ARM: at91: sama5: move the common part of configurations to at91-sama5_common.h
Create a new configuration file: at91-sama5_common.h. Which includes the configurations that reused by all SAMA5 chips. at91-sama5_common.h includes: - hw macros (clock, text_base and etc.) - default commands. - BOOTARGS - U-Boot common configs. NOTE: NOR flash definition should be put before including the common header. For sama5d3-xplained: - add CMD_SETEXPR For sama5d3xek: - add CMD_SETEXPR - change CONFIG_SYS_MALLOC_LEN to (4*1024*1024) Signed-off-by: Josh Wu <josh.wu@atmel.com>
This commit is contained in:
Wu, Josh
Andreas Bießmann
parent
ff255e836a
commit
b2d387bceb
87
include/configs/at91-sama5_common.h
Normal file
87
include/configs/at91-sama5_common.h
Normal file
@ -0,0 +1,87 @@
|
||||
/*
|
||||
* Common part of configuration settings for the AT91 SAMA5 board.
|
||||
*
|
||||
* Copyright (C) 2015 Atmel Corporation
|
||||
* Josh Wu <josh.wu@atmel.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __AT91_SAMA5_COMMON_H
|
||||
#define __AT91_SAMA5_COMMON_H
|
||||
|
||||
#include <asm/hardware.h>
|
||||
|
||||
#define CONFIG_SYS_TEXT_BASE 0x26f00000
|
||||
|
||||
/* ARM asynchronous clock */
|
||||
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
|
||||
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
|
||||
|
||||
#define CONFIG_ARCH_CPU_INIT
|
||||
|
||||
#ifndef CONFIG_SPL_BUILD
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT
|
||||
#endif
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F
|
||||
#define CONFIG_DISPLAY_CPUINFO
|
||||
|
||||
#define CONFIG_CMD_BOOTZ
|
||||
#define CONFIG_OF_LIBFDT /* Device Tree support */
|
||||
|
||||
#define CONFIG_SYS_GENERIC_BOARD
|
||||
|
||||
/* general purpose I/O */
|
||||
#define CONFIG_AT91_GPIO
|
||||
|
||||
#define CONFIG_BOOTDELAY 3
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
#undef CONFIG_CMD_FPGA
|
||||
#undef CONFIG_CMD_IMI
|
||||
#undef CONFIG_CMD_LOADS
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_SETEXPR
|
||||
|
||||
#ifdef CONFIG_SYS_USE_MMC
|
||||
#define CONFIG_BOOTARGS \
|
||||
"console=ttyS0,115200 earlyprintk " \
|
||||
"root=/dev/mmcblk0p2 rw rootwait"
|
||||
#else
|
||||
#define CONFIG_BOOTARGS \
|
||||
"console=ttyS0,115200 earlyprintk " \
|
||||
"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
|
||||
"256K(env),256k(evn_redundent),256k(spare)," \
|
||||
"512k(dtb),6M(kernel)ro,-(rootfs) " \
|
||||
"rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
|
||||
#endif
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#define CONFIG_SYS_PROMPT "U-Boot> "
|
||||
#define CONFIG_SYS_CBSIZE 256
|
||||
#define CONFIG_SYS_MAXARGS 16
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
||||
sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
#define CONFIG_SYS_LONGHELP
|
||||
#define CONFIG_CMDLINE_EDITING
|
||||
#define CONFIG_AUTO_COMPLETE
|
||||
#define CONFIG_SYS_HUSH_PARSER
|
||||
|
||||
/* Size of malloc() pool */
|
||||
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
|
||||
|
||||
#endif
|
||||
@ -10,30 +10,10 @@
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#include <asm/hardware.h>
|
||||
/* No NOR flash, this definition should put before common header */
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
|
||||
#define CONFIG_SYS_TEXT_BASE 0x26f00000
|
||||
|
||||
/* ARM asynchronous clock */
|
||||
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
|
||||
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
|
||||
|
||||
#define CONFIG_ARCH_CPU_INIT
|
||||
|
||||
#ifndef CONFIG_SPL_BUILD
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT
|
||||
#endif
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F
|
||||
#define CONFIG_DISPLAY_CPUINFO
|
||||
|
||||
#define CONFIG_CMD_BOOTZ
|
||||
#define CONFIG_OF_LIBFDT /* Device Tree support */
|
||||
|
||||
#define CONFIG_SYS_GENERIC_BOARD
|
||||
|
||||
/* general purpose I/O */
|
||||
#define CONFIG_AT91_GPIO
|
||||
#include "at91-sama5_common.h"
|
||||
|
||||
/* serial console */
|
||||
#define CONFIG_ATMEL_USART
|
||||
@ -51,29 +31,6 @@
|
||||
*/
|
||||
#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP
|
||||
|
||||
#define CONFIG_BOOTDELAY 3
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
/* No NOR flash */
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
#undef CONFIG_CMD_FPGA
|
||||
#undef CONFIG_CMD_IMI
|
||||
#undef CONFIG_CMD_LOADS
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_DHCP
|
||||
|
||||
/* SDRAM */
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
|
||||
@ -181,34 +138,6 @@
|
||||
#define CONFIG_ENV_IS_NOWHERE
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SYS_USE_MMC
|
||||
#define CONFIG_BOOTARGS \
|
||||
"console=ttyS0,115200 earlyprintk " \
|
||||
"root=/dev/mmcblk0p2 rw rootwait"
|
||||
#else
|
||||
#define CONFIG_BOOTARGS \
|
||||
"console=ttyS0,115200 earlyprintk " \
|
||||
"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
|
||||
"256K(env),256k(evn_redundent),256k(spare)," \
|
||||
"512k(dtb),6M(kernel)ro,-(rootfs) " \
|
||||
"rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
|
||||
#endif
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#define CONFIG_SYS_PROMPT "U-Boot> "
|
||||
#define CONFIG_SYS_CBSIZE 256
|
||||
#define CONFIG_SYS_MAXARGS 16
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
||||
sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
#define CONFIG_SYS_LONGHELP
|
||||
#define CONFIG_CMDLINE_EDITING
|
||||
#define CONFIG_AUTO_COMPLETE
|
||||
#define CONFIG_SYS_HUSH_PARSER
|
||||
|
||||
/* Size of malloc() pool */
|
||||
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
|
||||
|
||||
/* SPL */
|
||||
#define CONFIG_SPL_FRAMEWORK
|
||||
#define CONFIG_SPL_TEXT_BASE 0x300000
|
||||
|
||||
@ -13,30 +13,11 @@
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#include <asm/hardware.h>
|
||||
|
||||
#define CONFIG_SYS_TEXT_BASE 0x26f00000
|
||||
|
||||
/* ARM asynchronous clock */
|
||||
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
|
||||
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
|
||||
|
||||
#define CONFIG_ARCH_CPU_INIT
|
||||
|
||||
#ifndef CONFIG_SPL_BUILD
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT
|
||||
#endif
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F
|
||||
#define CONFIG_DISPLAY_CPUINFO
|
||||
|
||||
#define CONFIG_CMD_BOOTZ
|
||||
#define CONFIG_OF_LIBFDT /* Device Tree support */
|
||||
|
||||
#define CONFIG_SYS_GENERIC_BOARD
|
||||
|
||||
/* general purpose I/O */
|
||||
#define CONFIG_AT91_GPIO
|
||||
/*
|
||||
* If has No NOR flash, please put the definition: CONFIG_SYS_NO_FLASH
|
||||
* before the common header.
|
||||
*/
|
||||
#include "at91-sama5_common.h"
|
||||
|
||||
/* serial console */
|
||||
#define CONFIG_ATMEL_USART
|
||||
@ -69,40 +50,17 @@
|
||||
/* board specific (not enough SRAM) */
|
||||
#define CONFIG_SAMA5D3_LCD_BASE 0x23E00000
|
||||
|
||||
#define CONFIG_BOOTDELAY 3
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
/* NOR flash */
|
||||
#ifndef CONFIG_SYS_NO_FLASH
|
||||
#define CONFIG_CMD_FLASH
|
||||
|
||||
#ifdef CONFIG_CMD_FLASH
|
||||
#define CONFIG_FLASH_CFI_DRIVER
|
||||
#define CONFIG_SYS_FLASH_CFI
|
||||
#define CONFIG_SYS_FLASH_PROTECTION
|
||||
#define CONFIG_SYS_FLASH_BASE 0x10000000
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 131
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
||||
#else
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
#undef CONFIG_CMD_FPGA
|
||||
#undef CONFIG_CMD_IMI
|
||||
#undef CONFIG_CMD_LOADS
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_DHCP
|
||||
|
||||
/* SDRAM */
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
|
||||
@ -228,34 +186,6 @@
|
||||
#define CONFIG_ENV_IS_NOWHERE
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SYS_USE_MMC
|
||||
#define CONFIG_BOOTARGS \
|
||||
"console=ttyS0,115200 earlyprintk " \
|
||||
"root=/dev/mmcblk0p2 rw rootwait"
|
||||
#else
|
||||
#define CONFIG_BOOTARGS \
|
||||
"console=ttyS0,115200 earlyprintk " \
|
||||
"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
|
||||
"256K(env),256k(evn_redundent),256k(spare)," \
|
||||
"512k(dtb),6M(kernel)ro,-(rootfs) " \
|
||||
"rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
|
||||
#endif
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#define CONFIG_SYS_PROMPT "U-Boot> "
|
||||
#define CONFIG_SYS_CBSIZE 256
|
||||
#define CONFIG_SYS_MAXARGS 16
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
||||
sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
#define CONFIG_SYS_LONGHELP
|
||||
#define CONFIG_CMDLINE_EDITING
|
||||
#define CONFIG_AUTO_COMPLETE
|
||||
#define CONFIG_SYS_HUSH_PARSER
|
||||
|
||||
/* Size of malloc() pool */
|
||||
#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
|
||||
|
||||
/* SPL */
|
||||
#define CONFIG_SPL_FRAMEWORK
|
||||
#define CONFIG_SPL_TEXT_BASE 0x300000
|
||||
|
||||
@ -10,59 +10,16 @@
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#include <asm/hardware.h>
|
||||
/* No NOR flash, this definition should put before common header */
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
|
||||
#define CONFIG_SYS_TEXT_BASE 0x26f00000
|
||||
|
||||
/* ARM asynchronous clock */
|
||||
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
|
||||
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
|
||||
|
||||
#define CONFIG_ARCH_CPU_INIT
|
||||
|
||||
#ifndef CONFIG_SPL_BUILD
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT
|
||||
#endif
|
||||
#define CONFIG_BOARD_EARLY_INIT_F
|
||||
#define CONFIG_DISPLAY_CPUINFO
|
||||
|
||||
#define CONFIG_CMD_BOOTZ
|
||||
#define CONFIG_OF_LIBFDT /* Device Tree support */
|
||||
|
||||
#define CONFIG_SYS_GENERIC_BOARD
|
||||
|
||||
/* general purpose I/O */
|
||||
#define CONFIG_AT91_GPIO
|
||||
#include "at91-sama5_common.h"
|
||||
|
||||
/* serial console */
|
||||
#define CONFIG_ATMEL_USART
|
||||
#define CONFIG_USART_BASE ATMEL_BASE_USART3
|
||||
#define CONFIG_USART_ID ATMEL_ID_USART3
|
||||
|
||||
#define CONFIG_BOOTDELAY 3
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
/* No NOR flash */
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
#undef CONFIG_CMD_FPGA
|
||||
#undef CONFIG_CMD_IMI
|
||||
#undef CONFIG_CMD_LOADS
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_SETEXPR
|
||||
|
||||
/* SDRAM */
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
|
||||
@ -199,33 +156,6 @@
|
||||
"bootz 0x22000000 - 0x21000000"
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SYS_USE_MMC
|
||||
#define CONFIG_BOOTARGS \
|
||||
"console=ttyS0,115200 earlyprintk " \
|
||||
"root=/dev/mmcblk0p2 rw rootwait"
|
||||
#else
|
||||
#define CONFIG_BOOTARGS \
|
||||
"console=ttyS0,115200 earlyprintk " \
|
||||
"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
|
||||
"256K(env),256k(evn_redundent),256k(spare)," \
|
||||
"512k(dtb),6M(kernel)ro,-(rootfs) " \
|
||||
"rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
|
||||
#endif
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#define CONFIG_SYS_PROMPT "U-Boot> "
|
||||
#define CONFIG_SYS_CBSIZE 256
|
||||
#define CONFIG_SYS_MAXARGS 16
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
||||
sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
#define CONFIG_SYS_LONGHELP
|
||||
#define CONFIG_CMDLINE_EDITING
|
||||
#define CONFIG_AUTO_COMPLETE
|
||||
#define CONFIG_SYS_HUSH_PARSER
|
||||
|
||||
/* Size of malloc() pool */
|
||||
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
|
||||
|
||||
|
||||
/* SPL */
|
||||
|
||||
@ -10,59 +10,16 @@
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#include <asm/hardware.h>
|
||||
/* No NOR flash, this definition should put before common header */
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
|
||||
#define CONFIG_SYS_TEXT_BASE 0x26f00000
|
||||
|
||||
/* ARM asynchronous clock */
|
||||
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
|
||||
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
|
||||
|
||||
#define CONFIG_ARCH_CPU_INIT
|
||||
|
||||
#ifndef CONFIG_SPL_BUILD
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT
|
||||
#endif
|
||||
#define CONFIG_BOARD_EARLY_INIT_F
|
||||
#define CONFIG_DISPLAY_CPUINFO
|
||||
|
||||
#define CONFIG_CMD_BOOTZ
|
||||
#define CONFIG_OF_LIBFDT /* Device Tree support */
|
||||
|
||||
#define CONFIG_SYS_GENERIC_BOARD
|
||||
|
||||
/* general purpose I/O */
|
||||
#define CONFIG_AT91_GPIO
|
||||
#include "at91-sama5_common.h"
|
||||
|
||||
/* serial console */
|
||||
#define CONFIG_ATMEL_USART
|
||||
#define CONFIG_USART_BASE ATMEL_BASE_USART3
|
||||
#define CONFIG_USART_ID ATMEL_ID_USART3
|
||||
|
||||
#define CONFIG_BOOTDELAY 3
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
/* No NOR flash */
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
#undef CONFIG_CMD_FPGA
|
||||
#undef CONFIG_CMD_IMI
|
||||
#undef CONFIG_CMD_LOADS
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_SETEXPR
|
||||
|
||||
/* SDRAM */
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
|
||||
@ -197,35 +154,6 @@
|
||||
"bootz 0x22000000 - 0x21000000"
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SYS_USE_MMC
|
||||
#define CONFIG_BOOTARGS \
|
||||
"console=ttyS0,115200 earlyprintk " \
|
||||
"root=/dev/mmcblk0p2 rw rootwait"
|
||||
#else
|
||||
#define CONFIG_BOOTARGS \
|
||||
"console=ttyS0,115200 earlyprintk " \
|
||||
"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
|
||||
"256K(env),256k(evn_redundent),256k(spare)," \
|
||||
"512k(dtb),6M(kernel)ro,-(rootfs) " \
|
||||
"rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
|
||||
#endif
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#define CONFIG_SYS_PROMPT "U-Boot> "
|
||||
#define CONFIG_SYS_CBSIZE 256
|
||||
#define CONFIG_SYS_MAXARGS 16
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
||||
sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
#define CONFIG_SYS_LONGHELP
|
||||
#define CONFIG_CMDLINE_EDITING
|
||||
#define CONFIG_AUTO_COMPLETE
|
||||
#define CONFIG_SYS_HUSH_PARSER
|
||||
|
||||
/* Size of malloc() pool */
|
||||
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
|
||||
|
||||
|
||||
/* SPL */
|
||||
#define CONFIG_SPL_FRAMEWORK
|
||||
#define CONFIG_SPL_TEXT_BASE 0x200000
|
||||
|
||||
Loading…
Reference in New Issue
Block a user