spi: Zap lpc32xx_ssp driver-related code
lpc32xx_ssp driver is deprecated, no active updates and no board user, hence dropped the same. Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Albert ARIBAUD <albert.aribaud@3adev.fr> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
This commit is contained in:
Jagan Teki
parent
c5c657644b
commit
d0847ecc9f
@ -431,12 +431,6 @@ config KIRKWOOD_SPI
|
||||
Enable support for SPI on various Marvell SoCs, such as
|
||||
Kirkwood and Armada 375.
|
||||
|
||||
config LPC32XX_SSP
|
||||
bool "LPC32XX SPI Driver"
|
||||
depends on DEPRECATED
|
||||
help
|
||||
Enable support for SPI on LPC32xx
|
||||
|
||||
config MXC_SPI
|
||||
bool "MXC SPI Driver"
|
||||
help
|
||||
|
||||
@ -33,7 +33,6 @@ obj-$(CONFIG_FSL_ESPI) += fsl_espi.o
|
||||
obj-$(CONFIG_FSL_QSPI) += fsl_qspi.o
|
||||
obj-$(CONFIG_ICH_SPI) += ich.o
|
||||
obj-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
|
||||
obj-$(CONFIG_LPC32XX_SSP) += lpc32xx_ssp.o
|
||||
obj-$(CONFIG_MESON_SPIFC) += meson_spifc.o
|
||||
obj-$(CONFIG_MPC8XX_SPI) += mpc8xx_spi.o
|
||||
obj-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
|
||||
|
||||
@ -1,134 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* LPC32xx SSP interface (SPI mode)
|
||||
*
|
||||
* (C) Copyright 2014 DENX Software Engineering GmbH
|
||||
* Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <linux/compat.h>
|
||||
#include <asm/io.h>
|
||||
#include <malloc.h>
|
||||
#include <spi.h>
|
||||
#include <asm/arch/clk.h>
|
||||
|
||||
/* SSP chip registers */
|
||||
struct ssp_regs {
|
||||
u32 cr0;
|
||||
u32 cr1;
|
||||
u32 data;
|
||||
u32 sr;
|
||||
u32 cpsr;
|
||||
u32 imsc;
|
||||
u32 ris;
|
||||
u32 mis;
|
||||
u32 icr;
|
||||
u32 dmacr;
|
||||
};
|
||||
|
||||
/* CR1 register defines */
|
||||
#define SSP_CR1_SSP_ENABLE 0x0002
|
||||
|
||||
/* SR register defines */
|
||||
#define SSP_SR_TNF 0x0002
|
||||
/* SSP status RX FIFO not empty bit */
|
||||
#define SSP_SR_RNE 0x0004
|
||||
|
||||
/* lpc32xx spi slave */
|
||||
struct lpc32xx_spi_slave {
|
||||
struct spi_slave slave;
|
||||
struct ssp_regs *regs;
|
||||
};
|
||||
|
||||
static inline struct lpc32xx_spi_slave *to_lpc32xx_spi_slave(
|
||||
struct spi_slave *slave)
|
||||
{
|
||||
return container_of(slave, struct lpc32xx_spi_slave, slave);
|
||||
}
|
||||
|
||||
/* the following is called in sequence by do_spi_xfer() */
|
||||
|
||||
struct spi_slave *spi_setup_slave(uint bus, uint cs, uint max_hz, uint mode)
|
||||
{
|
||||
struct lpc32xx_spi_slave *lslave;
|
||||
|
||||
/* we only set up SSP0 for now, so ignore bus */
|
||||
|
||||
if (mode & SPI_3WIRE) {
|
||||
pr_err("3-wire mode not supported");
|
||||
return NULL;
|
||||
}
|
||||
|
||||
if (mode & SPI_SLAVE) {
|
||||
pr_err("slave mode not supported\n");
|
||||
return NULL;
|
||||
}
|
||||
|
||||
if (mode & SPI_PREAMBLE) {
|
||||
pr_err("preamble byte skipping not supported\n");
|
||||
return NULL;
|
||||
}
|
||||
|
||||
lslave = spi_alloc_slave(struct lpc32xx_spi_slave, bus, cs);
|
||||
if (!lslave) {
|
||||
printf("SPI_error: Fail to allocate lpc32xx_spi_slave\n");
|
||||
return NULL;
|
||||
}
|
||||
|
||||
lslave->regs = (struct ssp_regs *)SSP0_BASE;
|
||||
|
||||
/*
|
||||
* 8 bit frame, SPI fmt, 500kbps -> clock divider is 26.
|
||||
* Set SCR to 0 and CPSDVSR to 26.
|
||||
*/
|
||||
|
||||
writel(0x7, &lslave->regs->cr0); /* 8-bit chunks, SPI, 1 clk/bit */
|
||||
writel(26, &lslave->regs->cpsr); /* SSP clock = HCLK/26 = 500kbps */
|
||||
writel(0, &lslave->regs->imsc); /* do not raise any interrupts */
|
||||
writel(0, &lslave->regs->icr); /* clear any pending interrupt */
|
||||
writel(0, &lslave->regs->dmacr); /* do not do DMAs */
|
||||
writel(SSP_CR1_SSP_ENABLE, &lslave->regs->cr1); /* enable SSP0 */
|
||||
return &lslave->slave;
|
||||
}
|
||||
|
||||
void spi_free_slave(struct spi_slave *slave)
|
||||
{
|
||||
struct lpc32xx_spi_slave *lslave = to_lpc32xx_spi_slave(slave);
|
||||
|
||||
debug("(lpc32xx) spi_free_slave: 0x%08x\n", (u32)lslave);
|
||||
free(lslave);
|
||||
}
|
||||
|
||||
int spi_claim_bus(struct spi_slave *slave)
|
||||
{
|
||||
/* only one bus and slave so far, always available */
|
||||
return 0;
|
||||
}
|
||||
|
||||
int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
|
||||
const void *dout, void *din, unsigned long flags)
|
||||
{
|
||||
struct lpc32xx_spi_slave *lslave = to_lpc32xx_spi_slave(slave);
|
||||
int bytelen = bitlen >> 3;
|
||||
int idx_out = 0;
|
||||
int idx_in = 0;
|
||||
int start_time;
|
||||
|
||||
start_time = get_timer(0);
|
||||
while ((idx_out < bytelen) || (idx_in < bytelen)) {
|
||||
int status = readl(&lslave->regs->sr);
|
||||
if ((idx_out < bytelen) && (status & SSP_SR_TNF))
|
||||
writel(((u8 *)dout)[idx_out++], &lslave->regs->data);
|
||||
if ((idx_in < bytelen) && (status & SSP_SR_RNE))
|
||||
((u8 *)din)[idx_in++] = readl(&lslave->regs->data);
|
||||
if (get_timer(start_time) >= CONFIG_LPC32XX_SSP_TIMEOUT)
|
||||
return -1;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
void spi_release_bus(struct spi_slave *slave)
|
||||
{
|
||||
/* do nothing */
|
||||
}
|
||||
@ -54,11 +54,6 @@
|
||||
*/
|
||||
#define CONFIG_LPC32XX_GPIO
|
||||
|
||||
/*
|
||||
* SSP/SPI
|
||||
*/
|
||||
#define CONFIG_LPC32XX_SSP_TIMEOUT 100000
|
||||
|
||||
/*
|
||||
* Ethernet
|
||||
*/
|
||||
|
||||
@ -104,11 +104,6 @@
|
||||
|
||||
#define CONFIG_LPC32XX_GPIO
|
||||
|
||||
/*
|
||||
* SSP/SPI/DISPLAY
|
||||
*/
|
||||
|
||||
#define CONFIG_LPC32XX_SSP_TIMEOUT 100000
|
||||
/*
|
||||
* Environment
|
||||
*/
|
||||
|
||||
@ -1034,7 +1034,6 @@ CONFIG_LPC32XX_NAND_SLC_WDR_CLKS
|
||||
CONFIG_LPC32XX_NAND_SLC_WHOLD
|
||||
CONFIG_LPC32XX_NAND_SLC_WSETUP
|
||||
CONFIG_LPC32XX_NAND_SLC_WWIDTH
|
||||
CONFIG_LPC32XX_SSP_TIMEOUT
|
||||
CONFIG_LPC_BASE
|
||||
CONFIG_LPC_IO_BASE
|
||||
CONFIG_LPUART
|
||||
|
||||
Loading…
Reference in New Issue
Block a user