leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

arm64: dts: meson: sync dt and bindings from v5.6-rc2

Browse Source 
Sync the device tree and dt-bindings from Linux v5.6-rc2
11a48a5a18c6 ("Linux 5.6-rc2")

The only exception to this is the mmc pinctrl pin bias of gxl SoC family.
This is a fix which found its way to u-boot but not Linux yet.

Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
This commit is contained in:
Jerome Brunet 2020-03-05 12:12:38 +01:00 committed by Neil Armstrong
parent b3d69aa596
commit dd5f2351e9
36 changed files with 2119 additions and 623 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

70
arch/arm/dts/meson-axg-s400.dts
View File

@ -60,7 +60,7 @@
serial1 = &uart_A;
};
linein: audio-codec@0 {
linein: audio-codec-0 {
#sound-dai-cells = <0>;
compatible = "everest,es7241";
VDDA-supply = <&vcc_3v3>;
@ -70,7 +70,7 @@
sound-name-prefix = "Linein";
};
lineout: audio-codec@1 {
lineout: audio-codec-1 {
#sound-dai-cells = <0>;
compatible = "everest,es7154";
VDD-supply = <&vcc_3v3>;
@ -79,14 +79,14 @@
sound-name-prefix = "Lineout";
};
spdif_dit: audio-codec@2 {
spdif_dit: audio-codec-2 {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
status = "okay";
sound-name-prefix = "DIT";
};
dmics: audio-codec@3 {
dmics: audio-codec-3 {
#sound-dai-cells = <0>;
compatible = "dmic-codec";
num-channels = <7>;
@ -95,6 +95,13 @@
sound-name-prefix = "MIC";
};
spdif_dir: audio-codec-4 {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dir";
status = "okay";
sound-name-prefix = "DIR";
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
@ -249,6 +256,9 @@
"TODDR_A IN 2", "TDMIN_C OUT",
"TODDR_B IN 2", "TDMIN_C OUT",
"TODDR_C IN 2", "TDMIN_C OUT",
"TODDR_A IN 3", "SPDIFIN Capture",
"TODDR_B IN 3", "SPDIFIN Capture",
"TODDR_C IN 3", "SPDIFIN Capture",
"TODDR_A IN 4", "PDM Capture",
"TODDR_B IN 4", "PDM Capture",
"TODDR_C IN 4", "PDM Capture",
@ -272,31 +282,31 @@
<393216000>;
status = "okay";
dai-link@0 {
dai-link-0 {
sound-dai = <&frddr_a>;
};
dai-link@1 {
dai-link-1 {
sound-dai = <&frddr_b>;
};
dai-link@2 {
dai-link-2 {
sound-dai = <&frddr_c>;
};
dai-link@3 {
dai-link-3 {
sound-dai = <&toddr_a>;
};
dai-link@4 {
dai-link-4 {
sound-dai = <&toddr_b>;
};
dai-link@5 {
dai-link-5 {
sound-dai = <&toddr_c>;
};
dai-link@6 {
dai-link-6 {
sound-dai = <&tdmif_c>;
dai-format = "i2s";
dai-tdm-slot-tx-mask-2 = <1 1>;
@ -317,7 +327,7 @@
};
dai-link@7 {
dai-link-7 {
sound-dai = <&spdifout>;
codec {
@ -325,7 +335,15 @@
};
};
dai-link@8 {
dai-link-8 {
sound-dai = <&spdifin>;
codec {
sound-dai = <&spdif_dir>;
};
};
dai-link-9 {
sound-dai = <&pdm>;
codec {
@ -357,6 +375,8 @@
eth_phy0: ethernet-phy@0 {
/* Realtek RTL8211F (0x001cc916) */
reg = <0>;
interrupt-parent = <&gpio_intc>;
interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
eee-broken-1000t;
};
};
@ -444,7 +464,8 @@
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
sd-uhs-sdr104;
max-frequency = <200000000>;
non-removable;
disable-wp;
@ -461,15 +482,14 @@
/* emmc storage */
&sd_emmc_c {
status = "disabled";
pinctrl-0 = <&emmc_pins>;
status = "okay";
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <180000000>;
max-frequency = <200000000>;
non-removable;
disable-wp;
mmc-ddr-1_8v;
@ -481,6 +501,12 @@
vqmmc-supply = <&vddio_boot>;
};
&spdifin {
pinctrl-0 = <&spdif_in_a19_pins>;
pinctrl-names = "default";
status = "okay";
};
&spdifout {
pinctrl-0 = <&spdif_out_a20_pins>;
pinctrl-names = "default";
@ -543,8 +569,14 @@
&uart_A {
status = "okay";
pinctrl-0 = <&uart_a_pins>;
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
pinctrl-names = "default";
uart-has-rtscts;
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>;
};
};
&uart_AO {

273
arch/arm/dts/meson-axg.dtsi
View File

File diff suppressed because it is too large Load Diff

472
arch/arm/dts/meson-g12-common.dtsi
View File

@ -5,51 +5,42 @@
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/axg-audio-clkc.h>
#include <dt-bindings/clock/g12a-clkc.h>
#include <dt-bindings/clock/g12a-aoclkc.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
#include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
tdmif_a: audio-controller-0 {
compatible = "amlogic,axg-tdm-iface";
#sound-dai-cells = <0>;
sound-name-prefix = "TDM_A";
clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
<&clkc_audio AUD_CLKID_MST_A_SCLK>,
<&clkc_audio AUD_CLKID_MST_A_LRCLK>;
clock-names = "mclk", "sclk", "lrclk";
chosen {
#address-cells = <2>;
#size-cells = <2>;
ranges;
simplefb_cvbs: framebuffer-cvbs {
compatible = "amlogic,simple-framebuffer",
"simple-framebuffer";
amlogic,pipeline = "vpu-cvbs";
clocks = <&clkc CLKID_HDMI>,
<&clkc CLKID_HTX_PCLK>,
<&clkc CLKID_VPU_INTR>;
status = "disabled";
};
tdmif_b: audio-controller-1 {
compatible = "amlogic,axg-tdm-iface";
#sound-dai-cells = <0>;
sound-name-prefix = "TDM_B";
clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
<&clkc_audio AUD_CLKID_MST_B_SCLK>,
<&clkc_audio AUD_CLKID_MST_B_LRCLK>;
clock-names = "mclk", "sclk", "lrclk";
simplefb_hdmi: framebuffer-hdmi {
compatible = "amlogic,simple-framebuffer",
"simple-framebuffer";
amlogic,pipeline = "vpu-hdmi";
clocks = <&clkc CLKID_HDMI>,
<&clkc CLKID_HTX_PCLK>,
<&clkc CLKID_VPU_INTR>;
status = "disabled";
};
tdmif_c: audio-controller-2 {
compatible = "amlogic,axg-tdm-iface";
#sound-dai-cells = <0>;
sound-name-prefix = "TDM_C";
clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
<&clkc_audio AUD_CLKID_MST_C_SCLK>,
<&clkc_audio AUD_CLKID_MST_C_LRCLK>;
clock-names = "mclk", "sclk", "lrclk";
status = "disabled";
};
efuse: efuse {
@ -58,6 +49,7 @@
#address-cells = <1>;
#size-cells = <1>;
read-only;
secure-monitor = <&sm>;
};
psci {
@ -95,6 +87,94 @@
#size-cells = <2>;
ranges;
pcie: pcie@fc000000 {
compatible = "amlogic,g12a-pcie", "snps,dw-pcie";
reg = <0x0 0xfc000000 0x0 0x400000
0x0 0xff648000 0x0 0x2000
0x0 0xfc400000 0x0 0x200000>;
reg-names = "elbi", "cfg", "config";
interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
bus-range = <0x0 0xff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000
0x82000000 0 0xfc700000 0x0 0xfc700000 0 0x1900000>;
clocks = <&clkc CLKID_PCIE_PHY
&clkc CLKID_PCIE_COMB
&clkc CLKID_PCIE_PLL>;
clock-names = "general",
"pclk",
"port";
resets = <&reset RESET_PCIE_CTRL_A>,
<&reset RESET_PCIE_APB>;
reset-names = "port",
"apb";
num-lanes = <1>;
phys = <&usb3_pcie_phy PHY_TYPE_PCIE>;
phy-names = "pcie";
status = "disabled";
};
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay = <1000>;
polling-delay-passive = <100>;
thermal-sensors = <&cpu_temp>;
trips {
cpu_passive: cpu-passive {
temperature = <85000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
cpu_hot: cpu-hot {
temperature = <95000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "hot";
};
cpu_critical: cpu-critical {
temperature = <110000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "critical";
};
};
};
ddr_thermal: ddr-thermal {
polling-delay = <1000>;
polling-delay-passive = <100>;
thermal-sensors = <&ddr_temp>;
trips {
ddr_passive: ddr-passive {
temperature = <85000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
ddr_critical: ddr-critical {
temperature = <110000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "critical";
};
};
cooling-maps {
map {
trip = <&ddr_passive>;
cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
};
ethmac: ethernet@ff3f0000 {
compatible = "amlogic,meson-axg-dwmac",
"snps,dwmac-3.70a",
@ -1356,6 +1436,26 @@
};
};
cpu_temp: temperature-sensor@34800 {
compatible = "amlogic,g12a-cpu-thermal",
"amlogic,g12a-thermal";
reg = <0x0 0x34800 0x0 0x50>;
interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_TS>;
#thermal-sensor-cells = <0>;
amlogic,ao-secure = <&sec_AO>;
};
ddr_temp: temperature-sensor@34c00 {
compatible = "amlogic,g12a-ddr-thermal",
"amlogic,g12a-thermal";
reg = <0x0 0x34c00 0x0 0x50>;
interrupts = <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_TS>;
#thermal-sensor-cells = <0>;
amlogic,ao-secure = <&sec_AO>;
};
usb2_phy0: phy@36000 {
compatible = "amlogic,g12a-usb2-phy";
reg = <0x0 0x36000 0x0 0x2000>;
@ -1457,290 +1557,6 @@
};
};
pdm: audio-controller@40000 {
compatible = "amlogic,g12a-pdm",
"amlogic,axg-pdm";
reg = <0x0 0x40000 0x0 0x34>;
#sound-dai-cells = <0>;
sound-name-prefix = "PDM";
clocks = <&clkc_audio AUD_CLKID_PDM>,
<&clkc_audio AUD_CLKID_PDM_DCLK>,
<&clkc_audio AUD_CLKID_PDM_SYSCLK>;
clock-names = "pclk", "dclk", "sysclk";
status = "disabled";
};
audio: bus@42000 {
compatible = "simple-bus";
reg = <0x0 0x42000 0x0 0x2000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>;
clkc_audio: clock-controller@0 {
status = "disabled";
compatible = "amlogic,g12a-audio-clkc";
reg = <0x0 0x0 0x0 0xb4>;
#clock-cells = <1>;
#reset-cells = <1>;
clocks = <&clkc CLKID_AUDIO>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL3>,
<&clkc CLKID_HIFI_PLL>,
<&clkc CLKID_FCLK_DIV3>,
<&clkc CLKID_FCLK_DIV4>,
<&clkc CLKID_GP0_PLL>;
clock-names = "pclk",
"mst_in0",
"mst_in1",
"mst_in2",
"mst_in3",
"mst_in4",
"mst_in5",
"mst_in6",
"mst_in7";
resets = <&reset RESET_AUDIO>;
};
toddr_a: audio-controller@100 {
compatible = "amlogic,g12a-toddr",
"amlogic,axg-toddr";
reg = <0x0 0x100 0x0 0x1c>;
#sound-dai-cells = <0>;
sound-name-prefix = "TODDR_A";
interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
resets = <&arb AXG_ARB_TODDR_A>;
status = "disabled";
};
toddr_b: audio-controller@140 {
compatible = "amlogic,g12a-toddr",
"amlogic,axg-toddr";
reg = <0x0 0x140 0x0 0x1c>;
#sound-dai-cells = <0>;
sound-name-prefix = "TODDR_B";
interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
resets = <&arb AXG_ARB_TODDR_B>;
status = "disabled";
};
toddr_c: audio-controller@180 {
compatible = "amlogic,g12a-toddr",
"amlogic,axg-toddr";
reg = <0x0 0x180 0x0 0x1c>;
#sound-dai-cells = <0>;
sound-name-prefix = "TODDR_C";
interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
resets = <&arb AXG_ARB_TODDR_C>;
status = "disabled";
};
frddr_a: audio-controller@1c0 {
compatible = "amlogic,g12a-frddr",
"amlogic,axg-frddr";
reg = <0x0 0x1c0 0x0 0x1c>;
#sound-dai-cells = <0>;
sound-name-prefix = "FRDDR_A";
interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
resets = <&arb AXG_ARB_FRDDR_A>;
status = "disabled";
};
frddr_b: audio-controller@200 {
compatible = "amlogic,g12a-frddr",
"amlogic,axg-frddr";
reg = <0x0 0x200 0x0 0x1c>;
#sound-dai-cells = <0>;
sound-name-prefix = "FRDDR_B";
interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
resets = <&arb AXG_ARB_FRDDR_B>;
status = "disabled";
};
frddr_c: audio-controller@240 {
compatible = "amlogic,g12a-frddr",
"amlogic,axg-frddr";
reg = <0x0 0x240 0x0 0x1c>;
#sound-dai-cells = <0>;
sound-name-prefix = "FRDDR_C";
interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
resets = <&arb AXG_ARB_FRDDR_C>;
status = "disabled";
};
arb: reset-controller@280 {
status = "disabled";
compatible = "amlogic,meson-axg-audio-arb";
reg = <0x0 0x280 0x0 0x4>;
#reset-cells = <1>;
clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
};
tdmin_a: audio-controller@300 {
compatible = "amlogic,g12a-tdmin",
"amlogic,axg-tdmin";
reg = <0x0 0x300 0x0 0x40>;
sound-name-prefix = "TDMIN_A";
resets = <&clkc_audio AUD_RESET_TDMIN_A>;
clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
<&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
<&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
<&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
tdmin_b: audio-controller@340 {
compatible = "amlogic,g12a-tdmin",
"amlogic,axg-tdmin";
reg = <0x0 0x340 0x0 0x40>;
sound-name-prefix = "TDMIN_B";
resets = <&clkc_audio AUD_RESET_TDMIN_B>;
clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
<&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
<&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
<&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
tdmin_c: audio-controller@380 {
compatible = "amlogic,g12a-tdmin",
"amlogic,axg-tdmin";
reg = <0x0 0x380 0x0 0x40>;
sound-name-prefix = "TDMIN_C";
resets = <&clkc_audio AUD_RESET_TDMIN_C>;
clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
<&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
<&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
<&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
tdmin_lb: audio-controller@3c0 {
compatible = "amlogic,g12a-tdmin",
"amlogic,axg-tdmin";
reg = <0x0 0x3c0 0x0 0x40>;
sound-name-prefix = "TDMIN_LB";
resets = <&clkc_audio AUD_RESET_TDMIN_LB>;
clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
<&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
<&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
<&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
spdifin: audio-controller@400 {
compatible = "amlogic,g12a-spdifin",
"amlogic,axg-spdifin";
reg = <0x0 0x400 0x0 0x30>;
#sound-dai-cells = <0>;
sound-name-prefix = "SPDIFIN";
interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
<&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
clock-names = "pclk", "refclk";
status = "disabled";
};
spdifout: audio-controller@480 {
compatible = "amlogic,g12a-spdifout",
"amlogic,axg-spdifout";
reg = <0x0 0x480 0x0 0x50>;
#sound-dai-cells = <0>;
sound-name-prefix = "SPDIFOUT";
clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
<&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
clock-names = "pclk", "mclk";
status = "disabled";
};
tdmout_a: audio-controller@500 {
compatible = "amlogic,g12a-tdmout";
reg = <0x0 0x500 0x0 0x40>;
sound-name-prefix = "TDMOUT_A";
resets = <&clkc_audio AUD_RESET_TDMOUT_A>;
clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
<&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
tdmout_b: audio-controller@540 {
compatible = "amlogic,g12a-tdmout";
reg = <0x0 0x540 0x0 0x40>;
sound-name-prefix = "TDMOUT_B";
resets = <&clkc_audio AUD_RESET_TDMOUT_B>;
clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
<&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
tdmout_c: audio-controller@580 {
compatible = "amlogic,g12a-tdmout";
reg = <0x0 0x580 0x0 0x40>;
sound-name-prefix = "TDMOUT_C";
resets = <&clkc_audio AUD_RESET_TDMOUT_C>;
clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
<&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
spdifout_b: audio-controller@680 {
compatible = "amlogic,g12a-spdifout",
"amlogic,axg-spdifout";
reg = <0x0 0x680 0x0 0x50>;
#sound-dai-cells = <0>;
sound-name-prefix = "SPDIFOUT_B";
clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>,
<&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>;
clock-names = "pclk", "mclk";
status = "disabled";
};
tohdmitx: audio-controller@744 {
compatible = "amlogic,g12a-tohdmitx";
reg = <0x0 0x744 0x0 0x4>;
#sound-dai-cells = <1>;
sound-name-prefix = "TOHDMITX";
status = "disabled";
};
};
usb3_pcie_phy: phy@46000 {
compatible = "amlogic,g12a-usb3-pcie-phy";
reg = <0x0 0x46000 0x0 0x2000>;
@ -2152,6 +1968,29 @@
};
};
vdec: video-decoder@ff620000 {
compatible = "amlogic,g12a-vdec";
reg = <0x0 0xff620000 0x0 0x10000>,
<0x0 0xffd0e180 0x0 0xe4>;
reg-names = "dos", "esparser";
interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "vdec", "esparser";
amlogic,ao-sysctrl = <&rti>;
amlogic,canvas = <&canvas>;
clocks = <&clkc CLKID_PARSER>,
<&clkc CLKID_DOS>,
<&clkc CLKID_VDEC_1>,
<&clkc CLKID_VDEC_HEVC>,
<&clkc CLKID_VDEC_HEVCF>;
clock-names = "dos_parser", "dos", "vdec_1",
"vdec_hevc", "vdec_hevcf";
resets = <&reset RESET_PARSER>;
reset-names = "esparser";
};
vpu: vpu@ff900000 {
compatible = "amlogic,meson-g12a-vpu";
reg = <0x0 0xff900000 0x0 0x100000>,
@ -2388,10 +2227,10 @@
compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost";
reg = <0x0 0xffe40000 0x0 0x40000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gpu", "mmu", "job";
<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "job", "mmu", "gpu";
clocks = <&clkc CLKID_MALI>;
resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>;
@ -2409,6 +2248,7 @@
assigned-clock-rates = <0>, /* Do Nothing */
<800000000>,
<0>; /* Do Nothing */
#cooling-cells = <2>;
};
};

398
arch/arm/dts/meson-g12.dtsi Normal file
View File

@ -0,0 +1,398 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2019 BayLibre, SAS
* Author: Jerome Brunet <jbrunet@baylibre.com>
*/
#include "meson-g12-common.dtsi"
#include <dt-bindings/clock/axg-audio-clkc.h>
#include <dt-bindings/power/meson-g12a-power.h>
#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
/ {
tdmif_a: audio-controller-0 {
compatible = "amlogic,axg-tdm-iface";
#sound-dai-cells = <0>;
sound-name-prefix = "TDM_A";
clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
<&clkc_audio AUD_CLKID_MST_A_SCLK>,
<&clkc_audio AUD_CLKID_MST_A_LRCLK>;
clock-names = "mclk", "sclk", "lrclk";
status = "disabled";
};
tdmif_b: audio-controller-1 {
compatible = "amlogic,axg-tdm-iface";
#sound-dai-cells = <0>;
sound-name-prefix = "TDM_B";
clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
<&clkc_audio AUD_CLKID_MST_B_SCLK>,
<&clkc_audio AUD_CLKID_MST_B_LRCLK>;
clock-names = "mclk", "sclk", "lrclk";
status = "disabled";
};
tdmif_c: audio-controller-2 {
compatible = "amlogic,axg-tdm-iface";
#sound-dai-cells = <0>;
sound-name-prefix = "TDM_C";
clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
<&clkc_audio AUD_CLKID_MST_C_SCLK>,
<&clkc_audio AUD_CLKID_MST_C_LRCLK>;
clock-names = "mclk", "sclk", "lrclk";
status = "disabled";
};
};
&apb {
pdm: audio-controller@40000 {
compatible = "amlogic,g12a-pdm",
"amlogic,axg-pdm";
reg = <0x0 0x40000 0x0 0x34>;
#sound-dai-cells = <0>;
sound-name-prefix = "PDM";
clocks = <&clkc_audio AUD_CLKID_PDM>,
<&clkc_audio AUD_CLKID_PDM_DCLK>,
<&clkc_audio AUD_CLKID_PDM_SYSCLK>;
clock-names = "pclk", "dclk", "sysclk";
status = "disabled";
};
audio: bus@42000 {
compatible = "simple-bus";
reg = <0x0 0x42000 0x0 0x2000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>;
clkc_audio: clock-controller@0 {
status = "disabled";
compatible = "amlogic,g12a-audio-clkc";
reg = <0x0 0x0 0x0 0xb4>;
#clock-cells = <1>;
#reset-cells = <1>;
clocks = <&clkc CLKID_AUDIO>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL3>,
<&clkc CLKID_HIFI_PLL>,
<&clkc CLKID_FCLK_DIV3>,
<&clkc CLKID_FCLK_DIV4>,
<&clkc CLKID_GP0_PLL>;
clock-names = "pclk",
"mst_in0",
"mst_in1",
"mst_in2",
"mst_in3",
"mst_in4",
"mst_in5",
"mst_in6",
"mst_in7";
resets = <&reset RESET_AUDIO>;
};
toddr_a: audio-controller@100 {
compatible = "amlogic,g12a-toddr",
"amlogic,axg-toddr";
reg = <0x0 0x100 0x0 0x2c>;
#sound-dai-cells = <0>;
sound-name-prefix = "TODDR_A";
interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
resets = <&arb AXG_ARB_TODDR_A>,
<&clkc_audio AUD_RESET_TODDR_A>;
reset-names = "arb", "rst";
amlogic,fifo-depth = <512>;
status = "disabled";
};
toddr_b: audio-controller@140 {
compatible = "amlogic,g12a-toddr",
"amlogic,axg-toddr";
reg = <0x0 0x140 0x0 0x2c>;
#sound-dai-cells = <0>;
sound-name-prefix = "TODDR_B";
interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
resets = <&arb AXG_ARB_TODDR_B>,
<&clkc_audio AUD_RESET_TODDR_B>;
reset-names = "arb", "rst";
amlogic,fifo-depth = <256>;
status = "disabled";
};
toddr_c: audio-controller@180 {
compatible = "amlogic,g12a-toddr",
"amlogic,axg-toddr";
reg = <0x0 0x180 0x0 0x2c>;
#sound-dai-cells = <0>;
sound-name-prefix = "TODDR_C";
interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
resets = <&arb AXG_ARB_TODDR_C>,
<&clkc_audio AUD_RESET_TODDR_C>;
reset-names = "arb", "rst";
amlogic,fifo-depth = <256>;
status = "disabled";
};
frddr_a: audio-controller@1c0 {
compatible = "amlogic,g12a-frddr",
"amlogic,axg-frddr";
reg = <0x0 0x1c0 0x0 0x2c>;
#sound-dai-cells = <0>;
sound-name-prefix = "FRDDR_A";
interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
resets = <&arb AXG_ARB_FRDDR_A>,
<&clkc_audio AUD_RESET_FRDDR_A>;
reset-names = "arb", "rst";
amlogic,fifo-depth = <512>;
status = "disabled";
};
frddr_b: audio-controller@200 {
compatible = "amlogic,g12a-frddr",
"amlogic,axg-frddr";
reg = <0x0 0x200 0x0 0x2c>;
#sound-dai-cells = <0>;
sound-name-prefix = "FRDDR_B";
interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
resets = <&arb AXG_ARB_FRDDR_B>,
<&clkc_audio AUD_RESET_FRDDR_B>;
reset-names = "arb", "rst";
amlogic,fifo-depth = <256>;
status = "disabled";
};
frddr_c: audio-controller@240 {
compatible = "amlogic,g12a-frddr",
"amlogic,axg-frddr";
reg = <0x0 0x240 0x0 0x2c>;
#sound-dai-cells = <0>;
sound-name-prefix = "FRDDR_C";
interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
resets = <&arb AXG_ARB_FRDDR_C>,
<&clkc_audio AUD_RESET_FRDDR_C>;
reset-names = "arb", "rst";
amlogic,fifo-depth = <256>;
status = "disabled";
};
arb: reset-controller@280 {
status = "disabled";
compatible = "amlogic,meson-axg-audio-arb";
reg = <0x0 0x280 0x0 0x4>;
#reset-cells = <1>;
clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
};
tdmin_a: audio-controller@300 {
compatible = "amlogic,g12a-tdmin",
"amlogic,axg-tdmin";
reg = <0x0 0x300 0x0 0x40>;
sound-name-prefix = "TDMIN_A";
resets = <&clkc_audio AUD_RESET_TDMIN_A>;
clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
<&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
<&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
<&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
tdmin_b: audio-controller@340 {
compatible = "amlogic,g12a-tdmin",
"amlogic,axg-tdmin";
reg = <0x0 0x340 0x0 0x40>;
sound-name-prefix = "TDMIN_B";
resets = <&clkc_audio AUD_RESET_TDMIN_B>;
clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
<&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
<&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
<&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
tdmin_c: audio-controller@380 {
compatible = "amlogic,g12a-tdmin",
"amlogic,axg-tdmin";
reg = <0x0 0x380 0x0 0x40>;
sound-name-prefix = "TDMIN_C";
resets = <&clkc_audio AUD_RESET_TDMIN_C>;
clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
<&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
<&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
<&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
tdmin_lb: audio-controller@3c0 {
compatible = "amlogic,g12a-tdmin",
"amlogic,axg-tdmin";
reg = <0x0 0x3c0 0x0 0x40>;
sound-name-prefix = "TDMIN_LB";
resets = <&clkc_audio AUD_RESET_TDMIN_LB>;
clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
<&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
<&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
<&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
spdifin: audio-controller@400 {
compatible = "amlogic,g12a-spdifin",
"amlogic,axg-spdifin";
reg = <0x0 0x400 0x0 0x30>;
#sound-dai-cells = <0>;
sound-name-prefix = "SPDIFIN";
interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
<&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
clock-names = "pclk", "refclk";
resets = <&clkc_audio AUD_RESET_SPDIFIN>;
status = "disabled";
};
spdifout: audio-controller@480 {
compatible = "amlogic,g12a-spdifout",
"amlogic,axg-spdifout";
reg = <0x0 0x480 0x0 0x50>;
#sound-dai-cells = <0>;
sound-name-prefix = "SPDIFOUT";
clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
<&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
clock-names = "pclk", "mclk";
resets = <&clkc_audio AUD_RESET_SPDIFOUT>;
status = "disabled";
};
tdmout_a: audio-controller@500 {
compatible = "amlogic,g12a-tdmout";
reg = <0x0 0x500 0x0 0x40>;
sound-name-prefix = "TDMOUT_A";
resets = <&clkc_audio AUD_RESET_TDMOUT_A>;
clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
<&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
tdmout_b: audio-controller@540 {
compatible = "amlogic,g12a-tdmout";
reg = <0x0 0x540 0x0 0x40>;
sound-name-prefix = "TDMOUT_B";
resets = <&clkc_audio AUD_RESET_TDMOUT_B>;
clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
<&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
tdmout_c: audio-controller@580 {
compatible = "amlogic,g12a-tdmout";
reg = <0x0 0x580 0x0 0x40>;
sound-name-prefix = "TDMOUT_C";
resets = <&clkc_audio AUD_RESET_TDMOUT_C>;
clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
<&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
spdifout_b: audio-controller@680 {
compatible = "amlogic,g12a-spdifout",
"amlogic,axg-spdifout";
reg = <0x0 0x680 0x0 0x50>;
#sound-dai-cells = <0>;
sound-name-prefix = "SPDIFOUT_B";
clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>,
<&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>;
clock-names = "pclk", "mclk";
resets = <&clkc_audio AUD_RESET_SPDIFOUT_B>;
status = "disabled";
};
tohdmitx: audio-controller@744 {
compatible = "amlogic,g12a-tohdmitx";
reg = <0x0 0x744 0x0 0x4>;
#sound-dai-cells = <1>;
sound-name-prefix = "TOHDMITX";
resets = <&clkc_audio AUD_RESET_TOHDMITX>;
status = "disabled";
};
};
};
&cpu_thermal {
cooling-maps {
map0 {
trip = <&cpu_passive>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu_hot>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
&ethmac {
power-domains = <&pwrc PWRC_G12A_ETH_ID>;
};
&vpu {
power-domains = <&pwrc PWRC_G12A_VPU_ID>;
};
&sd_emmc_a {
amlogic,dram-access-quirk;
};
&simplefb_cvbs {
power-domains = <&pwrc PWRC_G12A_VPU_ID>;
};
&simplefb_hdmi {
power-domains = <&pwrc PWRC_G12A_VPU_ID>;
};

64
arch/arm/dts/meson-g12a-sei510.dts
View File

@ -129,6 +129,25 @@
enable-active-high;
};
vddcpu: regulator-vddcpu {
/*
* SY8120B1ABC DC/DC Regulator.
*/
compatible = "pwm-regulator";
regulator-name = "VDDCPU";
regulator-min-microvolt = <721000>;
regulator-max-microvolt = <1022000>;
vin-supply = <&dc_in>;
pwms = <&pwm_AO_cd 1 1250 0>;
pwm-dutycycle-range = <100 0>;
regulator-boot-on;
regulator-always-on;
};
vddio_ao1v8: regulator-vddio_ao1v8 {
compatible = "regulator-fixed";
regulator-name = "VDDIO_AO1V8";
@ -297,6 +316,34 @@
status = "okay";
};
&cpu0 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
};
&cpu1 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
};
&cpu2 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
};
&cpu3 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
};
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
@ -339,6 +386,20 @@
pinctrl-names = "default";
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
&pwm_AO_cd {
pinctrl-0 = <&pwm_ao_d_e_pins>;
pinctrl-names = "default";
clocks = <&xtal>;
clock-names = "clkin1";
status = "okay";
};
&pwm_ef {
status = "okay";
pinctrl-0 = <&pwm_e_pins>;
@ -377,6 +438,9 @@
non-removable;
disable-wp;
/* WiFi firmware requires power to be kept while in suspend */
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vddao_3v3>;

54
arch/arm/dts/meson-g12a-u200.dts
View File

@ -129,6 +129,24 @@
regulator-always-on;
};
vddcpu: regulator-vddcpu {
/*
* MP8756GD Regulator.
*/
compatible = "pwm-regulator";
regulator-name = "VDDCPU";
regulator-min-microvolt = <721000>;
regulator-max-microvolt = <1022000>;
vin-supply = <&main_12v>;
pwms = <&pwm_AO_cd 1 1250 0>;
pwm-dutycycle-range = <100 0>;
regulator-boot-on;
regulator-always-on;
};
};
&cec_AO {
@ -145,6 +163,34 @@
hdmi-phandle = <&hdmi_tx>;
};
&cpu0 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
};
&cpu1 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
};
&cpu2 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
};
&cpu3 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
};
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
@ -197,6 +243,14 @@
pinctrl-names = "default";
};
&pwm_AO_cd {
pinctrl-0 = <&pwm_ao_d_e_pins>;
pinctrl-names = "default";
clocks = <&xtal>;
clock-names = "clkin1";
status = "okay";
};
/* SD card */
&sd_emmc_b {
status = "okay";

29
arch/arm/dts/meson-g12a.dtsi
View File

@ -3,8 +3,7 @@
* Copyright (c) 2018 Amlogic, Inc. All rights reserved.
*/
#include "meson-g12-common.dtsi"
#include <dt-bindings/power/meson-g12a-power.h>
#include "meson-g12.dtsi"
/ {
compatible = "amlogic,g12a";
@ -19,6 +18,7 @@
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
cpu1: cpu@1 {
@ -27,6 +27,7 @@
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
cpu2: cpu@2 {
@ -35,6 +36,7 @@
reg = <0x0 0x2>;
enable-method = "psci";
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
cpu3: cpu@3 {
@ -43,6 +45,7 @@
reg = <0x0 0x3>;
enable-method = "psci";
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
l2: l2-cache0 {
@ -111,14 +114,22 @@
};
};
&ethmac {
power-domains = <&pwrc PWRC_G12A_ETH_ID>;
&cpu_thermal {
cooling-maps {
map0 {
trip = <&cpu_passive>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
&vpu {
power-domains = <&pwrc PWRC_G12A_VPU_ID>;
map1 {
trip = <&cpu_hot>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
&sd_emmc_a {
amlogic,dram-access-quirk;
};

25
arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts
View File

@ -14,3 +14,28 @@
/ {
compatible = "khadas,vim3", "amlogic,a311d", "amlogic,g12b";
};
/*
* The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential
* lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
* an USB3.0 Type A connector and a M.2 Key M slot.
* The PHY driving these differential lines is shared between
* the USB3.0 controller and the PCIe Controller, thus only
* a single controller can use it.
* If the MCU is configured to mux the PCIe/USB3.0 differential lines
* to the M.2 Key M slot, uncomment the following block to disable
* USB3.0 from the USB Complex and enable the PCIe controller.
* The End User is not expected to uncomment the following except for
* testing purposes, but instead rely on the firmware/bootloader to
* update these nodes accordingly if PCIe mode is selected by the MCU.
*/
/*
&pcie {
status = "okay";
};
&usb {
phys = <&usb2_phy0>, <&usb2_phy1>;
phy-names = "usb2-phy0", "usb2-phy1";
};
*/

2
arch/arm/dts/meson-g12b-odroid-n2.dts
View File

@ -12,7 +12,7 @@
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
/ {
compatible = "hardkernel,odroid-n2", "amlogic,g12b";
compatible = "hardkernel,odroid-n2", "amlogic,s922x", "amlogic,g12b";
model = "Hardkernel ODROID-N2";
aliases {

26
arch/arm/dts/meson-g12b.dtsi
View File

@ -4,8 +4,7 @@
* Author: Neil Armstrong <narmstrong@baylibre.com>
*/
#include "meson-g12-common.dtsi"
#include <dt-bindings/power/meson-g12a-power.h>
#include "meson-g12.dtsi"
/ {
compatible = "amlogic,g12b";
@ -49,7 +48,9 @@
compatible = "arm,cortex-a53";
reg = <0x0 0x0>;
enable-method = "psci";
capacity-dmips-mhz = <592>;
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
cpu1: cpu@1 {
@ -57,7 +58,9 @@
compatible = "arm,cortex-a53";
reg = <0x0 0x1>;
enable-method = "psci";
capacity-dmips-mhz = <592>;
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
cpu100: cpu@100 {
@ -65,7 +68,9 @@
compatible = "arm,cortex-a73";
reg = <0x0 0x100>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
cpu101: cpu@101 {
@ -73,7 +78,9 @@
compatible = "arm,cortex-a73";
reg = <0x0 0x101>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
cpu102: cpu@102 {
@ -81,7 +88,9 @@
compatible = "arm,cortex-a73";
reg = <0x0 0x102>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
cpu103: cpu@103 {
@ -89,7 +98,9 @@
compatible = "arm,cortex-a73";
reg = <0x0 0x103>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
l2: l2-cache0 {
@ -102,14 +113,3 @@
compatible = "amlogic,g12b-clkc";
};
&ethmac {
power-domains = <&pwrc PWRC_G12A_ETH_ID>;
};
&vpu {
power-domains = <&pwrc PWRC_G12A_VPU_ID>;
};
&sd_emmc_a {
amlogic,dram-access-quirk;
};

87
arch/arm/dts/meson-gx.dtsi
View File

@ -50,13 +50,35 @@
};
};
chosen {
#address-cells = <2>;
#size-cells = <2>;
ranges;
simplefb_cvbs: framebuffer-cvbs {
compatible = "amlogic,simple-framebuffer",
"simple-framebuffer";
amlogic,pipeline = "vpu-cvbs";
power-domains = <&pwrc_vpu>;
status = "disabled";
};
simplefb_hdmi: framebuffer-hdmi {
compatible = "amlogic,simple-framebuffer",
"simple-framebuffer";
amlogic,pipeline = "vpu-hdmi";
power-domains = <&pwrc_vpu>;
status = "disabled";
};
};
cpus {
#address-cells = <0x2>;
#size-cells = <0x0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
compatible = "arm,cortex-a53";
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&l2>;
@ -65,7 +87,7 @@
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
compatible = "arm,cortex-a53";
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&l2>;
@ -74,7 +96,7 @@
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
compatible = "arm,cortex-a53";
reg = <0x0 0x2>;
enable-method = "psci";
next-level-cache = <&l2>;
@ -83,7 +105,7 @@
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
compatible = "arm,cortex-a53";
reg = <0x0 0x3>;
enable-method = "psci";
next-level-cache = <&l2>;
@ -139,6 +161,7 @@
#address-cells = <1>;
#size-cells = <1>;
read-only;
secure-monitor = <&sm>;
sn: sn@14 {
reg = <0x14 0x10>;
@ -198,7 +221,7 @@
};
reset: reset-controller@4404 {
compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset";
compatible = "amlogic,meson-gxbb-reset";
reg = <0x0 0x04404 0x0 0x9c>;
#reset-cells = <1>;
};
@ -218,7 +241,7 @@
};
i2c_A: i2c@8500 {
compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x08500 0x0 0x20>;
interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
@ -262,8 +285,13 @@
status = "disabled";
};
clock-measure@8758 {
compatible = "amlogic,meson-gx-clk-measure";
reg = <0x0 0x8758 0x0 0x10>;
};
i2c_B: i2c@87c0 {
compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x087c0 0x0 0x20>;
interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
@ -272,7 +300,7 @@
};
i2c_C: i2c@87e0 {
compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x087e0 0x0 0x20>;
interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
@ -290,7 +318,7 @@
};
spifc: spi@8c80 {
compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc";
compatible = "amlogic,meson-gxbb-spifc";
reg = <0x0 0x08c80 0x0 0x80>;
#address-cells = <1>;
#size-cells = <0>;
@ -298,7 +326,7 @@
};
watchdog@98d0 {
compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
compatible = "amlogic,meson-gxbb-wdt";
reg = <0x0 0x098d0 0x0 0x10>;
clocks = <&xtal>;
};
@ -364,6 +392,7 @@
compatible = "amlogic,meson-gx-ao-cec";
reg = <0x0 0x00100 0x0 0x14>;
interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
sec_AO: ao-secure@140 {
@ -387,7 +416,7 @@
};
i2c_AO: i2c@500 {
compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x500 0x0 0x20>;
interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
@ -410,7 +439,21 @@
};
};
periphs: periphs@c8834000 {
vdec: video-codec@c8820000 {
compatible = "amlogic,gx-vdec";
reg = <0x0 0xc8820000 0x0 0x10000>,
<0x0 0xc110a580 0x0 0xe4>;
reg-names = "dos", "esparser";
interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "vdec", "esparser";
amlogic,ao-sysctrl = <&sysctrl_AO>;
amlogic,canvas = <&canvas>;
};
periphs: bus@c8834000 {
compatible = "simple-bus";
reg = <0x0 0xc8834000 0x0 0x2000>;
#address-cells = <2>;
@ -449,7 +492,7 @@
};
mailbox: mailbox@404 {
compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
compatible = "amlogic,meson-gxbb-mhu";
reg = <0 0x404 0 0x4c>;
interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
@ -459,11 +502,15 @@
};
ethmac: ethernet@c9410000 {
compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
reg = <0x0 0xc9410000 0x0 0x10000
0x0 0xc8834540 0x0 0x4>;
interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
compatible = "amlogic,meson-gxbb-dwmac",
"snps,dwmac-3.70a",
"snps,dwmac";
reg = <0x0 0xc9410000 0x0 0x10000>,
<0x0 0xc8834540 0x0 0x4>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
rx-fifo-depth = <4096>;
tx-fifo-depth = <2048>;
status = "disabled";
};
@ -499,12 +546,12 @@
vpu: vpu@d0100000 {
compatible = "amlogic,meson-gx-vpu";
reg = <0x0 0xd0100000 0x0 0x100000>,
<0x0 0xc883c000 0x0 0x1000>,
<0x0 0xc8838000 0x0 0x1000>;
reg-names = "vpu", "hhi", "dmc";
<0x0 0xc883c000 0x0 0x1000>;
reg-names = "vpu", "hhi";
interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
amlogic,canvas = <&canvas>;
/* CVBS VDAC output port */
cvbs_vdac_port: port@0 {

26
arch/arm/dts/meson-gxbb-nanopi-k2.dts
View File

@ -10,6 +10,7 @@
/ {
compatible = "friendlyarm,nanopi-k2", "amlogic,meson-gxbb";
model = "FriendlyARM NanoPi K2";
aliases {
serial0 = &uart_AO;
@ -154,10 +155,6 @@
amlogic,tx-delay-ns = <2>;
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-active-low;
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
@ -166,6 +163,11 @@
eth_phy0: ethernet-phy@0 {
/* Realtek RTL8211F (0x001cc916) */
reg = <0>;
reset-assert-us = <10000>;
reset-deassert-us = <30000>;
reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_15 */
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
@ -191,7 +193,7 @@
pinctrl-names = "default";
};
&pinctrl_aobus {
&gpio_ao {
gpio-line-names = "UART TX", "UART RX", "Power Control", "Power Key In",
"VCCK En", "CON1 Header Pin31",
"I2S Header Pin6", "IR In", "I2S Header Pin7",
@ -201,7 +203,7 @@
"";
};
&pinctrl_periphs {
&gpio {
gpio-line-names = /* Bank GPIOZ */
"Eth MDIO", "Eth MDC", "Eth RGMII RX Clk",
"Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2",
@ -273,11 +275,14 @@
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <200000000>;
max-frequency = <50000000>;
non-removable;
disable-wp;
/* WiFi firmware requires power to be kept while in suspend */
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vddio_ao3v3>;
@ -301,12 +306,11 @@
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
max-frequency = <200000000>;
sd-uhs-ddr50;
max-frequency = <100000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
cd-inverted;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vddio_ao3v3>;
vqmmc-supply = <&vddio_tf>;

100
arch/arm/dts/meson-gxbb-odroidc2.dts
View File

@ -36,8 +36,15 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
/*
* signal name from schematics: PWREN
*/
gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
enable-active-high;
/*
* signal name from schematics: USB_POWER
*/
vin-supply = <&p5v0>;
};
leds {
@ -50,18 +57,38 @@
};
};
p5v0: regulator-p5v0 {
compatible = "regulator-fixed";
regulator-name = "P5V0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
hdmi_p5v0: regulator-hdmi_p5v0 {
compatible = "regulator-fixed";
regulator-name = "HDMI_P5V0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
/* AP2331SA-7 */
vin-supply = <&p5v0>;
};
tflash_vdd: regulator-tflash_vdd {
/*
* signal name from schematics: TFLASH_VDD_EN
*/
compatible = "regulator-fixed";
regulator-name = "TFLASH_VDD";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
/*
* signal name from schematics: TFLASH_VDD_EN
*/
gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
enable-active-high;
/* U16 RT9179GB */
vin-supply = <&vddio_ao3v3>;
};
tf_io: gpio-regulator-tf_io {
@ -77,8 +104,10 @@
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
gpios-states = <0>;
states = <3300000 0
1800000 1>;
states = <3300000 0>,
<1800000 1>;
/* U12/U13 RT9179GB */
vin-supply = <&vddio_ao3v3>;
};
vcc1v8: regulator-vcc1v8 {
@ -86,6 +115,9 @@
regulator-name = "VCC1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
/* U18 RT9179GB */
vin-supply = <&vddio_ao3v3>;
};
vcc3v3: regulator-vcc3v3 {
@ -95,6 +127,36 @@
regulator-max-microvolt = <3300000>;
};
vddio_ao1v8: regulator-vddio-ao1v8 {
compatible = "regulator-fixed";
regulator-name = "VDDIO_AO1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
/* U17 RT9179GB */
vin-supply = <&p5v0>;
};
vddio_ao3v3: regulator-vddio-ao3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDIO_AO3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
/* U11 MP2161GJ-C499 */
vin-supply = <&p5v0>;
};
ddr3_1v5: regulator-ddr3_1v5 {
compatible = "regulator-fixed";
regulator-name = "DDR3_1V5";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
/* U15 MP2161GJ-C499 */
vin-supply = <&p5v0>;
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
@ -126,10 +188,6 @@
phy-handle = <&eth_phy0>;
phy-mode = "rgmii";
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-active-low;
amlogic,tx-delay-ns = <2>;
mdio {
@ -140,10 +198,14 @@
eth_phy0: ethernet-phy@0 {
/* Realtek RTL8211F (0x001cc916) */
reg = <0>;
reset-assert-us = <10000>;
reset-deassert-us = <30000>;
reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_15 */
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
eee-broken-1000t;
};
};
};
@ -167,6 +229,7 @@
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
hdmi-supply = <&hdmi_p5v0>;
};
&hdmi_tx_tmds_port {
@ -187,7 +250,7 @@
pinctrl-names = "default";
};
&pinctrl_aobus {
&gpio_ao {
gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En",
"USB HUB nRESET", "USB OTG Power En",
"J7 Header Pin2", "IR In", "J7 Header Pin4",
@ -197,7 +260,7 @@
"";
};
&pinctrl_periphs {
&gpio {
gpio-line-names = /* Bank GPIOZ */
"Eth MDIO", "Eth MDC", "Eth RGMII RX Clk",
"Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2",
@ -256,11 +319,14 @@
bus-width = <4>;
cap-sd-highspeed;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-ddr50;
max-frequency = <100000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
cd-inverted;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&tflash_vdd>;
vqmmc-supply = <&tf_io>;
@ -274,7 +340,7 @@
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
max-frequency = <100000000>;
max-frequency = <200000000>;
non-removable;
disable-wp;
cap-mmc-highspeed;
@ -293,7 +359,7 @@
};
&usb0_phy {
status = "okay";
status = "disabled";
phy-supply = <&usb_otg_pwr>;
};
@ -303,7 +369,7 @@
};
&usb0 {
status = "okay";
status = "disabled";
};
&usb1 {

9
arch/arm/dts/meson-gxbb-p200.dts
View File

@ -68,10 +68,6 @@
amlogic,tx-delay-ns = <2>;
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-active-low;
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
@ -80,6 +76,11 @@
eth_phy0: ethernet-phy@3 {
/* Micrel KSZ9031 (0x00221620) */
reg = <3>;
reset-assert-us = <10000>;
reset-deassert-us = <30000>;
reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_15 */
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;

2
arch/arm/dts/meson-gxbb-p201.dts
View File

@ -21,6 +21,6 @@
phy-mode = "rmii";
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-delays-us = <0>, <10000>, <1000000>;
snps,reset-active-low;
};

9
arch/arm/dts/meson-gxbb-p20x.dtsi
View File

@ -46,8 +46,8 @@
gpios-states = <1>;
/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
states = <1800000 0
3300000 1>;
states = <1800000 0>,
<3300000 1>;
regulator-settling-time-up-us = <10000>;
regulator-settling-time-down-us = <150000>;
@ -165,11 +165,14 @@
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
max-frequency = <50000000>;
non-removable;
disable-wp;
/* WiFi firmware requires power to be kept while in suspend */
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vddao_3v3>;

118
arch/arm/dts/meson-gxbb.dtsi
View File

@ -81,6 +81,7 @@
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
function = "uart_ao";
bias-disable;
};
};
@ -89,6 +90,7 @@
groups = "uart_cts_ao_a",
"uart_rts_ao_a";
function = "uart_ao";
bias-disable;
};
};
@ -96,6 +98,7 @@
mux {
groups = "uart_tx_ao_b", "uart_rx_ao_b";
function = "uart_ao_b";
bias-disable;
};
};
@ -104,6 +107,7 @@
groups = "uart_cts_ao_b",
"uart_rts_ao_b";
function = "uart_ao_b";
bias-disable;
};
};
@ -111,6 +115,7 @@
mux {
groups = "remote_input_ao";
function = "remote_input_ao";
bias-disable;
};
};
@ -119,6 +124,7 @@
groups = "i2c_sck_ao",
"i2c_sda_ao";
function = "i2c_ao";
bias-disable;
};
};
@ -126,6 +132,7 @@
mux {
groups = "pwm_ao_a_3";
function = "pwm_ao_a_3";
bias-disable;
};
};
@ -133,6 +140,7 @@
mux {
groups = "pwm_ao_a_6";
function = "pwm_ao_a_6";
bias-disable;
};
};
@ -140,6 +148,7 @@
mux {
groups = "pwm_ao_a_12";
function = "pwm_ao_a_12";
bias-disable;
};
};
@ -147,6 +156,7 @@
mux {
groups = "pwm_ao_b";
function = "pwm_ao_b";
bias-disable;
};
};
@ -154,6 +164,7 @@
mux {
groups = "i2s_am_clk";
function = "i2s_out_ao";
bias-disable;
};
};
@ -161,6 +172,7 @@
mux {
groups = "i2s_out_ao_clk";
function = "i2s_out_ao";
bias-disable;
};
};
@ -168,6 +180,7 @@
mux {
groups = "i2s_out_lr_clk";
function = "i2s_out_ao";
bias-disable;
};
};
@ -175,6 +188,7 @@
mux {
groups = "i2s_out_ch01_ao";
function = "i2s_out_ao";
bias-disable;
};
};
@ -182,6 +196,7 @@
mux {
groups = "i2s_out_ch23_ao";
function = "i2s_out_ao";
bias-disable;
};
};
@ -189,6 +204,7 @@
mux {
groups = "i2s_out_ch45_ao";
function = "i2s_out_ao";
bias-disable;
};
};
@ -203,6 +219,7 @@
mux {
groups = "spdif_out_ao_13";
function = "spdif_out_ao";
bias-disable;
};
};
@ -210,6 +227,7 @@
mux {
groups = "ao_cec";
function = "cec_ao";
bias-disable;
};
};
@ -217,6 +235,7 @@
mux {
groups = "ee_cec";
function = "cec_ao";
bias-disable;
};
};
};
@ -280,6 +299,12 @@
&clkc_AO {
compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
clocks = <&xtal>, <&clkc CLKID_CLK81>;
clock-names = "xtal", "mpeg-clk";
};
&efuse {
clocks = <&clkc CLKID_EFUSE>;
};
&ethmac {
@ -311,6 +336,8 @@
clkc: clock-controller {
compatible = "amlogic,gxbb-clkc";
#clock-cells = <1>;
clocks = <&xtal>;
clock-names = "xtal";
};
};
@ -354,11 +381,17 @@
};
emmc_pins: emmc {
mux {
mux-0 {
groups = "emmc_nand_d07",
"emmc_cmd",
"emmc_clk";
"emmc_cmd";
function = "emmc";
bias-pull-up;
};
mux-1 {
groups = "emmc_clk";
function = "emmc";
bias-disable;
};
};
@ -366,6 +399,7 @@
mux {
groups = "emmc_ds";
function = "emmc";
bias-pull-down;
};
};
@ -373,9 +407,6 @@
mux {
groups = "BOOT_8";
function = "gpio_periphs";
};
cfg-pull-down {
pins = "BOOT_8";
bias-pull-down;
};
};
@ -387,6 +418,7 @@
"nor_c",
"nor_cs";
function = "nor";
bias-disable;
};
};
@ -396,6 +428,7 @@
"spi_mosi",
"spi_sclk";
function = "spi";
bias-disable;
};
};
@ -403,18 +436,25 @@
mux {
groups = "spi_ss0";
function = "spi";
bias-disable;
};
};
sdcard_pins: sdcard {
mux {
mux-0 {
groups = "sdcard_d0",
"sdcard_d1",
"sdcard_d2",
"sdcard_d3",
"sdcard_cmd",
"sdcard_clk";
"sdcard_cmd";
function = "sdcard";
bias-pull-up;
};
mux-1 {
groups = "sdcard_clk";
function = "sdcard";
bias-disable;
};
};
@ -422,22 +462,25 @@
mux {
groups = "CARD_2";
function = "gpio_periphs";
};
cfg-pull-down {
pins = "CARD_2";
bias-pull-down;
};
};
sdio_pins: sdio {
mux {
mux-0 {
groups = "sdio_d0",
"sdio_d1",
"sdio_d2",
"sdio_d3",
"sdio_cmd",
"sdio_clk";
"sdio_cmd";
function = "sdio";
bias-pull-up;
};
mux-1 {
groups = "sdio_clk";
function = "sdio";
bias-disable;
};
};
@ -445,9 +488,6 @@
mux {
groups = "GPIOX_4";
function = "gpio_periphs";
};
cfg-pull-down {
pins = "GPIOX_4";
bias-pull-down;
};
};
@ -456,6 +496,7 @@
mux {
groups = "sdio_irq";
function = "sdio";
bias-disable;
};
};
@ -464,6 +505,7 @@
groups = "uart_tx_a",
"uart_rx_a";
function = "uart_a";
bias-disable;
};
};
@ -472,6 +514,7 @@
groups = "uart_cts_a",
"uart_rts_a";
function = "uart_a";
bias-disable;
};
};
@ -480,6 +523,7 @@
groups = "uart_tx_b",
"uart_rx_b";
function = "uart_b";
bias-disable;
};
};
@ -488,6 +532,7 @@
groups = "uart_cts_b",
"uart_rts_b";
function = "uart_b";
bias-disable;
};
};
@ -496,6 +541,7 @@
groups = "uart_tx_c",
"uart_rx_c";
function = "uart_c";
bias-disable;
};
};
@ -504,6 +550,7 @@
groups = "uart_cts_c",
"uart_rts_c";
function = "uart_c";
bias-disable;
};
};
@ -512,6 +559,7 @@
groups = "i2c_sck_a",
"i2c_sda_a";
function = "i2c_a";
bias-disable;
};
};
@ -520,6 +568,7 @@
groups = "i2c_sck_b",
"i2c_sda_b";
function = "i2c_b";
bias-disable;
};
};
@ -528,6 +577,7 @@
groups = "i2c_sck_c",
"i2c_sda_c";
function = "i2c_c";
bias-disable;
};
};
@ -548,6 +598,7 @@
"eth_txd2",
"eth_txd3";
function = "eth";
bias-disable;
};
};
@ -563,6 +614,7 @@
"eth_txd0",
"eth_txd1";
function = "eth";
bias-disable;
};
};
@ -570,6 +622,7 @@
mux {
groups = "pwm_a_x";
function = "pwm_a_x";
bias-disable;
};
};
@ -577,6 +630,7 @@
mux {
groups = "pwm_a_y";
function = "pwm_a_y";
bias-disable;
};
};
@ -584,6 +638,7 @@
mux {
groups = "pwm_b";
function = "pwm_b";
bias-disable;
};
};
@ -591,6 +646,7 @@
mux {
groups = "pwm_d";
function = "pwm_d";
bias-disable;
};
};
@ -598,6 +654,7 @@
mux {
groups = "pwm_e";
function = "pwm_e";
bias-disable;
};
};
@ -605,6 +662,7 @@
mux {
groups = "pwm_f_x";
function = "pwm_f_x";
bias-disable;
};
};
@ -612,6 +670,7 @@
mux {
groups = "pwm_f_y";
function = "pwm_f_y";
bias-disable;
};
};
@ -619,6 +678,7 @@
mux {
groups = "hdmi_hpd";
function = "hdmi_hpd";
bias-disable;
};
};
@ -626,6 +686,7 @@
mux {
groups = "hdmi_sda", "hdmi_scl";
function = "hdmi_i2c";
bias-disable;
};
};
@ -633,6 +694,7 @@
mux {
groups = "i2sout_ch23_y";
function = "i2s_out";
bias-disable;
};
};
@ -640,6 +702,7 @@
mux {
groups = "i2sout_ch45_y";
function = "i2s_out";
bias-disable;
};
};
@ -647,6 +710,7 @@
mux {
groups = "i2sout_ch67_y";
function = "i2s_out";
bias-disable;
};
};
@ -654,6 +718,7 @@
mux {
groups = "spdif_out_y";
function = "spdif_out";
bias-disable;
};
};
};
@ -734,6 +799,12 @@
resets = <&reset RESET_SD_EMMC_C>;
};
&simplefb_hdmi {
clocks = <&clkc CLKID_HDMI_PCLK>,
<&clkc CLKID_CLK81>,
<&clkc CLKID_GCLK_VENCI_INT0>;
};
&spicc {
clocks = <&clkc CLKID_SPICC>;
clock-names = "core";
@ -774,3 +845,14 @@
compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
power-domains = <&pwrc_vpu>;
};
&vdec {
compatible = "amlogic,gxbb-vdec", "amlogic,gx-vdec";
clocks = <&clkc CLKID_DOS_PARSER>,
<&clkc CLKID_DOS>,
<&clkc CLKID_VDEC_1>,
<&clkc CLKID_VDEC_HEVC>;
clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
resets = <&reset RESET_PARSER>;
reset-names = "esparser";
};

2
arch/arm/dts/meson-gxl-s805x-libretech-ac.dts
View File

@ -14,7 +14,7 @@
/ {
compatible = "libretech,aml-s805x-ac", "amlogic,s805x",
"amlogic,meson-gxl";
model = "Libre Computer Board AML-S805X-AC";
model = "Libre Computer AML-S805X-AC";
aliases {
serial0 = &uart_AO;

20
arch/arm/dts/meson-gxl-s905x-khadas-vim.dts
View File

@ -33,11 +33,9 @@
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
button@0 {
power-button {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
@ -110,10 +108,10 @@
};
&ir {
linux,rc-map-name = "rc-geekbox";
linux,rc-map-name = "rc-khadas";
};
&pinctrl_aobus {
&gpio_ao {
gpio-line-names = "UART TX",
"UART RX",
"Power Key In",
@ -128,7 +126,7 @@
"";
};
&pinctrl_periphs {
&gpio {
gpio-line-names = /* Bank GPIOZ */
"", "", "", "", "", "", "",
"", "", "", "", "", "", "",
@ -188,6 +186,16 @@
};
};
&uart_A {
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
max-speed = <2000000>;
clocks = <&wifi32k>;
clock-names = "lpo";
};
};
/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
&uart_AO {
status = "okay";

26
arch/arm/dts/meson-gxl-s905x-libretech-cc.dts
View File

@ -12,8 +12,9 @@
#include "meson-gxl-s905x.dtsi"
/ {
compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl";
model = "Libre Computer Board AML-S905X-CC";
compatible = "libretech,aml-s905x-cc", "amlogic,s905x",
"amlogic,meson-gxl";
model = "Libre Computer AML-S905X-CC";
aliases {
serial0 = &uart_AO;
@ -115,11 +116,13 @@
regulator-max-microvolt = <1800000>;
};
/* This is provided by LDOs on the eMMC daugther card */
vddio_boot: regulator-vddio_boot {
compatible = "regulator-fixed";
regulator-name = "VDDIO_BOOT";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc_3v3>;
};
};
@ -164,7 +167,7 @@
};
};
&pinctrl_aobus {
&gpio_ao {
gpio-line-names = "UART TX",
"UART RX",
"Blue LED",
@ -179,7 +182,7 @@
"7J1 Header Pin15";
};
&pinctrl_periphs {
&gpio {
gpio-line-names = /* Bank GPIOZ */
"", "", "", "", "", "", "",
"", "", "", "", "", "", "",
@ -235,11 +238,10 @@
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
max-frequency = <50000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
cd-inverted;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vcc_card>;
@ -254,9 +256,9 @@
bus-width = <8>;
cap-mmc-highspeed;
mmc-ddr-3_3v;
max-frequency = <50000000>;
non-removable;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
max-frequency = <200000000>;
disable-wp;
mmc-pwrseq = <&emmc_pwrseq>;

10
arch/arm/dts/meson-gxl-s905x-p212.dtsi
View File

@ -114,11 +114,14 @@
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
max-frequency = <50000000>;
non-removable;
disable-wp;
/* WiFi firmware requires power to be kept while in suspend */
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vddao_3v3>;
@ -134,11 +137,10 @@
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
max-frequency = <50000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
cd-inverted;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;

76
arch/arm/dts/meson-gxl.dtsi
View File

@ -36,6 +36,16 @@
phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>;
};
};
crypto: crypto@c883e000 {
compatible = "amlogic,gxl-crypto";
reg = <0x0 0xc883e000 0x0 0x36>;
interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_BLKMV>;
clock-names = "blkmv";
status = "okay";
};
};
};
@ -80,9 +90,6 @@
};
&ethmac {
reg = <0x0 0xc9410000 0x0 0x10000
0x0 0xc8834540 0x0 0x4>;
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
<&clkc CLKID_MPLL2>;
@ -326,10 +333,15 @@
};
emmc_pins: emmc {
mux {
mux-0 {
groups = "emmc_nand_d07",
"emmc_cmd",
"emmc_clk";
"emmc_cmd";
function = "emmc";
bias-pull-up;
};
mux-1 {
groups = "emmc_clk";
function = "emmc";
bias-disable;
};
@ -339,7 +351,7 @@
mux {
groups = "emmc_ds";
function = "emmc";
bias-disable;
bias-pull-down;
};
};
@ -381,13 +393,18 @@
};
sdcard_pins: sdcard {
mux {
mux-0 {
groups = "sdcard_d0",
"sdcard_d1",
"sdcard_d2",
"sdcard_d3",
"sdcard_cmd",
"sdcard_clk";
"sdcard_cmd";
function = "sdcard";
bias-pull-up;
};
mux-1 {
groups = "sdcard_clk";
function = "sdcard";
bias-disable;
};
@ -402,13 +419,18 @@
};
sdio_pins: sdio {
mux {
mux-0 {
groups = "sdio_d0",
"sdio_d1",
"sdio_d2",
"sdio_d3",
"sdio_cmd",
"sdio_clk";
"sdio_cmd";
function = "sdio";
bias-pull-up;
};
mux-1 {
groups = "sdio_clk";
function = "sdio";
bias-disable;
};
@ -511,6 +533,15 @@
};
};
i2c_c_dv18_pins: i2c_c_dv18 {
mux {
groups = "i2c_sck_c_dv19",
"i2c_sda_c_dv18";
function = "i2c_c";
bias-disable;
};
};
eth_pins: eth_c {
mux {
groups = "eth_mdio",
@ -697,7 +728,7 @@
#size-cells = <0>;
internal_phy: ethernet-phy@8 {
compatible = "ethernet-phy-id0181.4400", "ethernet-phy-ieee802.3-c22";
compatible = "ethernet-phy-id0181.4400";
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <8>;
max-speed = <100>;
@ -787,6 +818,12 @@
resets = <&reset RESET_SD_EMMC_C>;
};
&simplefb_hdmi {
clocks = <&clkc CLKID_HDMI_PCLK>,
<&clkc CLKID_CLK81>,
<&clkc CLKID_GCLK_VENCI_INT0>;
};
&spicc {
clocks = <&clkc CLKID_SPICC>;
clock-names = "core";
@ -827,3 +864,14 @@
compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
power-domains = <&pwrc_vpu>;
};
&vdec {
compatible = "amlogic,gxl-vdec", "amlogic,gx-vdec";
clocks = <&clkc CLKID_DOS_PARSER>,
<&clkc CLKID_DOS>,
<&clkc CLKID_VDEC_1>,
<&clkc CLKID_VDEC_HEVC>;
clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
resets = <&reset RESET_PARSER>;
reset-names = "esparser";
};

71
arch/arm/dts/meson-gxm-khadas-vim2.dts
View File

@ -18,7 +18,6 @@
aliases {
serial0 = &uart_AO;
serial1 = &uart_A;
serial2 = &uart_AO_B;
};
@ -63,11 +62,9 @@
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
button@0 {
power-button {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
@ -132,19 +129,15 @@
map1 {
trip = <&cpu_alert1>;
cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>;
};
map2 {
trip = <&cpu_alert1>;
cooling-device =
<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map3 {
trip = <&cpu_alert1>;
cooling-device =
<&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
@ -246,11 +239,6 @@
amlogic,tx-delay-ns = <2>;
/* External PHY reset is shared with internal PHY Led signals */
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-active-low;
/* External PHY is in RGMII */
phy-mode = "rgmii";
@ -261,6 +249,11 @@
external_phy: ethernet-phy@0 {
/* Realtek RTL8211F (0x001cc916) */
reg = <0>;
reset-assert-us = <10000>;
reset-deassert-us = <30000>;
reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_15 */
interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
@ -306,7 +299,7 @@
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
linux,rc-map-name = "rc-geekbox";
linux,rc-map-name = "rc-khadas";
};
&pwm_AO_ab {
@ -328,16 +321,20 @@
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
bus-width = <4>;
max-frequency = <100000000>;
max-frequency = <50000000>;
non-removable;
disable-wp;
/* WiFi firmware requires power to be kept while in suspend */
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vddao_3v3>;
@ -353,15 +350,15 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
max-frequency = <50000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
cd-inverted;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
@ -371,17 +368,16 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;
disable-wp;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
@ -409,8 +405,17 @@
/* This one is connected to the Bluetooth module */
&uart_A {
status = "okay";
pinctrl-0 = <&uart_a_pins>;
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
pinctrl-names = "default";
uart-has-rtscts;
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
max-speed = <2000000>;
clocks = <&wifi32k>;
clock-names = "lpo";
};
};
/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */

39
arch/arm/dts/meson-gxm.dtsi
View File

@ -44,7 +44,7 @@
cpu4: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
compatible = "arm,cortex-a53";
reg = <0x0 0x100>;
enable-method = "psci";
next-level-cache = <&l2>;
@ -53,7 +53,7 @@
cpu5: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
compatible = "arm,cortex-a53";
reg = <0x0 0x101>;
enable-method = "psci";
next-level-cache = <&l2>;
@ -62,7 +62,7 @@
cpu6: cpu@102 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
compatible = "arm,cortex-a53";
reg = <0x0 0x102>;
enable-method = "psci";
next-level-cache = <&l2>;
@ -71,7 +71,7 @@
cpu7: cpu@103 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
compatible = "arm,cortex-a53";
reg = <0x0 0x103>;
enable-method = "psci";
next-level-cache = <&l2>;
@ -91,6 +91,33 @@
reset-names = "phy";
status = "okay";
};
mali: gpu@c0000 {
compatible = "amlogic,meson-gxm-mali", "arm,mali-t820";
reg = <0x0 0xc0000 0x0 0x40000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "job", "mmu", "gpu";
clocks = <&clkc CLKID_MALI>;
resets = <&reset RESET_MALI_CAPB3>, <&reset RESET_MALI>;
/*
* Mali clocking is provided by two identical clock paths
* MALI_0 and MALI_1 muxed to a single clock by a glitch
* free mux to safely change frequency while running.
*/
assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
<&clkc CLKID_MALI_0>,
<&clkc CLKID_MALI>; /* Glitch free mux */
assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
<0>, /* Do Nothing */
<&clkc CLKID_MALI_0>;
assigned-clock-rates = <0>, /* Do Nothing */
<666666666>,
<0>; /* Do Nothing */
};
};
&clkc_AO {
@ -117,3 +144,7 @@
&dwc3 {
phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>, <&usb2_phy2>;
};
&vdec {
compatible = "amlogic,gxm-vdec", "amlogic,gx-vdec";
};

7
arch/arm/dts/meson-khadas-vim3.dtsi
View File

@ -246,6 +246,10 @@
linux,rc-map-name = "rc-khadas";
};
&pcie {
reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>;
};
&pwm_ef {
status = "okay";
pinctrl-0 = <&pwm_e_pins>;
@ -274,6 +278,9 @@
non-removable;
disable-wp;
/* WiFi firmware requires power to be kept while in suspend */
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vsys_3v3>;

236
arch/arm/dts/meson-sm1-sei610.dts
View File

@ -9,6 +9,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/meson-g12a-gpio.h>
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
/ {
compatible = "seirobotics,sei610", "amlogic,sm1";
@ -19,6 +20,22 @@
ethernet0 = &ethmac;
};
mono_dac: audio-codec-0 {
compatible = "maxim,max98357a";
#sound-dai-cells = <0>;
sound-name-prefix = "U16";
sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>;
};
dmics: audio-codec-1 {
#sound-dai-cells = <0>;
compatible = "dmic-codec";
num-channels = <2>;
wakeup-delay-ms = <50>;
status = "okay";
sound-name-prefix = "MIC";
};
chosen {
stdout-path = "serial0:115200n8";
};
@ -29,25 +46,47 @@
};
gpio-keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
compatible = "gpio-keys";
key1 {
label = "A";
linux,code = <BTN_0>;
gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
interrupts = <34 IRQ_TYPE_EDGE_BOTH>;
};
key2 {
label = "B";
linux,code = <BTN_1>;
gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
interrupts = <35 IRQ_TYPE_EDGE_BOTH>;
};
key3 {
label = "C";
linux,code = <BTN_2>;
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
};
mic_mute {
label = "MicMute";
linux,code = <SW_MUTE_DEVICE>;
linux,input-type = <EV_SW>;
gpios = <&gpio_ao GPIOE_2 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
interrupts = <99 IRQ_TYPE_EDGE_BOTH>;
};
power_key {
label = "PowerKey";
linux,code = <KEY_POWER>;
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
};
};
@ -179,6 +218,120 @@
clock-names = "ext_clock";
};
sound {
compatible = "amlogic,axg-sound-card";
model = "SM1-SEI610";
audio-aux-devs = <&tdmout_a>, <&tdmout_b>,
<&tdmin_a>, <&tdmin_b>;
audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
"TDMOUT_A IN 1", "FRDDR_B OUT 0",
"TDMOUT_A IN 2", "FRDDR_C OUT 0",
"TDM_A Playback", "TDMOUT_A OUT",
"TDMOUT_B IN 0", "FRDDR_A OUT 1",
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
"TDM_B Playback", "TDMOUT_B OUT",
"TODDR_A IN 4", "PDM Capture",
"TODDR_B IN 4", "PDM Capture",
"TODDR_C IN 4", "PDM Capture",
"TDMIN_A IN 0", "TDM_A Capture",
"TDMIN_A IN 3", "TDM_A Loopback",
"TDMIN_B IN 0", "TDM_A Capture",
"TDMIN_B IN 3", "TDM_A Loopback",
"TDMIN_A IN 1", "TDM_B Capture",
"TDMIN_A IN 4", "TDM_B Loopback",
"TDMIN_B IN 1", "TDM_B Capture",
"TDMIN_B IN 4", "TDM_B Loopback",
"TODDR_A IN 0", "TDMIN_A OUT",
"TODDR_B IN 0", "TDMIN_A OUT",
"TODDR_C IN 0", "TDMIN_A OUT",
"TODDR_A IN 1", "TDMIN_B OUT",
"TODDR_B IN 1", "TDMIN_B OUT",
"TODDR_C IN 1", "TDMIN_B OUT";
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
assigned-clock-parents = <0>, <0>, <0>;
assigned-clock-rates = <294912000>,
<270950400>,
<393216000>;
status = "okay";
dai-link-0 {
sound-dai = <&frddr_a>;
};
dai-link-1 {
sound-dai = <&frddr_b>;
};
dai-link-2 {
sound-dai = <&frddr_c>;
};
dai-link-3 {
sound-dai = <&toddr_a>;
};
dai-link-4 {
sound-dai = <&toddr_b>;
};
dai-link-5 {
sound-dai = <&toddr_c>;
};
/* internal speaker interface */
dai-link-6 {
sound-dai = <&tdmif_a>;
dai-format = "i2s";
dai-tdm-slot-tx-mask-0 = <1 1>;
mclk-fs = <256>;
codec-0 {
sound-dai = <&mono_dac>;
};
codec-1 {
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
};
};
/* 8ch hdmi interface */
dai-link-7 {
sound-dai = <&tdmif_b>;
dai-format = "i2s";
dai-tdm-slot-tx-mask-0 = <1 1>;
dai-tdm-slot-tx-mask-1 = <1 1>;
dai-tdm-slot-tx-mask-2 = <1 1>;
dai-tdm-slot-tx-mask-3 = <1 1>;
mclk-fs = <256>;
codec {
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
};
};
/* internal digital mics */
dai-link-8 {
sound-dai = <&pdm>;
codec {
sound-dai = <&dmics>;
};
};
/* hdmi glue */
dai-link-9 {
sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
codec {
sound-dai = <&hdmi_tx>;
};
};
};
wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
@ -187,6 +340,10 @@
};
};
&arb {
status = "okay";
};
&cec_AO {
pinctrl-0 = <&cec_ao_a_h_pins>;
pinctrl-names = "default";
@ -201,6 +358,10 @@
hdmi-phandle = <&hdmi_tx>;
};
&clkc_audio {
status = "okay";
};
&cpu0 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
@ -235,6 +396,18 @@
phy-mode = "rmii";
};
&frddr_a {
status = "okay";
};
&frddr_b {
status = "okay";
};
&frddr_c {
status = "okay";
};
&hdmi_tx {
status = "okay";
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
@ -259,6 +432,12 @@
pinctrl-names = "default";
};
&pdm {
pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_dclk_z_pins>;
pinctrl-names = "default";
status = "okay";
};
&pwm_AO_ab {
status = "okay";
pinctrl-0 = <&pwm_ao_a_pins>;
@ -305,6 +484,9 @@
non-removable;
disable-wp;
/* WiFi firmware requires power to be kept while in suspend */
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vddao_3v3>;
@ -353,6 +535,54 @@
vqmmc-supply = <&emmc_1v8>;
};
&tdmif_a {
pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>;
pinctrl-names = "default";
status = "okay";
assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>,
<&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>;
assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
<&clkc_audio AUD_CLKID_MST_A_LRCLK>;
assigned-clock-rates = <0>, <0>;
};
&tdmif_b {
status = "okay";
};
&tdmin_a {
status = "okay";
};
&tdmin_b {
status = "okay";
};
&tdmout_a {
status = "okay";
};
&tdmout_b {
status = "okay";
};
&toddr_a {
status = "okay";
};
&toddr_b {
status = "okay";
};
&toddr_c {
status = "okay";
};
&tohdmitx {
status = "okay";
};
&uart_A {
status = "okay";
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
@ -361,6 +591,8 @@
bluetooth {
compatible = "brcm,bcm43438-bt";
interrupt-parent = <&gpio_intc>;
interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
max-speed = <2000000>;
clocks = <&wifi32k>;

356
arch/arm/dts/meson-sm1.dtsi
View File

@ -5,11 +5,47 @@
*/
#include "meson-g12-common.dtsi"
#include <dt-bindings/clock/axg-audio-clkc.h>
#include <dt-bindings/power/meson-sm1-power.h>
#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
/ {
compatible = "amlogic,sm1";
tdmif_a: audio-controller-0 {
compatible = "amlogic,axg-tdm-iface";
#sound-dai-cells = <0>;
sound-name-prefix = "TDM_A";
clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
<&clkc_audio AUD_CLKID_MST_A_SCLK>,
<&clkc_audio AUD_CLKID_MST_A_LRCLK>;
clock-names = "mclk", "sclk", "lrclk";
status = "disabled";
};
tdmif_b: audio-controller-1 {
compatible = "amlogic,axg-tdm-iface";
#sound-dai-cells = <0>;
sound-name-prefix = "TDM_B";
clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
<&clkc_audio AUD_CLKID_MST_B_SCLK>,
<&clkc_audio AUD_CLKID_MST_B_LRCLK>;
clock-names = "mclk", "sclk", "lrclk";
status = "disabled";
};
tdmif_c: audio-controller-2 {
compatible = "amlogic,axg-tdm-iface";
#sound-dai-cells = <0>;
sound-name-prefix = "TDM_C";
clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
<&clkc_audio AUD_CLKID_MST_C_SCLK>,
<&clkc_audio AUD_CLKID_MST_C_LRCLK>;
clock-names = "mclk", "sclk", "lrclk";
status = "disabled";
};
cpus {
#address-cells = <0x2>;
#size-cells = <0x0>;
@ -117,6 +153,305 @@
};
};
&apb {
audio: bus@60000 {
compatible = "simple-bus";
reg = <0x0 0x60000 0x0 0x1000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0x60000 0x0 0x1000>;
clkc_audio: clock-controller@0 {
status = "disabled";
compatible = "amlogic,sm1-audio-clkc";
reg = <0x0 0x0 0x0 0xb4>;
#clock-cells = <1>;
#reset-cells = <1>;
clocks = <&clkc CLKID_AUDIO>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL3>,
<&clkc CLKID_HIFI_PLL>,
<&clkc CLKID_FCLK_DIV3>,
<&clkc CLKID_FCLK_DIV4>,
<&clkc CLKID_FCLK_DIV5>;
clock-names = "pclk",
"mst_in0",
"mst_in1",
"mst_in2",
"mst_in3",
"mst_in4",
"mst_in5",
"mst_in6",
"mst_in7";
resets = <&reset RESET_AUDIO>;
};
toddr_a: audio-controller@100 {
compatible = "amlogic,sm1-toddr",
"amlogic,axg-toddr";
reg = <0x0 0x100 0x0 0x2c>;
#sound-dai-cells = <0>;
sound-name-prefix = "TODDR_A";
interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
resets = <&arb AXG_ARB_TODDR_A>,
<&clkc_audio AUD_RESET_TODDR_A>;
reset-names = "arb", "rst";
amlogic,fifo-depth = <8192>;
status = "disabled";
};
toddr_b: audio-controller@140 {
compatible = "amlogic,sm1-toddr",
"amlogic,axg-toddr";
reg = <0x0 0x140 0x0 0x2c>;
#sound-dai-cells = <0>;
sound-name-prefix = "TODDR_B";
interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
resets = <&arb AXG_ARB_TODDR_B>,
<&clkc_audio AUD_RESET_TODDR_B>;
reset-names = "arb", "rst";
amlogic,fifo-depth = <256>;
status = "disabled";
};
toddr_c: audio-controller@180 {
compatible = "amlogic,sm1-toddr",
"amlogic,axg-toddr";
reg = <0x0 0x180 0x0 0x2c>;
#sound-dai-cells = <0>;
sound-name-prefix = "TODDR_C";
interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
resets = <&arb AXG_ARB_TODDR_C>,
<&clkc_audio AUD_RESET_TODDR_C>;
reset-names = "arb", "rst";
amlogic,fifo-depth = <256>;
status = "disabled";
};
frddr_a: audio-controller@1c0 {
compatible = "amlogic,sm1-frddr",
"amlogic,axg-frddr";
reg = <0x0 0x1c0 0x0 0x2c>;
#sound-dai-cells = <0>;
sound-name-prefix = "FRDDR_A";
interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
resets = <&arb AXG_ARB_FRDDR_A>,
<&clkc_audio AUD_RESET_FRDDR_A>;
reset-names = "arb", "rst";
amlogic,fifo-depth = <512>;
status = "disabled";
};
frddr_b: audio-controller@200 {
compatible = "amlogic,sm1-frddr",
"amlogic,axg-frddr";
reg = <0x0 0x200 0x0 0x2c>;
#sound-dai-cells = <0>;
sound-name-prefix = "FRDDR_B";
interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
resets = <&arb AXG_ARB_FRDDR_B>,
<&clkc_audio AUD_RESET_FRDDR_B>;
reset-names = "arb", "rst";
amlogic,fifo-depth = <256>;
status = "disabled";
};
frddr_c: audio-controller@240 {
compatible = "amlogic,sm1-frddr",
"amlogic,axg-frddr";
reg = <0x0 0x240 0x0 0x2c>;
#sound-dai-cells = <0>;
sound-name-prefix = "FRDDR_C";
interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
resets = <&arb AXG_ARB_FRDDR_C>,
<&clkc_audio AUD_RESET_FRDDR_C>;
reset-names = "arb", "rst";
amlogic,fifo-depth = <256>;
status = "disabled";
};
arb: reset-controller@280 {
status = "disabled";
compatible = "amlogic,meson-sm1-audio-arb";
reg = <0x0 0x280 0x0 0x4>;
#reset-cells = <1>;
clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
};
tdmin_a: audio-controller@300 {
compatible = "amlogic,sm1-tdmin",
"amlogic,axg-tdmin";
reg = <0x0 0x300 0x0 0x40>;
sound-name-prefix = "TDMIN_A";
resets = <&clkc_audio AUD_RESET_TDMIN_A>;
clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
<&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
<&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
<&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
tdmin_b: audio-controller@340 {
compatible = "amlogic,sm1-tdmin",
"amlogic,axg-tdmin";
reg = <0x0 0x340 0x0 0x40>;
sound-name-prefix = "TDMIN_B";
resets = <&clkc_audio AUD_RESET_TDMIN_B>;
clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
<&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
<&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
<&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
tdmin_c: audio-controller@380 {
compatible = "amlogic,sm1-tdmin",
"amlogic,axg-tdmin";
reg = <0x0 0x380 0x0 0x40>;
sound-name-prefix = "TDMIN_C";
resets = <&clkc_audio AUD_RESET_TDMIN_C>;
clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
<&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
<&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
<&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
tdmin_lb: audio-controller@3c0 {
compatible = "amlogic,sm1-tdmin",
"amlogic,axg-tdmin";
reg = <0x0 0x3c0 0x0 0x40>;
sound-name-prefix = "TDMIN_LB";
resets = <&clkc_audio AUD_RESET_TDMIN_LB>;
clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
<&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
<&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
<&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
tdmout_a: audio-controller@500 {
compatible = "amlogic,sm1-tdmout";
reg = <0x0 0x500 0x0 0x40>;
sound-name-prefix = "TDMOUT_A";
resets = <&clkc_audio AUD_RESET_TDMOUT_A>;
clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
<&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
tdmout_b: audio-controller@540 {
compatible = "amlogic,sm1-tdmout";
reg = <0x0 0x540 0x0 0x40>;
sound-name-prefix = "TDMOUT_B";
resets = <&clkc_audio AUD_RESET_TDMOUT_B>;
clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
<&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
tdmout_c: audio-controller@580 {
compatible = "amlogic,sm1-tdmout";
reg = <0x0 0x580 0x0 0x40>;
sound-name-prefix = "TDMOUT_C";
resets = <&clkc_audio AUD_RESET_TDMOUT_C>;
clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
<&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
tohdmitx: audio-controller@744 {
compatible = "amlogic,sm1-tohdmitx",
"amlogic,g12a-tohdmitx";
reg = <0x0 0x744 0x0 0x4>;
#sound-dai-cells = <1>;
sound-name-prefix = "TOHDMITX";
resets = <&clkc_audio AUD_RESET_TOHDMITX>;
status = "disabled";
};
toddr_d: audio-controller@840 {
compatible = "amlogic,sm1-toddr",
"amlogic,axg-toddr";
reg = <0x0 0x840 0x0 0x2c>;
#sound-dai-cells = <0>;
sound-name-prefix = "TODDR_D";
interrupts = <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_TODDR_D>;
resets = <&arb AXG_ARB_TODDR_D>,
<&clkc_audio AUD_RESET_TODDR_D>;
reset-names = "arb", "rst";
amlogic,fifo-depth = <256>;
status = "disabled";
};
frddr_d: audio-controller@880 {
compatible = "amlogic,sm1-frddr",
"amlogic,axg-frddr";
reg = <0x0 0x880 0x0 0x2c>;
#sound-dai-cells = <0>;
sound-name-prefix = "FRDDR_D";
interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_FRDDR_D>;
resets = <&arb AXG_ARB_FRDDR_D>,
<&clkc_audio AUD_RESET_FRDDR_D>;
reset-names = "arb", "rst";
amlogic,fifo-depth = <256>;
status = "disabled";
};
};
pdm: audio-controller@61000 {
compatible = "amlogic,sm1-pdm",
"amlogic,axg-pdm";
reg = <0x0 0x61000 0x0 0x34>;
#sound-dai-cells = <0>;
sound-name-prefix = "PDM";
clocks = <&clkc_audio AUD_CLKID_PDM>,
<&clkc_audio AUD_CLKID_PDM_DCLK>,
<&clkc_audio AUD_CLKID_PDM_SYSCLK>;
clock-names = "pclk", "dclk", "sysclk";
status = "disabled";
};
};
&cecb_AO {
compatible = "amlogic,meson-sm1-ao-cec";
};
@ -134,10 +469,31 @@
power-domains = <&pwrc PWRC_SM1_ETH_ID>;
};
&gpio_intc {
compatible = "amlogic,meson-sm1-gpio-intc",
"amlogic,meson-gpio-intc";
};
&pcie {
power-domains = <&pwrc PWRC_SM1_PCIE_ID>;
};
&pwrc {
compatible = "amlogic,meson-sm1-pwrc";
};
&simplefb_cvbs {
power-domains = <&pwrc PWRC_SM1_VPU_ID>;
};
&simplefb_hdmi {
power-domains = <&pwrc PWRC_SM1_VPU_ID>;
};
&vdec {
compatible = "amlogic,sm1-vdec";
};
&vpu {
power-domains = <&pwrc PWRC_SM1_VPU_ID>;
};

10
include/dt-bindings/clock/axg-audio-clkc.h
View File

@ -80,5 +80,15 @@
#define AUD_CLKID_TDM_SCLK_PAD0 160
#define AUD_CLKID_TDM_SCLK_PAD1 161
#define AUD_CLKID_TDM_SCLK_PAD2 162
#define AUD_CLKID_TOP 163
#define AUD_CLKID_TORAM 164
#define AUD_CLKID_EQDRC 165
#define AUD_CLKID_RESAMPLE_B 166
#define AUD_CLKID_TOVAD 167
#define AUD_CLKID_LOCKER 168
#define AUD_CLKID_SPDIFIN_LB 169
#define AUD_CLKID_FRDDR_D 170
#define AUD_CLKID_TODDR_D 171
#define AUD_CLKID_LOOPBACK_B 172
#endif /* __AXG_AUDIO_CLKC_BINDINGS_H */

7
include/dt-bindings/clock/gxbb-aoclkc.h
View File

@ -63,5 +63,12 @@
#define CLKID_AO_UART2 4
#define CLKID_AO_IR_BLASTER 5
#define CLKID_AO_CEC_32K 6
#define CLKID_AO_CTS_OSCIN 7
#define CLKID_AO_32K_PRE 8
#define CLKID_AO_32K_DIV 9
#define CLKID_AO_32K_SEL 10
#define CLKID_AO_32K 11
#define CLKID_AO_CTS_RTC_OSCIN 12
#define CLKID_AO_CLK81 13
#endif

21
include/dt-bindings/clock/gxbb-clkc.h
View File

@ -125,5 +125,26 @@
#define CLKID_VAPB_1 138
#define CLKID_VAPB_SEL 139
#define CLKID_VAPB 140
#define CLKID_VDEC_1 153
#define CLKID_VDEC_HEVC 156
#define CLKID_GEN_CLK 159
#define CLKID_VID_PLL 166
#define CLKID_VCLK 175
#define CLKID_VCLK2 176
#define CLKID_VCLK_DIV1 185
#define CLKID_VCLK_DIV2 186
#define CLKID_VCLK_DIV4 187
#define CLKID_VCLK_DIV6 188
#define CLKID_VCLK_DIV12 189
#define CLKID_VCLK2_DIV1 190
#define CLKID_VCLK2_DIV2 191
#define CLKID_VCLK2_DIV4 192
#define CLKID_VCLK2_DIV6 193
#define CLKID_VCLK2_DIV12 194
#define CLKID_CTS_ENCI 199
#define CLKID_CTS_ENCP 200
#define CLKID_CTS_VDAC 201
#define CLKID_HDMI_TX 202
#define CLKID_HDMI 205
#endif /* __GXBB_CLKC_H */

8
include/dt-bindings/gpio/meson-gxbb-gpio.h
View File

@ -1,15 +1,9 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* GPIO definitions for Amlogic Meson GXBB SoCs
*
* Copyright (C) 2016 Endless Mobile, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _DT_BINDINGS_MESON_GXBB_GPIO_H

8
include/dt-bindings/gpio/meson-gxl-gpio.h
View File

@ -1,15 +1,9 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* GPIO definitions for Amlogic Meson GXL SoCs
*
* Copyright (C) 2016 Endless Mobile, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _DT_BINDINGS_MESON_GXL_GPIO_H

2
include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h
View File

@ -13,5 +13,7 @@
#define AXG_ARB_FRDDR_A 3
#define AXG_ARB_FRDDR_B 4
#define AXG_ARB_FRDDR_C 5
#define AXG_ARB_TODDR_D 6
#define AXG_ARB_FRDDR_D 7
#endif /* _DT_BINDINGS_AMLOGIC_MESON_AXG_AUDIO_ARB_H */

3
include/dt-bindings/reset/amlogic,meson-axg-reset.h
View File

@ -1,12 +1,11 @@
/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
/*
*
* Copyright (c) 2016 BayLibre, SAS.
* Author: Neil Armstrong <narmstrong@baylibre.com>
*
* Copyright (c) 2017 Amlogic, inc.
* Author: Yixun Lan <yixun.lan@amlogic.com>
*
* SPDX-License-Identifier: (GPL-2.0+ OR BSD)
*/
#ifndef _DT_BINDINGS_AMLOGIC_MESON_AXG_RESET_H

15
include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h
View File

@ -35,4 +35,19 @@
#define AUD_RESET_TOHDMITX 24
#define AUD_RESET_CLKTREE 25
/* SM1 added resets */
#define AUD_RESET_RESAMPLE_B 26
#define AUD_RESET_TOVAD 27
#define AUD_RESET_LOCKER 28
#define AUD_RESET_SPDIFIN_LB 29
#define AUD_RESET_FRATV 30
#define AUD_RESET_FRHDMIRX 31
#define AUD_RESET_FRDDR_D 32
#define AUD_RESET_TODDR_D 33
#define AUD_RESET_LOOPBACK_B 34
#define AUD_RESET_EARCTX 35
#define AUD_RESET_EARCRX 36
#define AUD_RESET_FRDDR_E 37
#define AUD_RESET_TODDR_E 38
#endif

51
include/dt-bindings/reset/amlogic,meson-gxbb-reset.h
View File

@ -1,56 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
/*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright (c) 2016 BayLibre, SAS.
* Author: Neil Armstrong <narmstrong@baylibre.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
* The full GNU General Public License is included in this distribution
* in the file called COPYING.
*
* BSD LICENSE
*
* Copyright (c) 2016 BayLibre, SAS.
* Author: Neil Armstrong <narmstrong@baylibre.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H
#define _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H