net: add altera triple speeds ethernet mac driver
This driver supports the Altera triple speeds 10/100/1000 ethernet mac. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
This commit is contained in:
parent
f6569884b4
commit
c960b13ed2
@ -27,6 +27,7 @@ LIB := $(obj)libnet.a
|
||||
|
||||
COBJS-$(CONFIG_DRIVER_3C589) += 3c589.o
|
||||
COBJS-$(CONFIG_PPC4xx_EMAC) += 4xx_enet.o
|
||||
COBJS-$(CONFIG_ALTERA_TSE) += altera_tse.o
|
||||
COBJS-$(CONFIG_DRIVER_AT91EMAC) += at91_emac.o
|
||||
COBJS-$(CONFIG_DRIVER_AX88180) += ax88180.o
|
||||
COBJS-$(CONFIG_BCM570x) += bcm570x.o bcm570x_autoneg.o 5701rls.o
|
||||
|
935
drivers/net/altera_tse.c
Normal file
935
drivers/net/altera_tse.c
Normal file
@ -0,0 +1,935 @@
|
||||
/*
|
||||
* Altera 10/100/1000 triple speed ethernet mac driver
|
||||
*
|
||||
* Copyright (C) 2008 Altera Corporation.
|
||||
* Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
#include <config.h>
|
||||
#include <common.h>
|
||||
#include <malloc.h>
|
||||
#include <net.h>
|
||||
#include <command.h>
|
||||
#include <asm/cache.h>
|
||||
#include <asm/dma-mapping.h>
|
||||
#include <miiphy.h>
|
||||
#include "altera_tse.h"
|
||||
|
||||
/* sgdma debug - print descriptor */
|
||||
static void alt_sgdma_print_desc(volatile struct alt_sgdma_descriptor *desc)
|
||||
{
|
||||
debug("SGDMA DEBUG :\n");
|
||||
debug("desc->source : 0x%x \n", (unsigned int)desc->source);
|
||||
debug("desc->destination : 0x%x \n", (unsigned int)desc->destination);
|
||||
debug("desc->next : 0x%x \n", (unsigned int)desc->next);
|
||||
debug("desc->source_pad : 0x%x \n", (unsigned int)desc->source_pad);
|
||||
debug("desc->destination_pad : 0x%x \n",
|
||||
(unsigned int)desc->destination_pad);
|
||||
debug("desc->next_pad : 0x%x \n", (unsigned int)desc->next_pad);
|
||||
debug("desc->bytes_to_transfer : 0x%x \n",
|
||||
(unsigned int)desc->bytes_to_transfer);
|
||||
debug("desc->actual_bytes_transferred : 0x%x \n",
|
||||
(unsigned int)desc->actual_bytes_transferred);
|
||||
debug("desc->descriptor_status : 0x%x \n",
|
||||
(unsigned int)desc->descriptor_status);
|
||||
debug("desc->descriptor_control : 0x%x \n",
|
||||
(unsigned int)desc->descriptor_control);
|
||||
}
|
||||
|
||||
/* This is a generic routine that the SGDMA mode-specific routines
|
||||
* call to populate a descriptor.
|
||||
* arg1 :pointer to first SGDMA descriptor.
|
||||
* arg2 :pointer to next SGDMA descriptor.
|
||||
* arg3 :Address to where data to be written.
|
||||
* arg4 :Address from where data to be read.
|
||||
* arg5 :no of byte to transaction.
|
||||
* arg6 :variable indicating to generate start of packet or not
|
||||
* arg7 :read fixed
|
||||
* arg8 :write fixed
|
||||
* arg9 :read burst
|
||||
* arg10 :write burst
|
||||
* arg11 :atlantic_channel number
|
||||
*/
|
||||
static void alt_sgdma_construct_descriptor_burst(
|
||||
volatile struct alt_sgdma_descriptor *desc,
|
||||
volatile struct alt_sgdma_descriptor *next,
|
||||
unsigned int *read_addr,
|
||||
unsigned int *write_addr,
|
||||
unsigned short length_or_eop,
|
||||
int generate_eop,
|
||||
int read_fixed,
|
||||
int write_fixed_or_sop,
|
||||
int read_burst,
|
||||
int write_burst,
|
||||
unsigned char atlantic_channel)
|
||||
{
|
||||
/*
|
||||
* Mark the "next" descriptor as "not" owned by hardware. This prevents
|
||||
* The SGDMA controller from continuing to process the chain. This is
|
||||
* done as a single IO write to bypass cache, without flushing
|
||||
* the entire descriptor, since only the 8-bit descriptor status must
|
||||
* be flushed.
|
||||
*/
|
||||
if (!next)
|
||||
debug("Next descriptor not defined!!\n");
|
||||
|
||||
next->descriptor_control = (next->descriptor_control &
|
||||
~ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK);
|
||||
|
||||
desc->source = (unsigned int *)((unsigned int)read_addr & 0x1FFFFFFF);
|
||||
desc->destination =
|
||||
(unsigned int *)((unsigned int)write_addr & 0x1FFFFFFF);
|
||||
desc->next = (unsigned int *)((unsigned int)next & 0x1FFFFFFF);
|
||||
desc->source_pad = 0x0;
|
||||
desc->destination_pad = 0x0;
|
||||
desc->next_pad = 0x0;
|
||||
desc->bytes_to_transfer = length_or_eop;
|
||||
desc->actual_bytes_transferred = 0;
|
||||
desc->descriptor_status = 0x0;
|
||||
|
||||
/* SGDMA burst not currently supported */
|
||||
desc->read_burst = 0;
|
||||
desc->write_burst = 0;
|
||||
|
||||
/*
|
||||
* Set the descriptor control block as follows:
|
||||
* - Set "owned by hardware" bit
|
||||
* - Optionally set "generate EOP" bit
|
||||
* - Optionally set the "read from fixed address" bit
|
||||
* - Optionally set the "write to fixed address bit (which serves
|
||||
* serves as a "generate SOP" control bit in memory-to-stream mode).
|
||||
* - Set the 4-bit atlantic channel, if specified
|
||||
*
|
||||
* Note this step is performed after all other descriptor information
|
||||
* has been filled out so that, if the controller already happens to be
|
||||
* pointing at this descriptor, it will not run (via the "owned by
|
||||
* hardware" bit) until all other descriptor has been set up.
|
||||
*/
|
||||
|
||||
desc->descriptor_control =
|
||||
((ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK) |
|
||||
(generate_eop ?
|
||||
ALT_SGDMA_DESCRIPTOR_CONTROL_GENERATE_EOP_MSK : 0x0) |
|
||||
(read_fixed ?
|
||||
ALT_SGDMA_DESCRIPTOR_CONTROL_READ_FIXED_ADDRESS_MSK : 0x0) |
|
||||
(write_fixed_or_sop ?
|
||||
ALT_SGDMA_DESCRIPTOR_CONTROL_WRITE_FIXED_ADDRESS_MSK : 0x0) |
|
||||
(atlantic_channel ? ((atlantic_channel & 0x0F) << 3) : 0)
|
||||
);
|
||||
}
|
||||
|
||||
static int alt_sgdma_do_sync_transfer(volatile struct alt_sgdma_registers *dev,
|
||||
volatile struct alt_sgdma_descriptor *desc)
|
||||
{
|
||||
unsigned int status;
|
||||
int counter = 0;
|
||||
|
||||
/* Wait for any pending transfers to complete */
|
||||
alt_sgdma_print_desc(desc);
|
||||
status = dev->status;
|
||||
|
||||
counter = 0;
|
||||
while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK) {
|
||||
if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
|
||||
break;
|
||||
}
|
||||
|
||||
if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
|
||||
debug("Timeout waiting sgdma in do sync!\n");
|
||||
|
||||
/*
|
||||
* Clear any (previous) status register information
|
||||
* that might occlude our error checking later.
|
||||
*/
|
||||
dev->status = 0xFF;
|
||||
|
||||
/* Point the controller at the descriptor */
|
||||
dev->next_descriptor_pointer = (unsigned int)desc & 0x1FFFFFFF;
|
||||
debug("next desc in sgdma 0x%x\n",
|
||||
(unsigned int)dev->next_descriptor_pointer);
|
||||
|
||||
/*
|
||||
* Set up SGDMA controller to:
|
||||
* - Disable interrupt generation
|
||||
* - Run once a valid descriptor is written to controller
|
||||
* - Stop on an error with any particular descriptor
|
||||
*/
|
||||
dev->control = (ALT_SGDMA_CONTROL_RUN_MSK |
|
||||
ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK);
|
||||
|
||||
/* Wait for the descriptor (chain) to complete */
|
||||
status = dev->status;
|
||||
debug("wait for sgdma....");
|
||||
while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK)
|
||||
;
|
||||
debug("done\n");
|
||||
|
||||
/* Clear Run */
|
||||
dev->control = (dev->control & (~ALT_SGDMA_CONTROL_RUN_MSK));
|
||||
|
||||
/* Get & clear status register contents */
|
||||
status = dev->status;
|
||||
dev->status = 0xFF;
|
||||
|
||||
/* we really should check if the transfer completes properly */
|
||||
debug("tx sgdma status = 0x%x", status);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int alt_sgdma_do_async_transfer(volatile struct alt_sgdma_registers *dev,
|
||||
volatile struct alt_sgdma_descriptor *desc)
|
||||
{
|
||||
unsigned int status;
|
||||
int counter = 0;
|
||||
|
||||
/* Wait for any pending transfers to complete */
|
||||
alt_sgdma_print_desc(desc);
|
||||
status = dev->status;
|
||||
|
||||
counter = 0;
|
||||
while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK) {
|
||||
if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
|
||||
break;
|
||||
}
|
||||
|
||||
if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
|
||||
debug("Timeout waiting sgdma in do async!\n");
|
||||
|
||||
/*
|
||||
* Clear any (previous) status register information
|
||||
* that might occlude our error checking later.
|
||||
*/
|
||||
dev->status = 0xFF;
|
||||
|
||||
/* Point the controller at the descriptor */
|
||||
dev->next_descriptor_pointer = (unsigned int)desc & 0x1FFFFFFF;
|
||||
|
||||
/*
|
||||
* Set up SGDMA controller to:
|
||||
* - Disable interrupt generation
|
||||
* - Run once a valid descriptor is written to controller
|
||||
* - Stop on an error with any particular descriptor
|
||||
*/
|
||||
dev->control = (ALT_SGDMA_CONTROL_RUN_MSK |
|
||||
ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK);
|
||||
|
||||
/* we really should check if the transfer completes properly */
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* u-boot interface */
|
||||
static int tse_adjust_link(struct altera_tse_priv *priv)
|
||||
{
|
||||
unsigned int refvar;
|
||||
|
||||
refvar = priv->mac_dev->command_config.image;
|
||||
|
||||
if (!(priv->duplexity))
|
||||
refvar |= ALTERA_TSE_CMD_HD_ENA_MSK;
|
||||
else
|
||||
refvar &= ~ALTERA_TSE_CMD_HD_ENA_MSK;
|
||||
|
||||
switch (priv->speed) {
|
||||
case 1000:
|
||||
refvar |= ALTERA_TSE_CMD_ETH_SPEED_MSK;
|
||||
refvar &= ~ALTERA_TSE_CMD_ENA_10_MSK;
|
||||
break;
|
||||
case 100:
|
||||
refvar &= ~ALTERA_TSE_CMD_ETH_SPEED_MSK;
|
||||
refvar &= ~ALTERA_TSE_CMD_ENA_10_MSK;
|
||||
break;
|
||||
case 10:
|
||||
refvar &= ~ALTERA_TSE_CMD_ETH_SPEED_MSK;
|
||||
refvar |= ALTERA_TSE_CMD_ENA_10_MSK;
|
||||
break;
|
||||
}
|
||||
priv->mac_dev->command_config.image = refvar;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int tse_eth_send(struct eth_device *dev,
|
||||
volatile void *packet, int length)
|
||||
{
|
||||
struct altera_tse_priv *priv = dev->priv;
|
||||
volatile struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx;
|
||||
volatile struct alt_sgdma_descriptor *tx_desc =
|
||||
(volatile struct alt_sgdma_descriptor *)priv->tx_desc;
|
||||
|
||||
volatile struct alt_sgdma_descriptor *tx_desc_cur =
|
||||
(volatile struct alt_sgdma_descriptor *)&tx_desc[0];
|
||||
|
||||
flush_dcache((unsigned long)packet, length);
|
||||
alt_sgdma_construct_descriptor_burst(
|
||||
(volatile struct alt_sgdma_descriptor *)&tx_desc[0],
|
||||
(volatile struct alt_sgdma_descriptor *)&tx_desc[1],
|
||||
(unsigned int *)packet, /* read addr */
|
||||
(unsigned int *)0,
|
||||
length, /* length or EOP ,will change for each tx */
|
||||
0x1, /* gen eop */
|
||||
0x0, /* read fixed */
|
||||
0x1, /* write fixed or sop */
|
||||
0x0, /* read burst */
|
||||
0x0, /* write burst */
|
||||
0x0 /* channel */
|
||||
);
|
||||
debug("TX Packet @ 0x%x,0x%x bytes", (unsigned int)packet, length);
|
||||
|
||||
/* send the packet */
|
||||
debug("sending packet\n");
|
||||
alt_sgdma_do_sync_transfer(tx_sgdma, tx_desc_cur);
|
||||
debug("sent %d bytes\n", tx_desc_cur->actual_bytes_transferred);
|
||||
return tx_desc_cur->actual_bytes_transferred;
|
||||
}
|
||||
|
||||
static int tse_eth_rx(struct eth_device *dev)
|
||||
{
|
||||
int packet_length = 0;
|
||||
struct altera_tse_priv *priv = dev->priv;
|
||||
volatile struct alt_sgdma_descriptor *rx_desc =
|
||||
(volatile struct alt_sgdma_descriptor *)priv->rx_desc;
|
||||
volatile struct alt_sgdma_descriptor *rx_desc_cur = &rx_desc[0];
|
||||
|
||||
if (rx_desc_cur->descriptor_status &
|
||||
ALT_SGDMA_DESCRIPTOR_STATUS_TERMINATED_BY_EOP_MSK) {
|
||||
debug("got packet\n");
|
||||
packet_length = rx_desc->actual_bytes_transferred;
|
||||
NetReceive(NetRxPackets[0], packet_length);
|
||||
|
||||
/* start descriptor again */
|
||||
flush_dcache((unsigned long)(NetRxPackets[0]), PKTSIZE_ALIGN);
|
||||
alt_sgdma_construct_descriptor_burst(
|
||||
(volatile struct alt_sgdma_descriptor *)&rx_desc[0],
|
||||
(volatile struct alt_sgdma_descriptor *)&rx_desc[1],
|
||||
(unsigned int)0x0, /* read addr */
|
||||
(unsigned int *)NetRxPackets[0],
|
||||
0x0, /* length or EOP */
|
||||
0x0, /* gen eop */
|
||||
0x0, /* read fixed */
|
||||
0x0, /* write fixed or sop */
|
||||
0x0, /* read burst */
|
||||
0x0, /* write burst */
|
||||
0x0 /* channel */
|
||||
);
|
||||
|
||||
/* setup the sgdma */
|
||||
alt_sgdma_do_async_transfer(priv->sgdma_rx, &rx_desc[0]);
|
||||
}
|
||||
|
||||
return -1;
|
||||
}
|
||||
|
||||
static void tse_eth_halt(struct eth_device *dev)
|
||||
{
|
||||
/* don't do anything! */
|
||||
/* this gets called after each uboot */
|
||||
/* network command. don't need to reset the thing all of the time */
|
||||
}
|
||||
|
||||
static void tse_eth_reset(struct eth_device *dev)
|
||||
{
|
||||
/* stop sgdmas, disable tse receive */
|
||||
struct altera_tse_priv *priv = dev->priv;
|
||||
volatile struct alt_tse_mac *mac_dev = priv->mac_dev;
|
||||
volatile struct alt_sgdma_registers *rx_sgdma = priv->sgdma_rx;
|
||||
volatile struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx;
|
||||
int counter;
|
||||
volatile struct alt_sgdma_descriptor *rx_desc =
|
||||
(volatile struct alt_sgdma_descriptor *)&priv->rx_desc[0];
|
||||
|
||||
/* clear rx desc & wait for sgdma to complete */
|
||||
rx_desc->descriptor_control = 0;
|
||||
rx_sgdma->control = 0;
|
||||
counter = 0;
|
||||
while (rx_sgdma->status & ALT_SGDMA_STATUS_BUSY_MSK) {
|
||||
if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
|
||||
break;
|
||||
}
|
||||
|
||||
if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) {
|
||||
debug("Timeout waiting for rx sgdma!\n");
|
||||
rx_sgdma->control &= ALT_SGDMA_CONTROL_SOFTWARERESET_MSK;
|
||||
rx_sgdma->control &= ALT_SGDMA_CONTROL_SOFTWARERESET_MSK;
|
||||
}
|
||||
|
||||
counter = 0;
|
||||
tx_sgdma->control = 0;
|
||||
while (tx_sgdma->status & ALT_SGDMA_STATUS_BUSY_MSK) {
|
||||
if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
|
||||
break;
|
||||
}
|
||||
|
||||
if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) {
|
||||
debug("Timeout waiting for tx sgdma!\n");
|
||||
tx_sgdma->control &= ALT_SGDMA_CONTROL_SOFTWARERESET_MSK;
|
||||
tx_sgdma->control &= ALT_SGDMA_CONTROL_SOFTWARERESET_MSK;
|
||||
}
|
||||
/* reset the mac */
|
||||
mac_dev->command_config.bits.transmit_enable = 1;
|
||||
mac_dev->command_config.bits.receive_enable = 1;
|
||||
mac_dev->command_config.bits.software_reset = 1;
|
||||
|
||||
counter = 0;
|
||||
while (mac_dev->command_config.bits.software_reset) {
|
||||
if (counter++ > ALT_TSE_SW_RESET_WATCHDOG_CNTR)
|
||||
break;
|
||||
}
|
||||
|
||||
if (counter >= ALT_TSE_SW_RESET_WATCHDOG_CNTR)
|
||||
debug("TSEMAC SW reset bit never cleared!\n");
|
||||
}
|
||||
|
||||
static int tse_mdio_read(struct altera_tse_priv *priv, unsigned int regnum)
|
||||
{
|
||||
volatile struct alt_tse_mac *mac_dev;
|
||||
unsigned int *mdio_regs;
|
||||
unsigned int data;
|
||||
u16 value;
|
||||
|
||||
mac_dev = priv->mac_dev;
|
||||
|
||||
/* set mdio address */
|
||||
mac_dev->mdio_phy1_addr = priv->phyaddr;
|
||||
mdio_regs = (unsigned int *)&mac_dev->mdio_phy1;
|
||||
|
||||
/* get the data */
|
||||
data = mdio_regs[regnum];
|
||||
|
||||
value = data & 0xffff;
|
||||
|
||||
return value;
|
||||
}
|
||||
|
||||
static int tse_mdio_write(struct altera_tse_priv *priv, unsigned int regnum,
|
||||
unsigned int value)
|
||||
{
|
||||
volatile struct alt_tse_mac *mac_dev;
|
||||
unsigned int *mdio_regs;
|
||||
unsigned int data;
|
||||
|
||||
mac_dev = priv->mac_dev;
|
||||
|
||||
/* set mdio address */
|
||||
mac_dev->mdio_phy1_addr = priv->phyaddr;
|
||||
mdio_regs = (unsigned int *)&mac_dev->mdio_phy1;
|
||||
|
||||
/* get the data */
|
||||
data = (unsigned int)value;
|
||||
|
||||
mdio_regs[regnum] = data;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* MDIO access to phy */
|
||||
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII)
|
||||
static int altera_tse_miiphy_write(char *devname, unsigned char addr,
|
||||
unsigned char reg, unsigned short value)
|
||||
{
|
||||
struct eth_device *dev;
|
||||
struct altera_tse_priv *priv;
|
||||
dev = eth_get_dev_by_name(devname);
|
||||
priv = dev->priv;
|
||||
|
||||
tse_mdio_write(priv, (uint) reg, (uint) value);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int altera_tse_miiphy_read(char *devname, unsigned char addr,
|
||||
unsigned char reg, unsigned short *value)
|
||||
{
|
||||
struct eth_device *dev;
|
||||
struct altera_tse_priv *priv;
|
||||
volatile struct alt_tse_mac *mac_dev;
|
||||
unsigned int *mdio_regs;
|
||||
|
||||
dev = eth_get_dev_by_name(devname);
|
||||
priv = dev->priv;
|
||||
|
||||
mac_dev = priv->mac_dev;
|
||||
mac_dev->mdio_phy1_addr = (int)addr;
|
||||
mdio_regs = (unsigned int *)&mac_dev->mdio_phy1;
|
||||
|
||||
*value = 0xffff & mdio_regs[reg];
|
||||
|
||||
return 0;
|
||||
|
||||
}
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Also copied from tsec.c
|
||||
*/
|
||||
/* Parse the status register for link, and then do
|
||||
* auto-negotiation
|
||||
*/
|
||||
static uint mii_parse_sr(uint mii_reg, struct altera_tse_priv *priv)
|
||||
{
|
||||
/*
|
||||
* Wait if the link is up, and autonegotiation is in progress
|
||||
* (ie - we're capable and it's not done)
|
||||
*/
|
||||
mii_reg = tse_mdio_read(priv, MIIM_STATUS);
|
||||
|
||||
if (!(mii_reg & MIIM_STATUS_LINK) && (mii_reg & PHY_BMSR_AUTN_ABLE)
|
||||
&& !(mii_reg & PHY_BMSR_AUTN_COMP)) {
|
||||
int i = 0;
|
||||
|
||||
puts("Waiting for PHY auto negotiation to complete");
|
||||
while (!(mii_reg & PHY_BMSR_AUTN_COMP)) {
|
||||
/*
|
||||
* Timeout reached ?
|
||||
*/
|
||||
if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
|
||||
puts(" TIMEOUT !\n");
|
||||
priv->link = 0;
|
||||
return 0;
|
||||
}
|
||||
|
||||
if ((i++ % 1000) == 0)
|
||||
putc('.');
|
||||
udelay(1000); /* 1 ms */
|
||||
mii_reg = tse_mdio_read(priv, MIIM_STATUS);
|
||||
}
|
||||
puts(" done\n");
|
||||
priv->link = 1;
|
||||
udelay(500000); /* another 500 ms (results in faster booting) */
|
||||
} else {
|
||||
if (mii_reg & MIIM_STATUS_LINK) {
|
||||
debug("Link is up\n");
|
||||
priv->link = 1;
|
||||
} else {
|
||||
debug("Link is down\n");
|
||||
priv->link = 0;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Parse the 88E1011's status register for speed and duplex
|
||||
* information
|
||||
*/
|
||||
static uint mii_parse_88E1011_psr(uint mii_reg, struct altera_tse_priv *priv)
|
||||
{
|
||||
uint speed;
|
||||
|
||||
mii_reg = tse_mdio_read(priv, MIIM_88E1011_PHY_STATUS);
|
||||
|
||||
if ((mii_reg & MIIM_88E1011_PHYSTAT_LINK) &&
|
||||
!(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) {
|
||||
int i = 0;
|
||||
|
||||
puts("Waiting for PHY realtime link");
|
||||
while (!(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) {
|
||||
/* Timeout reached ? */
|
||||
if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
|
||||
puts(" TIMEOUT !\n");
|
||||
priv->link = 0;
|
||||
break;
|
||||
}
|
||||
|
||||
if ((i++ == 1000) == 0) {
|
||||
i = 0;
|
||||
puts(".");
|
||||
}
|
||||
udelay(1000); /* 1 ms */
|
||||
mii_reg = tse_mdio_read(priv, MIIM_88E1011_PHY_STATUS);
|
||||
}
|
||||
puts(" done\n");
|
||||
udelay(500000); /* another 500 ms (results in faster booting) */
|
||||
} else {
|
||||
if (mii_reg & MIIM_88E1011_PHYSTAT_LINK)
|
||||
priv->link = 1;
|
||||
else
|
||||
priv->link = 0;
|
||||
}
|
||||
|
||||
if (mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX)
|
||||
priv->duplexity = 1;
|
||||
else
|
||||
priv->duplexity = 0;
|
||||
|
||||
speed = (mii_reg & MIIM_88E1011_PHYSTAT_SPEED);
|
||||
|
||||
switch (speed) {
|
||||
case MIIM_88E1011_PHYSTAT_GBIT:
|
||||
priv->speed = 1000;
|
||||
debug("PHY Speed is 1000Mbit\n");
|
||||
break;
|
||||
case MIIM_88E1011_PHYSTAT_100:
|
||||
debug("PHY Speed is 100Mbit\n");
|
||||
priv->speed = 100;
|
||||
break;
|
||||
default:
|
||||
debug("PHY Speed is 10Mbit\n");
|
||||
priv->speed = 10;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static uint mii_m88e1111s_setmode_sr(uint mii_reg, struct altera_tse_priv *priv)
|
||||
{
|
||||
uint mii_data = tse_mdio_read(priv, mii_reg);
|
||||
mii_data &= 0xfff0;
|
||||
mii_data |= 0xb;
|
||||
return mii_data;
|
||||
}
|
||||
|
||||
static uint mii_m88e1111s_setmode_cr(uint mii_reg, struct altera_tse_priv *priv)
|
||||
{
|
||||
uint mii_data = tse_mdio_read(priv, mii_reg);
|
||||
mii_data &= ~0x82;
|
||||
mii_data |= 0x82;
|
||||
return mii_data;
|
||||
}
|
||||
|
||||
/*
|
||||
* Returns which value to write to the control register.
|
||||
* For 10/100, the value is slightly different
|
||||
*/
|
||||
static uint mii_cr_init(uint mii_reg, struct altera_tse_priv *priv)
|
||||
{
|
||||
return MIIM_CONTROL_INIT;
|
||||
}
|
||||
|
||||
/*
|
||||
* PHY & MDIO code
|
||||
* Need to add SGMII stuff
|
||||
*
|
||||
*/
|
||||
|
||||
static struct phy_info phy_info_M88E1111S = {
|
||||
0x01410cc,
|
||||
"Marvell 88E1111S",
|
||||
4,
|
||||
(struct phy_cmd[]){ /* config */
|
||||
/* Reset and configure the PHY */
|
||||
{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
|
||||
{MIIM_88E1111_PHY_EXT_SR, 0x848f,
|
||||
&mii_m88e1111s_setmode_sr},
|
||||
/* Delay RGMII TX and RX */
|
||||
{MIIM_88E1111_PHY_EXT_CR, 0x0cd2,
|
||||
&mii_m88e1111s_setmode_cr},
|
||||
{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
|
||||
{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
|
||||
{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
|
||||
{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
|
||||
{miim_end,}
|
||||
},
|
||||
(struct phy_cmd[]){ /* startup */
|
||||
/* Status is read once to clear old link state */
|
||||
{MIIM_STATUS, miim_read, NULL},
|
||||
/* Auto-negotiate */
|
||||
{MIIM_STATUS, miim_read, &mii_parse_sr},
|
||||
/* Read the status */
|
||||
{MIIM_88E1011_PHY_STATUS, miim_read,
|
||||
&mii_parse_88E1011_psr},
|
||||
{miim_end,}
|
||||
},
|
||||
(struct phy_cmd[]){ /* shutdown */
|
||||
{miim_end,}
|
||||
},
|
||||
};
|
||||
|
||||
/* a generic flavor. */
|
||||
static struct phy_info phy_info_generic = {
|
||||
0,
|
||||
"Unknown/Generic PHY",
|
||||
32,
|
||||
(struct phy_cmd[]){ /* config */
|
||||
{PHY_BMCR, PHY_BMCR_RESET, NULL},
|
||||
{PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG, NULL},
|
||||
{miim_end,}
|
||||
},
|
||||
(struct phy_cmd[]){ /* startup */
|
||||
{PHY_BMSR, miim_read, NULL},
|
||||
{PHY_BMSR, miim_read, &mii_parse_sr},
|
||||
{miim_end,}
|
||||
},
|
||||
(struct phy_cmd[]){ /* shutdown */
|
||||
{miim_end,}
|
||||
}
|
||||
};
|
||||
|
||||
static struct phy_info *phy_info[] = {
|
||||
&phy_info_M88E1111S,
|
||||
NULL
|
||||
};
|
||||
|
||||
/* Grab the identifier of the device's PHY, and search through
|
||||
* all of the known PHYs to see if one matches. If so, return
|
||||
* it, if not, return NULL
|
||||
*/
|
||||
static struct phy_info *get_phy_info(struct eth_device *dev)
|
||||
{
|
||||
struct altera_tse_priv *priv = (struct altera_tse_priv *)dev->priv;
|
||||
uint phy_reg, phy_ID;
|
||||
int i;
|
||||
struct phy_info *theInfo = NULL;
|
||||
|
||||
/* Grab the bits from PHYIR1, and put them in the upper half */
|
||||
phy_reg = tse_mdio_read(priv, MIIM_PHYIR1);
|
||||
phy_ID = (phy_reg & 0xffff) << 16;
|
||||
|
||||
/* Grab the bits from PHYIR2, and put them in the lower half */
|
||||
phy_reg = tse_mdio_read(priv, MIIM_PHYIR2);
|
||||
phy_ID |= (phy_reg & 0xffff);
|
||||
|
||||
/* loop through all the known PHY types, and find one that */
|
||||
/* matches the ID we read from the PHY. */
|
||||
for (i = 0; phy_info[i]; i++) {
|
||||
if (phy_info[i]->id == (phy_ID >> phy_info[i]->shift)) {
|
||||
theInfo = phy_info[i];
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
if (theInfo == NULL) {
|
||||
theInfo = &phy_info_generic;
|
||||
debug("%s: No support for PHY id %x; assuming generic\n",
|
||||
dev->name, phy_ID);
|
||||
} else
|
||||
debug("%s: PHY is %s (%x)\n", dev->name, theInfo->name, phy_ID);
|
||||
|
||||
return theInfo;
|
||||
}
|
||||
|
||||
/* Execute the given series of commands on the given device's
|
||||
* PHY, running functions as necessary
|
||||
*/
|
||||
static void phy_run_commands(struct altera_tse_priv *priv, struct phy_cmd *cmd)
|
||||
{
|
||||
int i;
|
||||
uint result;
|
||||
|
||||
for (i = 0; cmd->mii_reg != miim_end; i++) {
|
||||
if (cmd->mii_data == miim_read) {
|
||||
result = tse_mdio_read(priv, cmd->mii_reg);
|
||||
|
||||
if (cmd->funct != NULL)
|
||||
(*(cmd->funct)) (result, priv);
|
||||
|
||||
} else {
|
||||
if (cmd->funct != NULL)
|
||||
result = (*(cmd->funct)) (cmd->mii_reg, priv);
|
||||
else
|
||||
result = cmd->mii_data;
|
||||
|
||||
tse_mdio_write(priv, cmd->mii_reg, result);
|
||||
|
||||
}
|
||||
cmd++;
|
||||
}
|
||||
}
|
||||
|
||||
/* Phy init code */
|
||||
static int init_phy(struct eth_device *dev)
|
||||
{
|
||||
struct altera_tse_priv *priv = (struct altera_tse_priv *)dev->priv;
|
||||
struct phy_info *curphy;
|
||||
|
||||
/* Get the cmd structure corresponding to the attached
|
||||
* PHY */
|
||||
curphy = get_phy_info(dev);
|
||||
|
||||
if (curphy == NULL) {
|
||||
priv->phyinfo = NULL;
|
||||
debug("%s: No PHY found\n", dev->name);
|
||||
|
||||
return 0;
|
||||
} else
|
||||
debug("%s found\n", curphy->name);
|
||||
priv->phyinfo = curphy;
|
||||
|
||||
phy_run_commands(priv, priv->phyinfo->config);
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
static int tse_eth_init(struct eth_device *dev, bd_t * bd)
|
||||
{
|
||||
int dat;
|
||||
struct altera_tse_priv *priv = dev->priv;
|
||||
volatile struct alt_tse_mac *mac_dev = priv->mac_dev;
|
||||
volatile struct alt_sgdma_descriptor *tx_desc = priv->tx_desc;
|
||||
volatile struct alt_sgdma_descriptor *rx_desc = priv->rx_desc;
|
||||
volatile struct alt_sgdma_descriptor *rx_desc_cur =
|
||||
(volatile struct alt_sgdma_descriptor *)&rx_desc[0];
|
||||
|
||||
/* stop controller */
|
||||
debug("Reseting TSE & SGDMAs\n");
|
||||
tse_eth_reset(dev);
|
||||
|
||||
/* start the phy */
|
||||
debug("Configuring PHY\n");
|
||||
phy_run_commands(priv, priv->phyinfo->startup);
|
||||
|
||||
/* need to create sgdma */
|
||||
debug("Configuring tx desc\n");
|
||||
alt_sgdma_construct_descriptor_burst(
|
||||
(volatile struct alt_sgdma_descriptor *)&tx_desc[0],
|
||||
(volatile struct alt_sgdma_descriptor *)&tx_desc[1],
|
||||
(unsigned int *)NULL, /* read addr */
|
||||
(unsigned int *)0,
|
||||
0, /* length or EOP ,will change for each tx */
|
||||
0x1, /* gen eop */
|
||||
0x0, /* read fixed */
|
||||
0x1, /* write fixed or sop */
|
||||
0x0, /* read burst */
|
||||
0x0, /* write burst */
|
||||
0x0 /* channel */
|
||||
);
|
||||
debug("Configuring rx desc\n");
|
||||
flush_dcache((unsigned long)(NetRxPackets[0]), PKTSIZE_ALIGN);
|
||||
alt_sgdma_construct_descriptor_burst(
|
||||
(volatile struct alt_sgdma_descriptor *)&rx_desc[0],
|
||||
(volatile struct alt_sgdma_descriptor *)&rx_desc[1],
|
||||
(unsigned int)0x0, /* read addr */
|
||||
(unsigned int *)NetRxPackets[0],
|
||||
0x0, /* length or EOP */
|
||||
0x0, /* gen eop */
|
||||
0x0, /* read fixed */
|
||||
0x0, /* write fixed or sop */
|
||||
0x0, /* read burst */
|
||||
0x0, /* write burst */
|
||||
0x0 /* channel */
|
||||
);
|
||||
/* start rx async transfer */
|
||||
debug("Starting rx sgdma\n");
|
||||
alt_sgdma_do_async_transfer(priv->sgdma_rx, rx_desc_cur);
|
||||
|
||||
/* start TSE */
|
||||
debug("Configuring TSE Mac\n");
|
||||
/* Initialize MAC registers */
|
||||
mac_dev->max_frame_length = PKTSIZE_ALIGN;
|
||||
mac_dev->rx_almost_empty_threshold = 8;
|
||||
mac_dev->rx_almost_full_threshold = 8;
|
||||
mac_dev->tx_almost_empty_threshold = 8;
|
||||
mac_dev->tx_almost_full_threshold = 3;
|
||||
mac_dev->tx_sel_empty_threshold =
|
||||
CONFIG_SYS_ALTERA_TSE_TX_FIFO - 16;
|
||||
mac_dev->tx_sel_full_threshold = 0;
|
||||
mac_dev->rx_sel_empty_threshold =
|
||||
CONFIG_SYS_ALTERA_TSE_TX_FIFO - 16;
|
||||
mac_dev->rx_sel_full_threshold = 0;
|
||||
|
||||
/* NO Shift */
|
||||
mac_dev->rx_cmd_stat.bits.rx_shift16 = 0;
|
||||
mac_dev->tx_cmd_stat.bits.tx_shift16 = 0;
|
||||
|
||||
/* enable MAC */
|
||||
dat = 0;
|
||||
dat = ALTERA_TSE_CMD_TX_ENA_MSK | ALTERA_TSE_CMD_RX_ENA_MSK;
|
||||
|
||||
mac_dev->command_config.image = dat;
|
||||
|
||||
/* Set the MAC address */
|
||||
debug("Setting MAC address to 0x%x%x%x%x%x%x\n",
|
||||
dev->enetaddr[5], dev->enetaddr[4],
|
||||
dev->enetaddr[3], dev->enetaddr[2],
|
||||
dev->enetaddr[1], dev->enetaddr[0]);
|
||||
mac_dev->mac_addr_0 = ((dev->enetaddr[3]) << 24 |
|
||||
(dev->enetaddr[2]) << 16 |
|
||||
(dev->enetaddr[1]) << 8 | (dev->enetaddr[0]));
|
||||
|
||||
mac_dev->mac_addr_1 = ((dev->enetaddr[5] << 8 |
|
||||
(dev->enetaddr[4])) & 0xFFFF);
|
||||
|
||||
/* Set the MAC address */
|
||||
mac_dev->supp_mac_addr_0_0 = mac_dev->mac_addr_0;
|
||||
mac_dev->supp_mac_addr_0_1 = mac_dev->mac_addr_1;
|
||||
|
||||
/* Set the MAC address */
|
||||
mac_dev->supp_mac_addr_1_0 = mac_dev->mac_addr_0;
|
||||
mac_dev->supp_mac_addr_1_1 = mac_dev->mac_addr_1;
|
||||
|
||||
/* Set the MAC address */
|
||||
mac_dev->supp_mac_addr_2_0 = mac_dev->mac_addr_0;
|
||||
mac_dev->supp_mac_addr_2_1 = mac_dev->mac_addr_1;
|
||||
|
||||
/* Set the MAC address */
|
||||
mac_dev->supp_mac_addr_3_0 = mac_dev->mac_addr_0;
|
||||
mac_dev->supp_mac_addr_3_1 = mac_dev->mac_addr_1;
|
||||
|
||||
/* configure the TSE core */
|
||||
/* -- output clocks, */
|
||||
/* -- and later config stuff for SGMII */
|
||||
if (priv->link) {
|
||||
debug("Adjusting TSE to link speed\n");
|
||||
tse_adjust_link(priv);
|
||||
}
|
||||
|
||||
return priv->link ? 0 : -1;
|
||||
}
|
||||
|
||||
/* TSE init code */
|
||||
int altera_tse_initialize(u8 dev_num, int mac_base,
|
||||
int sgdma_rx_base, int sgdma_tx_base)
|
||||
{
|
||||
struct altera_tse_priv *priv;
|
||||
struct eth_device *dev;
|
||||
struct alt_sgdma_descriptor *rx_desc;
|
||||
struct alt_sgdma_descriptor *tx_desc;
|
||||
unsigned long dma_handle;
|
||||
|
||||
dev = (struct eth_device *)malloc(sizeof *dev);
|
||||
|
||||
if (NULL == dev)
|
||||
return 0;
|
||||
|
||||
memset(dev, 0, sizeof *dev);
|
||||
|
||||
priv = malloc(sizeof(*priv));
|
||||
|
||||
if (!priv) {
|
||||
free(dev);
|
||||
return 0;
|
||||
}
|
||||
tx_desc = dma_alloc_coherent(sizeof(*tx_desc) * (3 + PKTBUFSRX),
|
||||
&dma_handle);
|
||||
rx_desc = tx_desc + 2;
|
||||
debug("tx desc: address = 0x%x\n", (unsigned int)tx_desc);
|
||||
debug("rx desc: address = 0x%x\n", (unsigned int)rx_desc);
|
||||
|
||||
if (!tx_desc) {
|
||||
free(priv);
|
||||
free(dev);
|
||||
return 0;
|
||||
}
|
||||
memset(rx_desc, 0, (sizeof *rx_desc) * (PKTBUFSRX + 1));
|
||||
memset(tx_desc, 0, (sizeof *tx_desc) * 2);
|
||||
|
||||
/* initialize tse priv */
|
||||
priv->mac_dev = (volatile struct alt_tse_mac *)mac_base;
|
||||
priv->sgdma_rx = (volatile struct alt_sgdma_registers *)sgdma_rx_base;
|
||||
priv->sgdma_tx = (volatile struct alt_sgdma_registers *)sgdma_tx_base;
|
||||
priv->phyaddr = CONFIG_SYS_ALTERA_TSE_PHY_ADDR;
|
||||
priv->flags = CONFIG_SYS_ALTERA_TSE_FLAGS;
|
||||
priv->rx_desc = rx_desc;
|
||||
priv->tx_desc = tx_desc;
|
||||
|
||||
/* init eth structure */
|
||||
dev->priv = priv;
|
||||
dev->init = tse_eth_init;
|
||||
dev->halt = tse_eth_halt;
|
||||
dev->send = tse_eth_send;
|
||||
dev->recv = tse_eth_rx;
|
||||
sprintf(dev->name, "%s-%hu", "ALTERA_TSE", dev_num);
|
||||
|
||||
eth_register(dev);
|
||||
|
||||
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII)
|
||||
miiphy_register(dev->name, altera_tse_miiphy_read,
|
||||
altera_tse_miiphy_write);
|
||||
#endif
|
||||
|
||||
init_phy(dev);
|
||||
|
||||
return 1;
|
||||
}
|
494
drivers/net/altera_tse.h
Normal file
494
drivers/net/altera_tse.h
Normal file
@ -0,0 +1,494 @@
|
||||
/*
|
||||
* Altera 10/100/1000 triple speed ethernet mac
|
||||
*
|
||||
* Copyright (C) 2008 Altera Corporation.
|
||||
* Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
#ifndef _ALTERA_TSE_H_
|
||||
#define _ALTERA_TSE_H_
|
||||
|
||||
#define __packed_1_ __attribute__ ((packed, aligned(1)))
|
||||
|
||||
/* PHY Stuff */
|
||||
#define miim_end -2
|
||||
#define miim_read -1
|
||||
|
||||
#define PHY_AUTONEGOTIATE_TIMEOUT 5000 /* in ms */
|
||||
|
||||
#ifndef CONFIG_SYS_TBIPA_VALUE
|
||||
#define CONFIG_SYS_TBIPA_VALUE 0x1f
|
||||
#endif
|
||||
#define MIIMCFG_INIT_VALUE 0x00000003
|
||||
#define MIIMCFG_RESET 0x80000000
|
||||
|
||||
#define MIIMIND_BUSY 0x00000001
|
||||
#define MIIMIND_NOTVALID 0x00000004
|
||||
|
||||
#define MIIM_CONTROL 0x00
|
||||
#define MIIM_CONTROL_RESET 0x00009140
|
||||
#define MIIM_CONTROL_INIT 0x00001140
|
||||
#define MIIM_CONTROL_RESTART 0x00001340
|
||||
#define MIIM_ANEN 0x00001000
|
||||
|
||||
#define MIIM_CR 0x00
|
||||
#define MIIM_CR_RST 0x00008000
|
||||
#define MIIM_CR_INIT 0x00001000
|
||||
|
||||
#define MIIM_STATUS 0x1
|
||||
#define MIIM_STATUS_AN_DONE 0x00000020
|
||||
#define MIIM_STATUS_LINK 0x0004
|
||||
#define PHY_BMSR_AUTN_ABLE 0x0008
|
||||
#define PHY_BMSR_AUTN_COMP 0x0020
|
||||
|
||||
#define MIIM_PHYIR1 0x2
|
||||
#define MIIM_PHYIR2 0x3
|
||||
|
||||
#define MIIM_ANAR 0x4
|
||||
#define MIIM_ANAR_INIT 0x1e1
|
||||
|
||||
#define MIIM_TBI_ANLPBPA 0x5
|
||||
#define MIIM_TBI_ANLPBPA_HALF 0x00000040
|
||||
#define MIIM_TBI_ANLPBPA_FULL 0x00000020
|
||||
|
||||
#define MIIM_TBI_ANEX 0x6
|
||||
#define MIIM_TBI_ANEX_NP 0x00000004
|
||||
#define MIIM_TBI_ANEX_PRX 0x00000002
|
||||
|
||||
#define MIIM_GBIT_CONTROL 0x9
|
||||
#define MIIM_GBIT_CONTROL_INIT 0xe00
|
||||
|
||||
#define MIIM_EXT_PAGE_ACCESS 0x1f
|
||||
|
||||
/* 88E1011 PHY Status Register */
|
||||
#define MIIM_88E1011_PHY_STATUS 0x11
|
||||
#define MIIM_88E1011_PHYSTAT_SPEED 0xc000
|
||||
#define MIIM_88E1011_PHYSTAT_GBIT 0x8000
|
||||
#define MIIM_88E1011_PHYSTAT_100 0x4000
|
||||
#define MIIM_88E1011_PHYSTAT_DUPLEX 0x2000
|
||||
#define MIIM_88E1011_PHYSTAT_SPDDONE 0x0800
|
||||
#define MIIM_88E1011_PHYSTAT_LINK 0x0400
|
||||
|
||||
#define MIIM_88E1011_PHY_SCR 0x10
|
||||
#define MIIM_88E1011_PHY_MDI_X_AUTO 0x0060
|
||||
|
||||
#define MIIM_88E1111_PHY_EXT_CR 0x14
|
||||
#define MIIM_88E1111_PHY_EXT_SR 0x1b
|
||||
|
||||
/* 88E1111 PHY LED Control Register */
|
||||
#define MIIM_88E1111_PHY_LED_CONTROL 24
|
||||
#define MIIM_88E1111_PHY_LED_DIRECT 0x4100
|
||||
#define MIIM_88E1111_PHY_LED_COMBINE 0x411C
|
||||
|
||||
#define MIIM_READ_COMMAND 0x00000001
|
||||
|
||||
/* struct phy_info: a structure which defines attributes for a PHY
|
||||
* id will contain a number which represents the PHY. During
|
||||
* startup, the driver will poll the PHY to find out what its
|
||||
* UID--as defined by registers 2 and 3--is. The 32-bit result
|
||||
* gotten from the PHY will be shifted right by "shift" bits to
|
||||
* discard any bits which may change based on revision numbers
|
||||
* unimportant to functionality
|
||||
*
|
||||
* The struct phy_cmd entries represent pointers to an arrays of
|
||||
* commands which tell the driver what to do to the PHY.
|
||||
*/
|
||||
struct phy_info {
|
||||
uint id;
|
||||
char *name;
|
||||
uint shift;
|
||||
/* Called to configure the PHY, and modify the controller
|
||||
* based on the results */
|
||||
struct phy_cmd *config;
|
||||
|
||||
/* Called when starting up the controller */
|
||||
struct phy_cmd *startup;
|
||||
|
||||
/* Called when bringing down the controller */
|
||||
struct phy_cmd *shutdown;
|
||||
};
|
||||
|
||||
/* SGDMA Stuff */
|
||||
#define ALT_SGDMA_STATUS_ERROR_MSK (0x00000001)
|
||||
#define ALT_SGDMA_STATUS_EOP_ENCOUNTERED_MSK (0x00000002)
|
||||
#define ALT_SGDMA_STATUS_DESC_COMPLETED_MSK (0x00000004)
|
||||
#define ALT_SGDMA_STATUS_CHAIN_COMPLETED_MSK (0x00000008)
|
||||
#define ALT_SGDMA_STATUS_BUSY_MSK (0x00000010)
|
||||
|
||||
#define ALT_SGDMA_CONTROL_IE_ERROR_MSK (0x00000001)
|
||||
#define ALT_SGDMA_CONTROL_IE_EOP_ENCOUNTERED_MSK (0x00000002)
|
||||
#define ALT_SGDMA_CONTROL_IE_DESC_COMPLETED_MSK (0x00000004)
|
||||
#define ALT_SGDMA_CONTROL_IE_CHAIN_COMPLETED_MSK (0x00000008)
|
||||
#define ALT_SGDMA_CONTROL_IE_GLOBAL_MSK (0x00000010)
|
||||
#define ALT_SGDMA_CONTROL_RUN_MSK (0x00000020)
|
||||
#define ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK (0x00000040)
|
||||
#define ALT_SGDMA_CONTROL_IE_MAX_DESC_PROCESSED_MSK (0x00000080)
|
||||
#define ALT_SGDMA_CONTROL_MAX_DESC_PROCESSED_MSK (0x0000FF00)
|
||||
#define ALT_SGDMA_CONTROL_SOFTWARERESET_MSK (0x00010000)
|
||||
#define ALT_SGDMA_CONTROL_PARK_MSK (0x00020000)
|
||||
#define ALT_SGDMA_CONTROL_CLEAR_INTERRUPT_MSK (0x80000000)
|
||||
|
||||
#define ALTERA_TSE_SGDMA_INTR_MASK (ALT_SGDMA_CONTROL_IE_CHAIN_COMPLETED_MSK \
|
||||
| ALT_SGDMA_STATUS_DESC_COMPLETED_MSK \
|
||||
| ALT_SGDMA_CONTROL_IE_GLOBAL_MSK)
|
||||
|
||||
/*
|
||||
* Descriptor control bit masks & offsets
|
||||
*
|
||||
* Note: The control byte physically occupies bits [31:24] in memory.
|
||||
* The following bit-offsets are expressed relative to the LSB of
|
||||
* the control register bitfield.
|
||||
*/
|
||||
#define ALT_SGDMA_DESCRIPTOR_CONTROL_GENERATE_EOP_MSK (0x00000001)
|
||||
#define ALT_SGDMA_DESCRIPTOR_CONTROL_READ_FIXED_ADDRESS_MSK (0x00000002)
|
||||
#define ALT_SGDMA_DESCRIPTOR_CONTROL_WRITE_FIXED_ADDRESS_MSK (0x00000004)
|
||||
#define ALT_SGDMA_DESCRIPTOR_CONTROL_ATLANTIC_CHANNEL_MSK (0x00000008)
|
||||
#define ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK (0x00000080)
|
||||
|
||||
/*
|
||||
* Descriptor status bit masks & offsets
|
||||
*
|
||||
* Note: The status byte physically occupies bits [23:16] in memory.
|
||||
* The following bit-offsets are expressed relative to the LSB of
|
||||
* the status register bitfield.
|
||||
*/
|
||||
#define ALT_SGDMA_DESCRIPTOR_STATUS_E_CRC_MSK (0x00000001)
|
||||
#define ALT_SGDMA_DESCRIPTOR_STATUS_E_PARITY_MSK (0x00000002)
|
||||
#define ALT_SGDMA_DESCRIPTOR_STATUS_E_OVERFLOW_MSK (0x00000004)
|
||||
#define ALT_SGDMA_DESCRIPTOR_STATUS_E_SYNC_MSK (0x00000008)
|
||||
#define ALT_SGDMA_DESCRIPTOR_STATUS_E_UEOP_MSK (0x00000010)
|
||||
#define ALT_SGDMA_DESCRIPTOR_STATUS_E_MEOP_MSK (0x00000020)
|
||||
#define ALT_SGDMA_DESCRIPTOR_STATUS_E_MSOP_MSK (0x00000040)
|
||||
#define ALT_SGDMA_DESCRIPTOR_STATUS_TERMINATED_BY_EOP_MSK (0x00000080)
|
||||
#define ALT_SGDMA_DESCRIPTOR_STATUS_ERROR_MSK (0x0000007F)
|
||||
|
||||
/*
|
||||
* The SGDMA controller buffer descriptor allocates
|
||||
* 64 bits for each address. To support ANSI C, the
|
||||
* struct implementing a descriptor places 32-bits
|
||||
* of padding directly above each address; each pad must
|
||||
* be cleared when initializing a descriptor.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Buffer Descriptor data structure
|
||||
*
|
||||
*/
|
||||
struct alt_sgdma_descriptor {
|
||||
unsigned int *source; /* the address of data to be read. */
|
||||
unsigned int source_pad;
|
||||
|
||||
unsigned int *destination; /* the address to write data */
|
||||
unsigned int destination_pad;
|
||||
|
||||
unsigned int *next; /* the next descriptor in the list. */
|
||||
unsigned int next_pad;
|
||||
|
||||
unsigned short bytes_to_transfer; /* the number of bytes to transfer */
|
||||
unsigned char read_burst;
|
||||
unsigned char write_burst;
|
||||
|
||||
unsigned short actual_bytes_transferred;/* bytes transferred by DMA */
|
||||
unsigned char descriptor_status;
|
||||
unsigned char descriptor_control;
|
||||
|
||||
} __packed_1_;
|
||||
|
||||
/* SG-DMA Control/Status Slave registers map */
|
||||
|
||||
struct alt_sgdma_registers {
|
||||
unsigned int status;
|
||||
unsigned int status_pad[3];
|
||||
unsigned int control;
|
||||
unsigned int control_pad[3];
|
||||
unsigned int next_descriptor_pointer;
|
||||
unsigned int descriptor_pad[3];
|
||||
};
|
||||
|
||||
/* TSE Stuff */
|
||||
#define ALTERA_TSE_CMD_TX_ENA_MSK (0x00000001)
|
||||
#define ALTERA_TSE_CMD_RX_ENA_MSK (0x00000002)
|
||||
#define ALTERA_TSE_CMD_XON_GEN_MSK (0x00000004)
|
||||
#define ALTERA_TSE_CMD_ETH_SPEED_MSK (0x00000008)
|
||||
#define ALTERA_TSE_CMD_PROMIS_EN_MSK (0x00000010)
|
||||
#define ALTERA_TSE_CMD_PAD_EN_MSK (0x00000020)
|
||||
#define ALTERA_TSE_CMD_CRC_FWD_MSK (0x00000040)
|
||||
#define ALTERA_TSE_CMD_PAUSE_FWD_MSK (0x00000080)
|
||||
#define ALTERA_TSE_CMD_PAUSE_IGNORE_MSK (0x00000100)
|
||||
#define ALTERA_TSE_CMD_TX_ADDR_INS_MSK (0x00000200)
|
||||
#define ALTERA_TSE_CMD_HD_ENA_MSK (0x00000400)
|
||||
#define ALTERA_TSE_CMD_EXCESS_COL_MSK (0x00000800)
|
||||
#define ALTERA_TSE_CMD_LATE_COL_MSK (0x00001000)
|
||||
#define ALTERA_TSE_CMD_SW_RESET_MSK (0x00002000)
|
||||
#define ALTERA_TSE_CMD_MHASH_SEL_MSK (0x00004000)
|
||||
#define ALTERA_TSE_CMD_LOOPBACK_MSK (0x00008000)
|
||||
/* Bits (18:16) = address select */
|
||||
#define ALTERA_TSE_CMD_TX_ADDR_SEL_MSK (0x00070000)
|
||||
#define ALTERA_TSE_CMD_MAGIC_ENA_MSK (0x00080000)
|
||||
#define ALTERA_TSE_CMD_SLEEP_MSK (0x00100000)
|
||||
#define ALTERA_TSE_CMD_WAKEUP_MSK (0x00200000)
|
||||
#define ALTERA_TSE_CMD_XOFF_GEN_MSK (0x00400000)
|
||||
#define ALTERA_TSE_CMD_CNTL_FRM_ENA_MSK (0x00800000)
|
||||
#define ALTERA_TSE_CMD_NO_LENGTH_CHECK_MSK (0x01000000)
|
||||
#define ALTERA_TSE_CMD_ENA_10_MSK (0x02000000)
|
||||
#define ALTERA_TSE_CMD_RX_ERR_DISC_MSK (0x04000000)
|
||||
/* Bits (30..27) reserved */
|
||||
#define ALTERA_TSE_CMD_CNT_RESET_MSK (0x80000000)
|
||||
|
||||
#define ALTERA_TSE_TX_CMD_STAT_TX_SHIFT16 (0x00040000)
|
||||
#define ALTERA_TSE_TX_CMD_STAT_OMIT_CRC (0x00020000)
|
||||
|
||||
#define ALTERA_TSE_RX_CMD_STAT_RX_SHIFT16 (0x02000000)
|
||||
|
||||
#define ALT_TSE_SW_RESET_WATCHDOG_CNTR 10000
|
||||
#define ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR 90000000
|
||||
|
||||
/* Command_Config Register Bit Definitions */
|
||||
|
||||
typedef volatile union __alt_tse_command_config {
|
||||
unsigned int image;
|
||||
struct {
|
||||
unsigned int
|
||||
transmit_enable:1, /* bit 0 */
|
||||
receive_enable:1, /* bit 1 */
|
||||
pause_frame_xon_gen:1, /* bit 2 */
|
||||
ethernet_speed:1, /* bit 3 */
|
||||
promiscuous_enable:1, /* bit 4 */
|
||||
pad_enable:1, /* bit 5 */
|
||||
crc_forward:1, /* bit 6 */
|
||||
pause_frame_forward:1, /* bit 7 */
|
||||
pause_frame_ignore:1, /* bit 8 */
|
||||
set_mac_address_on_tx:1, /* bit 9 */
|
||||
halfduplex_enable:1, /* bit 10 */
|
||||
excessive_collision:1, /* bit 11 */
|
||||
late_collision:1, /* bit 12 */
|
||||
software_reset:1, /* bit 13 */
|
||||
multicast_hash_mode_sel:1, /* bit 14 */
|
||||
loopback_enable:1, /* bit 15 */
|
||||
src_mac_addr_sel_on_tx:3, /* bit 18:16 */
|
||||
magic_packet_detect:1, /* bit 19 */
|
||||
sleep_mode_enable:1, /* bit 20 */
|
||||
wake_up_request:1, /* bit 21 */
|
||||
pause_frame_xoff_gen:1, /* bit 22 */
|
||||
control_frame_enable:1, /* bit 23 */
|
||||
payload_len_chk_disable:1, /* bit 24 */
|
||||
enable_10mbps_intf:1, /* bit 25 */
|
||||
rx_error_discard_enable:1, /* bit 26 */
|
||||
reserved_bits:4, /* bit 30:27 */
|
||||
self_clear_counter_reset:1; /* bit 31 */
|
||||
} __packed_1_ bits;
|
||||
} __packed_1_ alt_tse_command_config;
|
||||
|
||||
/* Tx_Cmd_Stat Register Bit Definitions */
|
||||
|
||||
typedef volatile union __alt_tse_tx_cmd_stat {
|
||||
unsigned int image;
|
||||
struct {
|
||||
unsigned int reserved_lsbs:17, /* bit 16:0 */
|
||||
omit_crc:1, /* bit 17 */
|
||||
tx_shift16:1, /* bit 18 */
|
||||
reserved_msbs:13; /* bit 31:19 */
|
||||
|
||||
} __packed_1_ bits;
|
||||
} alt_tse_tx_cmd_stat;
|
||||
|
||||
/* Rx_Cmd_Stat Register Bit Definitions */
|
||||
|
||||
typedef volatile union __alt_tse_rx_cmd_stat {
|
||||
unsigned int image;
|
||||
struct {
|
||||
unsigned int reserved_lsbs:25, /* bit 24:0 */
|
||||
rx_shift16:1, /* bit 25 */
|
||||
reserved_msbs:6; /* bit 31:26 */
|
||||
|
||||
} __packed_1_ bits;
|
||||
} alt_tse_rx_cmd_stat;
|
||||
|
||||
struct alt_tse_mdio {
|
||||
unsigned int control; /*PHY device operation control register */
|
||||
unsigned int status; /*PHY device operation status register */
|
||||
unsigned int phy_id1; /*Bits 31:16 of PHY identifier. */
|
||||
unsigned int phy_id2; /*Bits 15:0 of PHY identifier. */
|
||||
unsigned int auto_negotiation_advertisement;
|
||||
unsigned int remote_partner_base_page_ability;
|
||||
|
||||
unsigned int reg6;
|
||||
unsigned int reg7;
|
||||
unsigned int reg8;
|
||||
unsigned int reg9;
|
||||
unsigned int rega;
|
||||
unsigned int regb;
|
||||
unsigned int regc;
|
||||
unsigned int regd;
|
||||
unsigned int rege;
|
||||
unsigned int regf;
|
||||
unsigned int reg10;
|
||||
unsigned int reg11;
|
||||
unsigned int reg12;
|
||||
unsigned int reg13;
|
||||
unsigned int reg14;
|
||||
unsigned int reg15;
|
||||
unsigned int reg16;
|
||||
unsigned int reg17;
|
||||
unsigned int reg18;
|
||||
unsigned int reg19;
|
||||
unsigned int reg1a;
|
||||
unsigned int reg1b;
|
||||
unsigned int reg1c;
|
||||
unsigned int reg1d;
|
||||
unsigned int reg1e;
|
||||
unsigned int reg1f;
|
||||
};
|
||||
|
||||
/* MAC register Space */
|
||||
|
||||
struct alt_tse_mac {
|
||||
unsigned int megacore_revision;
|
||||
unsigned int scratch_pad;
|
||||
alt_tse_command_config command_config;
|
||||
unsigned int mac_addr_0;
|
||||
unsigned int mac_addr_1;
|
||||
unsigned int max_frame_length;
|
||||
unsigned int pause_quanta;
|
||||
unsigned int rx_sel_empty_threshold;
|
||||
unsigned int rx_sel_full_threshold;
|
||||
unsigned int tx_sel_empty_threshold;
|
||||
unsigned int tx_sel_full_threshold;
|
||||
unsigned int rx_almost_empty_threshold;
|
||||
unsigned int rx_almost_full_threshold;
|
||||
unsigned int tx_almost_empty_threshold;
|
||||
unsigned int tx_almost_full_threshold;
|
||||
unsigned int mdio_phy0_addr;
|
||||
unsigned int mdio_phy1_addr;
|
||||
|
||||
/* only if 100/1000 BaseX PCS, reserved otherwise */
|
||||
unsigned int reservedx44[5];
|
||||
|
||||
unsigned int reg_read_access_status;
|
||||
unsigned int min_tx_ipg_length;
|
||||
|
||||
/* IEEE 802.3 oEntity Managed Object Support */
|
||||
unsigned int aMACID_1; /*The MAC addresses */
|
||||
unsigned int aMACID_2;
|
||||
unsigned int aFramesTransmittedOK;
|
||||
unsigned int aFramesReceivedOK;
|
||||
unsigned int aFramesCheckSequenceErrors;
|
||||
unsigned int aAlignmentErrors;
|
||||
unsigned int aOctetsTransmittedOK;
|
||||
unsigned int aOctetsReceivedOK;
|
||||
|
||||
/* IEEE 802.3 oPausedEntity Managed Object Support */
|
||||
unsigned int aTxPAUSEMACCtrlFrames;
|
||||
unsigned int aRxPAUSEMACCtrlFrames;
|
||||
|
||||
/* IETF MIB (MIB-II) Object Support */
|
||||
unsigned int ifInErrors;
|
||||
unsigned int ifOutErrors;
|
||||
unsigned int ifInUcastPkts;
|
||||
unsigned int ifInMulticastPkts;
|
||||
unsigned int ifInBroadcastPkts;
|
||||
unsigned int ifOutDiscards;
|
||||
unsigned int ifOutUcastPkts;
|
||||
unsigned int ifOutMulticastPkts;
|
||||
unsigned int ifOutBroadcastPkts;
|
||||
|
||||
/* IETF RMON MIB Object Support */
|
||||
unsigned int etherStatsDropEvent;
|
||||
unsigned int etherStatsOctets;
|
||||
unsigned int etherStatsPkts;
|
||||
unsigned int etherStatsUndersizePkts;
|
||||
unsigned int etherStatsOversizePkts;
|
||||
unsigned int etherStatsPkts64Octets;
|
||||
unsigned int etherStatsPkts65to127Octets;
|
||||
unsigned int etherStatsPkts128to255Octets;
|
||||
unsigned int etherStatsPkts256to511Octets;
|
||||
unsigned int etherStatsPkts512to1023Octets;
|
||||
unsigned int etherStatsPkts1024to1518Octets;
|
||||
|
||||
unsigned int etherStatsPkts1519toXOctets;
|
||||
unsigned int etherStatsJabbers;
|
||||
unsigned int etherStatsFragments;
|
||||
|
||||
unsigned int reservedxE4;
|
||||
|
||||
/*FIFO control register. */
|
||||
alt_tse_tx_cmd_stat tx_cmd_stat;
|
||||
alt_tse_rx_cmd_stat rx_cmd_stat;
|
||||
|
||||
unsigned int ipaccTxConf;
|
||||
unsigned int ipaccRxConf;
|
||||
unsigned int ipaccRxStat;
|
||||
unsigned int ipaccRxStatSum;
|
||||
|
||||
/*Multicast address resolution table */
|
||||
unsigned int hash_table[64];
|
||||
|
||||
/*Registers 0 to 31 within PHY device 0/1 */
|
||||
struct alt_tse_mdio mdio_phy0;
|
||||
struct alt_tse_mdio mdio_phy1;
|
||||
|
||||
/*4 Supplemental MAC Addresses */
|
||||
unsigned int supp_mac_addr_0_0;
|
||||
unsigned int supp_mac_addr_0_1;
|
||||
unsigned int supp_mac_addr_1_0;
|
||||
unsigned int supp_mac_addr_1_1;
|
||||
unsigned int supp_mac_addr_2_0;
|
||||
unsigned int supp_mac_addr_2_1;
|
||||
unsigned int supp_mac_addr_3_0;
|
||||
unsigned int supp_mac_addr_3_1;
|
||||
|
||||
unsigned int reservedx320[56];
|
||||
};
|
||||
|
||||
/* flags: TSE MII modes */
|
||||
/* GMII/MII = 0 */
|
||||
/* RGMII = 1 */
|
||||
/* RGMII_ID = 2 */
|
||||
/* RGMII_TXID = 3 */
|
||||
/* RGMII_RXID = 4 */
|
||||
/* SGMII = 5 */
|
||||
struct altera_tse_priv {
|
||||
char devname[16];
|
||||
volatile struct alt_tse_mac *mac_dev;
|
||||
volatile struct alt_sgdma_registers *sgdma_rx;
|
||||
volatile struct alt_sgdma_registers *sgdma_tx;
|
||||
unsigned int rx_sgdma_irq;
|
||||
unsigned int tx_sgdma_irq;
|
||||
unsigned int has_descriptor_mem;
|
||||
unsigned int descriptor_mem_base;
|
||||
unsigned int descriptor_mem_size;
|
||||
volatile struct alt_sgdma_descriptor *rx_desc;
|
||||
volatile struct alt_sgdma_descriptor *tx_desc;
|
||||
volatile unsigned char *rx_buf;
|
||||
struct phy_info *phyinfo;
|
||||
unsigned int phyaddr;
|
||||
unsigned int flags;
|
||||
unsigned int link;
|
||||
unsigned int duplexity;
|
||||
unsigned int speed;
|
||||
};
|
||||
|
||||
/* Phy stuff continued */
|
||||
/*
|
||||
* struct phy_cmd: A command for reading or writing a PHY register
|
||||
*
|
||||
* mii_reg: The register to read or write
|
||||
*
|
||||
* mii_data: For writes, the value to put in the register.
|
||||
* A value of -1 indicates this is a read.
|
||||
*
|
||||
* funct: A function pointer which is invoked for each command.
|
||||
* For reads, this function will be passed the value read
|
||||
* from the PHY, and process it.
|
||||
* For writes, the result of this function will be written
|
||||
* to the PHY register
|
||||
*/
|
||||
struct phy_cmd {
|
||||
uint mii_reg;
|
||||
uint mii_data;
|
||||
uint(*funct) (uint mii_reg, struct altera_tse_priv *priv);
|
||||
};
|
||||
#endif /* _ALTERA_TSE_H_ */
|
@ -41,6 +41,8 @@ int board_eth_init(bd_t *bis);
|
||||
int cpu_eth_init(bd_t *bis);
|
||||
|
||||
/* Driver initialization prototypes */
|
||||
int altera_tse_initialize(u8 dev_num, int mac_base,
|
||||
int sgdma_rx_base, int sgdma_tx_base);
|
||||
int au1x00_enet_initialize(bd_t*);
|
||||
int at91emac_register(bd_t *bis, unsigned long iobase);
|
||||
int bfin_EMAC_initialize(bd_t *bis);
|
||||
|
Loading…
Reference in New Issue
Block a user