leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

BeagleBoard: Remove userbutton command and use gpio command instead

Browse Source 
Remove userbutton command and do the detection in board config file using the gpio command

Signed-off-by: Joel A Fernandes <agnel.joel@gmail.com>
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
This commit is contained in:
Joel Fernandes 2011-09-11 08:37:33 +00:00 committed by Albert ARIBAUD
parent c8da405c85
commit aae58b954b
2 changed files with 9 additions and 57 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

55
board/ti/beagle/beagle.c
View File

@ -507,58 +507,3 @@ int ehci_hcd_stop(void)
}
#endif /* CONFIG_USB_EHCI */
#ifndef CONFIG_SPL_BUILD
/*
* This command returns the status of the user button on beagle xM
* Input - none
* Returns - 1 if button is held down
* 0 if button is not held down
*/
int do_userbutton(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int button = 0;
int gpio;
/*
* pass address parameter as argv[0] (aka command name),
* and all remaining args
*/
switch (get_board_revision()) {
case REVISION_AXBX:
case REVISION_CX:
case REVISION_C4:
gpio = 7;
break;
case REVISION_XM_A:
case REVISION_XM_B:
case REVISION_XM_C:
default:
gpio = 4;
break;
}
gpio_request(gpio, "");
gpio_direction_input(gpio);
printf("The user button is currently ");
if (gpio_get_value(gpio))
{
button = 1;
printf("PRESSED.\n");
}
else
{
button = 0;
printf("NOT pressed.\n");
}
return !button;
}
/* -------------------------------------------------------------------- */
U_BOOT_CMD(
userbutton, CONFIG_SYS_MAXARGS, 1, do_userbutton,
"Return the status of the BeagleBoard USER button",
""
);
#endif

11
include/configs/omap3_beagle.h
View File

@ -167,6 +167,7 @@
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_SETEXPR /* Evaluate expressions */
#define CONFIG_CMD_GPIO /* Enable gpio command */
#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
@ -280,10 +281,16 @@
"ramboot=echo Booting from ramdisk ...; " \
"run ramargs; " \
"bootm ${loadaddr}\0" \
"userbutton=if gpio input 173; then run userbutton_xm; " \
"else run userbutton_nonxm; fi;\0" \
"userbutton_xm=gpio input 4;\0" \
"userbutton_nonxm=gpio input 7;\0"
/* "run userbutton" will return 1 (false) if is pressed and 0 (false) if not */
#define CONFIG_BOOTCOMMAND \
"if mmc rescan ${mmcdev}; then " \
"if userbutton; then " \
"if run userbutton; then " \
"setenv bootenv uEnv.txt;" \
"else " \
"setenv bootenv user.txt;" \
"fi;" \
"echo SD/MMC found on device ${mmcdev};" \