- BSP command added.

board/esd/ocrtc/Makefile

@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	= $(BOARD).o flash.o
+OBJS	= $(BOARD).o flash.o cmd_ocrtc.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS)

board/esd/ocrtc/cmd_ocrtc.c

@@ -0,0 +1,87 @@
+/*
+ * (C) Copyright 2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <405gp_pci.h>
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+
+#define IBM_VENDOR_ID    0x1014
+#define PPC405_DEVICE_ID 0x0156
+
+
+/*
+ * Set device number on pci board
+ */
+int do_setdevice(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int idx = 1;	  /* start at 1 (skip device 0) */
+	pci_dev_t bdf = 0;
+	u32 addr;
+
+	while (bdf >= 0) {
+		if ((bdf = pci_find_device(IBM_VENDOR_ID, PPC405_DEVICE_ID, idx++)) < 0) {
+			break;
+		}
+		printf("Found device nr %d at %x!\n", idx-1, bdf);
+		pci_read_config_dword(bdf, PCI_BASE_ADDRESS_1, &addr);
+		addr &= ~0xf;
+		*(u32 *)addr = (bdf & 0x0000f800) >> 11;
+		printf("Wrote %x at %x!\n", (bdf & 0x0000f800) >> 11, addr);
+	}
+
+	return 0;
+}
+U_BOOT_CMD(
+	setdevice,	1,	1,	do_setdevice,
+	"setdevice - Set device number on pci adapter boards\n",
+	NULL
+);
+
+
+/*
+ * Get device number on pci board
+ */
+int do_getdevice(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	u32 device;
+	char str[32];
+
+	device = *(u32 *)0x0;
+	device = 0x16 - device;      /* calculate vxworks bp slot id */
+	sprintf(str, "%d", device);
+	setenv("slot", str);
+	printf("Variabel slot set to %x\n", device);
+
+	return 0;
+}
+U_BOOT_CMD(
+	getdevice,	1,	1,	do_getdevice,
+	"getdevice - Get device number and set slot env variable\n",
+	NULL
+);
+
+#endif

include/configs/OCRTC.h

@@ -58,6 +58,7 @@
 				CFG_CMD_IRQ	| \
 				CFG_CMD_ASKENV	| \
 				CFG_CMD_ELF	| \
+				CFG_CMD_BSP	| \
 				CFG_CMD_EEPROM  )
 
 #define CONFIG_MAC_PARTITION

include/configs/ORSG.h

@@ -58,6 +58,7 @@
 				CFG_CMD_IRQ	| \
 				CFG_CMD_ASKENV	| \
 				CFG_CMD_ELF	| \
+				CFG_CMD_BSP	| \
 				CFG_CMD_EEPROM  )
 
 #define CONFIG_MAC_PARTITION