leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branch 'master' of git://git.denx.de/u-boot-mips

Browse Source 
* 'master' of git://git.denx.de/u-boot-mips:
  MIPS: Jz4740: Add qi_lb60 board support
  MIPS: Jz4740: Add NAND driver
  MIPS: Ingenic XBurst Jz4740 processor support
This commit is contained in:
Wolfgang Denk 2011-10-12 22:47:15 +02:00
commit d8fffa057c
20 changed files with 2804 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
MAINTAINERS
View File

@ -928,6 +928,10 @@ Stefan Roese <sr@denx.de>
vct_xxx MIPS32 4Kc
Xiangfu Liu <xiangfu@openmobilefree.net>
qi_lb60 MIPS32 (XBurst Jz4740 SoC)
#########################################################################
# Nios-II Systems: #
# #

4
MAKEALL
View File

@ -400,7 +400,9 @@ LIST_mips=" \
## MIPS Systems (little endian)
#########################################################################
LIST_mips4kc_el=""
LIST_mips4kc_el=" \
qi_lb60 \
"
LIST_mips5kc_el=""

1
README
View File

@ -181,6 +181,7 @@ Directory Hierarchy:
/mips Files generic to MIPS architecture
/cpu CPU specific files
/mips32 Files specific to MIPS32 CPUs
/xburst Files specific to Ingenic XBurst CPUs
/lib Architecture specific library files
/nios2 Files generic to Altera NIOS2 architecture
/cpu CPU specific files

49
arch/mips/cpu/xburst/Makefile Normal file
View File

@ -0,0 +1,49 @@
#
# Copyright (C) 2011 Xiangfu Liu <xiangfu@openmobilefree.net>
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(CPU).o
START = start.o
SOBJS-y =
COBJS-y = cpu.o timer.o jz_serial.o
COBJS-$(CONFIG_JZ4740) += jz4740.o
SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
START := $(addprefix $(obj),$(START))
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
$(call cmd_link_o_target, $(OBJS))
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################

24
arch/mips/cpu/xburst/config.mk Normal file
View File

@ -0,0 +1,24 @@
#
# Copyright (C) 2011 Xiangfu Liu <xiangfu@openmobilefree.net>
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
PLATFORM_CPPFLAGS += -march=mips32 -EL
PLATFORM_LDFLAGS += -EL

152
arch/mips/cpu/xburst/cpu.c Normal file
View File

@ -0,0 +1,152 @@
/*
* (C) Copyright 2003
* Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
* (C) Copyright 2011
* Xiangfu Liu <xiangfu@openmobilefree.net>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <command.h>
#include <netdev.h>
#include <asm/mipsregs.h>
#include <asm/cacheops.h>
#include <asm/reboot.h>
#include <asm/io.h>
#include <asm/jz4740.h>
#define cache_op(op, addr) \
__asm__ __volatile__( \
".set push\n" \
".set noreorder\n" \
".set mips3\n" \
"cache %0, %1\n" \
".set pop\n" \
: \
: "i" (op), "R" (*(unsigned char *)(addr)))
void __attribute__((weak)) _machine_restart(void)
{
struct jz4740_wdt *wdt = (struct jz4740_wdt *)JZ4740_WDT_BASE;
struct jz4740_tcu *tcu = (struct jz4740_tcu *)JZ4740_TCU_BASE;
u16 tmp;
/* wdt_select_extalclk() */
tmp = readw(&wdt->tcsr);
tmp &= ~(WDT_TCSR_EXT_EN | WDT_TCSR_RTC_EN | WDT_TCSR_PCK_EN);
tmp |= WDT_TCSR_EXT_EN;
writew(tmp, &wdt->tcsr);
/* wdt_select_clk_div64() */
tmp = readw(&wdt->tcsr);
tmp &= ~WDT_TCSR_PRESCALE_MASK;
tmp |= WDT_TCSR_PRESCALE64,
writew(tmp, &wdt->tcsr);
writew(100, &wdt->tdr); /* wdt_set_data(100) */
writew(0, &wdt->tcnt); /* wdt_set_count(0); */
writew(TCU_TSSR_WDTSC, &tcu->tscr); /* tcu_start_wdt_clock */
writeb(readb(&wdt->tcer) | WDT_TCER_TCEN, &wdt->tcer); /* wdt start */
while (1)
;
}
int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
_machine_restart();
fprintf(stderr, "*** reset failed ***\n");
return 0;
}
void flush_cache(ulong start_addr, ulong size)
{
unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
unsigned long addr = start_addr & ~(lsize - 1);
unsigned long aend = (start_addr + size - 1) & ~(lsize - 1);
for (; addr <= aend; addr += lsize) {
cache_op(Hit_Writeback_Inv_D, addr);
cache_op(Hit_Invalidate_I, addr);
}
}
void flush_dcache_range(ulong start_addr, ulong stop)
{
unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
unsigned long addr = start_addr & ~(lsize - 1);
unsigned long aend = (stop - 1) & ~(lsize - 1);
for (; addr <= aend; addr += lsize)
cache_op(Hit_Writeback_Inv_D, addr);
}
void invalidate_dcache_range(ulong start_addr, ulong stop)
{
unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
unsigned long addr = start_addr & ~(lsize - 1);
unsigned long aend = (stop - 1) & ~(lsize - 1);
for (; addr <= aend; addr += lsize)
cache_op(Hit_Invalidate_D, addr);
}
void flush_icache_all(void)
{
u32 addr, t = 0;
__asm__ __volatile__("mtc0 $0, $28"); /* Clear Taglo */
__asm__ __volatile__("mtc0 $0, $29"); /* Clear TagHi */
for (addr = CKSEG0; addr < CKSEG0 + CONFIG_SYS_ICACHE_SIZE;
addr += CONFIG_SYS_CACHELINE_SIZE) {
cache_op(Index_Store_Tag_I, addr);
}
/* invalidate btb */
__asm__ __volatile__(
".set mips32\n\t"
"mfc0 %0, $16, 7\n\t"
"nop\n\t"
"ori %0,2\n\t"
"mtc0 %0, $16, 7\n\t"
".set mips2\n\t"
:
: "r" (t));
}
void flush_dcache_all(void)
{
u32 addr;
for (addr = CKSEG0; addr < CKSEG0 + CONFIG_SYS_DCACHE_SIZE;
addr += CONFIG_SYS_CACHELINE_SIZE) {
cache_op(Index_Writeback_Inv_D, addr);
}
__asm__ __volatile__("sync");
}
void flush_cache_all(void)
{
flush_dcache_all();
flush_icache_all();
}

248
arch/mips/cpu/xburst/jz4740.c Normal file
View File

@ -0,0 +1,248 @@
/*
* Jz4740 common routines
* Copyright (c) 2006 Ingenic Semiconductor, <jlwei@ingenic.cn>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <common.h>
#include <asm/io.h>
#include <asm/jz4740.h>
void enable_interrupts(void)
{
}
int disable_interrupts(void)
{
return 0;
}
/*
* PLL output clock = EXTAL * NF / (NR * NO)
* NF = FD + 2, NR = RD + 2
* NO = 1 (if OD = 0), NO = 2 (if OD = 1 or 2), NO = 4 (if OD = 3)
*/
void pll_init(void)
{
struct jz4740_cpm *cpm = (struct jz4740_cpm *)JZ4740_CPM_BASE;
register unsigned int cfcr, plcr1;
int n2FR[33] = {
0, 0, 1, 2, 3, 0, 4, 0, 5, 0, 0, 0, 6, 0, 0, 0,
7, 0, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0, 0, 0,
9
};
int div[5] = {1, 3, 3, 3, 3}; /* divisors of I:S:P:L:M */
int nf, pllout2;
cfcr = CPM_CPCCR_CLKOEN |
CPM_CPCCR_PCS |
(n2FR[div[0]] << CPM_CPCCR_CDIV_BIT) |
(n2FR[div[1]] << CPM_CPCCR_HDIV_BIT) |
(n2FR[div[2]] << CPM_CPCCR_PDIV_BIT) |
(n2FR[div[3]] << CPM_CPCCR_MDIV_BIT) |
(n2FR[div[4]] << CPM_CPCCR_LDIV_BIT);
pllout2 = (cfcr & CPM_CPCCR_PCS) ?
CONFIG_SYS_CPU_SPEED : (CONFIG_SYS_CPU_SPEED / 2);
/* Init USB Host clock, pllout2 must be n*48MHz */
writel(pllout2 / 48000000 - 1, &cpm->uhccdr);
nf = CONFIG_SYS_CPU_SPEED * 2 / CONFIG_SYS_EXTAL;
plcr1 = ((nf - 2) << CPM_CPPCR_PLLM_BIT) | /* FD */
(0 << CPM_CPPCR_PLLN_BIT) | /* RD=0, NR=2 */
(0 << CPM_CPPCR_PLLOD_BIT) | /* OD=0, NO=1 */
(0x20 << CPM_CPPCR_PLLST_BIT) | /* PLL stable time */
CPM_CPPCR_PLLEN; /* enable PLL */
/* init PLL */
writel(cfcr, &cpm->cpccr);
writel(plcr1, &cpm->cppcr);
}
void sdram_init(void)
{
struct jz4740_emc *emc = (struct jz4740_emc *)JZ4740_EMC_BASE;
register unsigned int dmcr0, dmcr, sdmode, tmp, cpu_clk, mem_clk, ns;
unsigned int cas_latency_sdmr[2] = {
EMC_SDMR_CAS_2,
EMC_SDMR_CAS_3,
};
unsigned int cas_latency_dmcr[2] = {
1 << EMC_DMCR_TCL_BIT, /* CAS latency is 2 */
2 << EMC_DMCR_TCL_BIT /* CAS latency is 3 */
};
int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
cpu_clk = CONFIG_SYS_CPU_SPEED;
mem_clk = cpu_clk * div[__cpm_get_cdiv()] / div[__cpm_get_mdiv()];
writel(0, &emc->bcr); /* Disable bus release */
writew(0, &emc->rtcsr); /* Disable clock for counting */
/* Fault DMCR value for mode register setting*/
#define SDRAM_ROW0 11
#define SDRAM_COL0 8
#define SDRAM_BANK40 0
dmcr0 = ((SDRAM_ROW0 - 11) << EMC_DMCR_RA_BIT) |
((SDRAM_COL0 - 8) << EMC_DMCR_CA_BIT) |
(SDRAM_BANK40 << EMC_DMCR_BA_BIT) |
(SDRAM_BW16 << EMC_DMCR_BW_BIT) |
EMC_DMCR_EPIN |
cas_latency_dmcr[((SDRAM_CASL == 3) ? 1 : 0)];
/* Basic DMCR value */
dmcr = ((SDRAM_ROW - 11) << EMC_DMCR_RA_BIT) |
((SDRAM_COL - 8) << EMC_DMCR_CA_BIT) |
(SDRAM_BANK4 << EMC_DMCR_BA_BIT) |
(SDRAM_BW16 << EMC_DMCR_BW_BIT) |
EMC_DMCR_EPIN |
cas_latency_dmcr[((SDRAM_CASL == 3) ? 1 : 0)];
/* SDRAM timimg */
ns = 1000000000 / mem_clk;
tmp = SDRAM_TRAS / ns;
if (tmp < 4)
tmp = 4;
if (tmp > 11)
tmp = 11;
dmcr |= (tmp - 4) << EMC_DMCR_TRAS_BIT;
tmp = SDRAM_RCD / ns;
if (tmp > 3)
tmp = 3;
dmcr |= tmp << EMC_DMCR_RCD_BIT;
tmp = SDRAM_TPC / ns;
if (tmp > 7)
tmp = 7;
dmcr |= tmp << EMC_DMCR_TPC_BIT;
tmp = SDRAM_TRWL / ns;
if (tmp > 3)
tmp = 3;
dmcr |= tmp << EMC_DMCR_TRWL_BIT;
tmp = (SDRAM_TRAS + SDRAM_TPC) / ns;
if (tmp > 14)
tmp = 14;
dmcr |= ((tmp + 1) >> 1) << EMC_DMCR_TRC_BIT;
/* SDRAM mode value */
sdmode = EMC_SDMR_BT_SEQ |
EMC_SDMR_OM_NORMAL |
EMC_SDMR_BL_4 |
cas_latency_sdmr[((SDRAM_CASL == 3) ? 1 : 0)];
/* Stage 1. Precharge all banks by writing SDMR with DMCR.MRSET=0 */
writel(dmcr, &emc->dmcr);
writeb(0, JZ4740_EMC_SDMR0 | sdmode);
/* Wait for precharge, > 200us */
tmp = (cpu_clk / 1000000) * 1000;
while (tmp--)
;
/* Stage 2. Enable auto-refresh */
writel(dmcr | EMC_DMCR_RFSH, &emc->dmcr);
tmp = SDRAM_TREF / ns;
tmp = tmp / 64 + 1;
if (tmp > 0xff)
tmp = 0xff;
writew(tmp, &emc->rtcor);
writew(0, &emc->rtcnt);
/* Divisor is 64, CKO/64 */
writew(EMC_RTCSR_CKS_64, &emc->rtcsr);
/* Wait for number of auto-refresh cycles */
tmp = (cpu_clk / 1000000) * 1000;
while (tmp--)
;
/* Stage 3. Mode Register Set */
writel(dmcr0 | EMC_DMCR_RFSH | EMC_DMCR_MRSET, &emc->dmcr);
writeb(0, JZ4740_EMC_SDMR0 | sdmode);
/* Set back to basic DMCR value */
writel(dmcr | EMC_DMCR_RFSH | EMC_DMCR_MRSET, &emc->dmcr);
/* everything is ok now */
}
DECLARE_GLOBAL_DATA_PTR;
void calc_clocks(void)
{
unsigned int pllout;
unsigned int div[10] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
pllout = __cpm_get_pllout();
gd->cpu_clk = pllout / div[__cpm_get_cdiv()];
gd->sys_clk = pllout / div[__cpm_get_hdiv()];
gd->per_clk = pllout / div[__cpm_get_pdiv()];
gd->mem_clk = pllout / div[__cpm_get_mdiv()];
gd->dev_clk = CONFIG_SYS_EXTAL;
}
void rtc_init(void)
{
struct jz4740_rtc *rtc = (struct jz4740_rtc *)JZ4740_RTC_BASE;
while (!(readl(&rtc->rcr) & RTC_RCR_WRDY))
;
writel(readl(&rtc->rcr) | RTC_RCR_AE, &rtc->rcr); /* enable alarm */
while (!(readl(&rtc->rcr) & RTC_RCR_WRDY))
;
writel(0x00007fff, &rtc->rgr); /* type value */
while (!(readl(&rtc->rcr) & RTC_RCR_WRDY))
;
writel(0x0000ffe0, &rtc->hwfcr); /* Power on delay 2s */
while (!(readl(&rtc->rcr) & RTC_RCR_WRDY))
;
writel(0x00000fe0, &rtc->hrcr); /* reset delay 125ms */
}
/* U-Boot common routines */
phys_size_t initdram(int board_type)
{
struct jz4740_emc *emc = (struct jz4740_emc *)JZ4740_EMC_BASE;
u32 dmcr;
u32 rows, cols, dw, banks;
ulong size;
dmcr = readl(&emc->dmcr);
rows = 11 + ((dmcr & EMC_DMCR_RA_MASK) >> EMC_DMCR_RA_BIT);
cols = 8 + ((dmcr & EMC_DMCR_CA_MASK) >> EMC_DMCR_CA_BIT);
dw = (dmcr & EMC_DMCR_BW) ? 2 : 4;
banks = (dmcr & EMC_DMCR_BA) ? 4 : 2;
size = (1 << (rows + cols)) * dw * banks;
return size;
}

114
arch/mips/cpu/xburst/jz_serial.c Normal file
View File

@ -0,0 +1,114 @@
/*
* Jz4740 UART support
* Copyright (c) 2011
* Qi Hardware, Xiangfu Liu <xiangfu@sharism.cc>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <common.h>
#include <asm/io.h>
#include <asm/jz4740.h>
/*
* serial_init - initialize a channel
*
* This routine initializes the number of data bits, parity
* and set the selected baud rate. Interrupts are disabled.
* Set the modem control signals if the option is selected.
*
* RETURNS: N/A
*/
struct jz4740_uart *uart = (struct jz4740_uart *)CONFIG_SYS_UART_BASE;
int serial_init(void)
{
/* Disable port interrupts while changing hardware */
writeb(0, &uart->dlhr_ier);
/* Disable UART unit function */
writeb(~UART_FCR_UUE, &uart->iir_fcr);
/* Set both receiver and transmitter in UART mode (not SIR) */
writeb(~(SIRCR_RSIRE | SIRCR_TSIRE), &uart->isr);
/*
* Set databits, stopbits and parity.
* (8-bit data, 1 stopbit, no parity)
*/
writeb(UART_LCR_WLEN_8 | UART_LCR_STOP_1, &uart->lcr);
/* Set baud rate */
serial_setbrg();
/* Enable UART unit, enable and clear FIFO */
writeb(UART_FCR_UUE | UART_FCR_FE | UART_FCR_TFLS | UART_FCR_RFLS,
&uart->iir_fcr);
return 0;
}
void serial_setbrg(void)
{
u32 baud_div, tmp;
baud_div = CONFIG_SYS_EXTAL / 16 / CONFIG_BAUDRATE;
tmp = readb(&uart->lcr);
tmp |= UART_LCR_DLAB;
writeb(tmp, &uart->lcr);
writeb((baud_div >> 8) & 0xff, &uart->dlhr_ier);
writeb(baud_div & 0xff, &uart->rbr_thr_dllr);
tmp &= ~UART_LCR_DLAB;
writeb(tmp, &uart->lcr);
}
int serial_tstc(void)
{
if (readb(&uart->lsr) & UART_LSR_DR)
return 1;
return 0;
}
void serial_putc(const char c)
{
if (c == '\n')
serial_putc('\r');
/* Wait for fifo to shift out some bytes */
while (!((readb(&uart->lsr) & (UART_LSR_TDRQ | UART_LSR_TEMT)) == 0x60))
;
writeb((u8)c, &uart->rbr_thr_dllr);
}
int serial_getc(void)
{
while (!serial_tstc())
;
return readb(&uart->rbr_thr_dllr);
}
void serial_puts(const char *s)
{
while (*s)
serial_putc(*s++);
}

171
arch/mips/cpu/xburst/start.S Normal file
View File

@ -0,0 +1,171 @@
/*
* Startup Code for MIPS32 XBURST CPU-core
*
* Copyright (c) 2010 Xiangfu Liu <xiangfu@sharism.cc>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
#include <asm/regdef.h>
#include <asm/mipsregs.h>
#include <asm/addrspace.h>
#include <asm/cacheops.h>
.set noreorder
.globl _start
.text
_start:
/* Initialize $gp */
bal 1f
nop
.word _gp
1:
lw gp, 0(ra)
/* Set up temporary stack */
li sp, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET
la t9, board_init_f
jr t9
nop
/*
* void relocate_code (addr_sp, gd, addr_moni)
*
* This "function" does not return, instead it continues in RAM
* after relocating the monitor code.
*
* a0 = addr_sp
* a1 = gd
* a2 = destination address
*/
.globl relocate_code
.ent relocate_code
relocate_code:
move sp, a0 # set new stack pointer
li t0, CONFIG_SYS_MONITOR_BASE
la t3, in_ram
lw t2, -12(t3) # t2 <-- uboot_end_data
move t1, a2
/*
* Fix $gp:
*
* New $gp = (Old $gp - CONFIG_SYS_MONITOR_BASE) + Destination Address
*/
move t6, gp
sub gp, CONFIG_SYS_MONITOR_BASE
add gp, a2 # gp now adjusted
sub t6, gp, t6 # t6 <-- relocation offset
/*
* t0 = source address
* t1 = target address
* t2 = source end address
*/
1:
lw t3, 0(t0)
sw t3, 0(t1)
addu t0, 4
ble t0, t2, 1b
addu t1, 4
/* If caches were enabled, we would have to flush them here. */
/* flush d-cache */
li t0, KSEG0
addi t1, t0, CONFIG_SYS_DCACHE_SIZE
2:
cache Index_Writeback_Inv_D, 0(t0)
bne t0, t1, 2b
addi t0, CONFIG_SYS_CACHELINE_SIZE
sync
/* flush i-cache */
li t0, KSEG0
addi t1, t0, CONFIG_SYS_ICACHE_SIZE
3:
cache Index_Invalidate_I, 0(t0)
bne t0, t1, 3b
addi t0, CONFIG_SYS_CACHELINE_SIZE
/* Invalidate BTB */
mfc0 t0, CP0_CONFIG, 7
nop
ori t0, 2
mtc0 t0, CP0_CONFIG, 7
nop
/* Jump to where we've relocated ourselves */
addi t0, a2, in_ram - _start
jr t0
nop
.word _gp
.word _GLOBAL_OFFSET_TABLE_
.word uboot_end_data
.word uboot_end
.word num_got_entries
in_ram:
/*
* Now we want to update GOT.
*
* GOT[0] is reserved. GOT[1] is also reserved for the dynamic object
* generated by GNU ld. Skip these reserved entries from relocation.
*/
lw t3, -4(t0) # t3 <-- num_got_entries
lw t4, -16(t0) # t4 <-- _GLOBAL_OFFSET_TABLE_
lw t5, -20(t0) # t5 <-- _gp
sub t4, t5 # compute offset
add t4, t4, gp # t4 now holds relocated _G_O_T_
addi t4, t4, 8 # skipping first two entries
li t2, 2
1:
lw t1, 0(t4)
beqz t1, 2f
add t1, t6
sw t1, 0(t4)
2:
addi t2, 1
blt t2, t3, 1b
addi t4, 4
/* Clear BSS */
lw t1, -12(t0) # t1 <-- uboot_end_data
lw t2, -8(t0) # t2 <-- uboot_end
add t1, t6 # adjust pointers
add t2, t6
sub t1, 4
1: addi t1, 4
bltl t1, t2, 1b
sw zero, 0(t1)
move a0, a1 # a0 <-- gd
la t9, board_init_r
jr t9
move a1, a2
.end relocate_code

162
arch/mips/cpu/xburst/timer.c Normal file
View File

@ -0,0 +1,162 @@
/*
* Copyright (c) 2006
* Ingenic Semiconductor, <jlwei@ingenic.cn>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <common.h>
#include <asm/io.h>
#include <asm/jz4740.h>
#define TIMER_CHAN 0
#define TIMER_FDATA 0xffff /* Timer full data value */
DECLARE_GLOBAL_DATA_PTR;
static struct jz4740_tcu *tcu = (struct jz4740_tcu *)JZ4740_TCU_BASE;
void reset_timer_masked(void)
{
/* reset time */
gd->lastinc = readw(&tcu->tcnt0);
gd->tbl = 0;
}
ulong get_timer_masked(void)
{
ulong now = readw(&tcu->tcnt0);
if (gd->lastinc <= now)
gd->tbl += now - gd->lastinc; /* normal mode */
else {
/* we have an overflow ... */
gd->tbl += TIMER_FDATA + now - gd->lastinc;
}
gd->lastinc = now;
return gd->tbl;
}
void udelay_masked(unsigned long usec)
{
ulong tmo;
ulong endtime;
signed long diff;
/* normalize */
if (usec >= 1000) {
tmo = usec / 1000;
tmo *= CONFIG_SYS_HZ;
tmo /= 1000;
} else {
if (usec > 1) {
tmo = usec * CONFIG_SYS_HZ;
tmo /= 1000*1000;
} else
tmo = 1;
}
endtime = get_timer_masked() + tmo;
do {
ulong now = get_timer_masked();
diff = endtime - now;
} while (diff >= 0);
}
int timer_init(void)
{
writew(TCU_TCSR_PRESCALE256 | TCU_TCSR_EXT_EN, &tcu->tcsr0);
writew(0, &tcu->tcnt0);
writew(0, &tcu->tdhr0);
writew(TIMER_FDATA, &tcu->tdfr0);
/* mask irqs */
writel((1 << TIMER_CHAN) | (1 << (TIMER_CHAN + 16)), &tcu->tmsr);
writel(1 << TIMER_CHAN, &tcu->tscr); /* enable timer clock */
writeb(1 << TIMER_CHAN, &tcu->tesr); /* start counting up */
gd->lastinc = 0;
gd->tbl = 0;
return 0;
}
void reset_timer(void)
{
reset_timer_masked();
}
ulong get_timer(ulong base)
{
return get_timer_masked() - base;
}
void set_timer(ulong t)
{
gd->tbl = t;
}
void __udelay(unsigned long usec)
{
ulong tmo, tmp;
/* normalize */
if (usec >= 1000) {
tmo = usec / 1000;
tmo *= CONFIG_SYS_HZ;
tmo /= 1000;
} else {
if (usec >= 1) {
tmo = usec * CONFIG_SYS_HZ;
tmo /= 1000 * 1000;
} else
tmo = 1;
}
/* check for rollover during this delay */
tmp = get_timer(0);
if ((tmp + tmo) < tmp)
reset_timer_masked(); /* timer would roll over */
else
tmo += tmp;
while (get_timer_masked() < tmo)
;
}
/*
* This function is derived from PowerPC code (read timebase as long long).
* On MIPS it just returns the timer value.
*/
unsigned long long get_ticks(void)
{
return get_timer(0);
}
/*
* This function is derived from PowerPC code (timebase clock frequency).
* On MIPS it returns the number of timer ticks per second.
*/
ulong get_tbclk(void)
{
return CONFIG_SYS_HZ;
}

11
arch/mips/include/asm/global_data.h
View File

@ -39,6 +39,17 @@
typedef struct global_data {
bd_t *bd;
unsigned long flags;
#ifdef CONFIG_JZSOC
/* There are other clocks in the jz4740 */
unsigned long cpu_clk; /* CPU core clock */
unsigned long sys_clk; /* System bus clock */
unsigned long per_clk; /* Peripheral bus clock */
unsigned long mem_clk; /* Memory bus clock */
unsigned long dev_clk; /* Device clock */
/* "static data" needed by most of timer.c */
unsigned long tbl;
unsigned long lastinc;
#endif
unsigned long baudrate;
unsigned long have_console; /* serial_init() was called */
#ifdef CONFIG_PRE_CONSOLE_BUFFER

1150
arch/mips/include/asm/jz4740.h Normal file
View File

File diff suppressed because it is too large Load Diff

45
board/qi/qi_lb60/Makefile Normal file
View File

@ -0,0 +1,45 @@
#
# (C) Copyright 2006
# Ingenic Semiconductor, <jlwei@ingenic.cn>
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak $(obj).depend
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################

31
board/qi/qi_lb60/config.mk Normal file
View File

@ -0,0 +1,31 @@
#
# (C) Copyright 2006 Qi Hardware, Inc.
# Author: Xiangfu Liu <xiangfu.z@gmail.com>
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
#
# Qi Hardware, Inc. Ben NanoNote (QI_LB60)
#
ifndef TEXT_BASE
# ROM version
# TEXT_BASE = 0x88000000
# RAM version
TEXT_BASE = 0x80100000
endif

104
board/qi/qi_lb60/qi_lb60.c Normal file
View File

@ -0,0 +1,104 @@
/*
* Authors: Xiangfu Liu <xiangfu@sharism.cc>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 3 of the License, or (at your option) any later version.
*/
#include <common.h>
#include <asm/io.h>
#include <asm/jz4740.h>
DECLARE_GLOBAL_DATA_PTR;
static void gpio_init(void)
{
unsigned int i;
/* Initialize NAND Flash Pins */
__gpio_as_nand();
/* Initialize SDRAM pins */
__gpio_as_sdram_16bit_4720();
/* Initialize LCD pins */
__gpio_as_lcd_18bit();
/* Initialize MSC pins */
__gpio_as_msc();
/* Initialize Other pins */
for (i = 0; i < 7; i++) {
__gpio_as_input(GPIO_KEYIN_BASE + i);
__gpio_enable_pull(GPIO_KEYIN_BASE + i);
}
for (i = 0; i < 8; i++) {
__gpio_as_output(GPIO_KEYOUT_BASE + i);
__gpio_clear_pin(GPIO_KEYOUT_BASE + i);
}
__gpio_as_input(GPIO_KEYIN_8);
__gpio_enable_pull(GPIO_KEYIN_8);
/* enable the TP4, TP5 as UART0 */
__gpio_jtag_to_uart0();
__gpio_as_output(GPIO_AUDIO_POP);
__gpio_set_pin(GPIO_AUDIO_POP);
__gpio_as_output(GPIO_LCD_CS);
__gpio_clear_pin(GPIO_LCD_CS);
__gpio_as_output(GPIO_AMP_EN);
__gpio_clear_pin(GPIO_AMP_EN);
__gpio_as_output(GPIO_SDPW_EN);
__gpio_disable_pull(GPIO_SDPW_EN);
__gpio_clear_pin(GPIO_SDPW_EN);
__gpio_as_input(GPIO_SD_DETECT);
__gpio_disable_pull(GPIO_SD_DETECT);
__gpio_as_input(GPIO_USB_DETECT);
__gpio_enable_pull(GPIO_USB_DETECT);
}
static void cpm_init(void)
{
struct jz4740_cpm *cpm = (struct jz4740_cpm *)JZ4740_CPM_BASE;
uint32_t reg = readw(&cpm->clkgr);
reg |= CPM_CLKGR_IPU |
CPM_CLKGR_CIM |
CPM_CLKGR_I2C |
CPM_CLKGR_SSI |
CPM_CLKGR_UART1 |
CPM_CLKGR_SADC |
CPM_CLKGR_UHC |
CPM_CLKGR_UDC |
CPM_CLKGR_AIC1;
writew(reg, &cpm->clkgr);
}
int board_early_init_f(void)
{
gpio_init();
cpm_init();
calc_clocks(); /* calc the clocks */
rtc_init(); /* init rtc on any reset */
return 0;
}
/* U-Boot common routines */
int checkboard(void)
{
printf("Board: Qi LB60 (Ingenic XBurst Jz4740 SoC, Speed %ld MHz)\n",
gd->cpu_clk / 1000000);
return 0;
}

61
board/qi/qi_lb60/u-boot.lds Normal file
View File

@ -0,0 +1,61 @@
/*
* (C) Copyright 2006
* Ingenic Semiconductor, <jlwei@ingenic.cn>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips")
OUTPUT_ARCH(mips)
ENTRY(_start)
SECTIONS
{
. = 0x00000000;
. = ALIGN(4);
.text :
{
*(.text*)
}
. = ALIGN(4);
.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
. = ALIGN(4);
.data : { *(.data*) }
. = .;
_gp = ALIGN(16) + 0x7ff0;
__got_start = .;
.got : { *(.got) }
__got_end = .;
.sdata : { *(.sdata*) }
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
uboot_end_data = .;
num_got_entries = (__got_end - __got_start) >> 2;
. = ALIGN(4);
.sbss : { *(.sbss*) }
.bss : { *(.bss*) . = ALIGN(4); }
uboot_end = .;
}

1
boards.cfg
View File

@ -302,6 +302,7 @@ vct_platinumavc mips mips32 vct microna
vct_platinumavc_small mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_SMALL_IMAGE
vct_platinumavc_onenand mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_ONENAND
vct_platinumavc_onenand_small mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_ONENAND,VCT_SMALL_IMAGE
qi_lb60 mips xburst qi_lb60 qi
nios2-generic nios2 nios2 nios2-generic altera
PCI5441 nios2 nios2 pci5441 psyent
PK1C20 nios2 nios2 pk1c20 psyent

1
drivers/mtd/nand/Makefile
View File

@ -45,6 +45,7 @@ COBJS-$(CONFIG_NAND_DAVINCI) += davinci_nand.o
COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o
COBJS-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_nand.o
COBJS-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o
COBJS-$(CONFIG_NAND_JZ4740) += jz4740_nand.o
COBJS-$(CONFIG_NAND_KB9202) += kb9202_nand.o
COBJS-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o
COBJS-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o

261
drivers/mtd/nand/jz4740_nand.c Normal file
View File

@ -0,0 +1,261 @@
/*
* Platform independend driver for JZ4740.
*
* Copyright (c) 2007 Ingenic Semiconductor Inc.
* Author: <jlwei@ingenic.cn>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*/
#include <common.h>
#include <nand.h>
#include <asm/io.h>
#include <asm/jz4740.h>
#define JZ_NAND_DATA_ADDR ((void __iomem *)0xB8000000)
#define JZ_NAND_CMD_ADDR (JZ_NAND_DATA_ADDR + 0x8000)
#define JZ_NAND_ADDR_ADDR (JZ_NAND_DATA_ADDR + 0x10000)
#define BIT(x) (1 << (x))
#define JZ_NAND_ECC_CTRL_ENCODING BIT(3)
#define JZ_NAND_ECC_CTRL_RS BIT(2)
#define JZ_NAND_ECC_CTRL_RESET BIT(1)
#define JZ_NAND_ECC_CTRL_ENABLE BIT(0)
#define EMC_SMCR1_OPT_NAND 0x094c4400
/* Optimize the timing of nand */
static struct jz4740_emc * emc = (struct jz4740_emc *)JZ4740_EMC_BASE;
static struct nand_ecclayout qi_lb60_ecclayout_2gb = {
.eccbytes = 72,
.eccpos = {
12, 13, 14, 15, 16, 17, 18, 19,
20, 21, 22, 23, 24, 25, 26, 27,
28, 29, 30, 31, 32, 33, 34, 35,
36, 37, 38, 39, 40, 41, 42, 43,
44, 45, 46, 47, 48, 49, 50, 51,
52, 53, 54, 55, 56, 57, 58, 59,
60, 61, 62, 63, 64, 65, 66, 67,
68, 69, 70, 71, 72, 73, 74, 75,
76, 77, 78, 79, 80, 81, 82, 83 },
.oobfree = {
{.offset = 2,
.length = 10 },
{.offset = 84,
.length = 44 } }
};
static int is_reading;
static void jz_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
uint32_t reg;
if (ctrl & NAND_CTRL_CHANGE) {
if (ctrl & NAND_ALE)
this->IO_ADDR_W = JZ_NAND_ADDR_ADDR;
else if (ctrl & NAND_CLE)
this->IO_ADDR_W = JZ_NAND_CMD_ADDR;
else
this->IO_ADDR_W = JZ_NAND_DATA_ADDR;
reg = readl(&emc->nfcsr);
if (ctrl & NAND_NCE)
reg |= EMC_NFCSR_NFCE1;
else
reg &= ~EMC_NFCSR_NFCE1;
writel(reg, &emc->nfcsr);
}
if (cmd != NAND_CMD_NONE)
writeb(cmd, this->IO_ADDR_W);
}
static int jz_nand_device_ready(struct mtd_info *mtd)
{
return (readl(GPIO_PXPIN(2)) & 0x40000000) ? 1 : 0;
}
void board_nand_select_device(struct nand_chip *nand, int chip)
{
/*
* Don't use "chip" to address the NAND device,
* generate the cs from the address where it is encoded.
*/
}
static int jz_nand_rs_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
u_char *ecc_code)
{
uint32_t status;
int i;
if (is_reading)
return 0;
do {
status = readl(&emc->nfints);
} while (!(status & EMC_NFINTS_ENCF));
/* disable ecc */
writel(readl(&emc->nfecr) & ~EMC_NFECR_ECCE, &emc->nfecr);
for (i = 0; i < 9; i++)
ecc_code[i] = readb(&emc->nfpar[i]);
return 0;
}
static void jz_nand_hwctl(struct mtd_info *mtd, int mode)
{
uint32_t reg;
writel(0, &emc->nfints);
reg = readl(&emc->nfecr);
reg |= JZ_NAND_ECC_CTRL_RESET;
reg |= JZ_NAND_ECC_CTRL_ENABLE;
reg |= JZ_NAND_ECC_CTRL_RS;
switch (mode) {
case NAND_ECC_READ:
reg &= ~JZ_NAND_ECC_CTRL_ENCODING;
is_reading = 1;
break;
case NAND_ECC_WRITE:
reg |= JZ_NAND_ECC_CTRL_ENCODING;
is_reading = 0;
break;
default:
break;
}
writel(reg, &emc->nfecr);
}
/* Correct 1~9-bit errors in 512-bytes data */
static void jz_rs_correct(unsigned char *dat, int idx, int mask)
{
int i;
idx--;
i = idx + (idx >> 3);
if (i >= 512)
return;
mask <<= (idx & 0x7);
dat[i] ^= mask & 0xff;
if (i < 511)
dat[i + 1] ^= (mask >> 8) & 0xff;
}
static int jz_nand_rs_correct_data(struct mtd_info *mtd, u_char *dat,
u_char *read_ecc, u_char *calc_ecc)
{
int k;
uint32_t errcnt, index, mask, status;
/* Set PAR values */
const uint8_t all_ff_ecc[] = {
0xcd, 0x9d, 0x90, 0x58, 0xf4, 0x8b, 0xff, 0xb7, 0x6f };
if (read_ecc[0] == 0xff && read_ecc[1] == 0xff &&
read_ecc[2] == 0xff && read_ecc[3] == 0xff &&
read_ecc[4] == 0xff && read_ecc[5] == 0xff &&
read_ecc[6] == 0xff && read_ecc[7] == 0xff &&
read_ecc[8] == 0xff) {
for (k = 0; k < 9; k++)
writeb(all_ff_ecc[k], &emc->nfpar[k]);
} else {
for (k = 0; k < 9; k++)
writeb(read_ecc[k], &emc->nfpar[k]);
}
/* Set PRDY */
writel(readl(&emc->nfecr) | EMC_NFECR_PRDY, &emc->nfecr);
/* Wait for completion */
do {
status = readl(&emc->nfints);
} while (!(status & EMC_NFINTS_DECF));
/* disable ecc */
writel(readl(&emc->nfecr) & ~EMC_NFECR_ECCE, &emc->nfecr);
/* Check decoding */
if (!(status & EMC_NFINTS_ERR))
return 0;
if (status & EMC_NFINTS_UNCOR) {
printf("uncorrectable ecc\n");
return -1;
}
errcnt = (status & EMC_NFINTS_ERRCNT_MASK) >> EMC_NFINTS_ERRCNT_BIT;
switch (errcnt) {
case 4:
index = (readl(&emc->nferr[3]) & EMC_NFERR_INDEX_MASK) >>
EMC_NFERR_INDEX_BIT;
mask = (readl(&emc->nferr[3]) & EMC_NFERR_MASK_MASK) >>
EMC_NFERR_MASK_BIT;
jz_rs_correct(dat, index, mask);
case 3:
index = (readl(&emc->nferr[2]) & EMC_NFERR_INDEX_MASK) >>
EMC_NFERR_INDEX_BIT;
mask = (readl(&emc->nferr[2]) & EMC_NFERR_MASK_MASK) >>
EMC_NFERR_MASK_BIT;
jz_rs_correct(dat, index, mask);
case 2:
index = (readl(&emc->nferr[1]) & EMC_NFERR_INDEX_MASK) >>
EMC_NFERR_INDEX_BIT;
mask = (readl(&emc->nferr[1]) & EMC_NFERR_MASK_MASK) >>
EMC_NFERR_MASK_BIT;
jz_rs_correct(dat, index, mask);
case 1:
index = (readl(&emc->nferr[0]) & EMC_NFERR_INDEX_MASK) >>
EMC_NFERR_INDEX_BIT;
mask = (readl(&emc->nferr[0]) & EMC_NFERR_MASK_MASK) >>
EMC_NFERR_MASK_BIT;
jz_rs_correct(dat, index, mask);
default:
break;
}
return errcnt;
}
/*
* Main initialization routine
*/
int board_nand_init(struct nand_chip *nand)
{
uint32_t reg;
reg = readl(&emc->nfcsr);
reg |= EMC_NFCSR_NFE1; /* EMC setup, Set NFE bit */
writel(reg, &emc->nfcsr);
writel(EMC_SMCR1_OPT_NAND, &emc->smcr[1]);
nand->IO_ADDR_R = JZ_NAND_DATA_ADDR;
nand->IO_ADDR_W = JZ_NAND_DATA_ADDR;
nand->cmd_ctrl = jz_nand_cmd_ctrl;
nand->dev_ready = jz_nand_device_ready;
nand->ecc.hwctl = jz_nand_hwctl;
nand->ecc.correct = jz_nand_rs_correct_data;
nand->ecc.calculate = jz_nand_rs_calculate_ecc;
nand->ecc.mode = NAND_ECC_HW_OOB_FIRST;
nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
nand->ecc.layout = &qi_lb60_ecclayout_2gb;
nand->chip_delay = 50;
nand->options = NAND_USE_FLASH_BBT;
return 0;
}

211
include/configs/qi_lb60.h Normal file
View File

@ -0,0 +1,211 @@
/*
* Authors: Xiangfu Liu <xiangfu.z@gmail.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 3 of the License, or (at your option) any later version.
*/
#ifndef __CONFIG_QI_LB60_H
#define __CONFIG_QI_LB60_H
#define CONFIG_MIPS32 /* MIPS32 CPU core */
#define CONFIG_JZSOC /* Jz SoC */
#define CONFIG_JZ4740 /* Jz4740 SoC */
#define CONFIG_NAND_JZ4740
#define CONFIG_SYS_CPU_SPEED 336000000 /* CPU clock: 336 MHz */
#define CONFIG_SYS_EXTAL 12000000 /* EXTAL freq: 12 MHz */
#define CONFIG_SYS_HZ (CONFIG_SYS_EXTAL / 256) /* incrementer freq */
#define CONFIG_SYS_MIPS_TIMER_FREQ CONFIG_SYS_CPU_SPEED
#define CONFIG_SYS_UART_BASE JZ4740_UART0_BASE /* Base of the UART channel */
#define CONFIG_BAUDRATE 57600
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_SYS_NO_FLASH
#define CONFIG_SYS_FLASH_BASE 0 /* init flash_base as 0 */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAUL)
#define CONFIG_BOOTDELAY 0
#define CONFIG_BOOTARGS "mem=32M console=tty0 console=ttyS0,57600n8 ubi.mtd=2 rootfstype=ubifs root=ubi0:rootfs rw rootwait"
#define CONFIG_BOOTCOMMAND "nand read 0x80600000 0x400000 0x200000;bootm"
/*
* Command line configuration.
*/
#define CONFIG_CMD_BOOTD /* bootd */
#define CONFIG_CMD_CONSOLE /* coninfo */
#define CONFIG_CMD_ECHO /* echo arguments */
#define CONFIG_CMD_LOADB /* loadb */
#define CONFIG_CMD_LOADS /* loads */
#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */
#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/
#define CONFIG_CMD_RUN /* run command in env variable */
#define CONFIG_CMD_SAVEENV /* saveenv */
#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
#define CONFIG_CMD_SOURCE /* "source" command support */
#define CONFIG_CMD_NAND
/*
* Serial download configuration
*/
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_PROMPT "NanoNote# "
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024)
#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
#define CONFIG_SYS_LOAD_ADDR 0x80600000
#define CONFIG_SYS_MEMTEST_START 0x80100000
#define CONFIG_SYS_MEMTEST_END 0x80800000
/*
* Environment
*/
#define CONFIG_ENV_IS_IN_NAND /* use NAND for environment vars */
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
/*
* if board nand flash is 1GB, set to 1
* if board nand flash is 2GB, set to 2
* for change the PAGE_SIZE and BLOCK_SIZE
* will delete when there is no 1GB flash
*/
#define NANONOTE_NAND_SIZE 2
#define CONFIG_SYS_NAND_PAGE_SIZE (2048 * NANONOTE_NAND_SIZE)
#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * NANONOTE_NAND_SIZE << 10)
/* nand bad block was marked at this page in a block, start from 0 */
#define CONFIG_SYS_NAND_BADBLOCK_PAGE 127
#define CONFIG_SYS_NAND_PAGE_COUNT 128
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
/* ECC offset position in oob area, default value is 6 if it isn't defined */
#define CONFIG_SYS_NAND_ECC_POS (6 * NANONOTE_NAND_SIZE)
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 9
#define CONFIG_SYS_NAND_ECCSTEPS \
(CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE)
#define CONFIG_SYS_NAND_ECCTOTAL \
(CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS)
#define CONFIG_SYS_NAND_ECCPOS \
{12, 13, 14, 15, 16, 17, 18, 19,\
20, 21, 22, 23, 24, 25, 26, 27, \
28, 29, 30, 31, 32, 33, 34, 35, \
36, 37, 38, 39, 40, 41, 42, 43, \
44, 45, 46, 47, 48, 49, 50, 51, \
52, 53, 54, 55, 56, 57, 58, 59, \
60, 61, 62, 63, 64, 65, 66, 67, \
68, 69, 70, 71, 72, 73, 74, 75, \
76, 77, 78, 79, 80, 81, 82, 83}
#define CONFIG_SYS_NAND_OOBSIZE 128
#define CONFIG_SYS_NAND_BASE 0xB8000000
#define CONFIG_SYS_ONENAND_BASE CONFIG_SYS_NAND_BASE
#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl.*/
#define CONFIG_NAND_SPL_TEXT_BASE 0x80000000
/*
* IPL (Initial Program Loader, integrated inside CPU)
* Will load first 8k from NAND (SPL) into cache and execute it from there.
*
* SPL (Secondary Program Loader)
* Will load special U-Boot version (NUB) from NAND and execute it. This SPL
* has to fit into 8kByte. It sets up the CPU and configures the SDRAM
* controller and the NAND controller so that the special U-Boot image can be
* loaded from NAND to SDRAM.
*
* NUB (NAND U-Boot)
* This NAND U-Boot (NUB) is a special U-Boot version which can be started
* from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
*
*/
#define CONFIG_SYS_NAND_U_BOOT_DST 0x80100000 /* Load NUB to this addr */
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
/* Start NUB from this addr*/
/*
* Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
*/
#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) /* Offset to RAM U-Boot image */
#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) /* Size of RAM U-Boot image */
#define CONFIG_ENV_SIZE (4 << 10)
#define CONFIG_ENV_OFFSET \
(CONFIG_SYS_NAND_BLOCK_SIZE + CONFIG_SYS_NAND_U_BOOT_SIZE)
#define CONFIG_ENV_OFFSET_REDUND \
(CONFIG_ENV_OFFSET + CONFIG_SYS_NAND_BLOCK_SIZE)
#define CONFIG_SYS_TEXT_BASE 0x80100000
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
/*
* SDRAM Info.
*/
#define CONFIG_NR_DRAM_BANKS 1
/*
* Cache Configuration
*/
#define CONFIG_SYS_DCACHE_SIZE 16384
#define CONFIG_SYS_ICACHE_SIZE 16384
#define CONFIG_SYS_CACHELINE_SIZE 32
/*
* GPIO definition
*/
#define GPIO_LCD_CS (2 * 32 + 21)
#define GPIO_AMP_EN (3 * 32 + 4)
#define GPIO_SDPW_EN (3 * 32 + 2)
#define GPIO_SD_DETECT (3 * 32 + 0)
#define GPIO_BUZZ_PWM (3 * 32 + 27)
#define GPIO_USB_DETECT (3 * 32 + 28)
#define GPIO_AUDIO_POP (1 * 32 + 29)
#define GPIO_COB_TEST (1 * 32 + 30)
#define GPIO_KEYOUT_BASE (2 * 32 + 10)
#define GPIO_KEYIN_BASE (3 * 32 + 18)
#define GPIO_KEYIN_8 (3 * 32 + 26)
#define GPIO_SD_CD_N GPIO_SD_DETECT /* SD Card insert detect */
#define GPIO_SD_VCC_EN_N GPIO_SDPW_EN /* SD Card Power Enable */
#define SPEN GPIO_LCD_CS /* LCDCS :Serial command enable */
#define SPDA (2 * 32 + 22) /* LCDSCL:Serial command clock input */
#define SPCK (2 * 32 + 23) /* LCDSDA:Serial command data input */
/* SDRAM paramters */
#define SDRAM_BW16 1 /* Data bus width: 0-32bit, 1-16bit */
#define SDRAM_BANK4 1 /* Banks each chip: 0-2bank, 1-4bank */
#define SDRAM_ROW 13 /* Row address: 11 to 13 */
#define SDRAM_COL 9 /* Column address: 8 to 12 */
#define SDRAM_CASL 2 /* CAS latency: 2 or 3 */
/* SDRAM Timings, unit: ns */
#define SDRAM_TRAS 45 /* RAS# Active Time */
#define SDRAM_RCD 20 /* RAS# to CAS# Delay */
#define SDRAM_TPC 20 /* RAS# Precharge Time */
#define SDRAM_TRWL 7 /* Write Latency Time */
#define SDRAM_TREF 15625 /* Refresh period: 8192 cycles/64ms */
#endif