arm64: mvebu: use single defconfig for Armada8K development boards
Currently, Marvell Armada8k development board use 3 different
defconfigs:
mvebu_db-88f7040-nand_defconfig
mvebu_db-88f7040_defconfig
mvebu_db-88f8040_defconfig
Having 3 different defconfigs makes maintenance difficult.
This patch removes the defconfigs mentioned above and introduce
a new defconfig which represents the Armada8k family.
NOTE:
In order not to break automatic tools compilation,
a default device-tree is set in the defconfig (armada-8040-db).
However, when compiling u-boot, the user MUST explicitly export
the DEVICE_TREE for the requested board because using A80x0
device-tree on A70x0 might break the device.
For more information, refer to "doc/README.marvell" (intoduced
in this patch).
Change-Id: I98515b6306498358f3722ecf7ac4c87f236ebbd8
Signed-off-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Igal Liberman
Stefan Roese
parent
b6ee860b87
commit
b6518b1ea3
@ -1,72 +0,0 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MVEBU=y
|
||||
CONFIG_SYS_MALLOC_F_LEN=0x2000
|
||||
CONFIG_TARGET_MVEBU_ARMADA_8K=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="armada-7040-db-nand"
|
||||
CONFIG_SMBIOS_PRODUCT_NAME=""
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_AHCI=y
|
||||
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
||||
CONFIG_SYS_CONSOLE_INFO_QUIET=y
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
# CONFIG_DISPLAY_BOARDINFO is not set
|
||||
CONFIG_ARCH_EARLY_INIT_R=y
|
||||
CONFIG_BOARD_EARLY_INIT_F=y
|
||||
CONFIG_HUSH_PARSER=y
|
||||
# CONFIG_CMD_IMLS is not set
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_NAND=y
|
||||
CONFIG_CMD_PART=y
|
||||
CONFIG_CMD_SF=y
|
||||
CONFIG_CMD_SPI=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_USB=y
|
||||
# CONFIG_CMD_FPGA is not set
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_CMD_TFTPPUT=y
|
||||
CONFIG_CMD_DHCP=y
|
||||
CONFIG_CMD_MII=y
|
||||
CONFIG_CMD_PING=y
|
||||
CONFIG_CMD_CACHE=y
|
||||
CONFIG_CMD_TIME=y
|
||||
CONFIG_CMD_MVEBU_BUBT=y
|
||||
CONFIG_MVEBU_NAND_BOOT=y
|
||||
CONFIG_CMD_EXT4=y
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_CMD_FAT=y
|
||||
CONFIG_CMD_FS_GENERIC=y
|
||||
CONFIG_MAC_PARTITION=y
|
||||
CONFIG_ISO_PARTITION=y
|
||||
CONFIG_EFI_PARTITION=y
|
||||
CONFIG_BLOCK_CACHE=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_SYS_I2C_MVTWSI=y
|
||||
CONFIG_MISC=y
|
||||
CONFIG_DM_MMC=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_XENON=y
|
||||
CONFIG_NAND_PXA3XX=y
|
||||
CONFIG_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_MACRONIX=y
|
||||
CONFIG_SPI_FLASH_SPANSION=y
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_DM_PCI=y
|
||||
CONFIG_PCIE_DW_MVEBU=y
|
||||
CONFIG_MVEBU_COMPHY_SUPPORT=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCTRL_ARMADA_8K=y
|
||||
# CONFIG_SPL_SERIAL_PRESENT is not set
|
||||
CONFIG_DEBUG_UART_BASE=0xf0512000
|
||||
CONFIG_DEBUG_UART_CLOCK=200000000
|
||||
CONFIG_DEBUG_UART_SHIFT=2
|
||||
CONFIG_DEBUG_UART_ANNOUNCE=y
|
||||
CONFIG_SYS_NS16550=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_DM_USB=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_SMBIOS_MANUFACTURER=""
|
||||
@ -1,70 +0,0 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MVEBU=y
|
||||
CONFIG_SYS_MALLOC_F_LEN=0x2000
|
||||
CONFIG_TARGET_MVEBU_ARMADA_8K=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="armada-7040-db"
|
||||
CONFIG_SMBIOS_PRODUCT_NAME=""
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_AHCI=y
|
||||
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
||||
CONFIG_SYS_CONSOLE_INFO_QUIET=y
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
# CONFIG_DISPLAY_BOARDINFO is not set
|
||||
CONFIG_ARCH_EARLY_INIT_R=y
|
||||
CONFIG_BOARD_EARLY_INIT_F=y
|
||||
CONFIG_HUSH_PARSER=y
|
||||
# CONFIG_CMD_IMLS is not set
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_PART=y
|
||||
CONFIG_CMD_SF=y
|
||||
CONFIG_CMD_SPI=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_USB=y
|
||||
# CONFIG_CMD_FPGA is not set
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_CMD_TFTPPUT=y
|
||||
CONFIG_CMD_DHCP=y
|
||||
CONFIG_CMD_MII=y
|
||||
CONFIG_CMD_PING=y
|
||||
CONFIG_CMD_CACHE=y
|
||||
CONFIG_CMD_TIME=y
|
||||
CONFIG_CMD_MVEBU_BUBT=y
|
||||
CONFIG_CMD_EXT4=y
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_CMD_FAT=y
|
||||
CONFIG_CMD_FS_GENERIC=y
|
||||
CONFIG_MAC_PARTITION=y
|
||||
CONFIG_ISO_PARTITION=y
|
||||
CONFIG_EFI_PARTITION=y
|
||||
CONFIG_BLOCK_CACHE=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_SYS_I2C_MVTWSI=y
|
||||
CONFIG_MISC=y
|
||||
CONFIG_DM_MMC=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_XENON=y
|
||||
CONFIG_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_MACRONIX=y
|
||||
CONFIG_SPI_FLASH_SPANSION=y
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
||||
CONFIG_PHY_MARVELL=y
|
||||
CONFIG_MVPP2=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_DM_PCI=y
|
||||
CONFIG_PCIE_DW_MVEBU=y
|
||||
CONFIG_MVEBU_COMPHY_SUPPORT=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCTRL_ARMADA_8K=y
|
||||
# CONFIG_SPL_SERIAL_PRESENT is not set
|
||||
CONFIG_DEBUG_UART_BASE=0xf0512000
|
||||
CONFIG_DEBUG_UART_CLOCK=200000000
|
||||
CONFIG_DEBUG_UART_SHIFT=2
|
||||
CONFIG_DEBUG_UART_ANNOUNCE=y
|
||||
CONFIG_SYS_NS16550=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_DM_USB=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_SMBIOS_MANUFACTURER=""
|
||||
53
doc/README.marvell
Normal file
53
doc/README.marvell
Normal file
@ -0,0 +1,53 @@
|
||||
Marvell U-Boot Build Instructions
|
||||
=================================
|
||||
|
||||
This document describes how to compile the U-Boot and how to change U-Boot configuration
|
||||
|
||||
Build Procedure
|
||||
----------------
|
||||
1. Install required packages:
|
||||
|
||||
# sudo apt-get install libssl-dev
|
||||
# sudo apt-get install device-tree-compiler
|
||||
# sudo apt-get install swig libpython-dev
|
||||
|
||||
2. Set the cross compiler:
|
||||
|
||||
# export CROSS_COMPILE=/path/to/toolchain/aarch64-marvell-linux-gnu-
|
||||
|
||||
3. Clean-up old residuals:
|
||||
|
||||
# make mrproper
|
||||
|
||||
4. Configure the U-Boot:
|
||||
|
||||
# make <defconfig_file>
|
||||
|
||||
- For the Armada-70x0/80x0 DB board use "mvebu_db_armada8k_defconfig"
|
||||
- For the Armada-80x0 MacchiatoBin use "make mvebu_mcbin-88f8040_defconfig"
|
||||
- For the Armada-3700 DB board use "make mvebu_db-88f3720_defconfig"
|
||||
- For the Armada-3700 EsspressoBin use "make mvebu_espressobin-88f3720_defconfig"
|
||||
|
||||
5. Configure the device-tree and build the U-Boot image:
|
||||
|
||||
Compile u-boot and set the required device-tree using:
|
||||
|
||||
# make DEVICE_TREE=<name>
|
||||
|
||||
NOTE:
|
||||
Compilation with "mvebu_db_armada8k_defconfig" requires explicitly exporting DEVICE_TREE
|
||||
for the requested board.
|
||||
By default, u-boot is compiled with armada-8040-db device-tree.
|
||||
Using A80x0 device-tree on A70x0 might break the device.
|
||||
In order to prevent this, the required device-tree MUST be set during compilation.
|
||||
All device-tree files are located in ./arch/arm/dts/ folder.
|
||||
|
||||
NOTE:
|
||||
The u-boot.bin should not be used as a stand-alone image.
|
||||
The ARM Trusted Firmware (ATF) build process uses this image to generate the
|
||||
flash image.
|
||||
|
||||
Configuration update
|
||||
---------------------
|
||||
To update the U-Boot configuration, please refer to doc/README.kconfig
|
||||
|
||||
Loading…
Reference in New Issue
Block a user