Merge remote branch 'origin/master' into next
This commit is contained in:
commit
b46b353b90
19
README
19
README
@ -3005,7 +3005,9 @@ environment. As long as you don't save the environment you are
|
||||
working with an in-memory copy. In case the Flash area containing the
|
||||
environment is erased by accident, a default environment is provided.
|
||||
|
||||
Some configuration options can be set using Environment Variables:
|
||||
Some configuration options can be set using Environment Variables.
|
||||
|
||||
List of environment variables (most likely not complete):
|
||||
|
||||
baudrate - see CONFIG_BAUDRATE
|
||||
|
||||
@ -3117,7 +3119,7 @@ Some configuration options can be set using Environment Variables:
|
||||
available network interfaces.
|
||||
It just stays at the currently selected interface.
|
||||
|
||||
netretry - When set to "no" each network operation will
|
||||
netretry - When set to "no" each network operation will
|
||||
either succeed or fail without retrying.
|
||||
When set to "once" the network operation will
|
||||
fail when all the available network interfaces
|
||||
@ -3133,7 +3135,18 @@ Some configuration options can be set using Environment Variables:
|
||||
tftpdstport - If this is set, the value is used for TFTP's UDP
|
||||
destination port instead of the Well Know Port 69.
|
||||
|
||||
vlan - When set to a value < 4095 the traffic over
|
||||
tftpblocksize - Block size to use for TFTP transfers; if not set,
|
||||
we use the TFTP server's default block size
|
||||
|
||||
tftptimeout - Retransmission timeout for TFTP packets (in milli-
|
||||
seconds, minimum value is 1000 = 1 second). Defines
|
||||
when a packet is considered to be lost so it has to
|
||||
be retransmitted. The default is 5000 = 5 seconds.
|
||||
Lowering this value may make downloads succeed
|
||||
faster in networks with high packet loss rates or
|
||||
with unreliable TFTP servers.
|
||||
|
||||
vlan - When set to a value < 4095 the traffic over
|
||||
Ethernet is encapsulated/received over 802.1q
|
||||
VLAN tagged frames.
|
||||
|
||||
|
0
board/spear/common/spr_lowlevel_init.S
Executable file → Normal file
0
board/spear/common/spr_lowlevel_init.S
Executable file → Normal file
0
board/spear/common/spr_misc.c
Executable file → Normal file
0
board/spear/common/spr_misc.c
Executable file → Normal file
0
board/spear/spear300/Makefile
Executable file → Normal file
0
board/spear/spear300/Makefile
Executable file → Normal file
0
board/spear/spear300/config.mk
Executable file → Normal file
0
board/spear/spear300/config.mk
Executable file → Normal file
0
board/spear/spear300/spear300.c
Executable file → Normal file
0
board/spear/spear300/spear300.c
Executable file → Normal file
0
board/spear/spear310/Makefile
Executable file → Normal file
0
board/spear/spear310/Makefile
Executable file → Normal file
0
board/spear/spear310/config.mk
Executable file → Normal file
0
board/spear/spear310/config.mk
Executable file → Normal file
0
board/spear/spear310/spear310.c
Executable file → Normal file
0
board/spear/spear310/spear310.c
Executable file → Normal file
0
board/spear/spear320/Makefile
Executable file → Normal file
0
board/spear/spear320/Makefile
Executable file → Normal file
0
board/spear/spear320/config.mk
Executable file → Normal file
0
board/spear/spear320/config.mk
Executable file → Normal file
0
board/spear/spear320/spear320.c
Executable file → Normal file
0
board/spear/spear320/spear320.c
Executable file → Normal file
0
board/spear/spear600/Makefile
Executable file → Normal file
0
board/spear/spear600/Makefile
Executable file → Normal file
0
board/spear/spear600/config.mk
Executable file → Normal file
0
board/spear/spear600/config.mk
Executable file → Normal file
0
board/spear/spear600/spear600.c
Executable file → Normal file
0
board/spear/spear600/spear600.c
Executable file → Normal file
@ -136,7 +136,7 @@ int do_mmcinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
|
||||
}
|
||||
|
||||
U_BOOT_CMD(mmcinfo, 2, 0, do_mmcinfo,
|
||||
"mmcinfo <dev num>-- display MMC info\n",
|
||||
"mmcinfo <dev num>-- display MMC info",
|
||||
""
|
||||
);
|
||||
|
||||
|
@ -659,10 +659,14 @@ int console_init_r(void)
|
||||
#ifdef CONFIG_SPLASH_SCREEN
|
||||
/*
|
||||
* suppress all output if splash screen is enabled and we have
|
||||
* a bmp to display
|
||||
* a bmp to display. We redirect the output from frame buffer
|
||||
* console to serial console in this case or suppress it if
|
||||
* "silent" mode was requested.
|
||||
*/
|
||||
if (getenv("splashimage") != NULL)
|
||||
gd->flags |= GD_FLG_SILENT;
|
||||
if (getenv("splashimage") != NULL) {
|
||||
if (!(gd->flags & GD_FLG_SILENT))
|
||||
outputdev = search_device (DEV_FLAGS_OUTPUT, "serial");
|
||||
}
|
||||
#endif
|
||||
|
||||
/* Scan devices looking for input and output devices */
|
||||
|
0
cpu/arm926ejs/spear/Makefile
Executable file → Normal file
0
cpu/arm926ejs/spear/Makefile
Executable file → Normal file
0
cpu/arm926ejs/spear/reset.c
Executable file → Normal file
0
cpu/arm926ejs/spear/reset.c
Executable file → Normal file
0
cpu/arm926ejs/spear/timer.c
Executable file → Normal file
0
cpu/arm926ejs/spear/timer.c
Executable file → Normal file
0
cpu/arm926ejs/versatile/timer.c
Executable file → Normal file
0
cpu/arm926ejs/versatile/timer.c
Executable file → Normal file
@ -145,10 +145,10 @@ void *video_hw_init(void)
|
||||
struct fb_info *info;
|
||||
|
||||
if (mpc5121_diu_init() < 0)
|
||||
return;
|
||||
return NULL;
|
||||
|
||||
/* fill in Graphic device struct */
|
||||
sprintf(pGD->modeIdent, "%dx%dx%d %ldkHz %ldHz",
|
||||
sprintf(pGD->modeIdent, "%dx%dx%d %dkHz %dHz",
|
||||
xres, yres, 32, 64, 60);
|
||||
|
||||
pGD->frameAdrs = (unsigned int)fsl_fb_open(&info);
|
||||
|
0
drivers/i2c/Makefile
Executable file → Normal file
0
drivers/i2c/Makefile
Executable file → Normal file
0
drivers/i2c/spr_i2c.c
Executable file → Normal file
0
drivers/i2c/spr_i2c.c
Executable file → Normal file
@ -136,14 +136,14 @@ static void mxcmci_softreset(struct mxcmci_host *host)
|
||||
int i;
|
||||
|
||||
/* reset sequence */
|
||||
writew(STR_STP_CLK_RESET, &host->base->str_stp_clk);
|
||||
writew(STR_STP_CLK_RESET | STR_STP_CLK_START_CLK,
|
||||
writel(STR_STP_CLK_RESET, &host->base->str_stp_clk);
|
||||
writel(STR_STP_CLK_RESET | STR_STP_CLK_START_CLK,
|
||||
&host->base->str_stp_clk);
|
||||
|
||||
for (i = 0; i < 8; i++)
|
||||
writew(STR_STP_CLK_START_CLK, &host->base->str_stp_clk);
|
||||
writel(STR_STP_CLK_START_CLK, &host->base->str_stp_clk);
|
||||
|
||||
writew(0xff, &host->base->res_to);
|
||||
writel(0xff, &host->base->res_to);
|
||||
}
|
||||
|
||||
static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
|
||||
@ -154,8 +154,8 @@ static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
|
||||
|
||||
host->data = data;
|
||||
|
||||
writew(nob, &host->base->nob);
|
||||
writew(blksz, &host->base->blk_len);
|
||||
writel(nob, &host->base->nob);
|
||||
writel(blksz, &host->base->blk_len);
|
||||
host->datasize = datasize;
|
||||
}
|
||||
|
||||
@ -185,9 +185,9 @@ static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_cmd *cmd,
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
writew(cmd->cmdidx, &host->base->cmd);
|
||||
writel(cmd->cmdidx, &host->base->cmd);
|
||||
writel(cmd->cmdarg, &host->base->arg);
|
||||
writew(cmdat, &host->base->cmd_dat_cont);
|
||||
writel(cmdat, &host->base->cmd_dat_cont);
|
||||
|
||||
return 0;
|
||||
}
|
||||
@ -247,14 +247,14 @@ static int mxcmci_read_response(struct mxcmci_host *host, unsigned int stat)
|
||||
if (cmd->resp_type & MMC_RSP_PRESENT) {
|
||||
if (cmd->resp_type & MMC_RSP_136) {
|
||||
for (i = 0; i < 4; i++) {
|
||||
a = readw(&host->base->res_fifo);
|
||||
b = readw(&host->base->res_fifo);
|
||||
a = readl(&host->base->res_fifo) & 0xFFFF;
|
||||
b = readl(&host->base->res_fifo) & 0xFFFF;
|
||||
resp[i] = a << 16 | b;
|
||||
}
|
||||
} else {
|
||||
a = readw(&host->base->res_fifo);
|
||||
b = readw(&host->base->res_fifo);
|
||||
c = readw(&host->base->res_fifo);
|
||||
a = readl(&host->base->res_fifo) & 0xFFFF;
|
||||
b = readl(&host->base->res_fifo) & 0xFFFF;
|
||||
c = readl(&host->base->res_fifo) & 0xFFFF;
|
||||
resp[0] = a << 24 | b << 8 | c >> 8;
|
||||
}
|
||||
}
|
||||
@ -445,7 +445,7 @@ static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios)
|
||||
prescaler <<= 1;
|
||||
}
|
||||
|
||||
writew((prescaler << 4) | divider, &host->base->clk_rate);
|
||||
writel((prescaler << 4) | divider, &host->base->clk_rate);
|
||||
}
|
||||
|
||||
static void mxcmci_set_ios(struct mmc *mmc)
|
||||
@ -458,9 +458,9 @@ static void mxcmci_set_ios(struct mmc *mmc)
|
||||
|
||||
if (mmc->clock) {
|
||||
mxcmci_set_clk_rate(host, mmc->clock);
|
||||
writew(STR_STP_CLK_START_CLK, &host->base->str_stp_clk);
|
||||
writel(STR_STP_CLK_START_CLK, &host->base->str_stp_clk);
|
||||
} else {
|
||||
writew(STR_STP_CLK_STOP_CLK, &host->base->str_stp_clk);
|
||||
writel(STR_STP_CLK_STOP_CLK, &host->base->str_stp_clk);
|
||||
}
|
||||
|
||||
host->clock = mmc->clock;
|
||||
@ -472,7 +472,7 @@ static int mxcmci_init(struct mmc *mmc)
|
||||
|
||||
mxcmci_softreset(host);
|
||||
|
||||
host->rev_no = readw(&host->base->rev_no);
|
||||
host->rev_no = readl(&host->base->rev_no);
|
||||
if (host->rev_no != 0x400) {
|
||||
printf("wrong rev.no. 0x%08x. aborting.\n",
|
||||
host->rev_no);
|
||||
@ -480,7 +480,7 @@ static int mxcmci_init(struct mmc *mmc)
|
||||
}
|
||||
|
||||
/* recommended in data sheet */
|
||||
writew(0x2db4, &host->base->read_to);
|
||||
writel(0x2db4, &host->base->read_to);
|
||||
|
||||
writel(0, &host->base->int_cntr);
|
||||
|
||||
|
0
drivers/mtd/Makefile
Executable file → Normal file
0
drivers/mtd/Makefile
Executable file → Normal file
0
drivers/mtd/nand/spr_nand.c
Executable file → Normal file
0
drivers/mtd/nand/spr_nand.c
Executable file → Normal file
0
drivers/mtd/spr_smi.c
Executable file → Normal file
0
drivers/mtd/spr_smi.c
Executable file → Normal file
@ -388,7 +388,7 @@ int pci_hose_config_device(struct pci_controller *hose,
|
||||
|
||||
pci_hose_write_config_dword (hose, dev, PCI_COMMAND, 0);
|
||||
|
||||
for (bar = PCI_BASE_ADDRESS_0; bar < PCI_BASE_ADDRESS_5; bar += 4) {
|
||||
for (bar = PCI_BASE_ADDRESS_0; bar <= PCI_BASE_ADDRESS_5; bar += 4) {
|
||||
pci_hose_write_config_dword (hose, dev, bar, 0xffffffff);
|
||||
pci_hose_read_config_dword (hose, dev, bar, &bar_response);
|
||||
|
||||
|
0
drivers/serial/usbtty.h
Executable file → Normal file
0
drivers/serial/usbtty.h
Executable file → Normal file
0
drivers/usb/gadget/Makefile
Executable file → Normal file
0
drivers/usb/gadget/Makefile
Executable file → Normal file
0
drivers/usb/gadget/spr_udc.c
Executable file → Normal file
0
drivers/usb/gadget/spr_udc.c
Executable file → Normal file
@ -80,7 +80,7 @@ typedef struct at91_matrix {
|
||||
u32 mrcr; /* 0x100 Master Remap Control */
|
||||
u32 reserve4[3];
|
||||
#if defined(CONFIG_AT91SAM9G45)
|
||||
u32 ccr[52] /* 0x110 - 0x1E0 Chip Configuration */
|
||||
u32 ccr[52]; /* 0x110 - 0x1E0 Chip Configuration */
|
||||
u32 womr; /* 0x1E4 Write Protect Mode */
|
||||
u32 wpsr; /* 0x1E8 Write Protect Status */
|
||||
u32 resg45_1[10];
|
||||
|
0
include/asm-arm/arch-spear/spr_gpt.h
Executable file → Normal file
0
include/asm-arm/arch-spear/spr_gpt.h
Executable file → Normal file
0
include/asm-arm/arch-spear/spr_i2c.h
Executable file → Normal file
0
include/asm-arm/arch-spear/spr_i2c.h
Executable file → Normal file
0
include/asm-arm/arch-spear/spr_smi.h
Executable file → Normal file
0
include/asm-arm/arch-spear/spr_smi.h
Executable file → Normal file
0
include/asm-arm/arch-spear/spr_xloader_table.h
Executable file → Normal file
0
include/asm-arm/arch-spear/spr_xloader_table.h
Executable file → Normal file
0
include/configs/spear3xx.h
Executable file → Normal file
0
include/configs/spear3xx.h
Executable file → Normal file
0
include/configs/spear6xx.h
Executable file → Normal file
0
include/configs/spear6xx.h
Executable file → Normal file
0
include/usb/spr_udc.h
Executable file → Normal file
0
include/usb/spr_udc.h
Executable file → Normal file
@ -163,7 +163,7 @@ const uint32_t * ZEXPORT get_crc_table()
|
||||
#endif
|
||||
|
||||
/* ========================================================================= */
|
||||
# ifdef __LITTLE_ENDIAN
|
||||
# if __BYTE_ORDER == __LITTLE_ENDIAN
|
||||
# define DO_CRC(x) crc = tab[(crc ^ (x)) & 255] ^ (crc >> 8)
|
||||
# else
|
||||
# define DO_CRC(x) crc = tab[((crc >> 24) ^ (x)) & 255] ^ (crc << 8)
|
||||
|
0
lib_m68k/bootm.c
Executable file → Normal file
0
lib_m68k/bootm.c
Executable file → Normal file
23
net/tftp.c
23
net/tftp.c
@ -211,7 +211,7 @@ TftpSend (void)
|
||||
pkt += 5 /*strlen("octet")*/ + 1;
|
||||
strcpy ((char *)pkt, "timeout");
|
||||
pkt += 7 /*strlen("timeout")*/ + 1;
|
||||
sprintf((char *)pkt, "%lu", TIMEOUT / 1000);
|
||||
sprintf((char *)pkt, "%lu", TftpTimeoutMSecs / 1000);
|
||||
debug("send option \"timeout %s\"\n", (char *)pkt);
|
||||
pkt += strlen((char *)pkt) + 1;
|
||||
#ifdef CONFIG_TFTP_TSIZE
|
||||
@ -413,7 +413,6 @@ TftpHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len)
|
||||
}
|
||||
|
||||
TftpLastBlock = TftpBlock;
|
||||
TftpTimeoutMSecs = TIMEOUT;
|
||||
TftpTimeoutCountMax = TIMEOUT_COUNT;
|
||||
NetSetTimeout (TftpTimeoutMSecs, TftpTimeout);
|
||||
|
||||
@ -528,10 +527,25 @@ TftpStart (void)
|
||||
{
|
||||
char *ep; /* Environment pointer */
|
||||
|
||||
/* Allow the user to choose tftpblocksize */
|
||||
/*
|
||||
* Allow the user to choose TFTP blocksize and timeout.
|
||||
* TFTP protocol has a minimal timeout of 1 second.
|
||||
*/
|
||||
if ((ep = getenv("tftpblocksize")) != NULL)
|
||||
TftpBlkSizeOption = simple_strtol(ep, NULL, 10);
|
||||
debug("tftp block size is %i\n", TftpBlkSizeOption);
|
||||
|
||||
if ((ep = getenv("tftptimeout")) != NULL)
|
||||
TftpTimeoutMSecs = simple_strtol(ep, NULL, 10);
|
||||
|
||||
if (TftpTimeoutMSecs < 1000) {
|
||||
printf("TFTP timeout (%ld ms) too low, "
|
||||
"set minimum = 1000 ms\n",
|
||||
TftpTimeoutMSecs);
|
||||
TftpTimeoutMSecs = 1000;
|
||||
}
|
||||
|
||||
debug("TFTP blocksize = %i, timeout = %ld ms\n",
|
||||
TftpBlkSizeOption, TftpTimeoutMSecs);
|
||||
|
||||
TftpServerIP = NetServerIP;
|
||||
if (BootFile[0] == '\0') {
|
||||
@ -588,7 +602,6 @@ TftpStart (void)
|
||||
|
||||
puts ("Loading: *\b");
|
||||
|
||||
TftpTimeoutMSecs = TftpRRQTimeoutMSecs;
|
||||
TftpTimeoutCountMax = TftpRRQTimeoutCountMax;
|
||||
|
||||
NetSetTimeout (TftpTimeoutMSecs, TftpTimeout);
|
||||
|
Loading…
Reference in New Issue
Block a user