ppc4xx: respect 80-chars per line in ppc*.h files
After running checkstyle.pl on the three previous patches I noted that in the *.h files there were a lot of long lines. This patch solves this problem. Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org> Signed-off-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Niklaus Giger
Stefan Roese
parent
78d2a64137
commit
dbcc357166
508
include/ppc405.h
508
include/ppc405.h
@ -29,9 +29,9 @@
|
||||
#define PPC_128MB_SACR_VALUE(addr) PPC_REG_VAL(PPC_128MB_SACR_BIT(addr),1)
|
||||
|
||||
#ifndef CONFIG_IOP480
|
||||
#define CONFIG_SYS_DCACHE_SIZE (16 << 10) /* For AMCC 405 CPUs */
|
||||
#define CONFIG_SYS_DCACHE_SIZE (16 << 10) /* For AMCC 405 CPUs */
|
||||
#else
|
||||
#define CONFIG_SYS_DCACHE_SIZE (2 << 10) /* For PLX IOP480 (403) */
|
||||
#define CONFIG_SYS_DCACHE_SIZE (2 << 10) /* For PLX IOP480(403)*/
|
||||
#endif
|
||||
|
||||
/******************************************************************************
|
||||
@ -71,10 +71,10 @@
|
||||
* Decompression Controller
|
||||
******************************************************************************/
|
||||
#define DECOMP_DCR_BASE 0x14
|
||||
#define KIAR (DECOMP_DCR_BASE+0x0) /* Decompression controller addr reg */
|
||||
#define KIDR (DECOMP_DCR_BASE+0x1) /* Decompression controller data reg */
|
||||
#define KIAR (DECOMP_DCR_BASE+0x0) /* Decompression controller addr reg */
|
||||
#define KIDR (DECOMP_DCR_BASE+0x1) /* Decompression controller data reg */
|
||||
/* values for kiar register - indirect addressing of these regs */
|
||||
#define KCONF 0x40 /* decompression core config register */
|
||||
#define KCONF 0x40 /* decompression core config register */
|
||||
#endif
|
||||
|
||||
/******************************************************************************
|
||||
@ -85,61 +85,61 @@
|
||||
#else
|
||||
#define POWERMAN_DCR_BASE 0xb8
|
||||
#endif
|
||||
#define CPMSR (POWERMAN_DCR_BASE+0x0) /* Power management status */
|
||||
#define CPMER (POWERMAN_DCR_BASE+0x1) /* Power management enable */
|
||||
#define CPMFR (POWERMAN_DCR_BASE+0x2) /* Power management force */
|
||||
#define CPMSR (POWERMAN_DCR_BASE+0x0) /* Power management status */
|
||||
#define CPMER (POWERMAN_DCR_BASE+0x1) /* Power management enable */
|
||||
#define CPMFR (POWERMAN_DCR_BASE+0x2) /* Power management force */
|
||||
|
||||
/******************************************************************************
|
||||
* Extrnal Bus Controller
|
||||
******************************************************************************/
|
||||
/* values for EBC0_CFGADDR register - indirect addressing of these regs */
|
||||
#define PB0CR 0x00 /* periph bank 0 config reg */
|
||||
#define PB1CR 0x01 /* periph bank 1 config reg */
|
||||
#define PB2CR 0x02 /* periph bank 2 config reg */
|
||||
#define PB3CR 0x03 /* periph bank 3 config reg */
|
||||
#define PB4CR 0x04 /* periph bank 4 config reg */
|
||||
#define PB0CR 0x00 /* periph bank 0 config reg */
|
||||
#define PB1CR 0x01 /* periph bank 1 config reg */
|
||||
#define PB2CR 0x02 /* periph bank 2 config reg */
|
||||
#define PB3CR 0x03 /* periph bank 3 config reg */
|
||||
#define PB4CR 0x04 /* periph bank 4 config reg */
|
||||
#ifndef CONFIG_405EP
|
||||
#define PB5CR 0x05 /* periph bank 5 config reg */
|
||||
#define PB6CR 0x06 /* periph bank 6 config reg */
|
||||
#define PB7CR 0x07 /* periph bank 7 config reg */
|
||||
#define PB5CR 0x05 /* periph bank 5 config reg */
|
||||
#define PB6CR 0x06 /* periph bank 6 config reg */
|
||||
#define PB7CR 0x07 /* periph bank 7 config reg */
|
||||
#endif
|
||||
#define PB0AP 0x10 /* periph bank 0 access parameters */
|
||||
#define PB1AP 0x11 /* periph bank 1 access parameters */
|
||||
#define PB2AP 0x12 /* periph bank 2 access parameters */
|
||||
#define PB3AP 0x13 /* periph bank 3 access parameters */
|
||||
#define PB4AP 0x14 /* periph bank 4 access parameters */
|
||||
#define PB0AP 0x10 /* periph bank 0 access parameters */
|
||||
#define PB1AP 0x11 /* periph bank 1 access parameters */
|
||||
#define PB2AP 0x12 /* periph bank 2 access parameters */
|
||||
#define PB3AP 0x13 /* periph bank 3 access parameters */
|
||||
#define PB4AP 0x14 /* periph bank 4 access parameters */
|
||||
#ifndef CONFIG_405EP
|
||||
#define PB5AP 0x15 /* periph bank 5 access parameters */
|
||||
#define PB6AP 0x16 /* periph bank 6 access parameters */
|
||||
#define PB7AP 0x17 /* periph bank 7 access parameters */
|
||||
#define PB5AP 0x15 /* periph bank 5 access parameters */
|
||||
#define PB6AP 0x16 /* periph bank 6 access parameters */
|
||||
#define PB7AP 0x17 /* periph bank 7 access parameters */
|
||||
#endif
|
||||
#define PBEAR 0x20 /* periph bus error addr reg */
|
||||
#define PBESR0 0x21 /* periph bus error status reg 0 */
|
||||
#define PBESR1 0x22 /* periph bus error status reg 1 */
|
||||
#define EBC0_CFG 0x23 /* external bus configuration reg */
|
||||
#define PBEAR 0x20 /* periph bus error addr reg */
|
||||
#define PBESR0 0x21 /* periph bus error status reg 0 */
|
||||
#define PBESR1 0x22 /* periph bus error status reg 1 */
|
||||
#define EBC0_CFG 0x23 /* external bus configuration reg */
|
||||
|
||||
#ifdef CONFIG_405EP
|
||||
/******************************************************************************
|
||||
* Control
|
||||
******************************************************************************/
|
||||
#define CNTRL_DCR_BASE 0x0f0
|
||||
#define CPC0_PLLMR0 (CNTRL_DCR_BASE+0x0) /* PLL mode register 0 */
|
||||
#define CPC0_BOOT (CNTRL_DCR_BASE+0x1) /* Clock status register */
|
||||
#define CPC0_EPCTL (CNTRL_DCR_BASE+0x3) /* EMAC to PHY control register */
|
||||
#define CPC0_PLLMR1 (CNTRL_DCR_BASE+0x4) /* PLL mode register 1 */
|
||||
#define CPC0_UCR (CNTRL_DCR_BASE+0x5) /* UART control register */
|
||||
#define CPC0_PCI (CNTRL_DCR_BASE+0x9) /* PCI control register */
|
||||
#define CPC0_PLLMR0 (CNTRL_DCR_BASE+0x0) /* PLL mode register 0 */
|
||||
#define CPC0_BOOT (CNTRL_DCR_BASE+0x1) /* Clock status register */
|
||||
#define CPC0_EPCTL (CNTRL_DCR_BASE+0x3) /* EMAC to PHY control register */
|
||||
#define CPC0_PLLMR1 (CNTRL_DCR_BASE+0x4) /* PLL mode register 1 */
|
||||
#define CPC0_UCR (CNTRL_DCR_BASE+0x5) /* UART control register */
|
||||
#define CPC0_PCI (CNTRL_DCR_BASE+0x9) /* PCI control register */
|
||||
|
||||
#define CPC0_PLLMR0 (CNTRL_DCR_BASE+0x0) /* PLL mode 0 register */
|
||||
#define CPC0_BOOT (CNTRL_DCR_BASE+0x1) /* Chip Clock Status register */
|
||||
#define CPC0_CR1 (CNTRL_DCR_BASE+0x2) /* Chip Control 1 register */
|
||||
#define CPC0_EPRCSR (CNTRL_DCR_BASE+0x3) /* EMAC PHY Rcv Clk Src register*/
|
||||
#define CPC0_PLLMR1 (CNTRL_DCR_BASE+0x4) /* PLL mode 1 register */
|
||||
#define CPC0_UCR (CNTRL_DCR_BASE+0x5) /* UART Control register */
|
||||
#define CPC0_SRR (CNTRL_DCR_BASE+0x6) /* Soft Reset register */
|
||||
#define CPC0_JTAGID (CNTRL_DCR_BASE+0x7) /* JTAG ID register */
|
||||
#define CPC0_SPARE (CNTRL_DCR_BASE+0x8) /* Spare DCR */
|
||||
#define CPC0_PCI (CNTRL_DCR_BASE+0x9) /* PCI Control register */
|
||||
#define CPC0_PLLMR0 (CNTRL_DCR_BASE+0x0) /* PLL mode 0 register */
|
||||
#define CPC0_BOOT (CNTRL_DCR_BASE+0x1) /* Chip Clock Status register */
|
||||
#define CPC0_CR1 (CNTRL_DCR_BASE+0x2) /* Chip Control 1 register */
|
||||
#define CPC0_EPRCSR (CNTRL_DCR_BASE+0x3) /* EMAC PHY Rcv Clk Src register */
|
||||
#define CPC0_PLLMR1 (CNTRL_DCR_BASE+0x4) /* PLL mode 1 register */
|
||||
#define CPC0_UCR (CNTRL_DCR_BASE+0x5) /* UART Control register */
|
||||
#define CPC0_SRR (CNTRL_DCR_BASE+0x6) /* Soft Reset register */
|
||||
#define CPC0_JTAGID (CNTRL_DCR_BASE+0x7) /* JTAG ID register */
|
||||
#define CPC0_SPARE (CNTRL_DCR_BASE+0x8) /* Spare DCR */
|
||||
#define CPC0_PCI (CNTRL_DCR_BASE+0x9) /* PCI Control register */
|
||||
|
||||
/* Bit definitions */
|
||||
#define PLLMR0_CPU_DIV_MASK 0x00300000 /* CPU clock divider */
|
||||
@ -160,13 +160,13 @@
|
||||
#define PLLMR0_OPB_PLB_DIV_3 0x00002000
|
||||
#define PLLMR0_OPB_PLB_DIV_4 0x00003000
|
||||
|
||||
#define PLLMR0_EXB_TO_PLB_MASK 0x00000300 /* External Bus:PLB Divisor */
|
||||
#define PLLMR0_EXB_TO_PLB_MASK 0x00000300 /* External Bus:PLB Divisor */
|
||||
#define PLLMR0_EXB_PLB_DIV_2 0x00000000
|
||||
#define PLLMR0_EXB_PLB_DIV_3 0x00000100
|
||||
#define PLLMR0_EXB_PLB_DIV_4 0x00000200
|
||||
#define PLLMR0_EXB_PLB_DIV_5 0x00000300
|
||||
|
||||
#define PLLMR0_MAL_TO_PLB_MASK 0x00000030 /* MAL:PLB Divisor */
|
||||
#define PLLMR0_MAL_TO_PLB_MASK 0x00000030 /* MAL:PLB Divisor */
|
||||
#define PLLMR0_MAL_PLB_DIV_1 0x00000000
|
||||
#define PLLMR0_MAL_PLB_DIV_2 0x00000010
|
||||
#define PLLMR0_MAL_PLB_DIV_3 0x00000020
|
||||
@ -180,7 +180,7 @@
|
||||
|
||||
#define PLLMR1_SSCS_MASK 0x80000000 /* Select system clock source */
|
||||
#define PLLMR1_PLLR_MASK 0x40000000 /* PLL reset */
|
||||
#define PLLMR1_FBMUL_MASK 0x00F00000 /* PLL feedback multiplier value */
|
||||
#define PLLMR1_FBMUL_MASK 0x00F00000 /* PLL feedback multiplier value */
|
||||
#define PLLMR1_FBMUL_DIV_16 0x00000000
|
||||
#define PLLMR1_FBMUL_DIV_1 0x00100000
|
||||
#define PLLMR1_FBMUL_DIV_2 0x00200000
|
||||
@ -198,7 +198,7 @@
|
||||
#define PLLMR1_FBMUL_DIV_14 0x00E00000
|
||||
#define PLLMR1_FBMUL_DIV_15 0x00F00000
|
||||
|
||||
#define PLLMR1_FWDVA_MASK 0x00070000 /* PLL forward divider A value */
|
||||
#define PLLMR1_FWDVA_MASK 0x00070000 /* PLL forward divider A value */
|
||||
#define PLLMR1_FWDVA_DIV_8 0x00000000
|
||||
#define PLLMR1_FWDVA_DIV_7 0x00010000
|
||||
#define PLLMR1_FWDVA_DIV_6 0x00020000
|
||||
@ -207,132 +207,132 @@
|
||||
#define PLLMR1_FWDVA_DIV_3 0x00050000
|
||||
#define PLLMR1_FWDVA_DIV_2 0x00060000
|
||||
#define PLLMR1_FWDVA_DIV_1 0x00070000
|
||||
#define PLLMR1_FWDVB_MASK 0x00007000 /* PLL forward divider B value */
|
||||
#define PLLMR1_TUNING_MASK 0x000003FF /* PLL tune bits */
|
||||
#define PLLMR1_FWDVB_MASK 0x00007000 /* PLL forward divider B value */
|
||||
#define PLLMR1_TUNING_MASK 0x000003FF /* PLL tune bits */
|
||||
|
||||
/* Defines for CPC0_EPRCSR register */
|
||||
#define CPC0_EPRCSR_E0NFE 0x80000000
|
||||
#define CPC0_EPRCSR_E1NFE 0x40000000
|
||||
#define CPC0_EPRCSR_E1RPP 0x00000080
|
||||
#define CPC0_EPRCSR_E0RPP 0x00000040
|
||||
#define CPC0_EPRCSR_E1ERP 0x00000020
|
||||
#define CPC0_EPRCSR_E0ERP 0x00000010
|
||||
#define CPC0_EPRCSR_E1PCI 0x00000002
|
||||
#define CPC0_EPRCSR_E0PCI 0x00000001
|
||||
#define CPC0_EPRCSR_E0NFE 0x80000000
|
||||
#define CPC0_EPRCSR_E1NFE 0x40000000
|
||||
#define CPC0_EPRCSR_E1RPP 0x00000080
|
||||
#define CPC0_EPRCSR_E0RPP 0x00000040
|
||||
#define CPC0_EPRCSR_E1ERP 0x00000020
|
||||
#define CPC0_EPRCSR_E0ERP 0x00000010
|
||||
#define CPC0_EPRCSR_E1PCI 0x00000002
|
||||
#define CPC0_EPRCSR_E0PCI 0x00000001
|
||||
|
||||
/* Defines for CPC0_PCI Register */
|
||||
#define CPC0_PCI_SPE 0x00000010 /* PCIINT/WE select */
|
||||
#define CPC0_PCI_HOST_CFG_EN 0x00000008 /* PCI host config Enable */
|
||||
#define CPC0_PCI_ARBIT_EN 0x00000001 /* PCI Internal Arb Enabled*/
|
||||
#define CPC0_PCI_SPE 0x00000010 /* PCIINT/WE select */
|
||||
#define CPC0_PCI_HOST_CFG_EN 0x00000008 /* PCI host config Enable */
|
||||
#define CPC0_PCI_ARBIT_EN 0x00000001 /* PCI Internal Arb Enabled */
|
||||
|
||||
/* Defines for CPC0_BOOR Register */
|
||||
#define CPC0_BOOT_SEP 0x00000002 /* serial EEPROM present */
|
||||
#define CPC0_BOOT_SEP 0x00000002 /* serial EEPROM present */
|
||||
|
||||
/* Defines for CPC0_PLLMR1 Register fields */
|
||||
#define PLL_ACTIVE 0x80000000
|
||||
#define CPC0_PLLMR1_SSCS 0x80000000
|
||||
#define PLL_RESET 0x40000000
|
||||
#define CPC0_PLLMR1_PLLR 0x40000000
|
||||
/* Feedback multiplier */
|
||||
#define PLL_FBKDIV 0x00F00000
|
||||
#define CPC0_PLLMR1_FBDV 0x00F00000
|
||||
#define PLL_FBKDIV_16 0x00000000
|
||||
#define PLL_FBKDIV_1 0x00100000
|
||||
#define PLL_FBKDIV_2 0x00200000
|
||||
#define PLL_FBKDIV_3 0x00300000
|
||||
#define PLL_FBKDIV_4 0x00400000
|
||||
#define PLL_FBKDIV_5 0x00500000
|
||||
#define PLL_FBKDIV_6 0x00600000
|
||||
#define PLL_FBKDIV_7 0x00700000
|
||||
#define PLL_FBKDIV_8 0x00800000
|
||||
#define PLL_FBKDIV_9 0x00900000
|
||||
#define PLL_FBKDIV_10 0x00A00000
|
||||
#define PLL_FBKDIV_11 0x00B00000
|
||||
#define PLL_FBKDIV_12 0x00C00000
|
||||
#define PLL_FBKDIV_13 0x00D00000
|
||||
#define PLL_FBKDIV_14 0x00E00000
|
||||
#define PLL_FBKDIV_15 0x00F00000
|
||||
/* Forward A divisor */
|
||||
#define PLL_FWDDIVA 0x00070000
|
||||
#define CPC0_PLLMR1_FWDVA 0x00070000
|
||||
#define PLL_FWDDIVA_8 0x00000000
|
||||
#define PLL_FWDDIVA_7 0x00010000
|
||||
#define PLL_FWDDIVA_6 0x00020000
|
||||
#define PLL_FWDDIVA_5 0x00030000
|
||||
#define PLL_FWDDIVA_4 0x00040000
|
||||
#define PLL_FWDDIVA_3 0x00050000
|
||||
#define PLL_FWDDIVA_2 0x00060000
|
||||
#define PLL_FWDDIVA_1 0x00070000
|
||||
/* Forward B divisor */
|
||||
#define PLL_FWDDIVB 0x00007000
|
||||
#define CPC0_PLLMR1_FWDVB 0x00007000
|
||||
#define PLL_FWDDIVB_8 0x00000000
|
||||
#define PLL_FWDDIVB_7 0x00001000
|
||||
#define PLL_FWDDIVB_6 0x00002000
|
||||
#define PLL_FWDDIVB_5 0x00003000
|
||||
#define PLL_FWDDIVB_4 0x00004000
|
||||
#define PLL_FWDDIVB_3 0x00005000
|
||||
#define PLL_FWDDIVB_2 0x00006000
|
||||
#define PLL_FWDDIVB_1 0x00007000
|
||||
/* PLL tune bits */
|
||||
#define PLL_ACTIVE 0x80000000
|
||||
#define CPC0_PLLMR1_SSCS 0x80000000
|
||||
#define PLL_RESET 0x40000000
|
||||
#define CPC0_PLLMR1_PLLR 0x40000000
|
||||
/* Feedback multiplier */
|
||||
#define PLL_FBKDIV 0x00F00000
|
||||
#define CPC0_PLLMR1_FBDV 0x00F00000
|
||||
#define PLL_FBKDIV_16 0x00000000
|
||||
#define PLL_FBKDIV_1 0x00100000
|
||||
#define PLL_FBKDIV_2 0x00200000
|
||||
#define PLL_FBKDIV_3 0x00300000
|
||||
#define PLL_FBKDIV_4 0x00400000
|
||||
#define PLL_FBKDIV_5 0x00500000
|
||||
#define PLL_FBKDIV_6 0x00600000
|
||||
#define PLL_FBKDIV_7 0x00700000
|
||||
#define PLL_FBKDIV_8 0x00800000
|
||||
#define PLL_FBKDIV_9 0x00900000
|
||||
#define PLL_FBKDIV_10 0x00A00000
|
||||
#define PLL_FBKDIV_11 0x00B00000
|
||||
#define PLL_FBKDIV_12 0x00C00000
|
||||
#define PLL_FBKDIV_13 0x00D00000
|
||||
#define PLL_FBKDIV_14 0x00E00000
|
||||
#define PLL_FBKDIV_15 0x00F00000
|
||||
/* Forward A divisor */
|
||||
#define PLL_FWDDIVA 0x00070000
|
||||
#define CPC0_PLLMR1_FWDVA 0x00070000
|
||||
#define PLL_FWDDIVA_8 0x00000000
|
||||
#define PLL_FWDDIVA_7 0x00010000
|
||||
#define PLL_FWDDIVA_6 0x00020000
|
||||
#define PLL_FWDDIVA_5 0x00030000
|
||||
#define PLL_FWDDIVA_4 0x00040000
|
||||
#define PLL_FWDDIVA_3 0x00050000
|
||||
#define PLL_FWDDIVA_2 0x00060000
|
||||
#define PLL_FWDDIVA_1 0x00070000
|
||||
/* Forward B divisor */
|
||||
#define PLL_FWDDIVB 0x00007000
|
||||
#define CPC0_PLLMR1_FWDVB 0x00007000
|
||||
#define PLL_FWDDIVB_8 0x00000000
|
||||
#define PLL_FWDDIVB_7 0x00001000
|
||||
#define PLL_FWDDIVB_6 0x00002000
|
||||
#define PLL_FWDDIVB_5 0x00003000
|
||||
#define PLL_FWDDIVB_4 0x00004000
|
||||
#define PLL_FWDDIVB_3 0x00005000
|
||||
#define PLL_FWDDIVB_2 0x00006000
|
||||
#define PLL_FWDDIVB_1 0x00007000
|
||||
/* PLL tune bits */
|
||||
#define PLL_TUNE_MASK 0x000003FF
|
||||
#define PLL_TUNE_2_M_3 0x00000133 /* 2 <= M <= 3 */
|
||||
#define PLL_TUNE_4_M_6 0x00000134 /* 3 < M <= 6 */
|
||||
#define PLL_TUNE_7_M_10 0x00000138 /* 6 < M <= 10 */
|
||||
#define PLL_TUNE_11_M_14 0x0000013C /* 10 < M <= 14 */
|
||||
#define PLL_TUNE_15_M_40 0x0000023E /* 14 < M <= 40 */
|
||||
#define PLL_TUNE_VCO_LOW 0x00000000 /* 500MHz <= VCO <= 800MHz */
|
||||
#define PLL_TUNE_VCO_HI 0x00000080 /* 800MHz < VCO <= 1000MHz */
|
||||
#define PLL_TUNE_2_M_3 0x00000133 /* 2 <= M <= 3 */
|
||||
#define PLL_TUNE_4_M_6 0x00000134 /* 3 < M <= 6 */
|
||||
#define PLL_TUNE_7_M_10 0x00000138 /* 6 < M <= 10 */
|
||||
#define PLL_TUNE_11_M_14 0x0000013C /* 10 < M <= 14 */
|
||||
#define PLL_TUNE_15_M_40 0x0000023E /* 14 < M <= 40 */
|
||||
#define PLL_TUNE_VCO_LOW 0x00000000 /* 500MHz <= VCO <= 800MHz */
|
||||
#define PLL_TUNE_VCO_HI 0x00000080 /* 800MHz < VCO <= 1000MHz */
|
||||
|
||||
/* Defines for CPC0_PLLMR0 Register fields */
|
||||
/* CPU divisor */
|
||||
#define PLL_CPUDIV 0x00300000
|
||||
#define CPC0_PLLMR0_CCDV 0x00300000
|
||||
#define PLL_CPUDIV_1 0x00000000
|
||||
#define PLL_CPUDIV_2 0x00100000
|
||||
#define PLL_CPUDIV_3 0x00200000
|
||||
#define PLL_CPUDIV_4 0x00300000
|
||||
/* PLB divisor */
|
||||
#define PLL_PLBDIV 0x00030000
|
||||
#define CPC0_PLLMR0_CBDV 0x00030000
|
||||
#define PLL_PLBDIV_1 0x00000000
|
||||
#define PLL_PLBDIV_2 0x00010000
|
||||
#define PLL_PLBDIV_3 0x00020000
|
||||
#define PLL_PLBDIV_4 0x00030000
|
||||
/* OPB divisor */
|
||||
#define PLL_OPBDIV 0x00003000
|
||||
#define CPC0_PLLMR0_OPDV 0x00003000
|
||||
#define PLL_OPBDIV_1 0x00000000
|
||||
#define PLL_OPBDIV_2 0x00001000
|
||||
#define PLL_OPBDIV_3 0x00002000
|
||||
#define PLL_OPBDIV_4 0x00003000
|
||||
/* EBC divisor */
|
||||
#define PLL_EXTBUSDIV 0x00000300
|
||||
#define CPC0_PLLMR0_EPDV 0x00000300
|
||||
#define PLL_EXTBUSDIV_2 0x00000000
|
||||
#define PLL_EXTBUSDIV_3 0x00000100
|
||||
#define PLL_EXTBUSDIV_4 0x00000200
|
||||
#define PLL_EXTBUSDIV_5 0x00000300
|
||||
/* MAL divisor */
|
||||
#define PLL_MALDIV 0x00000030
|
||||
#define CPC0_PLLMR0_MPDV 0x00000030
|
||||
#define PLL_MALDIV_1 0x00000000
|
||||
#define PLL_MALDIV_2 0x00000010
|
||||
#define PLL_MALDIV_3 0x00000020
|
||||
#define PLL_MALDIV_4 0x00000030
|
||||
/* PCI divisor */
|
||||
#define PLL_PCIDIV 0x00000003
|
||||
#define CPC0_PLLMR0_PPFD 0x00000003
|
||||
#define PLL_PCIDIV_1 0x00000000
|
||||
#define PLL_PCIDIV_2 0x00000001
|
||||
#define PLL_PCIDIV_3 0x00000002
|
||||
#define PLL_PCIDIV_4 0x00000003
|
||||
/* CPU divisor */
|
||||
#define PLL_CPUDIV 0x00300000
|
||||
#define CPC0_PLLMR0_CCDV 0x00300000
|
||||
#define PLL_CPUDIV_1 0x00000000
|
||||
#define PLL_CPUDIV_2 0x00100000
|
||||
#define PLL_CPUDIV_3 0x00200000
|
||||
#define PLL_CPUDIV_4 0x00300000
|
||||
/* PLB divisor */
|
||||
#define PLL_PLBDIV 0x00030000
|
||||
#define CPC0_PLLMR0_CBDV 0x00030000
|
||||
#define PLL_PLBDIV_1 0x00000000
|
||||
#define PLL_PLBDIV_2 0x00010000
|
||||
#define PLL_PLBDIV_3 0x00020000
|
||||
#define PLL_PLBDIV_4 0x00030000
|
||||
/* OPB divisor */
|
||||
#define PLL_OPBDIV 0x00003000
|
||||
#define CPC0_PLLMR0_OPDV 0x00003000
|
||||
#define PLL_OPBDIV_1 0x00000000
|
||||
#define PLL_OPBDIV_2 0x00001000
|
||||
#define PLL_OPBDIV_3 0x00002000
|
||||
#define PLL_OPBDIV_4 0x00003000
|
||||
/* EBC divisor */
|
||||
#define PLL_EXTBUSDIV 0x00000300
|
||||
#define CPC0_PLLMR0_EPDV 0x00000300
|
||||
#define PLL_EXTBUSDIV_2 0x00000000
|
||||
#define PLL_EXTBUSDIV_3 0x00000100
|
||||
#define PLL_EXTBUSDIV_4 0x00000200
|
||||
#define PLL_EXTBUSDIV_5 0x00000300
|
||||
/* MAL divisor */
|
||||
#define PLL_MALDIV 0x00000030
|
||||
#define CPC0_PLLMR0_MPDV 0x00000030
|
||||
#define PLL_MALDIV_1 0x00000000
|
||||
#define PLL_MALDIV_2 0x00000010
|
||||
#define PLL_MALDIV_3 0x00000020
|
||||
#define PLL_MALDIV_4 0x00000030
|
||||
/* PCI divisor */
|
||||
#define PLL_PCIDIV 0x00000003
|
||||
#define CPC0_PLLMR0_PPFD 0x00000003
|
||||
#define PLL_PCIDIV_1 0x00000000
|
||||
#define PLL_PCIDIV_2 0x00000001
|
||||
#define PLL_PCIDIV_3 0x00000002
|
||||
#define PLL_PCIDIV_4 0x00000003
|
||||
|
||||
/*
|
||||
*-------------------------------------------------------------------------------
|
||||
*------------------------------------------------------------------------------
|
||||
* PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI,
|
||||
* assuming a 33.3MHz input clock to the 405EP.
|
||||
*-------------------------------------------------------------------------------
|
||||
*------------------------------------------------------------------------------
|
||||
*/
|
||||
#define PLLMR0_266_133_66 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
|
||||
PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
|
||||
@ -427,25 +427,25 @@
|
||||
#define CPC0_PERD1 0x0e1 /* CPR_PERD1 */
|
||||
#define CPC0_PERC0 0x180 /* CPR_PERC0 */
|
||||
|
||||
#define CPR_CLKUPD_ENPLLCH_EN 0x40000000 /* Enable CPR PLL Changes */
|
||||
#define CPR_CLKUPD_ENDVCH_EN 0x20000000 /* Enable CPR Sys. Div. Changes */
|
||||
#define CPR_PERD0_SPIDV_MASK 0x000F0000 /* SPI Clock Divider */
|
||||
#define CPR_CLKUPD_ENPLLCH_EN 0x40000000 /* Enable CPR PLL Changes */
|
||||
#define CPR_CLKUPD_ENDVCH_EN 0x20000000 /* Enable CPR Sys. Div. Changes */
|
||||
#define CPR_PERD0_SPIDV_MASK 0x000F0000 /* SPI Clock Divider */
|
||||
|
||||
#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
|
||||
#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
|
||||
|
||||
#define PLLD_FBDV_MASK 0x1F000000 /* PLL feedback divider value */
|
||||
#define PLLD_FWDVA_MASK 0x000F0000 /* PLL forward divider A value */
|
||||
#define PLLD_FWDVB_MASK 0x00000700 /* PLL forward divider B value */
|
||||
#define PLLD_FBDV_MASK 0x1F000000 /* PLL feedback divider value */
|
||||
#define PLLD_FWDVA_MASK 0x000F0000 /* PLL forward divider A value */
|
||||
#define PLLD_FWDVB_MASK 0x00000700 /* PLL forward divider B value */
|
||||
|
||||
#define PRIMAD_CPUDV_MASK 0x0F000000 /* CPU Clock Divisor Mask */
|
||||
#define PRIMAD_PLBDV_MASK 0x000F0000 /* PLB Clock Divisor Mask */
|
||||
#define PRIMAD_OPBDV_MASK 0x00000F00 /* OPB Clock Divisor Mask */
|
||||
#define PRIMAD_EBCDV_MASK 0x0000000F /* EBC Clock Divisor Mask */
|
||||
#define PRIMAD_CPUDV_MASK 0x0F000000 /* CPU Clock Divisor Mask */
|
||||
#define PRIMAD_PLBDV_MASK 0x000F0000 /* PLB Clock Divisor Mask */
|
||||
#define PRIMAD_OPBDV_MASK 0x00000F00 /* OPB Clock Divisor Mask */
|
||||
#define PRIMAD_EBCDV_MASK 0x0000000F /* EBC Clock Divisor Mask */
|
||||
|
||||
#define PERD0_PWMDV_MASK 0xFF000000 /* PWM Divider Mask */
|
||||
#define PERD0_SPIDV_MASK 0x000F0000 /* SPI Divider Mask */
|
||||
#define PERD0_U0DV_MASK 0x0000FF00 /* UART 0 Divider Mask */
|
||||
#define PERD0_U1DV_MASK 0x000000FF /* UART 1 Divider Mask */
|
||||
#define PERD0_PWMDV_MASK 0xFF000000 /* PWM Divider Mask */
|
||||
#define PERD0_SPIDV_MASK 0x000F0000 /* SPI Divider Mask */
|
||||
#define PERD0_U0DV_MASK 0x0000FF00 /* UART 0 Divider Mask */
|
||||
#define PERD0_U1DV_MASK 0x000000FF /* UART 1 Divider Mask */
|
||||
|
||||
#else /* #ifdef CONFIG_405EP */
|
||||
/******************************************************************************
|
||||
@ -462,13 +462,13 @@
|
||||
#define CPC0_ECR 0xaa /* edge conditioner register */
|
||||
|
||||
/* Bit definitions */
|
||||
#define PLLMR_FWD_DIV_MASK 0xE0000000 /* Forward Divisor */
|
||||
#define PLLMR_FWD_DIV_MASK 0xE0000000 /* Forward Divisor */
|
||||
#define PLLMR_FWD_DIV_BYPASS 0xE0000000
|
||||
#define PLLMR_FWD_DIV_3 0xA0000000
|
||||
#define PLLMR_FWD_DIV_4 0x80000000
|
||||
#define PLLMR_FWD_DIV_6 0x40000000
|
||||
|
||||
#define PLLMR_FB_DIV_MASK 0x1E000000 /* Feedback Divisor */
|
||||
#define PLLMR_FB_DIV_MASK 0x1E000000 /* Feedback Divisor */
|
||||
#define PLLMR_FB_DIV_1 0x02000000
|
||||
#define PLLMR_FB_DIV_2 0x04000000
|
||||
#define PLLMR_FB_DIV_3 0x06000000
|
||||
@ -476,32 +476,32 @@
|
||||
|
||||
#define PLLMR_TUNING_MASK 0x01F80000
|
||||
|
||||
#define PLLMR_CPU_TO_PLB_MASK 0x00060000 /* CPU:PLB Frequency Divisor */
|
||||
#define PLLMR_CPU_TO_PLB_MASK 0x00060000 /* CPU:PLB Frequency Divisor */
|
||||
#define PLLMR_CPU_PLB_DIV_1 0x00000000
|
||||
#define PLLMR_CPU_PLB_DIV_2 0x00020000
|
||||
#define PLLMR_CPU_PLB_DIV_3 0x00040000
|
||||
#define PLLMR_CPU_PLB_DIV_4 0x00060000
|
||||
|
||||
#define PLLMR_OPB_TO_PLB_MASK 0x00018000 /* OPB:PLB Frequency Divisor */
|
||||
#define PLLMR_OPB_TO_PLB_MASK 0x00018000 /* OPB:PLB Frequency Divisor */
|
||||
#define PLLMR_OPB_PLB_DIV_1 0x00000000
|
||||
#define PLLMR_OPB_PLB_DIV_2 0x00008000
|
||||
#define PLLMR_OPB_PLB_DIV_3 0x00010000
|
||||
#define PLLMR_OPB_PLB_DIV_4 0x00018000
|
||||
|
||||
#define PLLMR_PCI_TO_PLB_MASK 0x00006000 /* PCI:PLB Frequency Divisor */
|
||||
#define PLLMR_PCI_TO_PLB_MASK 0x00006000 /* PCI:PLB Frequency Divisor */
|
||||
#define PLLMR_PCI_PLB_DIV_1 0x00000000
|
||||
#define PLLMR_PCI_PLB_DIV_2 0x00002000
|
||||
#define PLLMR_PCI_PLB_DIV_3 0x00004000
|
||||
#define PLLMR_PCI_PLB_DIV_4 0x00006000
|
||||
|
||||
#define PLLMR_EXB_TO_PLB_MASK 0x00001800 /* External Bus:PLB Divisor */
|
||||
#define PLLMR_EXB_TO_PLB_MASK 0x00001800 /* External Bus:PLB Divisor */
|
||||
#define PLLMR_EXB_PLB_DIV_2 0x00000000
|
||||
#define PLLMR_EXB_PLB_DIV_3 0x00000800
|
||||
#define PLLMR_EXB_PLB_DIV_4 0x00001000
|
||||
#define PLLMR_EXB_PLB_DIV_5 0x00001800
|
||||
|
||||
/* definitions for PPC405GPr (new mode strapping) */
|
||||
#define PLLMR_FWDB_DIV_MASK 0x00000007 /* Forward Divisor B */
|
||||
#define PLLMR_FWDB_DIV_MASK 0x00000007 /* Forward Divisor B */
|
||||
|
||||
#define PSR_PLL_FWD_MASK 0xC0000000
|
||||
#define PSR_PLL_FDBACK_MASK 0x30000000
|
||||
@ -513,15 +513,15 @@
|
||||
#define PSR_ROM_WIDTH_MASK 0x00018000
|
||||
#define PSR_ROM_LOC 0x00004000
|
||||
#define PSR_PCI_ASYNC_EN 0x00001000
|
||||
#define PSR_PERCLK_SYNC_MODE_EN 0x00000800 /* PPC405GPr only */
|
||||
#define PSR_PERCLK_SYNC_MODE_EN 0x00000800 /* PPC405GPr only */
|
||||
#define PSR_PCI_ARBIT_EN 0x00000400
|
||||
#define PSR_NEW_MODE_EN 0x00000020 /* PPC405GPr only */
|
||||
#define PSR_NEW_MODE_EN 0x00000020 /* PPC405GPr only */
|
||||
|
||||
#ifndef CONFIG_IOP480
|
||||
/*
|
||||
* PLL Voltage Controlled Oscillator (VCO) definitions
|
||||
* Maximum and minimum values (in MHz) for correct PLL operation.
|
||||
*/
|
||||
*/
|
||||
#define VCO_MIN 400
|
||||
#define VCO_MAX 800
|
||||
#endif /* #ifndef CONFIG_IOP480 */
|
||||
@ -535,35 +535,35 @@
|
||||
#else
|
||||
#define MAL_DCR_BASE 0x180
|
||||
#endif
|
||||
#define MAL0_CFG (MAL_DCR_BASE + 0x00) /* MAL Config reg */
|
||||
#define MAL0_ESR (MAL_DCR_BASE + 0x01) /* Err Status (Read/Clear)*/
|
||||
#define MAL0_IER (MAL_DCR_BASE + 0x02) /* Interrupt enable */
|
||||
#define MAL0_TXCASR (MAL_DCR_BASE + 0x04) /* TX Channel active (set)*/
|
||||
#define MAL0_TXCARR (MAL_DCR_BASE + 0x05) /* TX Channel active (reset)*/
|
||||
#define MAL0_TXEOBISR (MAL_DCR_BASE + 0x06) /* TX End of buffer int status*/
|
||||
#define MAL0_TXDEIR (MAL_DCR_BASE + 0x07) /* TX Descr. Error Int reg */
|
||||
#define MAL0_RXCASR (MAL_DCR_BASE + 0x10) /* RX Channel active (set) */
|
||||
#define MAL0_RXCARR (MAL_DCR_BASE + 0x11) /* RX Channel active (reset) */
|
||||
#define MAL0_RXEOBISR (MAL_DCR_BASE + 0x12) /* RX End of buffer int status*/
|
||||
#define MAL0_RXDEIR (MAL_DCR_BASE + 0x13) /* RX Descr. Error Int reg */
|
||||
#define MAL0_TXCTP0R (MAL_DCR_BASE + 0x20) /* TX 0 Channel table ptr */
|
||||
#define MAL0_TXCTP1R (MAL_DCR_BASE + 0x21) /* TX 1 Channel table ptr */
|
||||
#define MAL0_TXCTP2R (MAL_DCR_BASE + 0x22) /* TX 2 Channel table ptr */
|
||||
#define MAL0_TXCTP3R (MAL_DCR_BASE + 0x23) /* TX 3 Channel table ptr */
|
||||
#define MAL0_RXCTP0R (MAL_DCR_BASE + 0x40) /* RX 0 Channel table ptr */
|
||||
#define MAL0_RXCTP1R (MAL_DCR_BASE + 0x41) /* RX 1 Channel table ptr */
|
||||
#define MAL0_RXCTP2R (MAL_DCR_BASE + 0x42) /* RX 2 Channel table ptr */
|
||||
#define MAL0_RXCTP3R (MAL_DCR_BASE + 0x43) /* RX 3 Channel table ptr */
|
||||
#define MAL0_RXCTP8R (MAL_DCR_BASE + 0x48) /* RX 8 Channel table ptr */
|
||||
#define MAL0_RXCTP16R (MAL_DCR_BASE + 0x50) /* RX 16 Channel table ptr */
|
||||
#define MAL0_RXCTP24R (MAL_DCR_BASE + 0x58) /* RX 24 Channel table ptr */
|
||||
#define MAL0_RCBS0 (MAL_DCR_BASE + 0x60) /* RX 0 Channel buffer size */
|
||||
#define MAL0_RCBS1 (MAL_DCR_BASE + 0x61) /* RX 1 Channel buffer size */
|
||||
#define MAL0_RCBS2 (MAL_DCR_BASE + 0x62) /* RX 2 Channel buffer size */
|
||||
#define MAL0_RCBS3 (MAL_DCR_BASE + 0x63) /* RX 3 Channel buffer size */
|
||||
#define MAL0_RCBS8 (MAL_DCR_BASE + 0x68) /* RX 8 Channel buffer size */
|
||||
#define MAL0_RCBS16 (MAL_DCR_BASE + 0x70) /* RX 16 Channel buffer size */
|
||||
#define MAL0_RCBS24 (MAL_DCR_BASE + 0x78) /* RX 24 Channel buffer size */
|
||||
#define MAL0_CFG (MAL_DCR_BASE + 0x00) /* MAL Config reg */
|
||||
#define MAL0_ESR (MAL_DCR_BASE + 0x01) /* Err Status (Read/Clear) */
|
||||
#define MAL0_IER (MAL_DCR_BASE + 0x02) /* Interrupt enable */
|
||||
#define MAL0_TXCASR (MAL_DCR_BASE + 0x04) /* TX Channel active (set) */
|
||||
#define MAL0_TXCARR (MAL_DCR_BASE + 0x05) /* TX Channel active (reset) */
|
||||
#define MAL0_TXEOBISR (MAL_DCR_BASE + 0x06) /* TX End of buffer int status */
|
||||
#define MAL0_TXDEIR (MAL_DCR_BASE + 0x07) /* TX Descr. Error Int reg */
|
||||
#define MAL0_RXCASR (MAL_DCR_BASE + 0x10) /* RX Channel active (set) */
|
||||
#define MAL0_RXCARR (MAL_DCR_BASE + 0x11) /* RX Channel active (reset) */
|
||||
#define MAL0_RXEOBISR (MAL_DCR_BASE + 0x12) /* RX End of buffer int status */
|
||||
#define MAL0_RXDEIR (MAL_DCR_BASE + 0x13) /* RX Descr. Error Int reg */
|
||||
#define MAL0_TXCTP0R (MAL_DCR_BASE + 0x20) /* TX 0 Channel table ptr */
|
||||
#define MAL0_TXCTP1R (MAL_DCR_BASE + 0x21) /* TX 1 Channel table ptr */
|
||||
#define MAL0_TXCTP2R (MAL_DCR_BASE + 0x22) /* TX 2 Channel table ptr */
|
||||
#define MAL0_TXCTP3R (MAL_DCR_BASE + 0x23) /* TX 3 Channel table ptr */
|
||||
#define MAL0_RXCTP0R (MAL_DCR_BASE + 0x40) /* RX 0 Channel table ptr */
|
||||
#define MAL0_RXCTP1R (MAL_DCR_BASE + 0x41) /* RX 1 Channel table ptr */
|
||||
#define MAL0_RXCTP2R (MAL_DCR_BASE + 0x42) /* RX 2 Channel table ptr */
|
||||
#define MAL0_RXCTP3R (MAL_DCR_BASE + 0x43) /* RX 3 Channel table ptr */
|
||||
#define MAL0_RXCTP8R (MAL_DCR_BASE + 0x48) /* RX 8 Channel table ptr */
|
||||
#define MAL0_RXCTP16R (MAL_DCR_BASE + 0x50) /* RX 16 Channel table ptr */
|
||||
#define MAL0_RXCTP24R (MAL_DCR_BASE + 0x58) /* RX 24 Channel table ptr */
|
||||
#define MAL0_RCBS0 (MAL_DCR_BASE + 0x60) /* RX 0 Channel buffer size */
|
||||
#define MAL0_RCBS1 (MAL_DCR_BASE + 0x61) /* RX 1 Channel buffer size */
|
||||
#define MAL0_RCBS2 (MAL_DCR_BASE + 0x62) /* RX 2 Channel buffer size */
|
||||
#define MAL0_RCBS3 (MAL_DCR_BASE + 0x63) /* RX 3 Channel buffer size */
|
||||
#define MAL0_RCBS8 (MAL_DCR_BASE + 0x68) /* RX 8 Channel buffer size */
|
||||
#define MAL0_RCBS16 (MAL_DCR_BASE + 0x70) /* RX 16 Channel buffer size */
|
||||
#define MAL0_RCBS24 (MAL_DCR_BASE + 0x78) /* RX 24 Channel buffer size */
|
||||
|
||||
/*-----------------------------------------------------------------------------
|
||||
| IIC Register Offsets
|
||||
@ -610,7 +610,7 @@
|
||||
#define OCM0_DSRC2 (OCM_DCR_BASE + 0x09) /* OCM D-side Bank 2 Config */
|
||||
#define OCM0_ISRC1 (OCM_DCR_BASE + 0x0A) /* OCM I-side Bank 1Config */
|
||||
#define OCM0_ISRC2 (OCM_DCR_BASE + 0x0B) /* OCM I-side Bank 2 Config */
|
||||
#define OCM0_DISDPC (OCM_DCR_BASE + 0x0C) /* OCM D-/I-side Data Par Chk*/
|
||||
#define OCM0_DISDPC (OCM_DCR_BASE + 0x0C) /* OCM D-/I-side Data Par Chk */
|
||||
#else
|
||||
#define OCM_DCR_BASE 0x018
|
||||
#define OCM0_ISCNTL (OCM_DCR_BASE+0x01) /* OCM I-side control reg */
|
||||
@ -746,14 +746,14 @@
|
||||
#define SDR0_MFR 0x4300 /* SDR0_MFR reg */
|
||||
|
||||
/* Defines for CPC0_EPRCSR register */
|
||||
#define CPC0_EPRCSR_E0NFE 0x80000000
|
||||
#define CPC0_EPRCSR_E1NFE 0x40000000
|
||||
#define CPC0_EPRCSR_E1RPP 0x00000080
|
||||
#define CPC0_EPRCSR_E0RPP 0x00000040
|
||||
#define CPC0_EPRCSR_E1ERP 0x00000020
|
||||
#define CPC0_EPRCSR_E0ERP 0x00000010
|
||||
#define CPC0_EPRCSR_E1PCI 0x00000002
|
||||
#define CPC0_EPRCSR_E0PCI 0x00000001
|
||||
#define CPC0_EPRCSR_E0NFE 0x80000000
|
||||
#define CPC0_EPRCSR_E1NFE 0x40000000
|
||||
#define CPC0_EPRCSR_E1RPP 0x00000080
|
||||
#define CPC0_EPRCSR_E0RPP 0x00000040
|
||||
#define CPC0_EPRCSR_E1ERP 0x00000020
|
||||
#define CPC0_EPRCSR_E0ERP 0x00000010
|
||||
#define CPC0_EPRCSR_E1PCI 0x00000002
|
||||
#define CPC0_EPRCSR_E0PCI 0x00000001
|
||||
|
||||
#define CPR0_CLKUPD 0x020
|
||||
#define CPR0_PLLC 0x040
|
||||
@ -770,46 +770,46 @@
|
||||
|
||||
/* CUST0 Customer Configuration Register0 */
|
||||
#define SDR0_CUST0 0x4000
|
||||
#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */
|
||||
#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */
|
||||
#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */
|
||||
#define SDR0_CUST0_MUX_GPIO_SEL 0xC0000000 /* GPIO Selection */
|
||||
#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */
|
||||
#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */
|
||||
#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */
|
||||
#define SDR0_CUST0_MUX_GPIO_SEL 0xC0000000 /* GPIO Selection */
|
||||
|
||||
#define SDR0_CUST0_NDFC_EN_MASK 0x20000000 /* NDFC Enable Mask */
|
||||
#define SDR0_CUST0_NDFC_ENABLE 0x20000000 /* NDFC Enable */
|
||||
#define SDR0_CUST0_NDFC_DISABLE 0x00000000 /* NDFC Disable */
|
||||
#define SDR0_CUST0_NDFC_EN_MASK 0x20000000 /* NDFC Enable Mask */
|
||||
#define SDR0_CUST0_NDFC_ENABLE 0x20000000 /* NDFC Enable */
|
||||
#define SDR0_CUST0_NDFC_DISABLE 0x00000000 /* NDFC Disable */
|
||||
|
||||
#define SDR0_CUST0_NDFC_BW_MASK 0x10000000 /* NDFC Boot Width */
|
||||
#define SDR0_CUST0_NDFC_BW_16_BIT 0x10000000 /* NDFC Boot Width = 16 Bit */
|
||||
#define SDR0_CUST0_NDFC_BW_8_BIT 0x00000000 /* NDFC Boot Width = 8 Bit */
|
||||
#define SDR0_CUST0_NDFC_BW_MASK 0x10000000 /* NDFC Boot Width */
|
||||
#define SDR0_CUST0_NDFC_BW_16_BIT 0x10000000 /* NDFC Boot Width= 16 Bit */
|
||||
#define SDR0_CUST0_NDFC_BW_8_BIT 0x00000000 /* NDFC Boot Width= 8 Bit */
|
||||
|
||||
#define SDR0_CUST0_NDFC_BP_MASK 0x0F000000 /* NDFC Boot Page */
|
||||
#define SDR0_CUST0_NDFC_BP_ENCODE(n) ((((unsigned long)(n))&0xF)<<24)
|
||||
#define SDR0_CUST0_NDFC_BP_DECODE(n) ((((unsigned long)(n))>>24)&0x0F)
|
||||
#define SDR0_CUST0_NDFC_BP_MASK 0x0F000000 /* NDFC Boot Page */
|
||||
#define SDR0_CUST0_NDFC_BP_ENCODE(n) ((((unsigned long)(n))&0xF)<<24)
|
||||
#define SDR0_CUST0_NDFC_BP_DECODE(n) ((((unsigned long)(n))>>24)&0x0F)
|
||||
|
||||
#define SDR0_CUST0_NDFC_BAC_MASK 0x00C00000 /* NDFC Boot Address Cycle */
|
||||
#define SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((unsigned long)(n))&0x3)<<22)
|
||||
#define SDR0_CUST0_NDFC_BAC_DECODE(n) ((((unsigned long)(n))>>22)&0x03)
|
||||
#define SDR0_CUST0_NDFC_BAC_MASK 0x00C00000 /* NDFC Boot Address Cycle */
|
||||
#define SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((unsigned long)(n))&0x3)<<22)
|
||||
#define SDR0_CUST0_NDFC_BAC_DECODE(n) ((((unsigned long)(n))>>22)&0x03)
|
||||
|
||||
#define SDR0_CUST0_NDFC_ARE_MASK 0x00200000 /* NDFC Auto Read Enable */
|
||||
#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */
|
||||
#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */
|
||||
#define SDR0_CUST0_NDFC_ARE_MASK 0x00200000 /* NDFC Auto Read Enable */
|
||||
#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */
|
||||
#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */
|
||||
|
||||
#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */
|
||||
#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */
|
||||
#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */
|
||||
#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */
|
||||
#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */
|
||||
#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */
|
||||
|
||||
#define SDR0_CUST0_NDRSC_MASK 0x0000FFF0 /* NDFC Device Reset Count Mask */
|
||||
#define SDR0_CUST0_NDRSC_ENCODE(n) ((((unsigned long)(n))&0xFFF)<<4)
|
||||
#define SDR0_CUST0_NDRSC_DECODE(n) ((((unsigned long)(n))>>4)&0xFFF)
|
||||
#define SDR0_CUST0_NDRSC_MASK 0x0000FFF0 /* NDFC Device Reset Count Mask */
|
||||
#define SDR0_CUST0_NDRSC_ENCODE(n) ((((unsigned long)(n))&0xFFF)<<4)
|
||||
#define SDR0_CUST0_NDRSC_DECODE(n) ((((unsigned long)(n))>>4)&0xFFF)
|
||||
|
||||
#define SDR0_CUST0_CHIPSELGAT_MASK 0x0000000F /* Chip Select Gating Mask */
|
||||
#define SDR0_CUST0_CHIPSELGAT_DIS 0x00000000 /* Chip Select Gating Disable */
|
||||
#define SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F /* All Chip Select Gating Enable */
|
||||
#define SDR0_CUST0_CHIPSELGAT_EN0 0x00000008 /* Chip Select0 Gating Enable */
|
||||
#define SDR0_CUST0_CHIPSELGAT_EN1 0x00000004 /* Chip Select1 Gating Enable */
|
||||
#define SDR0_CUST0_CHIPSELGAT_EN2 0x00000002 /* Chip Select2 Gating Enable */
|
||||
#define SDR0_CUST0_CHIPSELGAT_EN3 0x00000001 /* Chip Select3 Gating Enable */
|
||||
#define SDR0_CUST0_CHIPSELGAT_MASK 0x0000000F /* Chip Sel Gating Mask */
|
||||
#define SDR0_CUST0_CHIPSELGAT_DIS 0x00000000 /* Chip Sel Gating Disable */
|
||||
#define SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F /* All Chip Sel Gating Enable */
|
||||
#define SDR0_CUST0_CHIPSELGAT_EN0 0x00000008 /* Chip Sel0 Gating Enable */
|
||||
#define SDR0_CUST0_CHIPSELGAT_EN1 0x00000004 /* Chip Sel1 Gating Enable */
|
||||
#define SDR0_CUST0_CHIPSELGAT_EN2 0x00000002 /* Chip Sel2 Gating Enable */
|
||||
#define SDR0_CUST0_CHIPSELGAT_EN3 0x00000001 /* Chip Sel3 Gating Enable */
|
||||
|
||||
#define SDR0_PFC0 0x4100
|
||||
#define SDR0_PFC1 0x4101
|
||||
|
||||
1176
include/ppc440.h
1176
include/ppc440.h
File diff suppressed because it is too large
Load Diff
@ -136,12 +136,12 @@
|
||||
* Common stuff for 4xx (405 and 440)
|
||||
*/
|
||||
|
||||
#define EXC_OFF_SYS_RESET 0x0100 /* System reset */
|
||||
#define EXC_OFF_SYS_RESET 0x0100 /* System reset */
|
||||
#define _START_OFFSET (EXC_OFF_SYS_RESET + 0x2000)
|
||||
|
||||
#define RESET_VECTOR 0xfffffffc
|
||||
#define CACHELINE_MASK (CONFIG_SYS_CACHELINE_SIZE - 1) /* Address mask for cache
|
||||
line aligned data. */
|
||||
#define CACHELINE_MASK (CONFIG_SYS_CACHELINE_SIZE - 1) /* Address mask for
|
||||
cache line aligned data. */
|
||||
|
||||
#define CPR0_DCR_BASE 0x0C
|
||||
#define CPR0_CFGADDR (CPR0_DCR_BASE + 0x0)
|
||||
@ -162,17 +162,25 @@
|
||||
/*
|
||||
* Macros for indirect DCR access
|
||||
*/
|
||||
#define mtcpr(reg, d) do { mtdcr(CPR0_CFGADDR,reg);mtdcr(CPR0_CFGDATA,d); } while (0)
|
||||
#define mfcpr(reg, d) do { mtdcr(CPR0_CFGADDR,reg);d = mfdcr(CPR0_CFGDATA); } while (0)
|
||||
#define mtcpr(reg, d) \
|
||||
do { mtdcr(CPR0_CFGADDR, reg); mtdcr(CPR0_CFGDATA, d); } while (0)
|
||||
#define mfcpr(reg, d) \
|
||||
do { mtdcr(CPR0_CFGADDR, reg); d = mfdcr(CPR0_CFGDATA); } while (0)
|
||||
|
||||
#define mtebc(reg, d) do { mtdcr(EBC0_CFGADDR,reg);mtdcr(EBC0_CFGDATA,d); } while (0)
|
||||
#define mfebc(reg, d) do { mtdcr(EBC0_CFGADDR,reg);d = mfdcr(EBC0_CFGDATA); } while (0)
|
||||
#define mtebc(reg, d) \
|
||||
do { mtdcr(EBC0_CFGADDR, reg); mtdcr(EBC0_CFGDATA, d); } while (0)
|
||||
#define mfebc(reg, d) \
|
||||
do { mtdcr(EBC0_CFGADDR, reg); d = mfdcr(EBC0_CFGDATA); } while (0)
|
||||
|
||||
#define mtsdram(reg, d) do { mtdcr(SDRAM0_CFGADDR,reg);mtdcr(SDRAM0_CFGDATA,d); } while (0)
|
||||
#define mfsdram(reg, d) do { mtdcr(SDRAM0_CFGADDR,reg);d = mfdcr(SDRAM0_CFGDATA); } while (0)
|
||||
#define mtsdram(reg, d) \
|
||||
do { mtdcr(SDRAM0_CFGADDR, reg); mtdcr(SDRAM0_CFGDATA, d); } while (0)
|
||||
#define mfsdram(reg, d) \
|
||||
do { mtdcr(SDRAM0_CFGADDR, reg); d = mfdcr(SDRAM0_CFGDATA); } while (0)
|
||||
|
||||
#define mtsdr(reg, d) do { mtdcr(SDR0_CFGADDR,reg);mtdcr(SDR0_CFGDATA,d); } while (0)
|
||||
#define mfsdr(reg, d) do { mtdcr(SDR0_CFGADDR,reg);d = mfdcr(SDR0_CFGDATA); } while (0)
|
||||
#define mtsdr(reg, d) \
|
||||
do { mtdcr(SDR0_CFGADDR, reg); mtdcr(SDR0_CFGDATA, d); } while (0)
|
||||
#define mfsdr(reg, d) \
|
||||
do { mtdcr(SDR0_CFGADDR, reg); d = mfdcr(SDR0_CFGDATA); } while (0)
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
|
||||
@ -119,11 +119,11 @@ typedef struct emac_4xx_hw_st {
|
||||
int first_init;
|
||||
int tx_err_index;
|
||||
int rx_err_index;
|
||||
int rx_slot; /* MAL Receive Slot */
|
||||
int rx_i_index; /* Receive Interrupt Queue Index */
|
||||
int rx_u_index; /* Receive User Queue Index */
|
||||
int tx_slot; /* MAL Transmit Slot */
|
||||
int tx_i_index; /* Transmit Interrupt Queue Index */
|
||||
int rx_slot; /* MAL Receive Slot */
|
||||
int rx_i_index; /* Receive Interrupt Queue Index */
|
||||
int rx_u_index; /* Receive User Queue Index */
|
||||
int tx_slot; /* MAL Transmit Slot */
|
||||
int tx_i_index; /* Transmit Interrupt Queue Index */
|
||||
int tx_u_index; /* Transmit User Queue Index */
|
||||
int rx_ready[NUM_RX_BUFF]; /* Receive Ready Queue */
|
||||
int tx_run[NUM_TX_BUFF]; /* Transmit Running Queue */
|
||||
@ -262,16 +262,16 @@ typedef struct emac_4xx_hw_st {
|
||||
| TCP/IP Acceleration Hardware (TAH) 440GX Only
|
||||
+---------------------------------------------------------------------------*/
|
||||
#if defined(CONFIG_440GX)
|
||||
#define TAH_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0B50)
|
||||
#define TAH_REVID (TAH_BASE + 0x0) /* Revision ID (RO)*/
|
||||
#define TAH_MR (TAH_BASE + 0x10) /* Mode Register (R/W) */
|
||||
#define TAH_SSR0 (TAH_BASE + 0x14) /* Segment Size Reg 0 (R/W) */
|
||||
#define TAH_SSR1 (TAH_BASE + 0x18) /* Segment Size Reg 1 (R/W) */
|
||||
#define TAH_SSR2 (TAH_BASE + 0x1C) /* Segment Size Reg 2 (R/W) */
|
||||
#define TAH_SSR3 (TAH_BASE + 0x20) /* Segment Size Reg 3 (R/W) */
|
||||
#define TAH_SSR4 (TAH_BASE + 0x24) /* Segment Size Reg 4 (R/W) */
|
||||
#define TAH_SSR5 (TAH_BASE + 0x28) /* Segment Size Reg 5 (R/W) */
|
||||
#define TAH_TSR (TAH_BASE + 0x2C) /* Transmit Status Register (RO) */
|
||||
#define TAH_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0B50)
|
||||
#define TAH_REVID (TAH_BASE + 0x0) /* Revision ID (RO)*/
|
||||
#define TAH_MR (TAH_BASE + 0x10) /* Mode Register (R/W) */
|
||||
#define TAH_SSR0 (TAH_BASE + 0x14) /* Segment Size Reg 0 (R/W) */
|
||||
#define TAH_SSR1 (TAH_BASE + 0x18) /* Segment Size Reg 1 (R/W) */
|
||||
#define TAH_SSR2 (TAH_BASE + 0x1C) /* Segment Size Reg 2 (R/W) */
|
||||
#define TAH_SSR3 (TAH_BASE + 0x20) /* Segment Size Reg 3 (R/W) */
|
||||
#define TAH_SSR4 (TAH_BASE + 0x24) /* Segment Size Reg 4 (R/W) */
|
||||
#define TAH_SSR5 (TAH_BASE + 0x28) /* Segment Size Reg 5 (R/W) */
|
||||
#define TAH_TSR (TAH_BASE + 0x2C) /* Transmit Status Register (RO) */
|
||||
|
||||
/* TAH Revision */
|
||||
#define TAH_REV_RN_M (0x000FFF00) /* Revision Number */
|
||||
@ -281,45 +281,45 @@ typedef struct emac_4xx_hw_st {
|
||||
#define TAH_REV_BN_V (0)
|
||||
|
||||
/* TAH Mode Register */
|
||||
#define TAH_MR_CVR (0x80000000) /* Checksum verification on RX */
|
||||
#define TAH_MR_SR (0x40000000) /* Software reset */
|
||||
#define TAH_MR_ST (0x3F000000) /* Send Threshold */
|
||||
#define TAH_MR_TFS (0x00E00000) /* Transmit FIFO size */
|
||||
#define TAH_MR_DTFP (0x00100000) /* Disable TX FIFO parity */
|
||||
#define TAH_MR_DIG (0x00080000) /* Disable interrupt generation */
|
||||
#define TAH_MR_RSVD (0x0007FFFF) /* Reserved */
|
||||
#define TAH_MR_CVR (0x80000000) /* Checksum verification on RX */
|
||||
#define TAH_MR_SR (0x40000000) /* Software reset */
|
||||
#define TAH_MR_ST (0x3F000000) /* Send Threshold */
|
||||
#define TAH_MR_TFS (0x00E00000) /* Transmit FIFO size */
|
||||
#define TAH_MR_DTFP (0x00100000) /* Disable TX FIFO parity */
|
||||
#define TAH_MR_DIG (0x00080000) /* Disable interrupt generation */
|
||||
#define TAH_MR_RSVD (0x0007FFFF) /* Reserved */
|
||||
|
||||
#define TAH_MR_ST_V (20)
|
||||
#define TAH_MR_TFS_V (17)
|
||||
#define TAH_MR_ST_V (20)
|
||||
#define TAH_MR_TFS_V (17)
|
||||
|
||||
#define TAH_MR_TFS_2K (0x1) /* Transmit FIFO size 2Kbyte */
|
||||
#define TAH_MR_TFS_4K (0x2) /* Transmit FIFO size 4Kbyte */
|
||||
#define TAH_MR_TFS_6K (0x3) /* Transmit FIFO size 6Kbyte */
|
||||
#define TAH_MR_TFS_8K (0x4) /* Transmit FIFO size 8Kbyte */
|
||||
#define TAH_MR_TFS_10K (0x5) /* Transmit FIFO size 10Kbyte (max)*/
|
||||
#define TAH_MR_TFS_2K (0x1) /* Transmit FIFO size 2Kbyte */
|
||||
#define TAH_MR_TFS_4K (0x2) /* Transmit FIFO size 4Kbyte */
|
||||
#define TAH_MR_TFS_6K (0x3) /* Transmit FIFO size 6Kbyte */
|
||||
#define TAH_MR_TFS_8K (0x4) /* Transmit FIFO size 8Kbyte */
|
||||
#define TAH_MR_TFS_10K (0x5) /* Transmit FIFO size 10Kbyte (max)*/
|
||||
|
||||
|
||||
/* TAH Segment Size Registers 0:5 */
|
||||
#define TAH_SSR_RSVD0 (0xC0000000) /* Reserved */
|
||||
#define TAH_SSR_SS (0x3FFE0000) /* Segment size in multiples of 2 */
|
||||
#define TAH_SSR_RSVD1 (0x0001FFFF) /* Reserved */
|
||||
#define TAH_SSR_RSVD0 (0xC0000000) /* Reserved */
|
||||
#define TAH_SSR_SS (0x3FFE0000) /* Segment size in multiples of 2 */
|
||||
#define TAH_SSR_RSVD1 (0x0001FFFF) /* Reserved */
|
||||
|
||||
/* TAH Transmit Status Register */
|
||||
#define TAH_TSR_TFTS (0x80000000) /* Transmit FIFO too small */
|
||||
#define TAH_TSR_UH (0x40000000) /* Unrecognized header */
|
||||
#define TAH_TSR_NIPF (0x20000000) /* Not IPv4 */
|
||||
#define TAH_TSR_IPOP (0x10000000) /* IP option present */
|
||||
#define TAH_TSR_NISF (0x08000000) /* No IEEE SNAP format */
|
||||
#define TAH_TSR_ILTS (0x04000000) /* IP length too short */
|
||||
#define TAH_TSR_IPFP (0x02000000) /* IP fragment present */
|
||||
#define TAH_TSR_UP (0x01000000) /* Unsupported protocol */
|
||||
#define TAH_TSR_TFP (0x00800000) /* TCP flags present */
|
||||
#define TAH_TSR_SUDP (0x00400000) /* Segmentation for UDP */
|
||||
#define TAH_TSR_DLM (0x00200000) /* Data length mismatch */
|
||||
#define TAH_TSR_SIEEE (0x00100000) /* Segmentation for IEEE */
|
||||
#define TAH_TSR_TFPE (0x00080000) /* Transmit FIFO parity error */
|
||||
#define TAH_TSR_SSTS (0x00040000) /* Segment size too small */
|
||||
#define TAH_TSR_RSVD (0x0003FFFF) /* Reserved */
|
||||
#define TAH_TSR_TFTS (0x80000000) /* Transmit FIFO too small */
|
||||
#define TAH_TSR_UH (0x40000000) /* Unrecognized header */
|
||||
#define TAH_TSR_NIPF (0x20000000) /* Not IPv4 */
|
||||
#define TAH_TSR_IPOP (0x10000000) /* IP option present */
|
||||
#define TAH_TSR_NISF (0x08000000) /* No IEEE SNAP format */
|
||||
#define TAH_TSR_ILTS (0x04000000) /* IP length too short */
|
||||
#define TAH_TSR_IPFP (0x02000000) /* IP fragment present */
|
||||
#define TAH_TSR_UP (0x01000000) /* Unsupported protocol */
|
||||
#define TAH_TSR_TFP (0x00800000) /* TCP flags present */
|
||||
#define TAH_TSR_SUDP (0x00400000) /* Segmentation for UDP */
|
||||
#define TAH_TSR_DLM (0x00200000) /* Data length mismatch */
|
||||
#define TAH_TSR_SIEEE (0x00100000) /* Segmentation for IEEE */
|
||||
#define TAH_TSR_TFPE (0x00080000) /* Transmit FIFO parity error */
|
||||
#define TAH_TSR_SSTS (0x00040000) /* Segment size too small */
|
||||
#define TAH_TSR_RSVD (0x0003FFFF) /* Reserved */
|
||||
#endif /* CONFIG_440GX */
|
||||
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user