_pins>;
|
||||
|
||||
pcf8563: pcf8563@51 {
|
||||
compatible = "nxp,pcf8563";
|
||||
reg = <0x51>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
9
board/amlogic/jethub-j80/MAINTAINERS
Normal file
9
board/amlogic/jethub-j80/MAINTAINERS
Normal file
@ -0,0 +1,9 @@
|
||||
JetHome JetHub
|
||||
M: Vyacheslav Bocharov <adeep@lexina.in>
|
||||
S: Maintained
|
||||
L: u-boot-amlogic@groups.io
|
||||
F: board/amlogic/jethub-j80/
|
||||
F: configs/jethub_j80_defconfig
|
||||
F: configs/jethub_j100_defconfig
|
||||
F: doc/board/amlogic/jethub-j80.rst
|
||||
F: doc/board/amlogic/jethub-j100.rst
|
||||
6
board/amlogic/jethub-j80/Makefile
Normal file
6
board/amlogic/jethub-j80/Makefile
Normal file
@ -0,0 +1,6 @@
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
# (C) Copyright 2021 Vyacheslav Bocharov
|
||||
# Author: Vyacheslav Bocharov <adeep@lexina.in>
|
||||
|
||||
obj-y := jethub-j80.o
|
||||
67
board/amlogic/jethub-j80/jethub-j80.c
Normal file
67
board/amlogic/jethub-j80/jethub-j80.c
Normal file
@ -0,0 +1,67 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright (C) 2021 Vyacheslav Bocharov
|
||||
* Author: Vyacheslav Bocharov <adeep@lexina.in>
|
||||
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
*
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <dm.h>
|
||||
#include <adc.h>
|
||||
#include <env.h>
|
||||
#include <init.h>
|
||||
#include <net.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/gx.h>
|
||||
#include <asm/arch/sm.h>
|
||||
#include <asm/arch/eth.h>
|
||||
#include <asm/arch/mem.h>
|
||||
|
||||
#define EFUSE_SN_OFFSET 50
|
||||
#define EFUSE_SN_SIZE 32
|
||||
#define EFUSE_MAC_OFFSET 0
|
||||
#define EFUSE_MAC_SIZE 6
|
||||
#define EFUSE_USID_OFFSET 18
|
||||
#define EFUSE_USID_SIZE 32
|
||||
|
||||
int misc_init_r(void)
|
||||
{
|
||||
u8 mac_addr[EFUSE_MAC_SIZE];
|
||||
char serial[EFUSE_SN_SIZE];
|
||||
char usid[EFUSE_USID_SIZE];
|
||||
ssize_t len;
|
||||
unsigned int adcval;
|
||||
int ret;
|
||||
|
||||
if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
|
||||
len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
|
||||
mac_addr, EFUSE_MAC_SIZE);
|
||||
if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr))
|
||||
eth_env_set_enetaddr("ethaddr", mac_addr);
|
||||
else
|
||||
meson_generate_serial_ethaddr();
|
||||
}
|
||||
|
||||
if (!env_get("serial")) {
|
||||
len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial,
|
||||
EFUSE_SN_SIZE);
|
||||
if (len == EFUSE_SN_SIZE)
|
||||
env_set("serial", serial);
|
||||
}
|
||||
|
||||
if (!env_get("usid")) {
|
||||
len = meson_sm_read_efuse(EFUSE_USID_OFFSET, usid,
|
||||
EFUSE_USID_SIZE);
|
||||
if (len == EFUSE_USID_SIZE)
|
||||
env_set("usid", usid);
|
||||
}
|
||||
|
||||
ret = adc_channel_single_shot("adc@8680", 0, &adcval);
|
||||
if (adcval < 3000)
|
||||
env_set("userbutton", "true");
|
||||
else
|
||||
env_set("userbutton", "false");
|
||||
|
||||
return 0;
|
||||
}
|
||||
63
configs/jethub_j100_defconfig
Normal file
63
configs/jethub_j100_defconfig
Normal file
@ -0,0 +1,63 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_SYS_CONFIG_NAME="jethub"
|
||||
CONFIG_ARCH_MESON=y
|
||||
CONFIG_SYS_TEXT_BASE=0x01000000
|
||||
CONFIG_NR_DRAM_BANKS=1
|
||||
CONFIG_ENV_SIZE=0x2000
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="meson-axg-jethome-jethub-j100"
|
||||
CONFIG_MESON_AXG=y
|
||||
CONFIG_DEBUG_UART_BASE=0xff803000
|
||||
CONFIG_DEBUG_UART_CLOCK=24000000
|
||||
CONFIG_IDENT_STRING=" jethubj100"
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_SYS_LOAD_ADDR=0x01000000
|
||||
CONFIG_OF_BOARD_SETUP=y
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
CONFIG_MISC_INIT_R=y
|
||||
# CONFIG_CMD_BDI is not set
|
||||
# CONFIG_CMD_IMI is not set
|
||||
CONFIG_CMD_EEPROM=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_RANDOM_UUID=y
|
||||
CONFIG_CMD_I2C=y
|
||||
# CONFIG_CMD_LOADS is not set
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_USB=y
|
||||
CONFIG_CMD_USB_MASS_STORAGE=y
|
||||
CONFIG_CMD_RTC=y
|
||||
CONFIG_CMD_REGULATOR=y
|
||||
CONFIG_PARTITION_TYPE_GUID=y
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_SYS_I2C_MESON=y
|
||||
CONFIG_MMC_MESON_GX=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_PHY_REALTEK=y
|
||||
CONFIG_DM_ETH=y
|
||||
CONFIG_ETH_DESIGNWARE_MESON8B=y
|
||||
CONFIG_MESON_GXL_USB_PHY=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCTRL_MESON_AXG=y
|
||||
CONFIG_DM_REGULATOR=y
|
||||
CONFIG_DM_REGULATOR_FIXED=y
|
||||
CONFIG_DM_RESET=y
|
||||
CONFIG_DM_RTC=y
|
||||
CONFIG_RTC_PCF8563=y
|
||||
CONFIG_DEBUG_UART_ANNOUNCE=y
|
||||
CONFIG_DEBUG_UART_SKIP_INIT=y
|
||||
CONFIG_MESON_SERIAL=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_XHCI_DWC3=y
|
||||
CONFIG_USB_DWC2=y
|
||||
CONFIG_USB_DWC3=y
|
||||
# CONFIG_USB_DWC3_GADGET is not set
|
||||
CONFIG_USB_DWC3_MESON_GXL=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
|
||||
CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
|
||||
CONFIG_USB_GADGET_DWC2_OTG=y
|
||||
CONFIG_USB_GADGET_DOWNLOAD=y
|
||||
CONFIG_OF_LIBFDT_OVERLAY=y
|
||||
71
configs/jethub_j80_defconfig
Normal file
71
configs/jethub_j80_defconfig
Normal file
@ -0,0 +1,71 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_SYS_BOARD="jethub-j80"
|
||||
CONFIG_SYS_CONFIG_NAME="jethub"
|
||||
CONFIG_ARCH_MESON=y
|
||||
CONFIG_SYS_TEXT_BASE=0x01000000
|
||||
CONFIG_NR_DRAM_BANKS=1
|
||||
CONFIG_ENV_SIZE=0x2000
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="meson-gxl-s905w-jethome-jethub-j80"
|
||||
CONFIG_MESON_GXL=y
|
||||
CONFIG_DEBUG_UART_BASE=0xc81004c0
|
||||
CONFIG_DEBUG_UART_CLOCK=24000000
|
||||
CONFIG_IDENT_STRING=" jethubj80"
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_SYS_LOAD_ADDR=0x01000000
|
||||
CONFIG_OF_BOARD_SETUP=y
|
||||
CONFIG_CONSOLE_MUX=y
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
CONFIG_MISC_INIT_R=y
|
||||
# CONFIG_CMD_BDI is not set
|
||||
# CONFIG_CMD_IMI is not set
|
||||
CONFIG_CMD_EEPROM=y
|
||||
CONFIG_CMD_ADC=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_RANDOM_UUID=y
|
||||
CONFIG_CMD_I2C=y
|
||||
# CONFIG_CMD_LOADS is not set
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_USB=y
|
||||
CONFIG_CMD_USB_MASS_STORAGE=y
|
||||
CONFIG_CMD_RTC=y
|
||||
CONFIG_CMD_REGULATOR=y
|
||||
CONFIG_PARTITION_TYPE_GUID=y
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_NET_RANDOM_ETHADDR=y
|
||||
CONFIG_SARADC_MESON=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_SYS_I2C_MESON=y
|
||||
CONFIG_MMC_MESON_GX=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_PHY_MESON_GXL=y
|
||||
CONFIG_DM_ETH=y
|
||||
CONFIG_DM_MDIO=y
|
||||
CONFIG_DM_MDIO_MUX=y
|
||||
CONFIG_ETH_DESIGNWARE_MESON8B=y
|
||||
CONFIG_MDIO_MUX_MMIOREG=y
|
||||
CONFIG_MESON_GXL_USB_PHY=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCTRL_MESON_GXL=y
|
||||
CONFIG_DM_REGULATOR=y
|
||||
CONFIG_DM_REGULATOR_FIXED=y
|
||||
CONFIG_DM_RESET=y
|
||||
CONFIG_DM_RTC=y
|
||||
CONFIG_RTC_PCF8563=y
|
||||
CONFIG_DEBUG_UART_ANNOUNCE=y
|
||||
CONFIG_DEBUG_UART_SKIP_INIT=y
|
||||
CONFIG_MESON_SERIAL=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_XHCI_DWC3=y
|
||||
CONFIG_USB_DWC2=y
|
||||
CONFIG_USB_DWC3=y
|
||||
# CONFIG_USB_DWC3_GADGET is not set
|
||||
CONFIG_USB_DWC3_MESON_GXL=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
|
||||
CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
|
||||
CONFIG_USB_GADGET_DWC2_OTG=y
|
||||
CONFIG_USB_GADGET_DOWNLOAD=y
|
||||
CONFIG_OF_LIBFDT_OVERLAY=y
|
||||
Loading…
Reference in New Issue
Block a user