diff --git a/arch/arm/cpu/armv7/mx7/Kconfig b/arch/arm/cpu/armv7/mx7/Kconfig
index dd513842ea..5fdc8dd583 100644
--- a/arch/arm/cpu/armv7/mx7/Kconfig
+++ b/arch/arm/cpu/armv7/mx7/Kconfig
@@ -27,12 +27,19 @@ config TARGET_WARP7
 	select DM
 	select DM_THERMAL
 
+config TARGET_COLIBRI_IMX7
+	bool "Support Colibri iMX7S/iMX7D modules"
+	select DM
+	select DM_SERIAL
+	select DM_THERMAL
+
 endchoice
 
 config SYS_SOC
 	default "mx7"
 
 source "board/freescale/mx7dsabresd/Kconfig"
+source "board/toradex/colibri_imx7/Kconfig"
 source "board/warp7/Kconfig"
 
 endif
diff --git a/board/toradex/colibri_imx7/Kconfig b/board/toradex/colibri_imx7/Kconfig
new file mode 100644
index 0000000000..7bba26b90d
--- /dev/null
+++ b/board/toradex/colibri_imx7/Kconfig
@@ -0,0 +1,20 @@
+if TARGET_COLIBRI_IMX7
+
+config SYS_BOARD
+	default "colibri_imx7"
+
+config SYS_VENDOR
+	default "toradex"
+
+config SYS_CONFIG_NAME
+	default "colibri_imx7"
+
+config COLIBRI_IMX7_EXT_PHYCLK
+	bool "External oscillator for Ethernet PHY clock provided"
+	help
+	  Select this if your module provides a external Ethernet PHY
+	  clock source.
+	default y
+
+
+endif
diff --git a/board/toradex/colibri_imx7/MAINTAINERS b/board/toradex/colibri_imx7/MAINTAINERS
new file mode 100644
index 0000000000..5ffb2417aa
--- /dev/null
+++ b/board/toradex/colibri_imx7/MAINTAINERS
@@ -0,0 +1,6 @@
+Colibri iMX7
+M:	Stefan Agner <stefan.agner@toradex.com>
+S:	Maintained
+F:	board/toradex/colibri_imx7/
+F:	include/configs/colibri_imx7.h
+F:	configs/colibri_imx7_defconfig
diff --git a/board/toradex/colibri_imx7/Makefile b/board/toradex/colibri_imx7/Makefile
new file mode 100644
index 0000000000..ea597dec28
--- /dev/null
+++ b/board/toradex/colibri_imx7/Makefile
@@ -0,0 +1,6 @@
+# Copyright (C) 2016 Toradex AG
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y  := colibri_imx7.o
diff --git a/board/toradex/colibri_imx7/colibri_imx7.c b/board/toradex/colibri_imx7/colibri_imx7.c
new file mode 100644
index 0000000000..8eedd65bf0
--- /dev/null
+++ b/board/toradex/colibri_imx7/colibri_imx7.c
@@ -0,0 +1,420 @@
+/*
+ * Copyright (C) 2016 Toradex AG
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/mx7-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/mxc_i2c.h>
+#include <asm/io.h>
+#include <common.h>
+#include <dm.h>
+#include <dm/platform_data/serial_mxc.h>
+#include <fsl_esdhc.h>
+#include <i2c.h>
+#include <linux/sizes.h>
+#include <mmc.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <usb/ehci-ci.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL  (PAD_CTL_DSE_3P3V_49OHM | \
+	PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS)
+
+#define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
+	PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM)
+
+#define ENET_PAD_CTRL  (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM)
+#define ENET_PAD_CTRL_MII  (PAD_CTL_DSE_3P3V_32OHM)
+
+#define ENET_RX_PAD_CTRL  (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM)
+
+#define I2C_PAD_CTRL    (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
+	PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU100KOHM)
+
+#define LCD_PAD_CTRL    (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \
+	PAD_CTL_DSE_3P3V_49OHM)
+
+#define NAND_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_SRE_SLOW | PAD_CTL_HYS)
+
+#define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUS_PU5KOHM)
+
+#ifdef CONFIG_SYS_I2C_MXC
+#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
+/* I2C1 for PMIC */
+static struct i2c_pads_info i2c_pad_info1 = {
+	.scl = {
+		.i2c_mode = MX7D_PAD_GPIO1_IO04__I2C1_SCL | PC,
+		.gpio_mode = MX7D_PAD_GPIO1_IO04__GPIO1_IO4 | PC,
+		.gp = IMX_GPIO_NR(1, 4),
+	},
+	.sda = {
+		.i2c_mode = MX7D_PAD_GPIO1_IO05__I2C1_SDA | PC,
+		.gpio_mode = MX7D_PAD_GPIO1_IO05__GPIO1_IO5 | PC,
+		.gp = IMX_GPIO_NR(1, 5),
+	},
+};
+/* I2C4 for Colibri I2C */
+static struct i2c_pads_info i2c_pad_info4 = {
+	.scl = {
+		.i2c_mode = MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL | PC,
+		.gpio_mode = MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8 | PC,
+		.gp = IMX_GPIO_NR(7, 8),
+	},
+	.sda = {
+		.i2c_mode = MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA | PC,
+		.gpio_mode = MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9 | PC,
+		.gp = IMX_GPIO_NR(7, 9),
+	},
+};
+#endif
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
+
+	return 0;
+}
+
+static iomux_v3_cfg_t const uart1_pads[] = {
+	MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS | MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const usdhc1_pads[] = {
+	MX7D_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD1_DATA0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD1_DATA1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD1_DATA2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD1_DATA3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+
+	MX7D_PAD_GPIO1_IO00__GPIO1_IO0 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+#ifdef CONFIG_NAND_MXS
+static iomux_v3_cfg_t const gpmi_pads[] = {
+	MX7D_PAD_SD3_DATA0__NAND_DATA00 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA1__NAND_DATA01 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA2__NAND_DATA02 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA3__NAND_DATA03 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA4__NAND_DATA04 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA5__NAND_DATA05 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA6__NAND_DATA06 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA7__NAND_DATA07 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_CLK__NAND_CLE	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_CMD__NAND_ALE	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_STROBE__NAND_RE_B	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_RESET_B__NAND_WE_B	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SAI1_TX_DATA__NAND_READY_B	| MUX_PAD_CTRL(NAND_PAD_READY0_CTRL),
+};
+
+static void setup_gpmi_nand(void)
+{
+	imx_iomux_v3_setup_multiple_pads(gpmi_pads, ARRAY_SIZE(gpmi_pads));
+
+	/* NAND_USDHC_BUS_CLK is set in rom */
+	set_clk_nand();
+}
+#endif
+
+static iomux_v3_cfg_t const usdhc3_emmc_pads[] = {
+	MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_STROBE__SD3_STROBE	 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+
+	MX7D_PAD_SD3_RESET_B__GPIO6_IO11 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+#ifdef CONFIG_VIDEO_MXS
+static iomux_v3_cfg_t const lcd_pads[] = {
+	MX7D_PAD_LCD_CLK__LCD_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_ENABLE__LCD_ENABLE | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_HSYNC__LCD_HSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_VSYNC__LCD_VSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA00__LCD_DATA0 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA01__LCD_DATA1 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA02__LCD_DATA2 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA03__LCD_DATA3 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA04__LCD_DATA4 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA05__LCD_DATA5 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA06__LCD_DATA6 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA07__LCD_DATA7 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA08__LCD_DATA8 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA09__LCD_DATA9 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA10__LCD_DATA10 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA11__LCD_DATA11 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA12__LCD_DATA12 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA13__LCD_DATA13 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA14__LCD_DATA14 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA15__LCD_DATA15 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA16__LCD_DATA16 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX7D_PAD_LCD_DATA17__LCD_DATA17 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const backlight_pads[] = {
+	/* Backlight On */
+	MX7D_PAD_SD1_WP__GPIO5_IO1 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	/* Backlight PWM<A> (multiplexed pin) */
+	MX7D_PAD_GPIO1_IO08__GPIO1_IO8   | MUX_PAD_CTRL(NO_PAD_CTRL),
+	MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+#define GPIO_BL_ON IMX_GPIO_NR(5, 1)
+#define GPIO_PWM_A IMX_GPIO_NR(1, 8)
+
+static int setup_lcd(void)
+{
+	imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
+
+	imx_iomux_v3_setup_multiple_pads(backlight_pads, ARRAY_SIZE(backlight_pads));
+
+	/* Set BL_ON */
+	gpio_request(GPIO_BL_ON, "BL_ON");
+	gpio_direction_output(GPIO_BL_ON, 1);
+
+	/* Set PWM<A> to full brightness (assuming inversed polarity) */
+	gpio_request(GPIO_PWM_A, "PWM<A>");
+	gpio_direction_output(GPIO_PWM_A, 0);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_FEC_MXC
+static iomux_v3_cfg_t const fec1_pads[] = {
+#ifndef CONFIG_COLIBRI_IMX7_EXT_PHYCLK
+	MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 | MUX_PAD_CTRL(ENET_PAD_CTRL) | MUX_MODE_SION,
+#else
+	MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+#endif
+	MX7D_PAD_SD2_CD_B__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL_MII),
+	MX7D_PAD_SD2_WP__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL_MII),
+	MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
+	MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
+	MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
+	MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	  | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
+	MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
+};
+
+static void setup_iomux_fec(void)
+{
+	imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads));
+}
+#endif
+
+static void setup_iomux_uart(void)
+{
+	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+
+#ifdef CONFIG_FSL_ESDHC
+
+#define USDHC1_CD_GPIO	IMX_GPIO_NR(1, 0)
+
+static struct fsl_esdhc_cfg usdhc_cfg[] = {
+	{USDHC1_BASE_ADDR, 0, 4},
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	int ret = 0;
+
+	switch (cfg->esdhc_base) {
+	case USDHC1_BASE_ADDR:
+		ret = !gpio_get_value(USDHC1_CD_GPIO);
+		break;
+	}
+
+	return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	int i, ret;
+	/* USDHC1 is mmc0 */
+	for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
+		switch (i) {
+		case 0:
+			imx_iomux_v3_setup_multiple_pads(
+				usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
+			gpio_request(USDHC1_CD_GPIO, "usdhc1_cd");
+			gpio_direction_input(USDHC1_CD_GPIO);
+			usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+			break;
+		default:
+			printf("Warning: you configured more USDHC controllers"
+				"(%d) than supported by the board\n", i + 1);
+			return -EINVAL;
+		}
+
+		ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_FEC_MXC
+int board_eth_init(bd_t *bis)
+{
+	int ret;
+
+	setup_iomux_fec();
+
+	ret = fecmxc_initialize_multi(bis, 0,
+		CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE);
+	if (ret)
+		printf("FEC1 MXC: %s:failed\n", __func__);
+
+	return ret;
+}
+
+static int setup_fec(void)
+{
+	struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs
+		= (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
+
+#ifndef CONFIG_COLIBRI_IMX7_EXT_PHYCLK
+	/*
+	 * Use 50M anatop REF_CLK1 for ENET1, clear gpr1[13], set gpr1[17]
+	 * and output it on the pin
+	 */
+	clrsetbits_le32(&iomuxc_gpr_regs->gpr[1],
+			IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK,
+			IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK);
+#else
+	/* Use 50M external CLK for ENET1, set gpr1[13], clear gpr1[17] */
+	clrsetbits_le32(&iomuxc_gpr_regs->gpr[1],
+			IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK,
+			IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK);
+#endif
+
+	return set_clk_enet(ENET_50MHz);
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+	if (phydev->drv->config)
+		phydev->drv->config(phydev);
+	return 0;
+}
+#endif
+
+int board_early_init_f(void)
+{
+	setup_iomux_uart();
+
+#ifdef CONFIG_SYS_I2C_MXC
+	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+	setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info4);
+#endif
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+#ifdef CONFIG_FEC_MXC
+	setup_fec();
+#endif
+
+#ifdef CONFIG_NAND_MXS
+	setup_gpmi_nand();
+#endif
+
+#ifdef CONFIG_VIDEO_MXS
+	setup_lcd();
+#endif
+
+	return 0;
+}
+
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+	/* 4 bit bus width */
+	{"nand", MAKE_CFGVAL(0x40, 0x34, 0x00, 0x00)},
+	{"sd1", MAKE_CFGVAL(0x10, 0x10, 0x00, 0x00)},
+	{NULL, 0},
+};
+#endif
+
+int board_late_init(void)
+{
+#ifdef CONFIG_CMD_BMODE
+	add_board_boot_modes(board_boot_modes);
+#endif
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	printf("Model: Toradex Colibri iMX7%c\n",
+	       is_cpu_type(MXC_CPU_MX7D) ? 'D' : 'S');
+
+	return 0;
+}
+
+#ifdef CONFIG_USB_EHCI_MX7
+static iomux_v3_cfg_t const usb_otg2_pads[] = {
+	MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+int board_ehci_hcd_init(int port)
+{
+	switch (port) {
+	case 0:
+		break;
+	case 1:
+		if (is_cpu_type(MXC_CPU_MX7S))
+			return -ENODEV;
+
+		imx_iomux_v3_setup_multiple_pads(usb_otg2_pads,
+						 ARRAY_SIZE(usb_otg2_pads));
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+#endif
+
+static struct mxc_serial_platdata mxc_serial_plat = {
+	.reg = (struct mxc_uart *)UART1_IPS_BASE_ADDR,
+	.use_dte = true,
+};
+
+U_BOOT_DEVICE(mxc_serial) = {
+	.name = "serial_mxc",
+	.platdata = &mxc_serial_plat,
+};
diff --git a/board/toradex/colibri_imx7/imximage.cfg b/board/toradex/colibri_imx7/imximage.cfg
new file mode 100644
index 0000000000..d891e82ae4
--- /dev/null
+++ b/board/toradex/colibri_imx7/imximage.cfg
@@ -0,0 +1,150 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *               2015 Toradex AG
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+#define __ASSEMBLY__
+#include <config.h>
+
+/* image version */
+
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : sd
+ */
+
+BOOT_FROM	sd
+
+/*
+ * Secure boot support
+ */
+#ifdef CONFIG_SECURE_BOOT
+CSF CONFIG_CSF_SIZE
+#endif
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *	Addr-type register length (1,2 or 4 bytes)
+ *	Address	  absolute address of the register
+ *	value	  value to be stored in the register
+ */
+
+/* IOMUXC_GPR_GPR1 */
+DATA 4 0x30340004 0x4F400005
+
+/* DDR3L */
+/* assuming MEMC_FREQ_RATIO = 2 */
+/* SRC_DDRC_RCR */
+DATA 4 0x30391000 0x00000002
+/* DDRC_MSTR */
+DATA 4 0x307a0000 0x01040001
+/* DDRC_DFIUPD0 */
+DATA 4 0x307a01a0 0x80400003
+/* DDRC_DFIUPD1 */
+DATA 4 0x307a01a4 0x00100020
+/* DDRC_DFIUPD2 */
+DATA 4 0x307a01a8 0x80100004
+/* DDRC_RFSHTMG */
+DATA 4 0x307a0064 0x00400045
+/* DDRC_MP_PCTRL_0 */
+DATA 4 0x307a0490 0x00000001
+/* DDRC_INIT0 */
+DATA 4 0x307a00d0 0x00020083
+/* DDRC_INIT1 */
+DATA 4 0x307a00d4 0x00690000
+/* DDRC_INIT3 MR0/MR1 */
+DATA 4 0x307a00dc 0x09300004
+/* DDRC_INIT4 MR2/MR3 */
+DATA 4 0x307a00e0 0x04480000
+/* DDRC_INIT5 */
+DATA 4 0x307a00e4 0x00100004
+/* DDRC_RANKCTL */
+DATA 4 0x307a00f4 0x0000033f
+/* DDRC_DRAMTMG0 */
+DATA 4 0x307a0100 0x090b090a
+/* DDRC_DRAMTMG1 */
+DATA 4 0x307a0104 0x000d020d
+/* DDRC_DRAMTMG2 */
+DATA 4 0x307a0108 0x03040307
+/* DDRC_DRAMTMG3 */
+DATA 4 0x307a010c 0x00002006
+/* DDRC_DRAMTMG4 */
+DATA 4 0x307a0110 0x04020205
+/* DDRC_DRAMTMG5 */
+DATA 4 0x307a0114 0x03030202
+/* DDRC_DRAMTMG8 */
+DATA 4 0x307a0120 0x00000803
+/* DDRC_ZQCTL0 */
+DATA 4 0x307a0180 0x00800020
+/* DDRC_ZQCTL1 */
+DATA 4 0x307a0184 0x02001000
+/* DDRC_DFITMG0 */
+DATA 4 0x307a0190 0x02098204
+/* DDRC_DFITMG1 */
+DATA 4 0x307a0194 0x00030303
+/* DDRC_ADDRMAP0 */
+DATA 4 0x307a0200 0x0000001f
+/* DDRC_ADDRMAP1 */
+DATA 4 0x307a0204 0x00080808
+/* DDRC_ADDRMAP5 */
+DATA 4 0x307a0214 0x07070707
+/* DDRC_ADDRMAP6 */
+DATA 4 0x307a0218 0x07070707
+/* DDRC_ODTCFG */
+DATA 4 0x307a0240 0x06000601
+/* DDRC_ODTMAP */
+DATA 4 0x307a0244 0x00000011
+/* SRC_DDRC_RCR */
+DATA 4 0x30391000 0x00000000
+/* DDR_PHY_PHY_CON0 */
+DATA 4 0x30790000 0x17420f40
+/* DDR_PHY_PHY_CON1 */
+DATA 4 0x30790004 0x10210100
+/* DDR_PHY_PHY_CON4 */
+DATA 4 0x30790010 0x00060807
+/* DDR_PHY_MDLL_CON0 */
+DATA 4 0x307900b0 0x1010007e
+/* DDR_PHY_DRVDS_CON0 */
+DATA 4 0x3079009c 0x00000d6e
+/* DDR_PHY_OFFSET_RD_CON0 */
+DATA 4 0x30790020 0x08080808
+/* DDR_PHY_OFFSET_WR_CON0 */
+DATA 4 0x30790030 0x08080808
+/* DDR_PHY_CMD_SDLL_CON0 */
+DATA 4 0x30790050 0x01000010
+DATA 4 0x30790050 0x00000010
+
+/* DDR_PHY_ZQ_CON0 */
+DATA 4 0x307900c0 0x0e407304
+DATA 4 0x307900c0 0x0e447304
+DATA 4 0x307900c0 0x0e447306
+/* DDR_PHY_ZQ_CON1 */
+CHECK_BITS_SET 4 0x307900c4 0x1
+/* DDR_PHY_ZQ_CON0 */
+DATA 4 0x307900c0 0x0e447304
+DATA 4 0x307900c0 0x0e407304
+
+/* CCM_CCGRn */
+DATA 4 0x30384130 0x00000000
+/* IOMUXC_GPR_GPR8 */
+DATA 4 0x30340020 0x00000178
+/* CCM_CCGRn */
+DATA 4 0x30384130 0x00000002
+/* DDR_PHY_LP_CON0 */
+DATA 4 0x30790018 0x0000000f
+
+/* DDRC_STAT */
+CHECK_BITS_SET 4 0x307a0004 0x1
diff --git a/configs/colibri_imx7_defconfig b/configs/colibri_imx7_defconfig
new file mode 100644
index 0000000000..50c120168d
--- /dev/null
+++ b/configs/colibri_imx7_defconfig
@@ -0,0 +1,40 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX7=y
+CONFIG_TARGET_COLIBRI_IMX7=y
+CONFIG_IMX_RDC=y
+CONFIG_IMX_BOOTAUX=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_imx7/imximage.cfg,MX7D"
+CONFIG_BOOTDELAY=1
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="Colibri iMX7 # "
+# CONFIG_CMD_BOOTD is not set
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_GADGET=y
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Toradex"
+CONFIG_G_DNL_VENDOR_NUM=0x1b67
+CONFIG_G_DNL_PRODUCT_NUM=0x4020
+CONFIG_OF_LIBFDT=y
diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
new file mode 100644
index 0000000000..9da219c9c7
--- /dev/null
+++ b/include/configs/colibri_imx7.h
@@ -0,0 +1,247 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * Configuration settings for the Colibri iMX7 module.
+ *
+ * based on mx7dsabresd.h:
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __COLIBRI_IMX7_CONFIG_H
+#define __COLIBRI_IMX7_CONFIG_H
+
+#include "mx7_common.h"
+
+#define CONFIG_SYS_THUMB_BUILD
+#define CONFIG_USE_ARCH_MEMCPY
+#define CONFIG_USE_ARCH_MEMSET
+
+/*#define CONFIG_DBG_MONITOR*/
+#define PHYS_SDRAM_SIZE			SZ_512M
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
+
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)
+
+/* Uncomment to enable secure boot support */
+/* #define CONFIG_SECURE_BOOT */
+#define CONFIG_CSF_SIZE			0x4000
+
+#define CONFIG_CMD_BMODE
+
+/* Network */
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define CONFIG_FEC_XCV_TYPE             RMII
+#define CONFIG_ETHPRIME                 "FEC"
+#define CONFIG_FEC_MXC_PHYADDR          0
+
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+#define CONFIG_TFTP_TSIZE
+#define CONFIG_IP_DEFRAG
+#define CONFIG_TFTP_BLOCKSIZE		16384
+
+/* ENET1 */
+#define IMX_FEC_BASE			ENET_IPS_BASE_ADDR
+
+/* MMC Config*/
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CONFIG_SYS_FSL_USDHC_NUM	1
+
+#undef CONFIG_BOOTM_PLAN9
+#undef CONFIG_BOOTM_RTEMS
+
+/* I2C configs */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_SPEED		100000
+
+#define CONFIG_IPADDR			192.168.10.2
+#define CONFIG_NETMASK			255.255.255.0
+#define CONFIG_SERVERIP			192.168.10.1
+
+#define MEM_LAYOUT_ENV_SETTINGS \
+	"fdt_addr_r=0x82000000\0" \
+	"fdt_high=0xffffffff\0" \
+	"initrd_high=0xffffffff\0" \
+	"kernel_addr_r=0x81000000\0" \
+	"ramdisk_addr_r=0x82100000\0"
+
+#define SD_BOOTCMD \
+	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0"	\
+	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
+	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
+	"run m4boot && " \
+	"load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
+	"load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
+	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+
+#define NFS_BOOTCMD \
+	"nfsargs=ip=:::::eth0: root=/dev/nfs\0"	\
+	"nfsboot=run setup; " \
+		"setenv bootargs ${defargs} ${nfsargs} " \
+		"${setupargs} ${vidargs}; echo Booting from NFS...;" \
+		"dhcp ${kernel_addr_r} && "	\
+		"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
+		"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+
+#define UBI_BOOTCMD	\
+	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
+		"ubi.fm_autoconvert=1\0" \
+	"ubiboot=run setup; " \
+		"setenv bootargs ${defargs} ${ubiargs} " \
+		"${setupargs} ${vidargs}; echo Booting from NAND...; " \
+		"ubi part ubi && run m4boot && " \
+		"ubi read ${kernel_addr_r} kernel && " \
+		"ubi read ${fdt_addr_r} dtb && " \
+		"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+
+#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	MEM_LAYOUT_ENV_SETTINGS \
+	NFS_BOOTCMD \
+	SD_BOOTCMD \
+	UBI_BOOTCMD \
+	"console=ttymxc0\0" \
+	"defargs=\0" \
+	"fdt_board=eval-v3\0" \
+	"fdt_fixup=;\0" \
+	"m4boot=;\0" \
+	"ip_dyn=yes\0" \
+	"kernel_file=zImage\0" \
+	"mtdparts=" MTDPARTS_DEFAULT "\0" \
+	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
+		"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
+		"${board}/flash_eth.img && source ${loadaddr}\0" \
+	"setsdupdate=mmc rescan && setenv interface mmc && " \
+		"fatload ${interface} 0:1 ${loadaddr} " \
+		"${board}/flash_blk.img && source ${loadaddr}\0" \
+	"setup=setenv setupargs " \
+		"console=tty1 console=${console}" \
+		",${baudrate}n8 ${memargs} consoleblank=0 ${mtdparts}\0" \
+	"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
+	"setusbupdate=usb start && setenv interface usb && " \
+		"fatload ${interface} 0:1 ${loadaddr} " \
+		"${board}/flash_blk.img && source ${loadaddr}\0" \
+	"splashpos=m,m\0" \
+	"videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP
+
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x0c000000)
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+#define CONFIG_SYS_HZ			1000
+
+#define CONFIG_STACKSIZE		SZ_128K
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_IN_NAND
+
+#if defined(CONFIG_ENV_IS_IN_MMC)
+#define CONFIG_SYS_MMC_ENV_DEV		0   /* USDHC1 */
+#define CONFIG_SYS_MMC_ENV_PART		0	/* user area */
+#define CONFIG_MMCROOT			"/dev/mmcblk0p2"  /* USDHC1 */
+#define CONFIG_ENV_OFFSET		(8 * SZ_64K)
+#elif defined(CONFIG_ENV_IS_IN_NAND)
+#define CONFIG_ENV_OFFSET		(4 * 1024 * 1024)
+#define CONFIG_ENV_SECT_SIZE		(128 * 1024)
+#define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
+#endif
+
+#define CONFIG_NAND_MXS
+#define CONFIG_CMD_NAND_TRIMFFS
+
+/* NAND stuff */
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0x40000000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
+#define CONFIG_CMD_NAND_TORTURE
+
+/* UBI stuff */
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_CMD_UBI
+#define CONFIG_MTD_UBI_FASTMAP
+#define CONFIG_CMD_UBIFS	/* increases size by almost 60 KB */
+
+/* Dynamic MTD partition support */
+#define CONFIG_CMD_MTDPARTS	/* Enable 'mtdparts' command line support */
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
+#define MTDIDS_DEFAULT		"nand0=gpmi-nand"
+#define MTDPARTS_DEFAULT	"mtdparts=gpmi-nand:"		\
+				"512k(mx7-bcb),"		\
+				"3584k(u-boot)ro,"		\
+				"512k(u-boot-env),"		\
+				"-(ubi)"
+
+/* DMA stuff, needed for GPMI/MXS NAND support */
+#define CONFIG_APBH_DMA
+#define CONFIG_APBH_DMA_BURST
+#define CONFIG_APBH_DMA_BURST8
+
+/* USB Configs */
+#define CONFIG_USB_STORAGE
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+
+#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS		0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+
+#define CONFIG_IMX_THERMAL
+
+#define CONFIG_USBD_HS
+
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+
+/* USB Device Firmware Update support */
+#define CONFIG_USB_FUNCTION_DFU
+#define CONFIG_DFU_MMC
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE	SZ_16M
+#define DFU_DEFAULT_POLL_TIMEOUT	300
+
+#define CONFIG_VIDEO
+#ifdef CONFIG_VIDEO
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_MXS
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_VIDEO_BMP_LOGO
+#endif
+
+#endif