ARMV7: Add support for Samsung ORIGEN board
Origen board is based upon S5PV310 SoC which is similiar to S5PC210 SoC. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
This commit is contained in:
Chander Kashyap
Albert ARIBAUD
parent
85776b0214
commit
b9a1ef219e
@ -707,6 +707,7 @@ Minkyu Kang <mk7.kang@samsung.com>
|
||||
|
||||
Chander Kashyap <k.chander@samsung.com>
|
||||
|
||||
origen ARM ARMV7 (S5PC210 SoC)
|
||||
SMDKV310 ARM ARMV7 (S5PC210 SoC)
|
||||
|
||||
Torsten Koschorrek <koschorrek@synertronixx.de>
|
||||
|
||||
46
board/samsung/origen/Makefile
Normal file
46
board/samsung/origen/Makefile
Normal file
@ -0,0 +1,46 @@
|
||||
#
|
||||
# Copyright (C) 2011 Samsung Electronics
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk
|
||||
|
||||
LIB = $(obj)lib$(BOARD).o
|
||||
|
||||
SOBJS := mem_setup.o
|
||||
SOBJS += lowlevel_init.o
|
||||
COBJS += origen.o
|
||||
|
||||
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
|
||||
|
||||
all: $(obj).depend $(LIB)
|
||||
|
||||
$(LIB): $(OBJS)
|
||||
$(AR) $(ARFLAGS) $@ $(OBJS)
|
||||
|
||||
#########################################################################
|
||||
|
||||
# defines $(obj).depend target
|
||||
include $(SRCTREE)/rules.mk
|
||||
|
||||
sinclude $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
357
board/samsung/origen/lowlevel_init.S
Normal file
357
board/samsung/origen/lowlevel_init.S
Normal file
@ -0,0 +1,357 @@
|
||||
/*
|
||||
* Lowlevel setup for ORIGEN board based on S5PV310
|
||||
*
|
||||
* Copyright (C) 2011 Samsung Electronics
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <config.h>
|
||||
#include <version.h>
|
||||
#include <asm/arch/cpu.h>
|
||||
#include "origen_setup.h"
|
||||
/*
|
||||
* Register usages:
|
||||
*
|
||||
* r5 has zero always
|
||||
* r7 has GPIO part1 base 0x11400000
|
||||
* r6 has GPIO part2 base 0x11000000
|
||||
*/
|
||||
|
||||
_TEXT_BASE:
|
||||
.word CONFIG_SYS_TEXT_BASE
|
||||
|
||||
.globl lowlevel_init
|
||||
lowlevel_init:
|
||||
push {lr}
|
||||
|
||||
/* r5 has always zero */
|
||||
mov r5, #0
|
||||
ldr r7, =S5PC210_GPIO_PART1_BASE
|
||||
ldr r6, =S5PC210_GPIO_PART2_BASE
|
||||
|
||||
/* check reset status */
|
||||
ldr r0, =(S5PC210_POWER_BASE + INFORM1_OFFSET)
|
||||
ldr r1, [r0]
|
||||
|
||||
/* AFTR wakeup reset */
|
||||
ldr r2, =S5P_CHECK_DIDLE
|
||||
cmp r1, r2
|
||||
beq exit_wakeup
|
||||
|
||||
/* LPA wakeup reset */
|
||||
ldr r2, =S5P_CHECK_LPA
|
||||
cmp r1, r2
|
||||
beq exit_wakeup
|
||||
|
||||
/* Sleep wakeup reset */
|
||||
ldr r2, =S5P_CHECK_SLEEP
|
||||
cmp r1, r2
|
||||
beq wakeup_reset
|
||||
|
||||
/*
|
||||
* If U-boot is already running in ram, no need to relocate U-Boot.
|
||||
* Memory controller must be configured before relocating U-Boot
|
||||
* in ram.
|
||||
*/
|
||||
ldr r0, =0x0ffffff /* r0 <- Mask Bits*/
|
||||
bic r1, pc, r0 /* pc <- current addr of code */
|
||||
/* r1 <- unmasked bits of pc */
|
||||
ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */
|
||||
bic r2, r2, r0 /* r2 <- unmasked bits of r2*/
|
||||
cmp r1, r2 /* compare r1, r2 */
|
||||
beq 1f /* r0 == r1 then skip sdram init */
|
||||
|
||||
/* init system clock */
|
||||
bl system_clock_init
|
||||
|
||||
/* Memory initialize */
|
||||
bl mem_ctrl_asm_init
|
||||
|
||||
1:
|
||||
/* for UART */
|
||||
bl uart_asm_init
|
||||
bl tzpc_init
|
||||
pop {pc}
|
||||
|
||||
wakeup_reset:
|
||||
bl system_clock_init
|
||||
bl mem_ctrl_asm_init
|
||||
bl tzpc_init
|
||||
|
||||
exit_wakeup:
|
||||
/* Load return address and jump to kernel */
|
||||
ldr r0, =(S5PC210_POWER_BASE + INFORM0_OFFSET)
|
||||
|
||||
/* r1 = physical address of s5pc210_cpu_resume function */
|
||||
ldr r1, [r0]
|
||||
|
||||
/* Jump to kernel*/
|
||||
mov pc, r1
|
||||
nop
|
||||
nop
|
||||
|
||||
/*
|
||||
* system_clock_init: Initialize core clock and bus clock.
|
||||
* void system_clock_init(void)
|
||||
*/
|
||||
system_clock_init:
|
||||
push {lr}
|
||||
ldr r0, =S5PC210_CLOCK_BASE
|
||||
|
||||
/* APLL(1), MPLL(1), CORE(0), HPM(0) */
|
||||
ldr r1, =CLK_SRC_CPU_VAL
|
||||
ldr r2, =CLK_SRC_CPU_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/* wait ?us */
|
||||
mov r1, #0x10000
|
||||
2: subs r1, r1, #1
|
||||
bne 2b
|
||||
|
||||
ldr r1, =CLK_SRC_TOP0_VAL
|
||||
ldr r2, =CLK_SRC_TOP0_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
ldr r1, =CLK_SRC_TOP1_VAL
|
||||
ldr r2, =CLK_SRC_TOP1_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/* DMC */
|
||||
ldr r1, =CLK_SRC_DMC_VAL
|
||||
ldr r2, =CLK_SRC_DMC_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/*CLK_SRC_LEFTBUS */
|
||||
ldr r1, =CLK_SRC_LEFTBUS_VAL
|
||||
ldr r2, =CLK_SRC_LEFTBUS_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/*CLK_SRC_RIGHTBUS */
|
||||
ldr r1, =CLK_SRC_RIGHTBUS_VAL
|
||||
ldr r2, =CLK_SRC_RIGHTBUS_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */
|
||||
ldr r1, =CLK_SRC_FSYS_VAL
|
||||
ldr r2, =CLK_SRC_FSYS_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/* UART[0:4] */
|
||||
ldr r1, =CLK_SRC_PERIL0_VAL
|
||||
ldr r2, =CLK_SRC_PERIL0_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/* wait ?us */
|
||||
mov r1, #0x10000
|
||||
3: subs r1, r1, #1
|
||||
bne 3b
|
||||
|
||||
/* CLK_DIV_CPU0 */
|
||||
ldr r1, =CLK_DIV_CPU0_VAL
|
||||
ldr r2, =CLK_DIV_CPU0_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/* CLK_DIV_CPU1 */
|
||||
ldr r1, =CLK_DIV_CPU1_VAL
|
||||
ldr r2, =CLK_DIV_CPU1_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/* CLK_DIV_DMC0 */
|
||||
ldr r1, =CLK_DIV_DMC0_VAL
|
||||
ldr r2, =CLK_DIV_DMC0_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/*CLK_DIV_DMC1 */
|
||||
ldr r1, =CLK_DIV_DMC1_VAL
|
||||
ldr r2, =CLK_DIV_DMC1_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/* CLK_DIV_LEFTBUS */
|
||||
ldr r1, =CLK_DIV_LEFTBUS_VAL
|
||||
ldr r2, =CLK_DIV_LEFTBUS_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/* CLK_DIV_RIGHTBUS */
|
||||
ldr r1, =CLK_DIV_RIGHTBUS_VAL
|
||||
ldr r2, =CLK_DIV_RIGHTBUS_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/* CLK_DIV_TOP */
|
||||
ldr r1, =CLK_DIV_TOP_VAL
|
||||
ldr r2, =CLK_DIV_TOP_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/* MMC[0:1] */
|
||||
ldr r1, =CLK_DIV_FSYS1_VAL /* 800(MPLL) / (15 + 1) */
|
||||
ldr r2, =CLK_DIV_FSYS1_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/* MMC[2:3] */
|
||||
ldr r1, =CLK_DIV_FSYS2_VAL /* 800(MPLL) / (15 + 1) */
|
||||
ldr r2, =CLK_DIV_FSYS2_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/* MMC4 */
|
||||
ldr r1, =CLK_DIV_FSYS3_VAL /* 800(MPLL) / (15 + 1) */
|
||||
ldr r2, =CLK_DIV_FSYS3_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/* CLK_DIV_PERIL0: UART Clock Divisors */
|
||||
ldr r1, =CLK_DIV_PERIL0_VAL
|
||||
ldr r2, =CLK_DIV_PERIL0_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/* Set PLL locktime */
|
||||
ldr r1, =PLL_LOCKTIME
|
||||
ldr r2, =APLL_LOCK_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
ldr r1, =PLL_LOCKTIME
|
||||
ldr r2, =MPLL_LOCK_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
ldr r1, =PLL_LOCKTIME
|
||||
ldr r2, =EPLL_LOCK_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
ldr r1, =PLL_LOCKTIME
|
||||
ldr r2, =VPLL_LOCK_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/* APLL_CON1 */
|
||||
ldr r1, =APLL_CON1_VAL
|
||||
ldr r2, =APLL_CON1_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/* APLL_CON0 */
|
||||
ldr r1, =APLL_CON0_VAL
|
||||
ldr r2, =APLL_CON0_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/* MPLL_CON1 */
|
||||
ldr r1, =MPLL_CON1_VAL
|
||||
ldr r2, =MPLL_CON1_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/* MPLL_CON0 */
|
||||
ldr r1, =MPLL_CON0_VAL
|
||||
ldr r2, =MPLL_CON0_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/* EPLL */
|
||||
ldr r1, =EPLL_CON1_VAL
|
||||
ldr r2, =EPLL_CON1_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/* EPLL_CON0 */
|
||||
ldr r1, =EPLL_CON0_VAL
|
||||
ldr r2, =EPLL_CON0_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/* VPLL_CON1 */
|
||||
ldr r1, =VPLL_CON1_VAL
|
||||
ldr r2, =VPLL_CON1_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/* VPLL_CON0 */
|
||||
ldr r1, =VPLL_CON0_VAL
|
||||
ldr r2, =VPLL_CON0_OFFSET
|
||||
str r1, [r0, r2]
|
||||
|
||||
/* wait ?us */
|
||||
mov r1, #0x30000
|
||||
4: subs r1, r1, #1
|
||||
bne 4b
|
||||
|
||||
pop {pc}
|
||||
/*
|
||||
* uart_asm_init: Initialize UART in asm mode, 115200bps fixed.
|
||||
* void uart_asm_init(void)
|
||||
*/
|
||||
.globl uart_asm_init
|
||||
uart_asm_init:
|
||||
|
||||
/* setup UART0-UART3 GPIOs (part1) */
|
||||
mov r0, r7
|
||||
ldr r1, =S5PC210_GPIO_A0_CON_VAL
|
||||
str r1, [r0, #S5PC210_GPIO_A0_CON_OFFSET]
|
||||
ldr r1, =S5PC210_GPIO_A1_CON_VAL
|
||||
str r1, [r0, #S5PC210_GPIO_A1_CON_OFFSET]
|
||||
|
||||
ldr r0, =S5PC210_UART_BASE
|
||||
add r0, r0, #S5PC210_DEFAULT_UART_OFFSET
|
||||
|
||||
ldr r1, =ULCON_VAL
|
||||
str r1, [r0, #ULCON_OFFSET]
|
||||
ldr r1, =UCON_VAL
|
||||
str r1, [r0, #UCON_OFFSET]
|
||||
ldr r1, =UFCON_VAL
|
||||
str r1, [r0, #UFCON_OFFSET]
|
||||
ldr r1, =UBRDIV_VAL
|
||||
str r1, [r0, #UBRDIV_OFFSET]
|
||||
ldr r1, =UFRACVAL_VAL
|
||||
str r1, [r0, #UFRACVAL_OFFSET]
|
||||
mov pc, lr
|
||||
nop
|
||||
nop
|
||||
nop
|
||||
|
||||
/* Setting TZPC[TrustZone Protection Controller] */
|
||||
tzpc_init:
|
||||
ldr r0, =TZPC0_BASE
|
||||
mov r1, #R0SIZE
|
||||
str r1, [r0]
|
||||
mov r1, #DECPROTXSET
|
||||
str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
|
||||
str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
|
||||
str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
|
||||
str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
|
||||
|
||||
ldr r0, =TZPC1_BASE
|
||||
str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
|
||||
str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
|
||||
str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
|
||||
str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
|
||||
|
||||
ldr r0, =TZPC2_BASE
|
||||
str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
|
||||
str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
|
||||
str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
|
||||
str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
|
||||
|
||||
ldr r0, =TZPC3_BASE
|
||||
str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
|
||||
str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
|
||||
str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
|
||||
str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
|
||||
|
||||
ldr r0, =TZPC4_BASE
|
||||
str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
|
||||
str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
|
||||
str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
|
||||
str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
|
||||
|
||||
ldr r0, =TZPC5_BASE
|
||||
str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
|
||||
str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
|
||||
str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
|
||||
str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
|
||||
|
||||
mov pc, lr
|
||||
421
board/samsung/origen/mem_setup.S
Normal file
421
board/samsung/origen/mem_setup.S
Normal file
@ -0,0 +1,421 @@
|
||||
/*
|
||||
* Memory setup for ORIGEN board based on S5PV310
|
||||
*
|
||||
* Copyright (C) 2011 Samsung Electronics
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <config.h>
|
||||
#include "origen_setup.h"
|
||||
#define SET_MIU
|
||||
|
||||
.globl mem_ctrl_asm_init
|
||||
mem_ctrl_asm_init:
|
||||
/*
|
||||
* Async bridge configuration at CPU_core:
|
||||
* 1: half_sync
|
||||
* 0: full_sync
|
||||
*/
|
||||
ldr r0, =ASYNC_CONFIG
|
||||
mov r1, #1
|
||||
str r1, [r0]
|
||||
|
||||
#ifdef SET_MIU
|
||||
ldr r0, =S5PC210_MIU_BASE
|
||||
/* Interleave: 2Bit, Interleave_bit1: 0x21, Interleave_bit2: 0x7 */
|
||||
ldr r1, =0x20001507
|
||||
str r1, [r0, #APB_SFR_INTERLEAVE_CONF_OFFSET]
|
||||
|
||||
/* Update MIU Configuration */
|
||||
ldr r1, =0x00000001
|
||||
str r1, [r0, #APB_SFR_ARBRITATION_CONF_OFFSET]
|
||||
#endif
|
||||
/* DREX0 */
|
||||
ldr r0, =S5PC210_DMC0_BASE
|
||||
|
||||
/*
|
||||
* DLL Parameter Setting:
|
||||
* Termination: Enable R/W
|
||||
* Phase Delay for DQS Cleaning: 180' Shift
|
||||
*/
|
||||
ldr r1, =0xe0000086
|
||||
str r1, [r0, #DMC_PHYCONTROL1]
|
||||
|
||||
/*
|
||||
* ZQ Calibration
|
||||
* Termination: Disable
|
||||
* Auto Calibration Start: Enable
|
||||
*/
|
||||
ldr r1, =0xE3855703
|
||||
str r1, [r0, #DMC_PHYZQCONTROL]
|
||||
|
||||
/* Wait ?us*/
|
||||
mov r2, #0x100000
|
||||
1: subs r2, r2, #1
|
||||
bne 1b
|
||||
|
||||
/*
|
||||
* Update DLL Information:
|
||||
* Force DLL Resyncronization
|
||||
*/
|
||||
ldr r1, =0xe000008e
|
||||
str r1, [r0, #DMC_PHYCONTROL1]
|
||||
|
||||
/* Reset Force DLL Resyncronization */
|
||||
ldr r1, =0xe0000086
|
||||
str r1, [r0, #DMC_PHYCONTROL1]
|
||||
|
||||
/* Enable Differential DQS, DLL Off*/
|
||||
ldr r1, =0x71101008
|
||||
str r1, [r0, #DMC_PHYCONTROL0]
|
||||
|
||||
/* Activate PHY DLL: DLL On */
|
||||
ldr r1, =0x7110100A
|
||||
str r1, [r0, #DMC_PHYCONTROL0]
|
||||
|
||||
/* Set DLL Parameters */
|
||||
ldr r1, =0xe0000086
|
||||
str r1, [r0, #DMC_PHYCONTROL1]
|
||||
|
||||
/* DLL Start */
|
||||
ldr r1, =0x7110100B
|
||||
str r1, [r0, #DMC_PHYCONTROL0]
|
||||
|
||||
ldr r1, =0x00000000
|
||||
str r1, [r0, #DMC_PHYCONTROL2]
|
||||
|
||||
/* Set Clock Ratio of Bus clock to Memory Clock */
|
||||
ldr r1, =0x0FFF301a
|
||||
str r1, [r0, #DMC_CONCONTROL]
|
||||
|
||||
/*
|
||||
* Memor Burst length: 8
|
||||
* Number of chips: 2
|
||||
* Memory Bus width: 32 bit
|
||||
* Memory Type: DDR3
|
||||
* Additional Latancy for PLL: 1 Cycle
|
||||
*/
|
||||
ldr r1, =0x00312640
|
||||
str r1, [r0, #DMC_MEMCONTROL]
|
||||
|
||||
/*
|
||||
* Memory Configuration Chip 0
|
||||
* Address Mapping: Interleaved
|
||||
* Number of Column address Bits: 10 bits
|
||||
* Number of Rows Address Bits: 14
|
||||
* Number of Banks: 8
|
||||
*/
|
||||
ldr r1, =0x20e01323
|
||||
str r1, [r0, #DMC_MEMCONFIG0]
|
||||
|
||||
/*
|
||||
* Memory Configuration Chip 1
|
||||
* Address Mapping: Interleaved
|
||||
* Number of Column address Bits: 10 bits
|
||||
* Number of Rows Address Bits: 14
|
||||
* Number of Banks: 8
|
||||
*/
|
||||
ldr r1, =0x40e01323
|
||||
str r1, [r0, #DMC_MEMCONFIG1]
|
||||
|
||||
/* Config Precharge Policy */
|
||||
ldr r1, =0xff000000
|
||||
str r1, [r0, #DMC_PRECHCONFIG]
|
||||
|
||||
/*
|
||||
* TimingAref, TimingRow, TimingData, TimingPower Setting:
|
||||
* Values as per Memory AC Parameters
|
||||
*/
|
||||
ldr r1, =0x000000BB
|
||||
str r1, [r0, #DMC_TIMINGAREF]
|
||||
ldr r1, =0x4046654f
|
||||
str r1, [r0, #DMC_TIMINGROW]
|
||||
ldr r1, =0x46400506
|
||||
str r1, [r0, #DMC_TIMINGDATA]
|
||||
ldr r1, =0x52000A3C
|
||||
str r1, [r0, #DMC_TIMINGPOWER]
|
||||
|
||||
/* Chip0: NOP Command: Assert and Hold CKE to high level */
|
||||
ldr r1, =0x07000000
|
||||
str r1, [r0, #DMC_DIRECTCMD]
|
||||
|
||||
/* Wait ?us*/
|
||||
mov r2, #0x100000
|
||||
2: subs r2, r2, #1
|
||||
bne 2b
|
||||
|
||||
/* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
|
||||
ldr r1, =0x00020000
|
||||
str r1, [r0, #DMC_DIRECTCMD]
|
||||
ldr r1, =0x00030000
|
||||
str r1, [r0, #DMC_DIRECTCMD]
|
||||
ldr r1, =0x00010002
|
||||
str r1, [r0, #DMC_DIRECTCMD]
|
||||
ldr r1, =0x00000328
|
||||
str r1, [r0, #DMC_DIRECTCMD]
|
||||
|
||||
/* Wait ?us*/
|
||||
mov r2, #0x100000
|
||||
3: subs r2, r2, #1
|
||||
bne 3b
|
||||
|
||||
/* Chip0: ZQINIT */
|
||||
ldr r1, =0x0a000000
|
||||
str r1, [r0, #DMC_DIRECTCMD]
|
||||
|
||||
/* Wait ?us*/
|
||||
mov r2, #0x100000
|
||||
4: subs r2, r2, #1
|
||||
bne 4b
|
||||
|
||||
/* Chip1: NOP Command: Assert and Hold CKE to high level */
|
||||
ldr r1, =0x07100000
|
||||
str r1, [r0, #DMC_DIRECTCMD]
|
||||
|
||||
/* Wait ?us*/
|
||||
mov r2, #0x100000
|
||||
5: subs r2, r2, #1
|
||||
bne 5b
|
||||
|
||||
/* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
|
||||
ldr r1, =0x00120000
|
||||
str r1, [r0, #DMC_DIRECTCMD]
|
||||
ldr r1, =0x00130000
|
||||
str r1, [r0, #DMC_DIRECTCMD]
|
||||
ldr r1, =0x00110002
|
||||
str r1, [r0, #DMC_DIRECTCMD]
|
||||
ldr r1, =0x00100328
|
||||
str r1, [r0, #DMC_DIRECTCMD]
|
||||
|
||||
/* Wait ?us*/
|
||||
mov r2, #0x100000
|
||||
6: subs r2, r2, #1
|
||||
bne 6b
|
||||
|
||||
/* Chip1: ZQINIT */
|
||||
ldr r1, =0x0a100000
|
||||
str r1, [r0, #DMC_DIRECTCMD]
|
||||
|
||||
/* Wait ?us*/
|
||||
mov r2, #0x100000
|
||||
7: subs r2, r2, #1
|
||||
bne 7b
|
||||
|
||||
ldr r1, =0xe000008e
|
||||
str r1, [r0, #DMC_PHYCONTROL1]
|
||||
ldr r1, =0xe0000086
|
||||
str r1, [r0, #DMC_PHYCONTROL1]
|
||||
|
||||
/* Wait ?us*/
|
||||
mov r2, #0x100000
|
||||
8: subs r2, r2, #1
|
||||
bne 8b
|
||||
|
||||
/* DREX1 */
|
||||
ldr r0, =S5PC210_DMC1_BASE @0x10410000
|
||||
|
||||
/*
|
||||
* DLL Parameter Setting:
|
||||
* Termination: Enable R/W
|
||||
* Phase Delay for DQS Cleaning: 180' Shift
|
||||
*/
|
||||
ldr r1, =0xe0000086
|
||||
str r1, [r0, #DMC_PHYCONTROL1]
|
||||
|
||||
/*
|
||||
* ZQ Calibration:
|
||||
* Termination: Disable
|
||||
* Auto Calibration Start: Enable
|
||||
*/
|
||||
ldr r1, =0xE3855703
|
||||
str r1, [r0, #DMC_PHYZQCONTROL]
|
||||
|
||||
/* Wait ?us*/
|
||||
mov r2, #0x100000
|
||||
1: subs r2, r2, #1
|
||||
bne 1b
|
||||
|
||||
/*
|
||||
* Update DLL Information:
|
||||
* Force DLL Resyncronization
|
||||
*/
|
||||
ldr r1, =0xe000008e
|
||||
str r1, [r0, #DMC_PHYCONTROL1]
|
||||
|
||||
/* Reset Force DLL Resyncronization */
|
||||
ldr r1, =0xe0000086
|
||||
str r1, [r0, #DMC_PHYCONTROL1]
|
||||
|
||||
/* Enable Differential DQS, DLL Off*/
|
||||
ldr r1, =0x71101008
|
||||
str r1, [r0, #DMC_PHYCONTROL0]
|
||||
|
||||
/* Activate PHY DLL: DLL On */
|
||||
ldr r1, =0x7110100A
|
||||
str r1, [r0, #DMC_PHYCONTROL0]
|
||||
|
||||
/* Set DLL Parameters */
|
||||
ldr r1, =0xe0000086
|
||||
str r1, [r0, #DMC_PHYCONTROL1]
|
||||
|
||||
/* DLL Start */
|
||||
ldr r1, =0x7110100B
|
||||
str r1, [r0, #DMC_PHYCONTROL0]
|
||||
|
||||
ldr r1, =0x00000000
|
||||
str r1, [r0, #DMC_PHYCONTROL2]
|
||||
|
||||
/* Set Clock Ratio of Bus clock to Memory Clock */
|
||||
ldr r1, =0x0FFF301a
|
||||
str r1, [r0, #DMC_CONCONTROL]
|
||||
|
||||
/*
|
||||
* Memor Burst length: 8
|
||||
* Number of chips: 2
|
||||
* Memory Bus width: 32 bit
|
||||
* Memory Type: DDR3
|
||||
* Additional Latancy for PLL: 1 Cycle
|
||||
*/
|
||||
ldr r1, =0x00312640
|
||||
str r1, [r0, #DMC_MEMCONTROL]
|
||||
|
||||
/*
|
||||
* Memory Configuration Chip 0
|
||||
* Address Mapping: Interleaved
|
||||
* Number of Column address Bits: 10 bits
|
||||
* Number of Rows Address Bits: 14
|
||||
* Number of Banks: 8
|
||||
*/
|
||||
ldr r1, =0x20e01323
|
||||
str r1, [r0, #DMC_MEMCONFIG0]
|
||||
|
||||
/*
|
||||
* Memory Configuration Chip 1
|
||||
* Address Mapping: Interleaved
|
||||
* Number of Column address Bits: 10 bits
|
||||
* Number of Rows Address Bits: 14
|
||||
* Number of Banks: 8
|
||||
*/
|
||||
ldr r1, =0x40e01323
|
||||
str r1, [r0, #DMC_MEMCONFIG1]
|
||||
|
||||
/* Config Precharge Policy */
|
||||
ldr r1, =0xff000000
|
||||
str r1, [r0, #DMC_PRECHCONFIG]
|
||||
|
||||
/*
|
||||
* TimingAref, TimingRow, TimingData, TimingPower Setting:
|
||||
* Values as per Memory AC Parameters
|
||||
*/
|
||||
ldr r1, =0x000000BB
|
||||
str r1, [r0, #DMC_TIMINGAREF]
|
||||
ldr r1, =0x4046654f
|
||||
str r1, [r0, #DMC_TIMINGROW]
|
||||
ldr r1, =0x46400506
|
||||
str r1, [r0, #DMC_TIMINGDATA]
|
||||
ldr r1, =0x52000A3C
|
||||
str r1, [r0, #DMC_TIMINGPOWER]
|
||||
|
||||
/* Chip0: NOP Command: Assert and Hold CKE to high level */
|
||||
ldr r1, =0x07000000
|
||||
str r1, [r0, #DMC_DIRECTCMD]
|
||||
|
||||
/* Wait ?us*/
|
||||
mov r2, #0x100000
|
||||
2: subs r2, r2, #1
|
||||
bne 2b
|
||||
|
||||
/* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
|
||||
ldr r1, =0x00020000
|
||||
str r1, [r0, #DMC_DIRECTCMD]
|
||||
ldr r1, =0x00030000
|
||||
str r1, [r0, #DMC_DIRECTCMD]
|
||||
ldr r1, =0x00010002
|
||||
str r1, [r0, #DMC_DIRECTCMD]
|
||||
ldr r1, =0x00000328
|
||||
str r1, [r0, #DMC_DIRECTCMD]
|
||||
|
||||
/* Wait ?us*/
|
||||
mov r2, #0x100000
|
||||
3: subs r2, r2, #1
|
||||
bne 3b
|
||||
|
||||
/* Chip 0: ZQINIT */
|
||||
ldr r1, =0x0a000000
|
||||
str r1, [r0, #DMC_DIRECTCMD]
|
||||
|
||||
/* Wait ?us*/
|
||||
mov r2, #0x100000
|
||||
4: subs r2, r2, #1
|
||||
bne 4b
|
||||
|
||||
/* Chip1: NOP Command: Assert and Hold CKE to high level */
|
||||
ldr r1, =0x07100000
|
||||
str r1, [r0, #DMC_DIRECTCMD]
|
||||
|
||||
/* Wait ?us*/
|
||||
mov r2, #0x100000
|
||||
5: subs r2, r2, #1
|
||||
bne 5b
|
||||
|
||||
/* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
|
||||
ldr r1, =0x00120000
|
||||
str r1, [r0, #DMC_DIRECTCMD]
|
||||
ldr r1, =0x00130000
|
||||
str r1, [r0, #DMC_DIRECTCMD]
|
||||
ldr r1, =0x00110002
|
||||
str r1, [r0, #DMC_DIRECTCMD]
|
||||
ldr r1, =0x00100328
|
||||
str r1, [r0, #DMC_DIRECTCMD]
|
||||
|
||||
/* Wait ?us*/
|
||||
mov r2, #0x100000
|
||||
6: subs r2, r2, #1
|
||||
bne 6b
|
||||
|
||||
/* Chip1: ZQINIT */
|
||||
ldr r1, =0x0a100000
|
||||
str r1, [r0, #DMC_DIRECTCMD]
|
||||
|
||||
/* Wait ?us*/
|
||||
mov r2, #0x100000
|
||||
7: subs r2, r2, #1
|
||||
bne 7b
|
||||
|
||||
ldr r1, =0xe000008e
|
||||
str r1, [r0, #DMC_PHYCONTROL1]
|
||||
ldr r1, =0xe0000086
|
||||
str r1, [r0, #DMC_PHYCONTROL1]
|
||||
|
||||
/* Wait ?us*/
|
||||
mov r2, #0x100000
|
||||
8: subs r2, r2, #1
|
||||
bne 8b
|
||||
|
||||
/* turn on DREX0, DREX1 */
|
||||
ldr r0, =S5PC210_DMC0_BASE
|
||||
ldr r1, =0x0FFF303a
|
||||
str r1, [r0, #DMC_CONCONTROL]
|
||||
|
||||
ldr r0, =S5PC210_DMC1_BASE
|
||||
ldr r1, =0x0FFF303a
|
||||
str r1, [r0, #DMC_CONCONTROL]
|
||||
|
||||
mov pc, lr
|
||||
109
board/samsung/origen/origen.c
Normal file
109
board/samsung/origen/origen.c
Normal file
@ -0,0 +1,109 @@
|
||||
/*
|
||||
* Copyright (C) 2011 Samsung Electronics
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/cpu.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
#include <asm/arch/mmc.h>
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
struct s5pc210_gpio_part1 *gpio1;
|
||||
struct s5pc210_gpio_part2 *gpio2;
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE;
|
||||
gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE;
|
||||
|
||||
gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
|
||||
return 0;
|
||||
}
|
||||
|
||||
int dram_init(void)
|
||||
{
|
||||
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)
|
||||
+ get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE)
|
||||
+ get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE)
|
||||
+ get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void dram_init_banksize(void)
|
||||
{
|
||||
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
|
||||
gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, \
|
||||
PHYS_SDRAM_1_SIZE);
|
||||
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
|
||||
gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2, \
|
||||
PHYS_SDRAM_2_SIZE);
|
||||
gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
|
||||
gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3, \
|
||||
PHYS_SDRAM_3_SIZE);
|
||||
gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
|
||||
gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4, \
|
||||
PHYS_SDRAM_4_SIZE);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_DISPLAY_BOARDINFO
|
||||
int checkboard(void)
|
||||
{
|
||||
printf("\nBoard: ORIGEN\n");
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_GENERIC_MMC
|
||||
int board_mmc_init(bd_t *bis)
|
||||
{
|
||||
int i, err;
|
||||
|
||||
/*
|
||||
* MMC2 SD card GPIO:
|
||||
*
|
||||
* GPK2[0] SD_2_CLK(2)
|
||||
* GPK2[1] SD_2_CMD(2)
|
||||
* GPK2[2] SD_2_CDn
|
||||
* GPK2[3:6] SD_2_DATA[0:3](2)
|
||||
*/
|
||||
for (i = 0; i < 7; i++) {
|
||||
/* GPK2[0:6] special function 2 */
|
||||
s5p_gpio_cfg_pin(&gpio2->k2, i, GPIO_FUNC(0x2));
|
||||
|
||||
/* GPK2[0:6] drv 4x */
|
||||
s5p_gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
|
||||
|
||||
/* GPK2[0:1] pull disable */
|
||||
if (i == 0 || i == 1) {
|
||||
s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
|
||||
continue;
|
||||
}
|
||||
|
||||
/* GPK2[2:6] pull up */
|
||||
s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_UP);
|
||||
}
|
||||
|
||||
err = s5p_mmc_init(2, 4);
|
||||
return err;
|
||||
}
|
||||
#endif
|
||||
546
board/samsung/origen/origen_setup.h
Normal file
546
board/samsung/origen/origen_setup.h
Normal file
@ -0,0 +1,546 @@
|
||||
/*
|
||||
* Machine Specific Values for ORIGEN board based on S5PV310
|
||||
*
|
||||
* Copyright (C) 2011 Samsung Electronics
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#ifndef _ORIGEN_SETUP_H
|
||||
#define _ORIGEN_SETUP_H
|
||||
|
||||
#include <config.h>
|
||||
#include <version.h>
|
||||
#include <asm/arch/cpu.h>
|
||||
|
||||
/* Offsets of clock registers (sources and dividers) */
|
||||
#define CLK_SRC_CPU_OFFSET 0x14200
|
||||
#define CLK_DIV_CPU0_OFFSET 0x14500
|
||||
#define CLK_DIV_CPU1_OFFSET 0x14504
|
||||
|
||||
#define CLK_SRC_DMC_OFFSET 0x10200
|
||||
#define CLK_DIV_DMC0_OFFSET 0x10500
|
||||
#define CLK_DIV_DMC1_OFFSET 0x10504
|
||||
|
||||
#define CLK_SRC_TOP0_OFFSET 0xC210
|
||||
#define CLK_SRC_TOP1_OFFSET 0xC214
|
||||
#define CLK_DIV_TOP_OFFSET 0xC510
|
||||
|
||||
#define CLK_SRC_LEFTBUS_OFFSET 0x4200
|
||||
#define CLK_DIV_LEFTBUS_OFFSET 0x4500
|
||||
|
||||
#define CLK_SRC_RIGHTBUS_OFFSET 0x8200
|
||||
#define CLK_DIV_RIGHTBUS_OFFSET 0x8500
|
||||
|
||||
#define CLK_SRC_FSYS_OFFSET 0xC240
|
||||
#define CLK_DIV_FSYS1_OFFSET 0xC544
|
||||
#define CLK_DIV_FSYS2_OFFSET 0xC548
|
||||
#define CLK_DIV_FSYS3_OFFSET 0xC54C
|
||||
|
||||
#define CLK_SRC_PERIL0_OFFSET 0xC250
|
||||
#define CLK_DIV_PERIL0_OFFSET 0xC550
|
||||
|
||||
#define APLL_LOCK_OFFSET 0x14000
|
||||
#define MPLL_LOCK_OFFSET 0x14008
|
||||
#define APLL_CON0_OFFSET 0x14100
|
||||
#define APLL_CON1_OFFSET 0x14104
|
||||
#define MPLL_CON0_OFFSET 0x14108
|
||||
#define MPLL_CON1_OFFSET 0x1410C
|
||||
|
||||
#define EPLL_LOCK_OFFSET 0xC010
|
||||
#define VPLL_LOCK_OFFSET 0xC020
|
||||
#define EPLL_CON0_OFFSET 0xC110
|
||||
#define EPLL_CON1_OFFSET 0xC114
|
||||
#define VPLL_CON0_OFFSET 0xC120
|
||||
#define VPLL_CON1_OFFSET 0xC124
|
||||
|
||||
/* DMC: DRAM Controllor Register offsets */
|
||||
#define DMC_CONCONTROL 0x00
|
||||
#define DMC_MEMCONTROL 0x04
|
||||
#define DMC_MEMCONFIG0 0x08
|
||||
#define DMC_MEMCONFIG1 0x0C
|
||||
#define DMC_DIRECTCMD 0x10
|
||||
#define DMC_PRECHCONFIG 0x14
|
||||
#define DMC_PHYCONTROL0 0x18
|
||||
#define DMC_PHYCONTROL1 0x1C
|
||||
#define DMC_PHYCONTROL2 0x20
|
||||
#define DMC_TIMINGAREF 0x30
|
||||
#define DMC_TIMINGROW 0x34
|
||||
#define DMC_TIMINGDATA 0x38
|
||||
#define DMC_TIMINGPOWER 0x3C
|
||||
#define DMC_PHYZQCONTROL 0x44
|
||||
|
||||
/* Bus Configuration Register Address */
|
||||
#define ASYNC_CONFIG 0x10010350
|
||||
|
||||
/* MIU Config Register Offsets*/
|
||||
#define APB_SFR_INTERLEAVE_CONF_OFFSET 0x400
|
||||
#define APB_SFR_ARBRITATION_CONF_OFFSET 0xC00
|
||||
|
||||
/* Offset for inform registers */
|
||||
#define INFORM0_OFFSET 0x800
|
||||
#define INFORM1_OFFSET 0x804
|
||||
|
||||
/* GPIO Offsets for UART: GPIO Contol Register */
|
||||
#define S5PC210_GPIO_A0_CON_OFFSET 0x00
|
||||
#define S5PC210_GPIO_A1_CON_OFFSET 0x20
|
||||
|
||||
/* UART Register offsets */
|
||||
#define ULCON_OFFSET 0x00
|
||||
#define UCON_OFFSET 0x04
|
||||
#define UFCON_OFFSET 0x08
|
||||
#define UBRDIV_OFFSET 0x28
|
||||
#define UFRACVAL_OFFSET 0x2C
|
||||
|
||||
/* TZPC : Register Offsets */
|
||||
#define TZPC0_BASE 0x10110000
|
||||
#define TZPC1_BASE 0x10120000
|
||||
#define TZPC2_BASE 0x10130000
|
||||
#define TZPC3_BASE 0x10140000
|
||||
#define TZPC4_BASE 0x10150000
|
||||
#define TZPC5_BASE 0x10160000
|
||||
|
||||
#define TZPC_DECPROT0SET_OFFSET 0x804
|
||||
#define TZPC_DECPROT1SET_OFFSET 0x810
|
||||
#define TZPC_DECPROT2SET_OFFSET 0x81C
|
||||
#define TZPC_DECPROT3SET_OFFSET 0x828
|
||||
|
||||
/* CLK_SRC_CPU */
|
||||
#define MUX_HPM_SEL_MOUTAPLL 0x0
|
||||
#define MUX_HPM_SEL_SCLKMPLL 0x1
|
||||
#define MUX_CORE_SEL_MOUTAPLL 0x0
|
||||
#define MUX_CORE_SEL_SCLKMPLL 0x1
|
||||
#define MUX_MPLL_SEL_FILPLL 0x0
|
||||
#define MUX_MPLL_SEL_MOUTMPLLFOUT 0x1
|
||||
#define MUX_APLL_SEL_FILPLL 0x0
|
||||
#define MUX_APLL_SEL_MOUTMPLLFOUT 0x1
|
||||
#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL_MOUTAPLL << 20) \
|
||||
| (MUX_CORE_SEL_MOUTAPLL << 16) \
|
||||
| (MUX_MPLL_SEL_MOUTMPLLFOUT << 8)\
|
||||
| (MUX_APLL_SEL_MOUTMPLLFOUT << 0))
|
||||
|
||||
/* CLK_DIV_CPU0 */
|
||||
#define APLL_RATIO 0x0
|
||||
#define PCLK_DBG_RATIO 0x1
|
||||
#define ATB_RATIO 0x3
|
||||
#define PERIPH_RATIO 0x3
|
||||
#define COREM1_RATIO 0x7
|
||||
#define COREM0_RATIO 0x3
|
||||
#define CORE_RATIO 0x0
|
||||
#define CLK_DIV_CPU0_VAL ((APLL_RATIO << 24) \
|
||||
| (PCLK_DBG_RATIO << 20) \
|
||||
| (ATB_RATIO << 16) \
|
||||
| (PERIPH_RATIO << 12) \
|
||||
| (COREM1_RATIO << 8) \
|
||||
| (COREM0_RATIO << 4) \
|
||||
| (CORE_RATIO << 0))
|
||||
|
||||
/* CLK_DIV_CPU1 */
|
||||
#define HPM_RATIO 0x0
|
||||
#define COPY_RATIO 0x3
|
||||
#define CLK_DIV_CPU1_VAL ((HPM_RATIO << 4) | (COPY_RATIO))
|
||||
|
||||
/* CLK_SRC_DMC */
|
||||
#define MUX_PWI_SEL_XXTI 0x0
|
||||
#define MUX_PWI_SEL_XUSBXTI 0x1
|
||||
#define MUX_PWI_SEL_SCLK_HDMI24M 0x2
|
||||
#define MUX_PWI_SEL_SCLK_USBPHY0 0x3
|
||||
#define MUX_PWI_SEL_SCLK_USBPHY1 0x4
|
||||
#define MUX_PWI_SEL_SCLK_HDMIPHY 0x5
|
||||
#define MUX_PWI_SEL_SCLKMPLL 0x6
|
||||
#define MUX_PWI_SEL_SCLKEPLL 0x7
|
||||
#define MUX_PWI_SEL_SCLKVPLL 0x8
|
||||
#define MUX_DPHY_SEL_SCLKMPLL 0x0
|
||||
#define MUX_DPHY_SEL_SCLKAPLL 0x1
|
||||
#define MUX_DMC_BUS_SEL_SCLKMPLL 0x0
|
||||
#define MUX_DMC_BUS_SEL_SCLKAPLL 0x1
|
||||
#define CLK_SRC_DMC_VAL ((MUX_PWI_SEL_XUSBXTI << 16) \
|
||||
| (MUX_DPHY_SEL_SCLKMPLL << 8) \
|
||||
| (MUX_DMC_BUS_SEL_SCLKMPLL << 4))
|
||||
|
||||
/* CLK_DIV_DMC0 */
|
||||
#define CORE_TIMERS_RATIO 0x1
|
||||
#define COPY2_RATIO 0x3
|
||||
#define DMCP_RATIO 0x1
|
||||
#define DMCD_RATIO 0x1
|
||||
#define DMC_RATIO 0x1
|
||||
#define DPHY_RATIO 0x1
|
||||
#define ACP_PCLK_RATIO 0x1
|
||||
#define ACP_RATIO 0x3
|
||||
#define CLK_DIV_DMC0_VAL ((CORE_TIMERS_RATIO << 28) \
|
||||
| (COPY2_RATIO << 24) \
|
||||
| (DMCP_RATIO << 20) \
|
||||
| (DMCD_RATIO << 16) \
|
||||
| (DMC_RATIO << 12) \
|
||||
| (DPHY_RATIO << 8) \
|
||||
| (ACP_PCLK_RATIO << 4) \
|
||||
| (ACP_RATIO << 0))
|
||||
|
||||
/* CLK_DIV_DMC1 */
|
||||
#define DPM_RATIO 0x1
|
||||
#define DVSEM_RATIO 0x1
|
||||
#define PWI_RATIO 0x1
|
||||
#define CLK_DIV_DMC1_VAL ((DPM_RATIO << 24) \
|
||||
| (DVSEM_RATIO << 16) \
|
||||
| (PWI_RATIO << 8))
|
||||
|
||||
/* CLK_SRC_TOP0 */
|
||||
#define MUX_ONENAND_SEL_ACLK_133 0x0
|
||||
#define MUX_ONENAND_SEL_ACLK_160 0x1
|
||||
#define MUX_ACLK_133_SEL_SCLKMPLL 0x0
|
||||
#define MUX_ACLK_133_SEL_SCLKAPLL 0x1
|
||||
#define MUX_ACLK_160_SEL_SCLKMPLL 0x0
|
||||
#define MUX_ACLK_160_SEL_SCLKAPLL 0x1
|
||||
#define MUX_ACLK_100_SEL_SCLKMPLL 0x0
|
||||
#define MUX_ACLK_100_SEL_SCLKAPLL 0x1
|
||||
#define MUX_ACLK_200_SEL_SCLKMPLL 0x0
|
||||
#define MUX_ACLK_200_SEL_SCLKAPLL 0x1
|
||||
#define MUX_VPLL_SEL_FINPLL 0x0
|
||||
#define MUX_VPLL_SEL_FOUTVPLL 0x1
|
||||
#define MUX_EPLL_SEL_FINPLL 0x0
|
||||
#define MUX_EPLL_SEL_FOUTEPLL 0x1
|
||||
#define MUX_ONENAND_1_SEL_MOUTONENAND 0x0
|
||||
#define MUX_ONENAND_1_SEL_SCLKVPLL 0x1
|
||||
#define CLK_SRC_TOP0_VAL ((MUX_ONENAND_SEL_ACLK_133 << 28) \
|
||||
| (MUX_ACLK_133_SEL_SCLKMPLL << 24) \
|
||||
| (MUX_ACLK_160_SEL_SCLKMPLL << 20) \
|
||||
| (MUX_ACLK_100_SEL_SCLKMPLL << 16) \
|
||||
| (MUX_ACLK_200_SEL_SCLKMPLL << 12) \
|
||||
| (MUX_VPLL_SEL_FINPLL << 8) \
|
||||
| (MUX_EPLL_SEL_FINPLL << 4)\
|
||||
| (MUX_ONENAND_1_SEL_MOUTONENAND << 0))
|
||||
|
||||
/* CLK_SRC_TOP1 */
|
||||
#define VPLLSRC_SEL_FINPLL 0x0
|
||||
#define VPLLSRC_SEL_SCLKHDMI24M 0x1
|
||||
#define CLK_SRC_TOP1_VAL (VPLLSRC_SEL_FINPLL)
|
||||
|
||||
/* CLK_DIV_TOP */
|
||||
#define ONENAND_RATIO 0x0
|
||||
#define ACLK_133_RATIO 0x5
|
||||
#define ACLK_160_RATIO 0x4
|
||||
#define ACLK_100_RATIO 0x7
|
||||
#define ACLK_200_RATIO 0x3
|
||||
#define CLK_DIV_TOP_VAL ((ONENAND_RATIO << 16) \
|
||||
| (ACLK_133_RATIO << 12)\
|
||||
| (ACLK_160_RATIO << 8) \
|
||||
| (ACLK_100_RATIO << 4) \
|
||||
| (ACLK_200_RATIO << 0))
|
||||
|
||||
/* CLK_SRC_LEFTBUS */
|
||||
#define MUX_GDL_SEL_SCLKMPLL 0x0
|
||||
#define MUX_GDL_SEL_SCLKAPLL 0x1
|
||||
#define CLK_SRC_LEFTBUS_VAL (MUX_GDL_SEL_SCLKMPLL)
|
||||
|
||||
/* CLK_DIV_LEFTBUS */
|
||||
#define GPL_RATIO 0x1
|
||||
#define GDL_RATIO 0x3
|
||||
#define CLK_DIV_LEFTBUS_VAL ((GPL_RATIO << 4) | (GDL_RATIO))
|
||||
|
||||
/* CLK_SRC_RIGHTBUS */
|
||||
#define MUX_GDR_SEL_SCLKMPLL 0x0
|
||||
#define MUX_GDR_SEL_SCLKAPLL 0x1
|
||||
#define CLK_SRC_RIGHTBUS_VAL (MUX_GDR_SEL_SCLKMPLL)
|
||||
|
||||
/* CLK_DIV_RIGHTBUS */
|
||||
#define GPR_RATIO 0x1
|
||||
#define GDR_RATIO 0x3
|
||||
#define CLK_DIV_RIGHTBUS_VAL ((GPR_RATIO << 4) | (GDR_RATIO))
|
||||
|
||||
/* CLK_SRS_FSYS: 6 = SCLKMPLL */
|
||||
#define SATA_SEL_SCLKMPLL 0
|
||||
#define SATA_SEL_SCLKAPLL 1
|
||||
|
||||
#define MMC_SEL_XXTI 0
|
||||
#define MMC_SEL_XUSBXTI 1
|
||||
#define MMC_SEL_SCLK_HDMI24M 2
|
||||
#define MMC_SEL_SCLK_USBPHY0 3
|
||||
#define MMC_SEL_SCLK_USBPHY1 4
|
||||
#define MMC_SEL_SCLK_HDMIPHY 5
|
||||
#define MMC_SEL_SCLKMPLL 6
|
||||
#define MMC_SEL_SCLKEPLL 7
|
||||
#define MMC_SEL_SCLKVPLL 8
|
||||
|
||||
#define MMCC0_SEL MMC_SEL_SCLKMPLL
|
||||
#define MMCC1_SEL MMC_SEL_SCLKMPLL
|
||||
#define MMCC2_SEL MMC_SEL_SCLKMPLL
|
||||
#define MMCC3_SEL MMC_SEL_SCLKMPLL
|
||||
#define MMCC4_SEL MMC_SEL_SCLKMPLL
|
||||
#define CLK_SRC_FSYS_VAL ((SATA_SEL_SCLKMPLL << 24) \
|
||||
| (MMCC4_SEL << 16) \
|
||||
| (MMCC3_SEL << 12) \
|
||||
| (MMCC2_SEL << 8) \
|
||||
| (MMCC1_SEL << 4) \
|
||||
| (MMCC0_SEL << 0))
|
||||
|
||||
/* SCLK_MMC[0-4] = MOUTMMC[0-4]/(MMC[0-4]_RATIO + 1)/(MMC[0-4]_PRE_RATIO +1) */
|
||||
/* CLK_DIV_FSYS1 */
|
||||
#define MMC0_RATIO 0xF
|
||||
#define MMC0_PRE_RATIO 0x0
|
||||
#define MMC1_RATIO 0xF
|
||||
#define MMC1_PRE_RATIO 0x0
|
||||
#define CLK_DIV_FSYS1_VAL ((MMC1_PRE_RATIO << 24) \
|
||||
| (MMC1_RATIO << 16) \
|
||||
| (MMC0_PRE_RATIO << 8) \
|
||||
| (MMC0_RATIO << 0))
|
||||
|
||||
/* CLK_DIV_FSYS2 */
|
||||
#define MMC2_RATIO 0xF
|
||||
#define MMC2_PRE_RATIO 0x0
|
||||
#define MMC3_RATIO 0xF
|
||||
#define MMC3_PRE_RATIO 0x0
|
||||
#define CLK_DIV_FSYS2_VAL ((MMC3_PRE_RATIO << 24) \
|
||||
| (MMC3_RATIO << 16) \
|
||||
| (MMC2_PRE_RATIO << 8) \
|
||||
| (MMC2_RATIO << 0))
|
||||
|
||||
/* CLK_DIV_FSYS3 */
|
||||
#define MMC4_RATIO 0xF
|
||||
#define MMC4_PRE_RATIO 0x0
|
||||
#define CLK_DIV_FSYS3_VAL ((MMC4_PRE_RATIO << 8) \
|
||||
| (MMC4_RATIO << 0))
|
||||
|
||||
/* CLK_SRC_PERIL0 */
|
||||
#define UART_SEL_XXTI 0
|
||||
#define UART_SEL_XUSBXTI 1
|
||||
#define UART_SEL_SCLK_HDMI24M 2
|
||||
#define UART_SEL_SCLK_USBPHY0 3
|
||||
#define UART_SEL_SCLK_USBPHY1 4
|
||||
#define UART_SEL_SCLK_HDMIPHY 5
|
||||
#define UART_SEL_SCLKMPLL 6
|
||||
#define UART_SEL_SCLKEPLL 7
|
||||
#define UART_SEL_SCLKVPLL 8
|
||||
|
||||
#define UART0_SEL UART_SEL_SCLKMPLL
|
||||
#define UART1_SEL UART_SEL_SCLKMPLL
|
||||
#define UART2_SEL UART_SEL_SCLKMPLL
|
||||
#define UART3_SEL UART_SEL_SCLKMPLL
|
||||
#define UART4_SEL UART_SEL_SCLKMPLL
|
||||
#define CLK_SRC_PERIL0_VAL ((UART4_SEL << 16) \
|
||||
| (UART3_SEL << 12) \
|
||||
| (UART2_SEL << 8) \
|
||||
| (UART1_SEL << 4) \
|
||||
| (UART0_SEL << 0))
|
||||
|
||||
/* SCLK_UART[0-4] = MOUTUART[0-4]/(UART[0-4]_RATIO + 1) */
|
||||
/* CLK_DIV_PERIL0 */
|
||||
#define UART0_RATIO 7
|
||||
#define UART1_RATIO 7
|
||||
#define UART2_RATIO 7
|
||||
#define UART3_RATIO 7
|
||||
#define UART4_RATIO 7
|
||||
#define CLK_DIV_PERIL0_VAL ((UART4_RATIO << 16) \
|
||||
| (UART3_RATIO << 12) \
|
||||
| (UART2_RATIO << 8) \
|
||||
| (UART1_RATIO << 4) \
|
||||
| (UART0_RATIO << 0))
|
||||
|
||||
/* Required period to generate a stable clock output */
|
||||
/* PLL_LOCK_TIME */
|
||||
#define PLL_LOCKTIME 0x1C20
|
||||
|
||||
/* PLL Values */
|
||||
#define DISABLE 0
|
||||
#define ENABLE 1
|
||||
#define SET_PLL(mdiv, pdiv, sdiv) ((ENABLE << 31)\
|
||||
| (mdiv << 16) \
|
||||
| (pdiv << 8) \
|
||||
| (sdiv << 0))
|
||||
|
||||
/* APLL_CON0 */
|
||||
#define APLL_MDIV 0xFA
|
||||
#define APLL_PDIV 0x6
|
||||
#define APLL_SDIV 0x1
|
||||
#define APLL_CON0_VAL SET_PLL(APLL_MDIV, APLL_PDIV, APLL_SDIV)
|
||||
|
||||
/* APLL_CON1 */
|
||||
#define APLL_AFC_ENB 0x1
|
||||
#define APLL_AFC 0xC
|
||||
#define APLL_CON1_VAL ((APLL_AFC_ENB << 31) | (APLL_AFC << 0))
|
||||
|
||||
/* MPLL_CON0 */
|
||||
#define MPLL_MDIV 0xC8
|
||||
#define MPLL_PDIV 0x6
|
||||
#define MPLL_SDIV 0x1
|
||||
#define MPLL_CON0_VAL SET_PLL(MPLL_MDIV, MPLL_PDIV, MPLL_SDIV)
|
||||
|
||||
/* MPLL_CON1 */
|
||||
#define MPLL_AFC_ENB 0x0
|
||||
#define MPLL_AFC 0x1C
|
||||
#define MPLL_CON1_VAL ((MPLL_AFC_ENB << 31) | (MPLL_AFC << 0))
|
||||
|
||||
/* EPLL_CON0 */
|
||||
#define EPLL_MDIV 0x30
|
||||
#define EPLL_PDIV 0x3
|
||||
#define EPLL_SDIV 0x2
|
||||
#define EPLL_CON0_VAL SET_PLL(EPLL_MDIV, EPLL_PDIV, EPLL_SDIV)
|
||||
|
||||
/* EPLL_CON1 */
|
||||
#define EPLL_K 0x0
|
||||
#define EPLL_CON1_VAL (EPLL_K >> 0)
|
||||
|
||||
/* VPLL_CON0 */
|
||||
#define VPLL_MDIV 0x35
|
||||
#define VPLL_PDIV 0x3
|
||||
#define VPLL_SDIV 0x2
|
||||
#define VPLL_CON0_VAL SET_PLL(VPLL_MDIV, VPLL_PDIV, VPLL_SDIV)
|
||||
|
||||
/* VPLL_CON1 */
|
||||
#define VPLL_SSCG_EN DISABLE
|
||||
#define VPLL_SEL_PF_DN_SPREAD 0x0
|
||||
#define VPLL_MRR 0x11
|
||||
#define VPLL_MFR 0x0
|
||||
#define VPLL_K 0x400
|
||||
#define VPLL_CON1_VAL ((VPLL_SSCG_EN << 31)\
|
||||
| (VPLL_SEL_PF_DN_SPREAD << 29) \
|
||||
| (VPLL_MRR << 24) \
|
||||
| (VPLL_MFR << 16) \
|
||||
| (VPLL_K << 0))
|
||||
/*
|
||||
* UART GPIO_A0/GPIO_A1 Control Register Value
|
||||
* 0x2: UART Function
|
||||
*/
|
||||
#define S5PC210_GPIO_A0_CON_VAL 0x22222222
|
||||
#define S5PC210_GPIO_A1_CON_VAL 0x222222
|
||||
|
||||
/* ULCON: UART Line Control Value 8N1 */
|
||||
#define WORD_LEN_5_BIT 0x00
|
||||
#define WORD_LEN_6_BIT 0x01
|
||||
#define WORD_LEN_7_BIT 0x02
|
||||
#define WORD_LEN_8_BIT 0x03
|
||||
|
||||
#define STOP_BIT_1 0x00
|
||||
#define STOP_BIT_2 0x01
|
||||
|
||||
#define NO_PARITY 0x00
|
||||
#define ODD_PARITY 0x4
|
||||
#define EVEN_PARITY 0x5
|
||||
#define FORCED_PARITY_CHECK_AS_1 0x6
|
||||
#define FORCED_PARITY_CHECK_AS_0 0x7
|
||||
|
||||
#define INFRAMODE_NORMAL 0x00
|
||||
#define INFRAMODE_INFRARED 0x01
|
||||
|
||||
#define ULCON_VAL ((INFRAMODE_NORMAL << 6) \
|
||||
| (NO_PARITY << 3) \
|
||||
| (STOP_BIT_1 << 2) \
|
||||
| (WORD_LEN_8_BIT << 0))
|
||||
|
||||
/*
|
||||
* UCON: UART Control Value
|
||||
* Tx_interrupt Type: Level
|
||||
* Rx_interrupt Type: Level
|
||||
* Rx Timeout Enabled: Yes
|
||||
* Rx-Error Atatus_Int Enable: Yes
|
||||
* Loop_Back: No
|
||||
* Break Signal: No
|
||||
* Transmit mode : Interrupt request/polling
|
||||
* Receive mode : Interrupt request/polling
|
||||
*/
|
||||
#define TX_PULSE_INTERRUPT 0
|
||||
#define TX_LEVEL_INTERRUPT 1
|
||||
#define RX_PULSE_INTERRUPT 0
|
||||
#define RX_LEVEL_INTERRUPT 1
|
||||
|
||||
#define RX_TIME_OUT ENABLE
|
||||
#define RX_ERROR_STATE_INT_ENB ENABLE
|
||||
#define LOOP_BACK DISABLE
|
||||
#define BREAK_SIGNAL DISABLE
|
||||
|
||||
#define TX_MODE_DISABLED 0X00
|
||||
#define TX_MODE_IRQ_OR_POLL 0X01
|
||||
#define TX_MODE_DMA 0X02
|
||||
|
||||
#define RX_MODE_DISABLED 0X00
|
||||
#define RX_MODE_IRQ_OR_POLL 0X01
|
||||
#define RX_MODE_DMA 0X02
|
||||
|
||||
#define UCON_VAL ((TX_LEVEL_INTERRUPT << 9) \
|
||||
| (RX_LEVEL_INTERRUPT << 8) \
|
||||
| (RX_TIME_OUT << 7) \
|
||||
| (RX_ERROR_STATE_INT_ENB << 6) \
|
||||
| (LOOP_BACK << 5) \
|
||||
| (BREAK_SIGNAL << 4) \
|
||||
| (TX_MODE_IRQ_OR_POLL << 2) \
|
||||
| (RX_MODE_IRQ_OR_POLL << 0))
|
||||
|
||||
/*
|
||||
* UFCON: UART FIFO Control Value
|
||||
* Tx FIFO Trigger LEVEL: 2 Bytes (001)
|
||||
* Rx FIFO Trigger LEVEL: 2 Bytes (001)
|
||||
* Tx Fifo Reset: No
|
||||
* Rx Fifo Reset: No
|
||||
* FIFO Enable: Yes
|
||||
*/
|
||||
#define TX_FIFO_TRIGGER_LEVEL_0_BYTES 0x00
|
||||
#define TX_FIFO_TRIGGER_LEVEL_2_BYTES 0x1
|
||||
#define TX_FIFO_TRIGGER_LEVEL_4_BYTES 0x2
|
||||
#define TX_FIFO_TRIGGER_LEVEL_6_BYTES 0x3
|
||||
#define TX_FIFO_TRIGGER_LEVEL_8_BYTES 0x4
|
||||
#define TX_FIFO_TRIGGER_LEVEL_10_BYTES 0x5
|
||||
#define TX_FIFO_TRIGGER_LEVEL_12_BYTES 0x6
|
||||
#define TX_FIFO_TRIGGER_LEVEL_14_BYTES 0x7
|
||||
|
||||
#define RX_FIFO_TRIGGER_LEVEL_2_BYTES 0x0
|
||||
#define RX_FIFO_TRIGGER_LEVEL_4_BYTES 0x1
|
||||
#define RX_FIFO_TRIGGER_LEVEL_6_BYTES 0x2
|
||||
#define RX_FIFO_TRIGGER_LEVEL_8_BYTES 0x3
|
||||
#define RX_FIFO_TRIGGER_LEVEL_10_BYTES 0x4
|
||||
#define RX_FIFO_TRIGGER_LEVEL_12_BYTES 0x5
|
||||
#define RX_FIFO_TRIGGER_LEVEL_14_BYTES 0x6
|
||||
#define RX_FIFO_TRIGGER_LEVEL_16_BYTES 0x7
|
||||
|
||||
#define TX_FIFO_TRIGGER_LEVEL TX_FIFO_TRIGGER_LEVEL_2_BYTES
|
||||
#define RX_FIFO_TRIGGER_LEVEL RX_FIFO_TRIGGER_LEVEL_4_BYTES
|
||||
#define TX_FIFO_RESET DISABLE
|
||||
#define RX_FIFO_RESET DISABLE
|
||||
#define FIFO_ENABLE ENABLE
|
||||
#define UFCON_VAL ((TX_FIFO_TRIGGER_LEVEL << 8) \
|
||||
| (RX_FIFO_TRIGGER_LEVEL << 4) \
|
||||
| (TX_FIFO_RESET << 2) \
|
||||
| (RX_FIFO_RESET << 1) \
|
||||
| (FIFO_ENABLE << 0))
|
||||
/*
|
||||
* Baud Rate Division Value
|
||||
* 115200 BAUD:
|
||||
* UBRDIV_VAL = SCLK_UART/((115200 * 16) - 1)
|
||||
* UBRDIV_VAL = (800 MHz)/((115200 * 16) - 1)
|
||||
*/
|
||||
#define UBRDIV_VAL 0x35
|
||||
|
||||
/*
|
||||
* Fractional Part of Baud Rate Divisor:
|
||||
* 115200 BAUD:
|
||||
* UBRFRACVAL = ((((SCLK_UART*10/(115200*16) -10))%10)*16/10)
|
||||
* UBRFRACVAL = ((((800MHz*10/(115200*16) -10))%10)*16/10)
|
||||
*/
|
||||
#define UFRACVAL_VAL 0x4
|
||||
|
||||
/*
|
||||
* TZPC Register Value :
|
||||
* R0SIZE: 0x0 : Size of secured ram
|
||||
*/
|
||||
#define R0SIZE 0x0
|
||||
|
||||
/*
|
||||
* TZPC Decode Protection Register Value :
|
||||
* DECPROTXSET: 0xFF : Set Decode region to non-secure
|
||||
*/
|
||||
#define DECPROTXSET 0xFF
|
||||
#endif
|
||||
@ -186,6 +186,7 @@ omap4_panda arm armv7 panda ti
|
||||
omap4_sdp4430 arm armv7 sdp4430 ti omap4
|
||||
s5p_goni arm armv7 goni samsung s5pc1xx
|
||||
smdkc100 arm armv7 smdkc100 samsung s5pc1xx
|
||||
origen arm armv7 origen samsung s5pc2xx
|
||||
s5pc210_universal arm armv7 universal_c210 samsung s5pc2xx
|
||||
smdkv310 arm armv7 smdkv310 samsung s5pc2xx
|
||||
harmony arm armv7 harmony nvidia tegra2
|
||||
|
||||
160
include/configs/origen.h
Normal file
160
include/configs/origen.h
Normal file
@ -0,0 +1,160 @@
|
||||
/*
|
||||
* Copyright (C) 2011 Samsung Electronics
|
||||
*
|
||||
* Configuration settings for the SAMSUNG ORIGEN (S5PV310) board.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/* High Level Configuration Options */
|
||||
#define CONFIG_SAMSUNG 1 /* SAMSUNG core */
|
||||
#define CONFIG_S5P 1 /* S5P Family */
|
||||
#define CONFIG_S5PC210 1 /* which is in a S5PC210 SoC */
|
||||
#define CONFIG_ORIGEN 1 /* working with ORIGEN*/
|
||||
|
||||
#include <asm/arch/cpu.h> /* get chip and board defs */
|
||||
|
||||
#define CONFIG_ARCH_CPU_INIT
|
||||
#define CONFIG_DISPLAY_CPUINFO
|
||||
#define CONFIG_DISPLAY_BOARDINFO
|
||||
|
||||
/* Keep L2 Cache Disabled */
|
||||
#define CONFIG_L2_OFF 1
|
||||
#define CONFIG_SYS_DCACHE_OFF 1
|
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE 0x40000000
|
||||
#define CONFIG_SYS_TEXT_BASE 0x43E00000
|
||||
|
||||
/* input clock of PLL: ORIGEN has 24MHz input clock */
|
||||
#define CONFIG_SYS_CLK_FREQ 24000000
|
||||
|
||||
#define CONFIG_SETUP_MEMORY_TAGS
|
||||
#define CONFIG_CMDLINE_TAG
|
||||
#define CONFIG_INITRD_TAG
|
||||
#define CONFIG_CMDLINE_EDITING
|
||||
|
||||
/* MACH_TYPE_ORIGEN macro will be removed once added to mach-types */
|
||||
#define MACH_TYPE_ORIGEN 3455
|
||||
#define CONFIG_MACH_TYPE MACH_TYPE_ORIGEN
|
||||
|
||||
/* Power Down Modes */
|
||||
#define S5P_CHECK_SLEEP 0x00000BAD
|
||||
#define S5P_CHECK_DIDLE 0xBAD00000
|
||||
#define S5P_CHECK_LPA 0xABAD0000
|
||||
|
||||
/* Size of malloc() pool */
|
||||
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
|
||||
|
||||
/* select serial console configuration */
|
||||
#define CONFIG_SERIAL_MULTI 1
|
||||
#define CONFIG_SERIAL2 1 /* use SERIAL 2 */
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#define S5PC210_DEFAULT_UART_OFFSET 0x020000
|
||||
|
||||
/* SD/MMC configuration */
|
||||
#define CONFIG_GENERIC_MMC 1
|
||||
#define CONFIG_MMC 1
|
||||
#define CONFIG_S5P_MMC 1
|
||||
|
||||
/* PWM */
|
||||
#define CONFIG_PWM 1
|
||||
|
||||
/* allow to overwrite serial and ethaddr */
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
|
||||
/* Command definition*/
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_ELF
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_MMC
|
||||
#define CONFIG_CMD_FAT
|
||||
#undef CONFIG_CMD_NET
|
||||
#undef CONFIG_CMD_NFS
|
||||
|
||||
#define CONFIG_BOOTDELAY 3
|
||||
#define CONFIG_ZERO_BOOTDELAY_CHECK
|
||||
|
||||
#define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000"
|
||||
|
||||
/* Miscellaneous configurable options */
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
|
||||
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
||||
#define CONFIG_SYS_PROMPT "ORIGEN # "
|
||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size*/
|
||||
#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
|
||||
/* Boot Argument Buffer Size */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
||||
/* memtest works on */
|
||||
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
||||
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x6000000)
|
||||
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
|
||||
|
||||
#define CONFIG_SYS_HZ 1000
|
||||
|
||||
/* valid baudrates */
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
||||
|
||||
/* Stack sizes */
|
||||
#define CONFIG_STACKSIZE (256 << 10) /* 256KB */
|
||||
|
||||
/* ORIGEN has 4 bank of DRAM */
|
||||
#define CONFIG_NR_DRAM_BANKS 4
|
||||
#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
|
||||
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
|
||||
#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE
|
||||
#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
|
||||
#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE
|
||||
#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE))
|
||||
#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE
|
||||
#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE))
|
||||
#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE
|
||||
|
||||
/* FLASH and environment organization */
|
||||
#define CONFIG_SYS_NO_FLASH 1
|
||||
#undef CONFIG_CMD_IMLS
|
||||
#define CONFIG_IDENT_STRING " for ORIGEN"
|
||||
|
||||
#ifdef CONFIG_USE_IRQ
|
||||
#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
|
||||
#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
|
||||
#endif
|
||||
|
||||
#define CONFIG_CLK_1000_400_200
|
||||
|
||||
/* MIU (Memory Interleaving Unit) */
|
||||
#define CONFIG_MIU_2BIT_21_7_INTERLEAVED
|
||||
|
||||
#define CONFIG_ENV_IS_IN_MMC 1
|
||||
#define CONFIG_SYS_MMC_ENV_DEV 0
|
||||
#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */
|
||||
#define RESERVE_BLOCK_SIZE (512)
|
||||
#define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/
|
||||
#define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE)
|
||||
#define CONFIG_DOS_PARTITION 1
|
||||
|
||||
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE)
|
||||
#endif /* __CONFIG_H */
|
||||
Loading…
Reference in New Issue
Block a user