leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

net: add Faraday FTMAC110 10/100Mbps ethernet support

Browse Source 
Faraday FTMAC110 10/100Mbps supports half-word data transfer for Linux.
However it has a weird DMA alignment issue:

(1) Tx DMA Buffer Address:
    1 bytes aligned: Invalid
    2 bytes aligned: O.K
    4 bytes aligned: O.K

(2) Rx DMA Buffer Address:
    1 bytes aligned: Invalid
    2 bytes aligned: O.K
    4 bytes aligned: Invalid!!!

Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Tom Rini <trini@ti.com>
This commit is contained in:
Kuo-Jung Su 2013-05-07 14:33:31 +08:00 committed by Joe Hershberger
parent 42a7cb50a9
commit c4775476d2
4 changed files with 652 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
drivers/net/Makefile
View File

@ -46,6 +46,7 @@ COBJS-$(CONFIG_ETHOC) += ethoc.o
COBJS-$(CONFIG_FEC_MXC) += fec_mxc.o
COBJS-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o
COBJS-$(CONFIG_FTGMAC100) += ftgmac100.o
COBJS-$(CONFIG_FTMAC110) += ftmac110.o
COBJS-$(CONFIG_FTMAC100) += ftmac100.o
COBJS-$(CONFIG_GRETH) += greth.o
COBJS-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o

473
drivers/net/ftmac110.c Normal file
View File

@ -0,0 +1,473 @@
/*
* Faraday 10/100Mbps Ethernet Controller
*
* (C) Copyright 2010 Faraday Technology
* Dante Su <dantesu@faraday-tech.com>
*
* This file is released under the terms of GPL v2 and any later version.
* See the file COPYING in the root directory of the source tree for details.
*/
#include <common.h>
#include <command.h>
#include <malloc.h>
#include <net.h>
#include <asm/errno.h>
#include <asm/io.h>
#include <asm/dma-mapping.h>
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
#include <miiphy.h>
#endif
#include "ftmac110.h"
#define CFG_RXDES_NUM 8
#define CFG_TXDES_NUM 2
#define CFG_XBUF_SIZE 1536
#define CFG_MDIORD_TIMEOUT (CONFIG_SYS_HZ >> 1) /* 500 ms */
#define CFG_MDIOWR_TIMEOUT (CONFIG_SYS_HZ >> 1) /* 500 ms */
#define CFG_LINKUP_TIMEOUT (CONFIG_SYS_HZ << 2) /* 4 sec */
/*
* FTMAC110 DMA design issue
*
* Its DMA engine has a weird restriction that its Rx DMA engine
* accepts only 16-bits aligned address, 32-bits aligned is not
* acceptable. However this restriction does not apply to Tx DMA.
*
* Conclusion:
* (1) Tx DMA Buffer Address:
* 1 bytes aligned: Invalid
* 2 bytes aligned: O.K
* 4 bytes aligned: O.K (-> u-boot ZeroCopy is possible)
* (2) Rx DMA Buffer Address:
* 1 bytes aligned: Invalid
* 2 bytes aligned: O.K
* 4 bytes aligned: Invalid
*/
struct ftmac110_chip {
void __iomem *regs;
uint32_t imr;
uint32_t maccr;
uint32_t lnkup;
uint32_t phy_addr;
struct ftmac110_rxd *rxd;
ulong rxd_dma;
uint32_t rxd_idx;
struct ftmac110_txd *txd;
ulong txd_dma;
uint32_t txd_idx;
};
static int ftmac110_reset(struct eth_device *dev);
static uint16_t mdio_read(struct eth_device *dev,
uint8_t phyaddr, uint8_t phyreg)
{
struct ftmac110_chip *chip = dev->priv;
struct ftmac110_regs __iomem *regs = chip->regs;
uint32_t tmp, ts;
uint16_t ret = 0xffff;
tmp = PHYCR_READ
| (phyaddr << PHYCR_ADDR_SHIFT)
| (phyreg << PHYCR_REG_SHIFT);
writel(tmp, &regs->phycr);
for (ts = get_timer(0); get_timer(ts) < CFG_MDIORD_TIMEOUT; ) {
tmp = readl(&regs->phycr);
if (tmp & PHYCR_READ)
continue;
break;
}
if (tmp & PHYCR_READ)
printf("ftmac110: mdio read timeout\n");
else
ret = (uint16_t)(tmp & 0xffff);
return ret;
}
static void mdio_write(struct eth_device *dev,
uint8_t phyaddr, uint8_t phyreg, uint16_t phydata)
{
struct ftmac110_chip *chip = dev->priv;
struct ftmac110_regs __iomem *regs = chip->regs;
uint32_t tmp, ts;
tmp = PHYCR_WRITE
| (phyaddr << PHYCR_ADDR_SHIFT)
| (phyreg << PHYCR_REG_SHIFT);
writel(phydata, &regs->phydr);
writel(tmp, &regs->phycr);
for (ts = get_timer(0); get_timer(ts) < CFG_MDIOWR_TIMEOUT; ) {
if (readl(&regs->phycr) & PHYCR_WRITE)
continue;
break;
}
if (readl(&regs->phycr) & PHYCR_WRITE)
printf("ftmac110: mdio write timeout\n");
}
static uint32_t ftmac110_phyqry(struct eth_device *dev)
{
ulong ts;
uint32_t maccr;
uint16_t pa, tmp, bmsr, bmcr;
struct ftmac110_chip *chip = dev->priv;
/* Default = 100Mbps Full */
maccr = MACCR_100M | MACCR_FD;
/* 1. find the phy device */
for (pa = 0; pa < 32; ++pa) {
tmp = mdio_read(dev, pa, MII_PHYSID1);
if (tmp == 0xFFFF || tmp == 0x0000)
continue;
chip->phy_addr = pa;
break;
}
if (pa >= 32) {
puts("ftmac110: phy device not found!\n");
goto exit;
}
/* 2. wait until link-up & auto-negotiation complete */
chip->lnkup = 0;
bmcr = mdio_read(dev, chip->phy_addr, MII_BMCR);
ts = get_timer(0);
do {
bmsr = mdio_read(dev, chip->phy_addr, MII_BMSR);
chip->lnkup = (bmsr & BMSR_LSTATUS) ? 1 : 0;
if (!chip->lnkup)
continue;
if (!(bmcr & BMCR_ANENABLE) || (bmsr & BMSR_ANEGCOMPLETE))
break;
} while (get_timer(ts) < CFG_LINKUP_TIMEOUT);
if (!chip->lnkup) {
puts("ftmac110: link down\n");
goto exit;
}
if (!(bmcr & BMCR_ANENABLE))
puts("ftmac110: auto negotiation disabled\n");
else if (!(bmsr & BMSR_ANEGCOMPLETE))
puts("ftmac110: auto negotiation timeout\n");
/* 3. derive MACCR */
if ((bmcr & BMCR_ANENABLE) && (bmsr & BMSR_ANEGCOMPLETE)) {
tmp = mdio_read(dev, chip->phy_addr, MII_ADVERTISE);
tmp &= mdio_read(dev, chip->phy_addr, MII_LPA);
if (tmp & LPA_100FULL) /* 100Mbps full-duplex */
maccr = MACCR_100M | MACCR_FD;
else if (tmp & LPA_100HALF) /* 100Mbps half-duplex */
maccr = MACCR_100M;
else if (tmp & LPA_10FULL) /* 10Mbps full-duplex */
maccr = MACCR_FD;
else if (tmp & LPA_10HALF) /* 10Mbps half-duplex */
maccr = 0;
} else {
if (bmcr & BMCR_SPEED100)
maccr = MACCR_100M;
else
maccr = 0;
if (bmcr & BMCR_FULLDPLX)
maccr |= MACCR_FD;
}
exit:
printf("ftmac110: %d Mbps, %s\n",
(maccr & MACCR_100M) ? 100 : 10,
(maccr & MACCR_FD) ? "Full" : "half");
return maccr;
}
static int ftmac110_reset(struct eth_device *dev)
{
uint8_t *a;
uint32_t i, maccr;
struct ftmac110_chip *chip = dev->priv;
struct ftmac110_regs __iomem *regs = chip->regs;
/* 1. MAC reset */
writel(MACCR_RESET, &regs->maccr);
for (i = get_timer(0); get_timer(i) < 1000; ) {
if (readl(&regs->maccr) & MACCR_RESET)
continue;
break;
}
if (readl(&regs->maccr) & MACCR_RESET) {
printf("ftmac110: reset failed\n");
return -ENXIO;
}
/* 1-1. Init tx ring */
for (i = 0; i < CFG_TXDES_NUM; ++i) {
/* owned by SW */
chip->txd[i].ct[0] = 0;
}
chip->txd_idx = 0;
/* 1-2. Init rx ring */
for (i = 0; i < CFG_RXDES_NUM; ++i) {
/* owned by HW */
chip->rxd[i].ct[0] = cpu_to_le32(FTMAC110_RXCT0_OWNER);
}
chip->rxd_idx = 0;
/* 2. PHY status query */
maccr = ftmac110_phyqry(dev);
/* 3. Fix up the MACCR value */
chip->maccr = maccr | MACCR_CRCAPD | MACCR_RXALL | MACCR_RXRUNT
| MACCR_RXEN | MACCR_TXEN | MACCR_RXDMAEN | MACCR_TXDMAEN;
/* 4. MAC address setup */
a = dev->enetaddr;
writel(a[1] | (a[0] << 8), &regs->mac[0]);
writel(a[5] | (a[4] << 8) | (a[3] << 16)
| (a[2] << 24), &regs->mac[1]);
/* 5. MAC registers setup */
writel(chip->rxd_dma, &regs->rxba);
writel(chip->txd_dma, &regs->txba);
/* interrupt at each tx/rx */
writel(ITC_DEFAULT, &regs->itc);
/* no tx pool, rx poll = 1 normal cycle */
writel(APTC_DEFAULT, &regs->aptc);
/* rx threshold = [6/8 fifo, 2/8 fifo] */
writel(DBLAC_DEFAULT, &regs->dblac);
/* disable & clear all interrupt status */
chip->imr = 0;
writel(ISR_ALL, &regs->isr);
writel(chip->imr, &regs->imr);
/* enable mac */
writel(chip->maccr, &regs->maccr);
return 0;
}
static int ftmac110_probe(struct eth_device *dev, bd_t *bis)
{
debug("ftmac110: probe\n");
if (ftmac110_reset(dev))
return -1;
return 0;
}
static void ftmac110_halt(struct eth_device *dev)
{
struct ftmac110_chip *chip = dev->priv;
struct ftmac110_regs __iomem *regs = chip->regs;
writel(0, &regs->imr);
writel(0, &regs->maccr);
debug("ftmac110: halt\n");
}
static int ftmac110_send(struct eth_device *dev, void *pkt, int len)
{
struct ftmac110_chip *chip = dev->priv;
struct ftmac110_regs __iomem *regs = chip->regs;
struct ftmac110_txd *des;
if (!chip->lnkup)
return 0;
if (len <= 0 || len > CFG_XBUF_SIZE) {
printf("ftmac110: bad tx pkt len(%d)\n", len);
return 0;
}
len = max(60, len);
des = &chip->txd[chip->txd_idx];
if (le32_to_cpu(des->ct[0]) & FTMAC110_TXCT0_OWNER) {
/* kick-off Tx DMA */
writel(0xffffffff, &regs->txpd);
printf("ftmac110: out of txd\n");
return 0;
}
memcpy(des->vbuf, (void *)pkt, len);
dma_map_single(des->vbuf, len, DMA_TO_DEVICE);
/* update len, fts and lts */
des->ct[1] &= cpu_to_le32(FTMAC110_TXCT1_END);
des->ct[1] |= cpu_to_le32(FTMAC110_TXCT1_LEN(len)
| FTMAC110_TXCT1_FTS | FTMAC110_TXCT1_LTS);
/* set owner bit and clear others */
des->ct[0] = cpu_to_le32(FTMAC110_TXCT0_OWNER);
/* kick-off Tx DMA */
writel(0xffffffff, &regs->txpd);
chip->txd_idx = (chip->txd_idx + 1) % CFG_TXDES_NUM;
return len;
}
static int ftmac110_recv(struct eth_device *dev)
{
struct ftmac110_chip *chip = dev->priv;
struct ftmac110_rxd *des;
uint32_t ct0, len, rlen = 0;
uint8_t *buf;
if (!chip->lnkup)
return 0;
do {
des = &chip->rxd[chip->rxd_idx];
ct0 = le32_to_cpu(des->ct[0]);
if (ct0 & FTMAC110_RXCT0_OWNER)
break;
len = FTMAC110_RXCT0_LEN(ct0);
buf = des->vbuf;
if (ct0 & FTMAC110_RXCT0_ERRMASK) {
printf("ftmac110: rx error\n");
} else {
dma_map_single(buf, len, DMA_FROM_DEVICE);
NetReceive(buf, len);
rlen += len;
}
/* owned by hardware */
des->ct[0] = cpu_to_le32(FTMAC110_RXCT0_OWNER);
chip->rxd_idx = (chip->rxd_idx + 1) % CFG_RXDES_NUM;
} while (0);
return rlen;
}
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
static int ftmac110_mdio_read(
const char *devname, uint8_t addr, uint8_t reg, uint16_t *value)
{
int ret = 0;
struct eth_device *dev;
dev = eth_get_dev_by_name(devname);
if (dev == NULL) {
printf("%s: no such device\n", devname);
ret = -1;
} else {
*value = mdio_read(dev, addr, reg);
}
return ret;
}
static int ftmac110_mdio_write(
const char *devname, uint8_t addr, uint8_t reg, uint16_t value)
{
int ret = 0;
struct eth_device *dev;
dev = eth_get_dev_by_name(devname);
if (dev == NULL) {
printf("%s: no such device\n", devname);
ret = -1;
} else {
mdio_write(dev, addr, reg, value);
}
return ret;
}
#endif /* #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) */
int ftmac110_initialize(bd_t *bis)
{
int i, card_nr = 0;
struct eth_device *dev;
struct ftmac110_chip *chip;
dev = malloc(sizeof(*dev) + sizeof(*chip));
if (dev == NULL) {
panic("ftmac110: out of memory 1\n");
return -1;
}
chip = (struct ftmac110_chip *)(dev + 1);
memset(dev, 0, sizeof(*dev) + sizeof(*chip));
sprintf(dev->name, "FTMAC110#%d", card_nr);
dev->iobase = CONFIG_FTMAC110_BASE;
chip->regs = (void __iomem *)dev->iobase;
dev->priv = chip;
dev->init = ftmac110_probe;
dev->halt = ftmac110_halt;
dev->send = ftmac110_send;
dev->recv = ftmac110_recv;
if (!eth_getenv_enetaddr_by_index("eth", card_nr, dev->enetaddr))
eth_random_enetaddr(dev->enetaddr);
/* allocate tx descriptors (it must be 16 bytes aligned) */
chip->txd = dma_alloc_coherent(
sizeof(struct ftmac110_txd) * CFG_TXDES_NUM, &chip->txd_dma);
if (!chip->txd)
panic("ftmac110: out of memory 3\n");
memset(chip->txd, 0,
sizeof(struct ftmac110_txd) * CFG_TXDES_NUM);
for (i = 0; i < CFG_TXDES_NUM; ++i) {
void *va = memalign(ARCH_DMA_MINALIGN, CFG_XBUF_SIZE);
if (!va)
panic("ftmac110: out of memory 4\n");
chip->txd[i].vbuf = va;
chip->txd[i].buf = cpu_to_le32(virt_to_phys(va));
chip->txd[i].ct[1] = 0;
chip->txd[i].ct[0] = 0; /* owned by SW */
}
chip->txd[i - 1].ct[1] |= cpu_to_le32(FTMAC110_TXCT1_END);
chip->txd_idx = 0;
/* allocate rx descriptors (it must be 16 bytes aligned) */
chip->rxd = dma_alloc_coherent(
sizeof(struct ftmac110_rxd) * CFG_RXDES_NUM, &chip->rxd_dma);
if (!chip->rxd)
panic("ftmac110: out of memory 4\n");
memset((void *)chip->rxd, 0,
sizeof(struct ftmac110_rxd) * CFG_RXDES_NUM);
for (i = 0; i < CFG_RXDES_NUM; ++i) {
void *va = memalign(ARCH_DMA_MINALIGN, CFG_XBUF_SIZE + 2);
if (!va)
panic("ftmac110: out of memory 5\n");
/* it needs to be exactly 2 bytes aligned */
va = ((uint8_t *)va + 2);
chip->rxd[i].vbuf = va;
chip->rxd[i].buf = cpu_to_le32(virt_to_phys(va));
chip->rxd[i].ct[1] = cpu_to_le32(CFG_XBUF_SIZE);
chip->rxd[i].ct[0] = cpu_to_le32(FTMAC110_RXCT0_OWNER);
}
chip->rxd[i - 1].ct[1] |= cpu_to_le32(FTMAC110_RXCT1_END);
chip->rxd_idx = 0;
eth_register(dev);
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
miiphy_register(dev->name, ftmac110_mdio_read, ftmac110_mdio_write);
#endif
card_nr++;
return card_nr;
}

177
drivers/net/ftmac110.h Normal file
View File

@ -0,0 +1,177 @@
/*
* Faraday 10/100Mbps Ethernet Controller
*
* (C) Copyright 2010 Faraday Technology
* Dante Su <dantesu@faraday-tech.com>
*
* This file is released under the terms of GPL v2 and any later version.
* See the file COPYING in the root directory of the source tree for details.
*/
#ifndef _FTMAC110_H
#define _FTMAC110_H
struct ftmac110_regs {
uint32_t isr; /* 0x00: Interrups Status Register */
uint32_t imr; /* 0x04: Interrupt Mask Register */
uint32_t mac[2]; /* 0x08: MAC Address */
uint32_t mht[2]; /* 0x10: Multicast Hash Table Register */
uint32_t txpd; /* 0x18: Tx Poll Demand Register */
uint32_t rxpd; /* 0x1c: Rx Poll Demand Register */
uint32_t txba; /* 0x20: Tx Ring Base Address Register */
uint32_t rxba; /* 0x24: Rx Ring Base Address Register */
uint32_t itc; /* 0x28: Interrupt Timer Control Register */
uint32_t aptc; /* 0x2C: Automatic Polling Timer Control Register */
uint32_t dblac; /* 0x30: DMA Burst Length&Arbitration Control */
uint32_t revr; /* 0x34: Revision Register */
uint32_t fear; /* 0x38: Feature Register */
uint32_t rsvd[19];
uint32_t maccr; /* 0x88: MAC Control Register */
uint32_t macsr; /* 0x8C: MAC Status Register */
uint32_t phycr; /* 0x90: PHY Control Register */
uint32_t phydr; /* 0x94: PHY Data Register */
uint32_t fcr; /* 0x98: Flow Control Register */
uint32_t bpr; /* 0x9C: Back Pressure Register */
};
/*
* Interrupt status/mask register(ISR/IMR) bits
*/
#define ISR_ALL 0x3ff
#define ISR_PHYSTCHG (1 << 9) /* phy status change */
#define ISR_AHBERR (1 << 8) /* bus error */
#define ISR_RXLOST (1 << 7) /* rx lost */
#define ISR_RXFIFO (1 << 6) /* rx to fifo */
#define ISR_TXLOST (1 << 5) /* tx lost */
#define ISR_TXOK (1 << 4) /* tx to ethernet */
#define ISR_NOTXBUF (1 << 3) /* out of tx buffer */
#define ISR_TXFIFO (1 << 2) /* tx to fifo */
#define ISR_NORXBUF (1 << 1) /* out of rx buffer */
#define ISR_RXOK (1 << 0) /* rx to buffer */
/*
* MACCR control bits
*/
#define MACCR_100M (1 << 18) /* 100Mbps mode */
#define MACCR_RXBCST (1 << 17) /* rx broadcast packet */
#define MACCR_RXMCST (1 << 16) /* rx multicast packet */
#define MACCR_FD (1 << 15) /* full duplex */
#define MACCR_CRCAPD (1 << 14) /* tx crc append */
#define MACCR_RXALL (1 << 12) /* rx all packets */
#define MACCR_RXFTL (1 << 11) /* rx packet even it's > 1518 byte */
#define MACCR_RXRUNT (1 << 10) /* rx packet even it's < 64 byte */
#define MACCR_RXMCSTHT (1 << 9) /* rx multicast hash table */
#define MACCR_RXEN (1 << 8) /* rx enable */
#define MACCR_RXINHDTX (1 << 6) /* rx in half duplex tx */
#define MACCR_TXEN (1 << 5) /* tx enable */
#define MACCR_CRCDIS (1 << 4) /* tx packet even it's crc error */
#define MACCR_LOOPBACK (1 << 3) /* loop-back */
#define MACCR_RESET (1 << 2) /* reset */
#define MACCR_RXDMAEN (1 << 1) /* rx dma enable */
#define MACCR_TXDMAEN (1 << 0) /* tx dma enable */
/*
* PHYCR control bits
*/
#define PHYCR_READ (1 << 26)
#define PHYCR_WRITE (1 << 27)
#define PHYCR_REG_SHIFT 21
#define PHYCR_ADDR_SHIFT 16
/*
* ITC control bits
*/
/* Tx Cycle Length */
#define ITC_TX_CYCLONG (1 << 15) /* 100Mbps=81.92us; 10Mbps=819.2us */
#define ITC_TX_CYCNORM (0 << 15) /* 100Mbps=5.12us; 10Mbps=51.2us */
/* Tx Threshold: Aggregate n interrupts as 1 interrupt */
#define ITC_TX_THR(n) (((n) & 0x7) << 12)
/* Tx Interrupt Timeout = n * Tx Cycle */
#define ITC_TX_ITMO(n) (((n) & 0xf) << 8)
/* Rx Cycle Length */
#define ITC_RX_CYCLONG (1 << 7) /* 100Mbps=81.92us; 10Mbps=819.2us */
#define ITC_RX_CYCNORM (0 << 7) /* 100Mbps=5.12us; 10Mbps=51.2us */
/* Rx Threshold: Aggregate n interrupts as 1 interrupt */
#define ITC_RX_THR(n) (((n) & 0x7) << 4)
/* Rx Interrupt Timeout = n * Rx Cycle */
#define ITC_RX_ITMO(n) (((n) & 0xf) << 0)
#define ITC_DEFAULT \
(ITC_TX_THR(1) | ITC_TX_ITMO(0) | ITC_RX_THR(1) | ITC_RX_ITMO(0))
/*
* APTC contrl bits
*/
/* Tx Cycle Length */
#define APTC_TX_CYCLONG (1 << 12) /* 100Mbps=81.92us; 10Mbps=819.2us */
#define APTC_TX_CYCNORM (0 << 12) /* 100Mbps=5.12us; 10Mbps=51.2us */
/* Tx Poll Timeout = n * Tx Cycle, 0=No auto polling */
#define APTC_TX_PTMO(n) (((n) & 0xf) << 8)
/* Rx Cycle Length */
#define APTC_RX_CYCLONG (1 << 4) /* 100Mbps=81.92us; 10Mbps=819.2us */
#define APTC_RX_CYCNORM (0 << 4) /* 100Mbps=5.12us; 10Mbps=51.2us */
/* Rx Poll Timeout = n * Rx Cycle, 0=No auto polling */
#define APTC_RX_PTMO(n) (((n) & 0xf) << 0)
#define APTC_DEFAULT (APTC_TX_PTMO(0) | APTC_RX_PTMO(1))
/*
* DBLAC contrl bits
*/
#define DBLAC_BURST_MAX_ANY (0 << 14) /* un-limited */
#define DBLAC_BURST_MAX_32X4 (2 << 14) /* max = 32 x 4 bytes */
#define DBLAC_BURST_MAX_64X4 (3 << 14) /* max = 64 x 4 bytes */
#define DBLAC_RXTHR_EN (1 << 9) /* enable rx threshold arbitration */
#define DBLAC_RXTHR_HIGH(n) (((n) & 0x7) << 6) /* upper bound = n/8 fifo */
#define DBLAC_RXTHR_LOW(n) (((n) & 0x7) << 3) /* lower bound = n/8 fifo */
#define DBLAC_BURST_CAP16 (1 << 2) /* support burst 16 */
#define DBLAC_BURST_CAP8 (1 << 1) /* support burst 8 */
#define DBLAC_BURST_CAP4 (1 << 0) /* support burst 4 */
#define DBLAC_DEFAULT \
(DBLAC_RXTHR_EN | DBLAC_RXTHR_HIGH(6) | DBLAC_RXTHR_LOW(2))
/*
* descriptor structure
*/
struct ftmac110_rxd {
uint32_t ct[2];
uint32_t buf;
void *vbuf; /* reserved */
};
#define FTMAC110_RXCT0_OWNER BIT_MASK(31) /* owner: 1=HW, 0=SW */
#define FTMAC110_RXCT0_FRS BIT_MASK(29) /* first pkt desc */
#define FTMAC110_RXCT0_LRS BIT_MASK(28) /* last pkt desc */
#define FTMAC110_RXCT0_ODDNB BIT_MASK(22) /* odd nibble */
#define FTMAC110_RXCT0_RUNT BIT_MASK(21) /* runt pkt */
#define FTMAC110_RXCT0_FTL BIT_MASK(20) /* frame too long */
#define FTMAC110_RXCT0_CRC BIT_MASK(19) /* pkt crc error */
#define FTMAC110_RXCT0_ERR BIT_MASK(18) /* bus error */
#define FTMAC110_RXCT0_ERRMASK (0x1f << 18) /* all errors */
#define FTMAC110_RXCT0_BCST BIT_MASK(17) /* Bcst pkt */
#define FTMAC110_RXCT0_MCST BIT_MASK(16) /* Mcst pkt */
#define FTMAC110_RXCT0_LEN(x) ((x) & 0x7ff)
#define FTMAC110_RXCT1_END BIT_MASK(31)
#define FTMAC110_RXCT1_BUFSZ(x) ((x) & 0x7ff)
struct ftmac110_txd {
uint32_t ct[2];
uint32_t buf;
void *vbuf; /* reserved */
};
#define FTMAC110_TXCT0_OWNER BIT_MASK(31) /* owner: 1=HW, 0=SW */
#define FTMAC110_TXCT0_COL 0x00000003 /* collision */
#define FTMAC110_TXCT1_END BIT_MASK(31) /* end of ring */
#define FTMAC110_TXCT1_TXIC BIT_MASK(30) /* tx done interrupt */
#define FTMAC110_TXCT1_TX2FIC BIT_MASK(29) /* tx fifo interrupt */
#define FTMAC110_TXCT1_FTS BIT_MASK(28) /* first pkt desc */
#define FTMAC110_TXCT1_LTS BIT_MASK(27) /* last pkt desc */
#define FTMAC110_TXCT1_LEN(x) ((x) & 0x7ff)
#endif /* FTMAC110_H */

1
include/netdev.h
View File

@ -67,6 +67,7 @@ int fecmxc_initialize(bd_t *bis);
int fecmxc_initialize_multi(bd_t *bis, int dev_id, int phy_id, uint32_t addr);
int ftgmac100_initialize(bd_t *bits);
int ftmac100_initialize(bd_t *bits);
int ftmac110_initialize(bd_t *bits);
int greth_initialize(bd_t *bis);
void gt6426x_eth_initialize(bd_t *bis);
int inca_switch_initialize(bd_t *bis);