leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mmc: i.MX6: fsl_esdhc: Define maximum bus width supported by a board

Browse Source 
Maximum bus width supported by some i.MX6 boards is not 8bit like
others. In case where both host controller and card support 8bit transfers,
they agree to communicate on 8bit interface while some boards support only 4bit interface.
Due to this reason the mmc 8bit default mode fails on these boards. To rectify this,
define maximum bus width supported by these boards (4bit). If max_bus_width is not
defined, it is 0 by default and 8bit width support will be enabled in host
capabilities otherwise host capabilities are modified accordingly.

It is tested with a MMCplus card.

Signed-off-by: Abbas Raza <Abbas_Raza@mentor.com>
cc: stefano Babic <sbabic@denx.de>
cc: Andy Fleming <afleming@gmail.com>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
This commit is contained in:
Abbas Raza 2013-03-25 09:13:34 +00:00 committed by Stefano Babic
parent 2feae93ac0
commit aad4659a2f
5 changed files with 16 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
board/boundary/nitrogen6x/nitrogen6x.c
View File

@ -304,6 +304,9 @@ int board_mmc_init(bd_t *bis)
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
usdhc_cfg[0].max_bus_width = 4;
usdhc_cfg[1].max_bus_width = 4;
for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
switch (index) {
case 0:

3
board/freescale/mx6qsabrelite/mx6qsabrelite.c
View File

@ -274,6 +274,9 @@ int board_mmc_init(bd_t *bis)
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
usdhc_cfg[0].max_bus_width = 4;
usdhc_cfg[1].max_bus_width = 4;
for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
switch (index) {
case 0:

2
board/wandboard/wandboard.c
View File

@ -105,6 +105,8 @@ int board_mmc_init(bd_t *bis)
imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
usdhc_cfg[0].max_bus_width = 4;
return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
}

7
drivers/mmc/fsl_esdhc.c
View File

@ -580,6 +580,13 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT | MMC_MODE_HC;
if (cfg->max_bus_width > 0) {
if (cfg->max_bus_width < 8)
mmc->host_caps &= ~MMC_MODE_8BIT;
if (cfg->max_bus_width < 4)
mmc->host_caps &= ~MMC_MODE_4BIT;
}
if (caps & ESDHC_HOSTCAPBLT_HSS)
mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;

1
include/fsl_esdhc.h
View File

@ -168,6 +168,7 @@
struct fsl_esdhc_cfg {
u32 esdhc_base;
u32 sdhc_clk;
u8 max_bus_width;
};
/* Select the correct accessors depending on endianess */