leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

rockchip: rk3399: add board_debug_uart_init()

Browse Source 
Use board_debug_uart_init() for UART iomux init instead of
do it in board_init_f, and move the function to soc file so
that we can find all the soc/board setting in soc file and
use a common board file for all rockchip SoCs later.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
This commit is contained in:
Kever Yang 2019-03-29 09:09:07 +08:00 committed by Philipp Tomsich
parent f9e8145614
commit c79bce16e5
2 changed files with 51 additions and 49 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

50
arch/arm/mach-rockchip/rk3399-board-spl.c
View File

@ -127,53 +127,6 @@ void secure_timer_init(void)
writel(TIMER_EN | TIMER_FMODE, TIMER_CHN10_BASE + TIMER_CONTROL_REG);
}
void board_debug_uart_init(void)
{
#define GRF_BASE 0xff770000
#define GPIO0_BASE 0xff720000
#define PMUGRF_BASE 0xff320000
struct rk3399_grf_regs * const grf = (void *)GRF_BASE;
#ifdef CONFIG_TARGET_CHROMEBOOK_BOB
struct rk3399_pmugrf_regs * const pmugrf = (void *)PMUGRF_BASE;
struct rockchip_gpio_regs * const gpio = (void *)GPIO0_BASE;
#endif
#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000)
/* Enable early UART0 on the RK3399 */
rk_clrsetreg(&grf->gpio2c_iomux,
GRF_GPIO2C0_SEL_MASK,
GRF_UART0BT_SIN << GRF_GPIO2C0_SEL_SHIFT);
rk_clrsetreg(&grf->gpio2c_iomux,
GRF_GPIO2C1_SEL_MASK,
GRF_UART0BT_SOUT << GRF_GPIO2C1_SEL_SHIFT);
#else
# ifdef CONFIG_TARGET_CHROMEBOOK_BOB
rk_setreg(&grf->io_vsel, 1 << 0);
/*
* Let's enable these power rails here, we are already running the SPI
* Flash based code.
*/
spl_gpio_output(gpio, GPIO(BANK_B, 2), 1); /* PP1500_EN */
spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 2), GPIO_PULL_NORMAL);
spl_gpio_output(gpio, GPIO(BANK_B, 4), 1); /* PP3000_EN */
spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 4), GPIO_PULL_NORMAL);
#endif /* CONFIG_TARGET_CHROMEBOOK_BOB */
/* Enable early UART2 channel C on the RK3399 */
rk_clrsetreg(&grf->gpio4c_iomux,
GRF_GPIO4C3_SEL_MASK,
GRF_UART2DGBC_SIN << GRF_GPIO4C3_SEL_SHIFT);
rk_clrsetreg(&grf->gpio4c_iomux,
GRF_GPIO4C4_SEL_MASK,
GRF_UART2DBGC_SOUT << GRF_GPIO4C4_SEL_SHIFT);
/* Set channel C as UART2 input */
rk_clrsetreg(&grf->soc_con7,
GRF_UART_DBG_SEL_MASK,
GRF_UART_DBG_SEL_C << GRF_UART_DBG_SEL_SHIFT);
#endif
}
void board_init_f(ulong dummy)
{
@ -183,8 +136,7 @@ void board_init_f(ulong dummy)
struct rk3399_grf_regs *grf;
int ret;
#define EARLY_UART
#ifdef EARLY_UART
#ifdef CONFIG_DEBUG_UART
debug_uart_init();
# ifdef CONFIG_TARGET_CHROMEBOOK_BOB

50
arch/arm/mach-rockchip/rk3399/rk3399.c
View File

@ -58,3 +58,53 @@ int arch_cpu_init(void)
return 0;
}
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
void board_debug_uart_init(void)
{
#define GRF_BASE 0xff770000
#define GPIO0_BASE 0xff720000
#define PMUGRF_BASE 0xff320000
struct rk3399_grf_regs * const grf = (void *)GRF_BASE;
#ifdef CONFIG_TARGET_CHROMEBOOK_BOB
struct rk3399_pmugrf_regs * const pmugrf = (void *)PMUGRF_BASE;
struct rockchip_gpio_regs * const gpio = (void *)GPIO0_BASE;
#endif
#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000)
/* Enable early UART0 on the RK3399 */
rk_clrsetreg(&grf->gpio2c_iomux,
GRF_GPIO2C0_SEL_MASK,
GRF_UART0BT_SIN << GRF_GPIO2C0_SEL_SHIFT);
rk_clrsetreg(&grf->gpio2c_iomux,
GRF_GPIO2C1_SEL_MASK,
GRF_UART0BT_SOUT << GRF_GPIO2C1_SEL_SHIFT);
#else
# ifdef CONFIG_TARGET_CHROMEBOOK_BOB
rk_setreg(&grf->io_vsel, 1 << 0);
/*
* Let's enable these power rails here, we are already running the SPI
* Flash based code.
*/
spl_gpio_output(gpio, GPIO(BANK_B, 2), 1); /* PP1500_EN */
spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 2), GPIO_PULL_NORMAL);
spl_gpio_output(gpio, GPIO(BANK_B, 4), 1); /* PP3000_EN */
spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 4), GPIO_PULL_NORMAL);
#endif /* CONFIG_TARGET_CHROMEBOOK_BOB */
/* Enable early UART2 channel C on the RK3399 */
rk_clrsetreg(&grf->gpio4c_iomux,
GRF_GPIO4C3_SEL_MASK,
GRF_UART2DGBC_SIN << GRF_GPIO4C3_SEL_SHIFT);
rk_clrsetreg(&grf->gpio4c_iomux,
GRF_GPIO4C4_SEL_MASK,
GRF_UART2DBGC_SOUT << GRF_GPIO4C4_SEL_SHIFT);
/* Set channel C as UART2 input */
rk_clrsetreg(&grf->soc_con7,
GRF_UART_DBG_SEL_MASK,
GRF_UART_DBG_SEL_C << GRF_UART_DBG_SEL_SHIFT);
#endif
}
#endif