arm: Remove versatileab board

This board has not been converted to generic board by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Simon Glass 2015-08-30 19:19:30 -06:00 committed by Tom Rini
parent 0c81f37d9a
commit b928e658f4
11 changed files with 1 additions and 424 deletions

View File

@ -70,7 +70,7 @@ config SYS_L2CACHE_OFF
choice
prompt "Target select"
default ARCH_VERSATILE
default TARGET_HIKEY
config ARCH_AT91
bool "Atmel AT91"
@ -227,10 +227,6 @@ config TARGET_X600
select CPU_ARM926EJS
select SUPPORT_SPL
config ARCH_VERSATILE
bool "ARM Ltd. Versatile family"
select CPU_ARM926EJS
config TARGET_IMX31_PHYCORE
bool "Support imx31_phycore"
select CPU_ARM1136
@ -709,8 +705,6 @@ source "arch/arm/mach-tegra/Kconfig"
source "arch/arm/mach-uniphier/Kconfig"
source "arch/arm/mach-versatile/Kconfig"
source "arch/arm/mach-zynq/Kconfig"
source "arch/arm/cpu/armv7/Kconfig"

View File

@ -58,7 +58,6 @@ machine-$(CONFIG_ARCH_SOCFPGA) += socfpga
machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
machine-$(CONFIG_TEGRA) += tegra
machine-$(CONFIG_ARCH_UNIPHIER) += uniphier
machine-$(CONFIG_ARCH_VERSATILE) += versatile
machine-$(CONFIG_ARCH_ZYNQ) += zynq
machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))

View File

@ -1,15 +0,0 @@
if ARCH_VERSATILE
config SYS_BOARD
default "versatile"
config SYS_VENDOR
default "armltd"
config SYS_SOC
default "versatile"
config SYS_CONFIG_NAME
default "versatile"
endif

View File

@ -1,8 +0,0 @@
VERSATILE BOARD
#M: -
S: Maintained
F: board/armltd/versatile/
F: include/configs/versatile.h
F: configs/versatileab_defconfig
F: configs/versatilepb_defconfig
F: configs/versatileqemu_defconfig

View File

@ -1,9 +0,0 @@
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y := versatile.o
obj-y += lowlevel_init.o

View File

@ -1,17 +0,0 @@
/*
* Board specific setup info
*
* (C) Copyright 2003, ARM Ltd.
* Philippe Robin, <philippe.robin@arm.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
/* Set up the platform, once the cpu has been initialized */
.globl lowlevel_init
lowlevel_init:
/* All done by Versatile's boot monitor! */
mov pc, lr

View File

@ -1,99 +0,0 @@
/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2002
* David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
*
* (C) Copyright 2003
* Texas Instruments, <www.ti.com>
* Kshitij Gupta <Kshitij@ti.com>
*
* (C) Copyright 2004
* ARM Ltd.
* Philippe Robin, <philippe.robin@arm.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <netdev.h>
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_SHOW_BOOT_PROGRESS)
void show_boot_progress(int progress)
{
printf("Boot reached stage %d\n", progress);
}
#endif
#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF)
/*
* Miscellaneous platform dependent initialisations
*/
int board_early_init_f (void)
{
/*
* set clock frequency:
* VERSATILE_REFCLK is 32KHz
* VERSATILE_TIMCLK is 1MHz
*/
*(volatile unsigned int *)(VERSATILE_SCTL_BASE) |=
((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
(VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel));
return 0;
}
int board_init (void)
{
/* arch number of Versatile Board */
#ifdef CONFIG_ARCH_VERSATILE_AB
gd->bd->bi_arch_number = MACH_TYPE_VERSATILE_AB;
#else
gd->bd->bi_arch_number = MACH_TYPE_VERSATILE_PB;
#endif
/* adress of boot parameters */
gd->bd->bi_boot_params = 0x00000100;
gd->flags = 0;
icache_enable ();
return 0;
}
int misc_init_r (void)
{
setenv("verify", "n");
return (0);
}
/******************************
Routine:
Description:
******************************/
int dram_init (void)
{
/* dram_init must store complete ramsize in gd->ram_size */
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
PHYS_SDRAM_1_SIZE);
return 0;
}
#ifdef CONFIG_CMD_NET
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_SMC91111
rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
#endif
return rc;
}
#endif

View File

@ -1,18 +0,0 @@
CONFIG_ARM=y
CONFIG_SYS_EXTRA_OPTIONS="ARCH_VERSATILE_AB"
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_RUN is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_ENV_EXISTS is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FPGA is not set
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
# CONFIG_CMD_MISC is not set

View File

@ -1,18 +0,0 @@
CONFIG_ARM=y
CONFIG_SYS_EXTRA_OPTIONS="ARCH_VERSATILE_PB"
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_RUN is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_ENV_EXISTS is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FPGA is not set
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
# CONFIG_CMD_MISC is not set

View File

@ -1,18 +0,0 @@
CONFIG_ARM=y
CONFIG_SYS_EXTRA_OPTIONS="ARCH_VERSATILE_QEMU,ARCH_VERSATILE_PB"
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_RUN is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_ENV_EXISTS is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_FPGA is not set
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
# CONFIG_CMD_MISC is not set

View File

@ -1,214 +0,0 @@
/*
* (C) Copyright 2003
* Texas Instruments.
* Kshitij Gupta <kshitij@ti.com>
* Configuation settings for the TI OMAP Innovator board.
*
* (C) Copyright 2004
* ARM Ltd.
* Philippe Robin, <philippe.robin@arm.com>
* Configuration for Versatile PB.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_VERSATILE 1 /* This is Versatile Platform Board */
#define CONFIG_ARCH_VERSATILE 1 /* Specifically, a Versatile */
#define CONFIG_SYS_MEMTEST_START 0x100000
#define CONFIG_SYS_MEMTEST_END 0x10000000
#define CONFIG_SYS_TIMERBASE 0x101E2000 /* Timer 0 and 1 base */
#define CONFIG_SYS_TIMER_RATE (1000000 / 256)
#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4)
#define CONFIG_SYS_TIMER_COUNTS_DOWN
/*
* control registers
*/
#define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */
/*
* System controller bit assignment
*/
#define VERSATILE_REFCLK 0
#define VERSATILE_TIMCLK 1
#define VERSATILE_TIMER1_EnSel 15
#define VERSATILE_TIMER2_EnSel 17
#define VERSATILE_TIMER3_EnSel 19
#define VERSATILE_TIMER4_EnSel 21
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_MISC_INIT_R 1
/*
* Size of malloc() pool
*/
#define CONFIG_ENV_SIZE 8192
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
/*
* Hardware drivers
*/
#define CONFIG_SMC91111
#define CONFIG_SMC_USE_32_BIT
#define CONFIG_SMC91111_BASE 0x10010000
#undef CONFIG_SMC91111_EXT_PHY
/*
* NS16550 Configuration
*/
#define CONFIG_PL011_SERIAL
#define CONFIG_PL011_CLOCK 24000000
#define CONFIG_PL01x_PORTS \
{(void *)CONFIG_SYS_SERIAL0, \
(void *)CONFIG_SYS_SERIAL1 }
#define CONFIG_CONS_INDEX 0
#define CONFIG_BAUDRATE 38400
#define CONFIG_SYS_SERIAL0 0x101F1000
#define CONFIG_SYS_SERIAL1 0x101F2000
/*
* Command line configuration.
*/
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_PING
/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTDELAY 2
#define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp "\
"netdev=25,0,0xf1010000,0xf1010010,eth0 "\
"console=ttyAMA0,38400n1"
/*
* Static configuration when assigning fixed address
*/
#define CONFIG_BOOTFILE "/tftpboot/uImage" /* file to load */
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
/* Monitor Command Prompt */
#undef CONFIG_SYS_PROMPT
#ifdef CONFIG_ARCH_VERSATILE_AB
# define CONFIG_SYS_PROMPT "VersatileAB # "
#else
# define CONFIG_SYS_PROMPT "VersatilePB # "
#endif
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE \
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR 0x00800000
#define CONFIG_SYS_INIT_RAM_SIZE 0x000FFFFF
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_GBL_DATA_OFFSET)
#define CONFIG_BOARD_EARLY_INIT_F
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
#ifdef CONFIG_ARCH_VERSATILE_QEMU
#define CONFIG_SYS_TEXT_BASE 0x10000
#define CONFIG_SYS_NO_FLASH
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_SYS_MONITOR_LEN 0x80000
#else
#define CONFIG_SYS_TEXT_BASE 0x01000000
/*
* Use the CFI flash driver for ease of use
*/
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_ENV_IS_IN_FLASH 1
/*
* System control register
*/
#define VERSATILE_SYS_BASE 0x10000000
#define VERSATILE_SYS_FLASH_OFFSET 0x4C
#define VERSATILE_FLASHCTRL \
(VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET)
/* Enable writing to flash */
#define VERSATILE_FLASHPROG_FLVPPEN (1 << 0)
/* timeout values are in ticks */
#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Erase Timeout */
#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Write Timeout */
/*
* Note that CONFIG_SYS_MAX_FLASH_SECT allows for a parameter block
* i.e.
* the bottom "sector" (bottom boot), or top "sector"
* (top boot), is a seperate erase region divided into
* 4 (equal) smaller sectors. This, notionally, allows
* quicker erase/rewrire of the most frequently changed
* area......
* CONFIG_SYS_MAX_FLASH_SECT is padded up to a multiple of 4
*/
#ifdef CONFIG_ARCH_VERSATILE_AB
#define FLASH_SECTOR_SIZE 0x00020000 /* 128 KB sectors */
#define CONFIG_ENV_SECT_SIZE (2 * FLASH_SECTOR_SIZE)
#define CONFIG_SYS_MAX_FLASH_SECT (520)
#endif
#ifdef CONFIG_ARCH_VERSATILE_PB /* Versatile PB is default */
#define FLASH_SECTOR_SIZE 0x00040000 /* 256 KB sectors */
#define CONFIG_ENV_SECT_SIZE FLASH_SECTOR_SIZE
#define CONFIG_SYS_MAX_FLASH_SECT (260)
#endif
#define CONFIG_SYS_FLASH_BASE 0x34000000
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_MONITOR_LEN (4 * CONFIG_ENV_SECT_SIZE)
/* The ARM Boot Monitor is shipped in the lowest sector of flash */
#define FLASH_TOP (CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE)
#define CONFIG_ENV_ADDR (FLASH_TOP - CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_MONITOR_BASE (CONFIG_ENV_ADDR - CONFIG_SYS_MONITOR_LEN)
#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */
#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
#endif
#endif /* __CONFIG_H */