From d0bc51407cb1a10bdc0025fb58524c6d13658b83 Mon Sep 17 00:00:00 2001 From: Lijun Pan Date: Fri, 6 Jun 2014 15:13:58 -0500 Subject: [PATCH] powerpc/mpc85xx: Remove P1023 RDS support Since P1023RDS is no longer supported/manufactured by Freescale, we clean up P1023RDS related code. Since P1023RDB is still supported by Freescale, we keep P1023RDB releated code. Signed-off-by: Lijun Pan Reviewed-by: York Sun --- board/freescale/p1023rds/Makefile | 9 - board/freescale/p1023rds/README | 101 ------ board/freescale/p1023rds/bcsr.h | 49 --- board/freescale/p1023rds/law.c | 19 -- board/freescale/p1023rds/p1023rds.c | 191 ----------- board/freescale/p1023rds/tlb.c | 100 ------ boards.cfg | 1 - include/configs/P1023RDS.h | 479 ---------------------------- 8 files changed, 949 deletions(-) delete mode 100644 board/freescale/p1023rds/Makefile delete mode 100644 board/freescale/p1023rds/README delete mode 100644 board/freescale/p1023rds/bcsr.h delete mode 100644 board/freescale/p1023rds/law.c delete mode 100644 board/freescale/p1023rds/p1023rds.c delete mode 100644 board/freescale/p1023rds/tlb.c delete mode 100644 include/configs/P1023RDS.h diff --git a/board/freescale/p1023rds/Makefile b/board/freescale/p1023rds/Makefile deleted file mode 100644 index fdbf365ea5..0000000000 --- a/board/freescale/p1023rds/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Copyright 2010-2011 Freescale Semiconductor, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += p1023rds.o -obj-y += law.o -obj-y += tlb.o diff --git a/board/freescale/p1023rds/README b/board/freescale/p1023rds/README deleted file mode 100644 index d382551c4d..0000000000 --- a/board/freescale/p1023rds/README +++ /dev/null @@ -1,101 +0,0 @@ -Overview --------- -The P1023 process includes a performance optimized implementation of the -QorIQ data Path Acceleration Architecture (DPAA). This architecture -provides the infrastructure to support simplified sharing of networking -interfaces and accelerators by multiple CPU cores. P1023 is an e500 based -dual core SOC. - -P1023RDS board is a Low End Dual core platform supporting the P1023 -processor of QorIQ series. - -Building U-boot ---------------- -To build the u-boot for P1023RDS: -Configure to NOR boot: - make P1023RDS_config -Configure to NAND boot: - make P1023RDS_NAND_config -Build: - make - -Board Switches --------------- -Most switches on the board should not be changed. The most frequent -user-settable switches on the board are used to configure -the flash banks. - -J4: all open - -Default NOR flash boot switch setting: - Sw3[1:8]: off on on off on on off off - Sw4[1:8]: off off off on off off off off - Sw6[1:8]: off on off on off on on off - Sw7[1:8]: off on off off on off off off - Sw8[1:8]: on off off off off off off off - -For NAND flash boot,set -Sw4[1:4]: off on on on - -The default native ethernet setting is for RGMII mode. -To use SGMII mode, set -SW8[1:2]: OFF OFF -SW7[6:7]: ON ON - -Memory Map ----------- -0x0000_0000 0x7fff_ffff DDR 2G Cacheable -0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable -0xc000_0000 0xdfff_ffff PCI 512M non-cacheable -0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable - -0xe000_0000 0xe003_ffff BCSR 256K BCSR -0xee00_0000 0xefff_ffff NOR flash 32M NOR flash -0xff00_0000 0xff3f_ffff DPAA_QBMAN 4M -0xff60_0000 0xff7f_ffff CCSR 2M non-cacheable -0xffa0_0000 0xffaf_ffff NAND FLASH 1M non-cacheable -0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 - -Flashing u-boot Images ---------------- -To program the image in the boot flash bank: -NOR flash boot: - => tftp 1000000 u-boot.bin - => protect off all - => erase eff40000 efffffff - => cp.b 1000000 eff40000 c0000 - -NAND flash boot: - => tftp 1000000 u-boot-nand.bin - => nand erase 0 80000 - => nand write 1000000 0 80000 - -Firmware ucode location ---------------------------------- -Microcode(ucode) to FMAN's IRAM is needed to make FMAN Ethernet work. -u-boot loads ucode FLASH. The location for ucode: -NOR Flash: 0xfe000000 -NAND Flash: 0x1f00000 - -Using the Device Tree Source File ---------------------------------- -To create the DTB (Device Tree Binary) image file, -use a command similar to this: - - dtc -b 0 -f -I dts -O dtb p1023rds.dts > p1023rds.dtb - -Likely, that .dts file will come from here; - - linux-2.6/arch/powerpc/boot/dts/p1023rds.dts -or - make p1023rds.dtb ARCH=powerpc -in linux-2.6 directory. - -Booting Linux -------------- -Place a linux uImage in the TFTP disk area. - - tftp 1000000 uImage - tftp 2000000 rootfs.ext2.gz.uboot - tftp c00000 p1023rds.dtb - bootm 1000000 2000000 c00000 diff --git a/board/freescale/p1023rds/bcsr.h b/board/freescale/p1023rds/bcsr.h deleted file mode 100644 index a9deb72f78..0000000000 --- a/board/freescale/p1023rds/bcsr.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. - * - * Authors: Chunhe Lan - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __BCSR_H_ -#define __BCSR_H_ - -#include - -/* - * BCSR Bit definitions - * BCSR 15 * - 0 device insertion oriention - 1 stack processor present - 2 power supply shut down/normal operation - 3 I2C bus0 drive enable - 4 reserved - 5:7 I2C bus0 select - 5 - I2C_BUS_0_SS0 - 6 - I2C_BUS_0_SS1 - 7 - I2C_BUS_0_SS2 -*/ - -/* BCSR register base address is 0xFX000020 */ -#define BCSR_BASE_REG_OFFSET 0x20 -#define BCSR_ACCESS_REG_ADDR (CONFIG_SYS_BCSR_BASE + BCSR_BASE_REG_OFFSET) - -#define BCSR15_DEV_INS_ORI 0x80 -#define BCSR15_STACK_PRO_PRE 0x40 -#define BCSR15_POWER_SUPPLY 0x20 -#define BCSR15_I2C_BUS0_EN 0x10 -#define BCSR15_I2C_BUS0_SEG0 0x00 -#define BCSR15_I2C_BUS0_SEG1 0x04 -#define BCSR15_I2C_BUS0_SEG2 0x02 -#define BCSR15_I2C_BUS0_SEG3 0x06 -#define BCSR15_I2C_BUS0_SEG4 0x01 -#define BCSR15_I2C_BUS0_SEG5 0x05 -#define BCSR15_I2C_BUS0_SEG6 0x03 -#define BCSR15_I2C_BUS0_SEG7 0x07 -#define BCSR15_I2C_BUS0_SEG_CLR 0x07 -#define BCSR19_SGMII_SEL_L 0x01 - -/*BCSR Utils functions*/ -void fixup_i2c_bus0_sel_seg0(void); -#endif /* __BCSR_H_ */ diff --git a/board/freescale/p1023rds/law.c b/board/freescale/p1023rds/law.c deleted file mode 100644 index 92f5a3fcb5..0000000000 --- a/board/freescale/p1023rds/law.c +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright 2010-2011 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_4M, - LAW_TRGT_IF_DPAA_SWP_SRAM), - /* The LAW 0xe0000000 ~ 0xefffffff for BCSR and NOR flash */ - SET_LAW(CONFIG_SYS_BCSR_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/p1023rds/p1023rds.c b/board/freescale/p1023rds/p1023rds.c deleted file mode 100644 index 2b883c719e..0000000000 --- a/board/freescale/p1023rds/p1023rds.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - * Copyright 2010-2012 Freescale Semiconductor, Inc. - * - * Authors: Roy Zang - * Chunhe Lan - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "bcsr.h" - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - fsl_lbc_t *lbc = LBC_BASE_ADDR; - - /* Set ABSWP to implement conversion of addresses in the LBC */ - setbits_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR); - - return 0; -} - -int checkboard(void) -{ - u8 *bcsr = (u8 *)BCSR_ACCESS_REG_ADDR; - - printf("Board: P1023 RDS\n"); - - clrbits_8(&bcsr[15], BCSR15_I2C_BUS0_SEG_CLR); - setbits_8(&bcsr[15], BCSR15_I2C_BUS0_SEG0); - - return 0; -} - -/* Fixed sdram init -- doesn't use serial presence detect. */ -phys_size_t fixed_sdram(void) -{ -#ifndef CONFIG_SYS_RAMBOOT - struct ccsr_ddr __iomem *ddr = - (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; - - set_next_law(0, LAW_SIZE_2G, LAW_TRGT_IF_DDR_1); - - out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS); - out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG); - out_be32(&ddr->cs1_bnds, CONFIG_SYS_DDR_CS1_BNDS); - out_be32(&ddr->cs1_config, CONFIG_SYS_DDR_CS1_CONFIG); - out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3); - out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0); - out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1); - out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2); - out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_CONTROL2); - out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_MODE_1); - out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_MODE_2); - out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_INTERVAL); - out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT); - out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CTRL); - out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4); - out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5); - out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CNTL); - out_be32(&ddr->ddr_wrlvl_cntl, CONFIG_SYS_DDR_WRLVL_CNTL); - out_be32(&ddr->ddr_cdr1, CONFIG_SYS_DDR_CDR_1); - out_be32(&ddr->ddr_cdr2, CONFIG_SYS_DDR_CDR_2); - out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL); -#endif - return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024ul; -} - -#ifdef CONFIG_PCI -void pci_init_board(void) -{ - fsl_pcie_init_board(0); -} -#endif - -int board_early_init_r(void) -{ - const unsigned int flashbase = CONFIG_SYS_BCSR_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); - - /* - * Remap Boot flash + BCSR region to caching-inhibited - * so that flash can be erased properly. - */ - - /* Flush d-cache and invalidate i-cache of any FLASH data */ - flush_dcache(); - invalidate_icache(); - - /* invalidate existing TLB entry for flash + bcsr */ - disable_tlb(flash_esel); - - set_tlb(1, flashbase, CONFIG_SYS_BCSR_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, flash_esel, BOOKE_PAGESZ_256M, 1); - - setup_portals(); - - return 0; -} - -unsigned long get_board_sys_clk(ulong dummy) -{ - return gd->bus_clk; -} - -unsigned long get_board_ddr_clk(ulong dummy) -{ - return gd->mem_clk; -} - -int board_eth_init(bd_t *bis) -{ - u8 *bcsr = (u8 *)BCSR_ACCESS_REG_ADDR; - ccsr_gur_t *gur = (ccsr_gur_t *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - struct fsl_pq_mdio_info dtsec_mdio_info; - - /* - * Need to set dTSEC 1 pin multiplexing to TSEC. The default setting - * is not correct. - */ - setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_TSEC1_1); - - dtsec_mdio_info.regs = - (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR; - dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; - - /* Register the 1G MDIO bus */ - fsl_pq_mdio_init(bis, &dtsec_mdio_info); - - fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR); - - fm_info_set_mdio(FM1_DTSEC1, - miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME)); - fm_info_set_mdio(FM1_DTSEC2, - miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME)); - - /* Make SERDES connected to SGMII by cleaing bcsr19[7] */ - if (fm_info_get_enet_if(FM1_DTSEC1) == PHY_INTERFACE_MODE_SGMII) - clrbits_8(&bcsr[19], BCSR19_SGMII_SEL_L); - -#ifdef CONFIG_FMAN_ENET - cpu_eth_init(bis); -#endif - - return pci_eth_init(bis); -} - -#if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ - phys_addr_t base; - phys_size_t size; - - ft_cpu_setup(blob, bd); - - base = getenv_bootm_low(); - size = getenv_bootm_size(); - - fdt_fixup_memory(blob, (u64)base, (u64)size); - -#ifdef CONFIG_HAS_FSL_DR_USB - fdt_fixup_dr_usb(blob, bd); -#endif - - fdt_fixup_fman_ethernet(blob); -} -#endif diff --git a/board/freescale/p1023rds/tlb.c b/board/freescale/p1023rds/tlb.c deleted file mode 100644 index 3c92c14ae3..0000000000 --- a/board/freescale/p1023rds/tlb.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * Copyright 2010-2011 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* TLB 1 */ - /* *I*** - Covers boot page */ - SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I, - 0, 0, BOOKE_PAGESZ_4K, 1), - - /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_4M, 1), - - /* *W*G* - BCSR and NOR flash on local bus*/ - /* This will be changed to *I*G* after relocation to RAM. */ - SET_TLB_ENTRY(1, CONFIG_SYS_BCSR_BASE, CONFIG_SYS_BCSR_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G, - 0, 2, BOOKE_PAGESZ_256M, 1), - - /* *I*G* - PCI */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_1G, 1), - - /* *I*G* - PCI */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x40000000, - CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_256M, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x50000000, - CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_256M, 1), - - /* *I*G* - PCI I/O */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_VIRT, CONFIG_SYS_PCIE3_IO_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 6, BOOKE_PAGESZ_256K, 1), - - /* Bman/Qman */ - SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 7, BOOKE_PAGESZ_1M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x00100000, - CONFIG_SYS_BMAN_MEM_PHYS + 0x00100000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 8, BOOKE_PAGESZ_1M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, - 0, 9, BOOKE_PAGESZ_1M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x00100000, - CONFIG_SYS_QMAN_MEM_PHYS + 0x00100000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 10, BOOKE_PAGESZ_1M, 1), - - /* *I*G - NAND */ - SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 11, BOOKE_PAGESZ_1M, 1), - -#ifdef CONFIG_SYS_RAMBOOT - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, - CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 12, BOOKE_PAGESZ_1G, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, - CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 13, BOOKE_PAGESZ_1G, 1), -#endif -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/boards.cfg b/boards.cfg index 4b2bc19a95..110dd9d9aa 100644 --- a/boards.cfg +++ b/boards.cfg @@ -830,7 +830,6 @@ Active powerpc mpc85xx - freescale p1022ds Active powerpc mpc85xx - freescale p1022ds P1022DS_SDCARD P1022DS:SDCARD Timur Tabi Active powerpc mpc85xx - freescale p1022ds P1022DS_SPIFLASH P1022DS:SPIFLASH Timur Tabi Active powerpc mpc85xx - freescale p1023rdb P1023RDB - - -Active powerpc mpc85xx - freescale p1023rds P1023RDS - Roy Zang Active powerpc mpc85xx - freescale p1_p2_rdb P1011RDB P1_P2_RDB:P1011RDB - Active powerpc mpc85xx - freescale p1_p2_rdb P1011RDB_36BIT P1_P2_RDB:P1011RDB,36BIT - Active powerpc mpc85xx - freescale p1_p2_rdb P1011RDB_36BIT_SDCARD P1_P2_RDB:P1011RDB,36BIT,SDCARD - diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h deleted file mode 100644 index ac75b9c5fb..0000000000 --- a/include/configs/P1023RDS.h +++ /dev/null @@ -1,479 +0,0 @@ -/* - * Copyright 2010-2012 Freescale Semiconductor, Inc. - * - * Authors: Roy Zang - * Chunhe Lan - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * p1023rds board configuration file - * - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff40000 -#endif - -#ifndef CONFIG_SYS_MONITOR_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif - -#ifndef CONFIG_RESET_VECTOR_ADDRESS -#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc -#endif - -/* High Level Configuration Options */ -#define CONFIG_BOOKE /* BOOKE */ -#define CONFIG_E500 /* BOOKE e500 family */ -#define CONFIG_P1023 -#define CONFIG_P1023RDS -#define CONFIG_MP /* support multiple processors */ - -#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ -#define CONFIG_PCI /* Enable PCI/PCIE */ -#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ -#define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ -#define CONFIG_PCIE3 /* PCIE controler 3 (slot 3) */ -#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ -#define CONFIG_FSL_LAW /* Use common FSL init code */ - -#ifndef __ASSEMBLY__ -extern unsigned long get_clock_freq(void); -#endif - -#define CONFIG_SYS_CLK_FREQ 66666666 -#define CONFIG_DDR_CLK_FREQ CONFIG_SYS_CLK_FREQ - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_HWCONFIG - -#define CONFIG_ENABLE_36BIT_PHYS - -#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x1fffffff /* fix me, only 1G */ -#define CONFIG_PANIC_HANG /* do not reset board on panic */ - -#define CONFIG_SYS_LBC_LBCR 0x00000000 /* Implement conversion of - addresses in the LBC */ - -/* DDR Setup */ -#define CONFIG_VERY_BIG_RAM - -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 2 - -/* These are used when DDR doesn't use SPD. */ -#define CONFIG_SYS_SDRAM_SIZE 2048u /* DDR is 2GB */ - -/* Default settings for "stable" mode */ -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F -#define CONFIG_SYS_DDR_CS1_BNDS 0x0040007F -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302 -#define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302 -#define CONFIG_SYS_DDR_TIMING_3 0x00020000 -#define CONFIG_SYS_DDR_TIMING_0 0x40110104 -#define CONFIG_SYS_DDR_TIMING_1 0x5C59E544 -#define CONFIG_SYS_DDR_TIMING_2 0x0fA888CA -#define CONFIG_SYS_DDR_MODE_1 0x00441210 -#define CONFIG_SYS_DDR_MODE_2 0x00000000 -#define CONFIG_SYS_DDR_MODE_CTRL 0x00000000 -#define CONFIG_SYS_DDR_INTERVAL 0x0A280100 -#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef -#define CONFIG_SYS_DDR_CLK_CTRL 0x01800000 -#define CONFIG_SYS_DDR_TIMING_4 0x00000001 -#define CONFIG_SYS_DDR_TIMING_5 0x01401400 -#define CONFIG_SYS_DDR_ZQ_CNTL 0x89080600 -#define CONFIG_SYS_DDR_WRLVL_CNTL 0x8675F605 -#define CONFIG_SYS_DDR_CONTROL 0xC70C0008 /* Type = DDR3: No Interleaving */ -#define CONFIG_SYS_DDR_CONTROL2 0x24401010 -#define CONFIG_SYS_DDR_CDR1 0x00000000 -#define CONFIG_SYS_DDR_CDR2 0x00000000 - -#define CONFIG_SYS_DDR_ERR_INT_EN 0x00000000 -#define CONFIG_SYS_DDR_ERR_DIS 0x00000000 -#define CONFIG_SYS_DDR_SBE 0x00000000 - -/* Settings that differ for "performance" mode */ -#define CONFIG_SYS_DDR_CS0_BNDS_PERF 0x0000007F /* Interleaving Enabled */ -#define CONFIG_SYS_DDR_CS1_BNDS_PERF 0x00000000 /* Interleaving Enabled */ -#define CONFIG_SYS_DDR_CS1_CONFIG_PERF 0x80014302 -#define CONFIG_SYS_DDR_TIMING_1_PERF 0x5C58E544 -#define CONFIG_SYS_DDR_TIMING_2_PERF 0x0FA888CA -/* Type = DDR3: cs0-cs1 interleaving */ -#define CONFIG_SYS_DDR_CONTROL_PERF 0xC70C4008 -#define CONFIG_SYS_DDR_CDR_1 0x00000000 -#define CONFIG_SYS_DDR_CDR_2 0x00000000 - - -/* - * Memory map - * - * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable - * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable - * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable - * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable - * - * Localbus non-cacheable - * 0xe000_0000 0xe003_ffff BCSR 256K BCSR - * 0xee00_0000 0xefff_ffff NOR flash 32M NOR flash - * 0xff00_0000 0xff3f_ffff DPAA_QBMAN 4M - * 0xff60_0000 0xff7f_ffff CCSR 2M non-cacheable - * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable - * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 - */ - -/* - * Local Bus Definitions - */ -#define CONFIG_SYS_BCSR_BASE 0xe0000000 /* start of on board FPGA */ -#define CONFIG_SYS_BCSR_BASE_PHYS CONFIG_SYS_BCSR_BASE - -#define CONFIG_SYS_FLASH_BASE 0xee000000 /* start of FLASH 32M */ - -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE - -#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ - | BR_PS_16 | BR_V) -#define CONFIG_FLASH_OR_PRELIM 0xfe000ff7 - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_EMPTY_INFO - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#if defined(CONFIG_SYS_SPL) -#define CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f function */ -#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ - -#define CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_END - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (768 * 1024) -#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) /* Reserved for malloc */ - -#ifndef CONFIG_NAND_SPL -#define CONFIG_SYS_NAND_BASE 0xffa00000 -#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE -#else -#define CONFIG_SYS_NAND_BASE 0xfff00000 -#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE -#endif - -#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_CMD_NAND -#define CONFIG_NAND_FSL_ELBC -#define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) - -/* NAND boot: 4K NAND loader config */ -#define CONFIG_SYS_NAND_SPL_SIZE 0x1000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) + CONFIG_SYS_NAND_SPL_SIZE) -#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000 - CONFIG_SYS_NAND_SPL_SIZE) -#define CONFIG_SYS_NAND_U_BOOT_START 0x11000000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (0) -#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000 -#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000) - -/* NAND flash config */ -#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ - | (2< - -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_PING -#define CONFIG_CMD_MII -#define CONFIG_CMD_ELF -#define CONFIG_CMD_SETEXPR -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#define CONFIG_CMD_NET -#endif - -/* - * USB - */ -#define CONFIG_HAS_FSL_DR_USB -#ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI - -#ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_USB_EHCI_FSL -#define CONFIG_USB_STORAGE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION -#endif -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* - * Environment Configuration - */ -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_UBOOTPATH (u-boot.bin) /* U-Boot image on TFTP server */ - -/* default location for tftp and bootm */ -#define CONFIG_LOADADDR 1000000 - -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ - -#define CONFIG_BAUDRATE 115200 - -/* Qman/Bman */ -#define CONFIG_SYS_DPAA_QBMAN /* support Q/Bman */ -#define CONFIG_SYS_QMAN_MEM_BASE 0xff000000 -#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE -#define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 -#define CONFIG_SYS_BMAN_MEM_BASE 0xff200000 -#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE -#define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 - -/* For FM */ -#define CONFIG_SYS_DPAA_FMAN -#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ - -#ifdef CONFIG_SYS_DPAA_FMAN -#define CONFIG_FMAN_ENET -#define CONFIG_PHY_MARVELL -#endif - -/* Default address of microcode for the Linux Fman driver */ -/* QE microcode/firmware address */ -#define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 -#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 -#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) - -#ifdef CONFIG_FMAN_ENET -#define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x2 -#define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x7 - -#define CONFIG_SYS_TBIPA_VALUE 8 -#define CONFIG_MII /* MII PHY management */ -#define CONFIG_ETHPRIME "FM1@DTSEC1" -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" - -#endif /* __CONFIG_H */