ARM: kirkwood: add SBx81LIFXCAT board
This is a series of line cards for Allied Telesis's SBx8100 chassis switch. The CPU block is common to the SBx81GP24 and SBx81GT24 cards cards collectively referred to as SBx81LIFXCAT in u-boot. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Chris Packham
Stefan Roese
parent
14deee2081
commit
a6477f7cbc
145
arch/arm/dts/kirkwood-atl-sbx81lifxcat.dts
Normal file
145
arch/arm/dts/kirkwood-atl-sbx81lifxcat.dts
Normal file
@ -0,0 +1,145 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/dts-v1/;
|
||||
|
||||
#include "kirkwood.dtsi"
|
||||
#include "kirkwood-98dx4122.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Allied Telesis SBx81LIFXCAT Board";
|
||||
compatible = "atl,SBx8LIFXCAT", "marvell,kirkwood-98DX4122",
|
||||
"marvell,kirkwood";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x08000000>; /* 128 MB */
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
stdout-path = &uart0;
|
||||
};
|
||||
|
||||
aliases {
|
||||
ethernet0 = ð0;
|
||||
i2c0 = &i2c0;
|
||||
spi0 = &spi0;
|
||||
};
|
||||
|
||||
dsa {
|
||||
compatible = "marvell,dsa";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
dsa,ethernet = <ð0>;
|
||||
dsa,mii-bus = <&mdio>;
|
||||
status = "okay";
|
||||
|
||||
switch@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1 0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "internal0";
|
||||
};
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "internal1";
|
||||
};
|
||||
port@8 {
|
||||
reg = <8>;
|
||||
label = "internal8";
|
||||
phy-mode = "rgmii-id";
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
port@9 {
|
||||
reg = <9>;
|
||||
label = "internal9";
|
||||
phy-mode = "rgmii-id";
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
port@10 {
|
||||
reg = <10>;
|
||||
label = "cpu";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
ledn {
|
||||
label = "status:ledn";
|
||||
gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
ledp {
|
||||
label = "status:ledp";
|
||||
gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "st,m25p128", "jedec,spi-nor", "spi-flash";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
mode = <0>;
|
||||
|
||||
partition@u-boot {
|
||||
reg = <0x00000000 0x00c00000>;
|
||||
label = "u-boot";
|
||||
};
|
||||
partition@u-boot-env {
|
||||
reg = <0x00c00000 0x00040000>;
|
||||
label = "u-boot-env";
|
||||
};
|
||||
partition@unused {
|
||||
reg = <0x00100000 0x00f00000>;
|
||||
label = "unused";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
eeprom@52 {
|
||||
compatible = "atmel,24c04";
|
||||
reg = <0x52>;
|
||||
};
|
||||
|
||||
gpio3: gpio@76 {
|
||||
#gpio-cells = <2>;
|
||||
compatible = "nxp,pca9539";
|
||||
reg = <0x76>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
ethernet0-port@0 {
|
||||
speed = <1000>;
|
||||
duplex = <1>;
|
||||
};
|
||||
};
|
||||
@ -62,6 +62,9 @@ config TARGET_NSA310S
|
||||
config TARGET_SBx81LIFKW
|
||||
bool "Allied Telesis SBx81GS24/SBx81GT40/SBx81XS6/SBx81XS16"
|
||||
|
||||
config TARGET_SBx81LIFXCAT
|
||||
bool "Allied Telesis SBx81GP24/SBx81GT24"
|
||||
|
||||
endchoice
|
||||
|
||||
config SYS_SOC
|
||||
@ -85,5 +88,6 @@ source "board/Seagate/goflexhome/Kconfig"
|
||||
source "board/Seagate/nas220/Kconfig"
|
||||
source "board/zyxel/nsa310s/Kconfig"
|
||||
source "board/alliedtelesis/SBx81LIFKW/Kconfig"
|
||||
source "board/alliedtelesis/SBx81LIFXCAT/Kconfig"
|
||||
|
||||
endif
|
||||
|
||||
12
board/alliedtelesis/SBx81LIFXCAT/Kconfig
Normal file
12
board/alliedtelesis/SBx81LIFXCAT/Kconfig
Normal file
@ -0,0 +1,12 @@
|
||||
if TARGET_SBx81LIFXCAT
|
||||
|
||||
config SYS_BOARD
|
||||
default "SBx81LIFXCAT"
|
||||
|
||||
config SYS_VENDOR
|
||||
default "alliedtelesis"
|
||||
|
||||
config SYS_CONFIG_NAME
|
||||
default "SBx81LIFXCAT"
|
||||
|
||||
endif
|
||||
7
board/alliedtelesis/SBx81LIFXCAT/MAINTAINERS
Normal file
7
board/alliedtelesis/SBx81LIFXCAT/MAINTAINERS
Normal file
@ -0,0 +1,7 @@
|
||||
SBx81LIFXCAT BOARD
|
||||
M: Chris Packham <chris.packham@alliedtelesis.co.nz>
|
||||
S: Maintained
|
||||
F: board/alliedtelesis/SBx81LIFXCAT/
|
||||
F: include/configs/SBx81LIFXCAT
|
||||
F: configs/SBx81LIFXCAT_defconfig
|
||||
F: arch/arm/dts/kirkwood-atl-sbx81lifxcat.dts
|
||||
7
board/alliedtelesis/SBx81LIFXCAT/Makefile
Normal file
7
board/alliedtelesis/SBx81LIFXCAT/Makefile
Normal file
@ -0,0 +1,7 @@
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
# (C) Copyright 2010, 2018
|
||||
# Allied Telesis <www.alliedtelesis.com>
|
||||
#
|
||||
|
||||
obj-y += sbx81lifxcat.o
|
||||
49
board/alliedtelesis/SBx81LIFXCAT/kwbimage.cfg
Normal file
49
board/alliedtelesis/SBx81LIFXCAT/kwbimage.cfg
Normal file
@ -0,0 +1,49 @@
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
# (C) Copyright 2018 Allied Telesis
|
||||
#
|
||||
# Refer docs/README.kwimage for more details about how-to configure
|
||||
# and create kirkwood boot image
|
||||
#
|
||||
|
||||
# Boot Media configurations
|
||||
BOOT_FROM spi # Boot from SPI flash
|
||||
|
||||
# SOC registers configuration using bootrom header extension
|
||||
# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
|
||||
DATA 0xffd100e0 0x1b1b1b1b
|
||||
DATA 0xffd20134 0xffffffff
|
||||
DATA 0xffd20138 0x009fffff
|
||||
DATA 0xffd20154 0x00000000
|
||||
DATA 0xffd2014c 0x00000000
|
||||
DATA 0xffd20148 0x00000001
|
||||
|
||||
# Dram initalization for 1 x x16
|
||||
# DDR II Micron part number MT47H64M16HR-3
|
||||
# MClk 333MHz, Size 128MB, ECC disable
|
||||
#
|
||||
DATA 0xffd01400 0x43000618
|
||||
DATA 0xffd01404 0x38543000
|
||||
DATA 0xffd01408 0x23125441
|
||||
DATA 0xffd0140c 0x00000832
|
||||
DATA 0xffd01410 0x0000000D
|
||||
DATA 0xffd01414 0x00000000
|
||||
DATA 0xffd01418 0x00000000
|
||||
DATA 0xffd0141c 0x00000652
|
||||
DATA 0xffd01420 0x00000042
|
||||
DATA 0xffd01424 0x0000F0FF
|
||||
DATA 0xffd01428 0x00074410
|
||||
DATA 0xffd0147C 0x00007441
|
||||
DATA 0xffd01500 0x00000000 # SDRAM CS[0] Base address at 0x00000000
|
||||
DATA 0xffd01504 0x07FFFFF1 # SDRAM CS[0] Size 128MiB
|
||||
DATA 0xffd01508 0x10000000
|
||||
DATA 0xffd0150c 0x00FFFFF4 # SDRAM CS[1] Size, window disabled
|
||||
DATA 0xffd01514 0x00FFFFF8 # SDRAM CS[2] Size, window disabled
|
||||
DATA 0xffd0151c 0x00FFFFFC # SDRAM CS[3] Size, window disabled
|
||||
DATA 0xffd01494 0x84210000
|
||||
DATA 0xffd01498 0x00000000
|
||||
DATA 0xffd0149c 0x0000F80F
|
||||
DATA 0xffd01480 0x00000001
|
||||
|
||||
# End of Header extension
|
||||
DATA 0x0 0x0
|
||||
134
board/alliedtelesis/SBx81LIFXCAT/sbx81lifxcat.c
Normal file
134
board/alliedtelesis/SBx81LIFXCAT/sbx81lifxcat.c
Normal file
@ -0,0 +1,134 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* (C) Copyright 2010, 2018
|
||||
* Allied Telesis <www.alliedtelesis.com>
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <miiphy.h>
|
||||
#include <netdev.h>
|
||||
#include <led.h>
|
||||
#include <linux/io.h>
|
||||
#include <asm/arch/cpu.h>
|
||||
#include <asm/arch/soc.h>
|
||||
#include <asm/arch/mpp.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
|
||||
#define SBX81LIFXCAT_OE_LOW (~0)
|
||||
#define SBX81LIFXCAT_OE_HIGH (~BIT(11))
|
||||
#define SBX81LIFXCAT_OE_VAL_LOW (0)
|
||||
#define SBX81LIFXCAT_OE_VAL_HIGH (BIT(11))
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
/*
|
||||
* default gpio configuration
|
||||
* There are maximum 64 gpios controlled through 2 sets of registers
|
||||
* the below configuration configures mainly initial LED status
|
||||
*/
|
||||
mvebu_config_gpio(SBX81LIFXCAT_OE_VAL_LOW,
|
||||
SBX81LIFXCAT_OE_VAL_HIGH,
|
||||
SBX81LIFXCAT_OE_LOW, SBX81LIFXCAT_OE_HIGH);
|
||||
|
||||
/* Multi-Purpose Pins Functionality configuration */
|
||||
static const u32 kwmpp_config[] = {
|
||||
MPP0_SPI_SCn,
|
||||
MPP1_SPI_MOSI,
|
||||
MPP2_SPI_SCK,
|
||||
MPP3_SPI_MISO,
|
||||
MPP4_NF_IO6,
|
||||
MPP5_NF_IO7,
|
||||
MPP6_SYSRST_OUTn,
|
||||
MPP7_GPO,
|
||||
MPP8_TW_SDA,
|
||||
MPP9_TW_SCK,
|
||||
MPP10_UART0_TXD,
|
||||
MPP11_UART0_RXD,
|
||||
MPP12_GPO,
|
||||
MPP13_UART1_TXD,
|
||||
MPP14_UART1_RXD,
|
||||
MPP15_GPIO,
|
||||
MPP16_GPIO,
|
||||
MPP17_GPIO,
|
||||
MPP18_NF_IO0,
|
||||
MPP19_NF_IO1,
|
||||
MPP20_GE1_0,
|
||||
MPP21_GE1_1,
|
||||
MPP22_GE1_2,
|
||||
MPP23_GE1_3,
|
||||
MPP24_GE1_4,
|
||||
MPP25_GE1_5,
|
||||
MPP26_GE1_6,
|
||||
MPP27_GE1_7,
|
||||
MPP28_GE1_8,
|
||||
MPP29_GE1_9,
|
||||
MPP30_GE1_10,
|
||||
MPP31_GE1_11,
|
||||
MPP32_GE1_12,
|
||||
MPP33_GE1_13,
|
||||
MPP34_GPIO,
|
||||
MPP35_GPIO,
|
||||
MPP36_GPIO,
|
||||
MPP37_GPIO,
|
||||
MPP38_GPIO,
|
||||
MPP39_GPIO,
|
||||
MPP40_GPIO,
|
||||
MPP41_GPIO,
|
||||
MPP42_GPIO,
|
||||
MPP43_GPIO,
|
||||
MPP44_GPIO,
|
||||
MPP45_GPIO,
|
||||
MPP46_GPIO,
|
||||
MPP47_GPIO,
|
||||
MPP48_GPIO,
|
||||
MPP49_GPIO,
|
||||
0
|
||||
};
|
||||
|
||||
kirkwood_mpp_conf(kwmpp_config, NULL);
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
/* address of boot parameters */
|
||||
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_RESET_PHY_R
|
||||
/* automatically defined by kirkwood config.h */
|
||||
void reset_phy(void)
|
||||
{
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MV88E61XX_SWITCH
|
||||
int mv88e61xx_hw_reset(struct phy_device *phydev)
|
||||
{
|
||||
phydev->advertising = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full;
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MISC_INIT_R
|
||||
int misc_init_r(void)
|
||||
{
|
||||
struct udevice *dev;
|
||||
int ret;
|
||||
|
||||
ret = led_get_by_label("status:ledp", &dev);
|
||||
if (!ret)
|
||||
led_set_state(dev, LEDST_ON);
|
||||
|
||||
ret = led_get_by_label("status:ledn", &dev);
|
||||
if (!ret)
|
||||
led_set_state(dev, LEDST_OFF);
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
44
configs/SBx81LIFXCAT_defconfig
Normal file
44
configs/SBx81LIFXCAT_defconfig
Normal file
@ -0,0 +1,44 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_KIRKWOOD=y
|
||||
CONFIG_SYS_TEXT_BASE=0x00600000
|
||||
CONFIG_TARGET_SBx81LIFXCAT=y
|
||||
CONFIG_IDENT_STRING="\nSBx81LIFXCAT"
|
||||
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-atl-sbx81lifxcat"
|
||||
# CONFIG_SYS_MALLOC_F is not set
|
||||
CONFIG_BOOTDELAY=3
|
||||
CONFIG_SILENT_CONSOLE=y
|
||||
CONFIG_SILENT_U_BOOT_ONLY=y
|
||||
CONFIG_HUSH_PARSER=y
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_SF=y
|
||||
CONFIG_CMD_DHCP=y
|
||||
CONFIG_BOOTP_NTPSERVER=y
|
||||
CONFIG_CMD_MII=y
|
||||
CONFIG_CMD_PING=y
|
||||
CONFIG_CMD_SNTP=y
|
||||
# CONFIG_CMD_LED is not set
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_DM_PCA953X=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_SYS_I2C_MVTWSI=y
|
||||
CONFIG_I2C_MUX=y
|
||||
CONFIG_I2C_MUX_PCA954x=y
|
||||
CONFIG_LED=y
|
||||
CONFIG_LED_GPIO=y
|
||||
# CONFIG_MMC is not set
|
||||
CONFIG_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
||||
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_MV88E61XX_SWITCH=y
|
||||
CONFIG_MV88E61XX_CPU_PORT=10
|
||||
CONFIG_MV88E61XX_PHY_PORTS=0x003
|
||||
CONFIG_MV88E61XX_FIXED_PORTS=0x300
|
||||
CONFIG_MV88E61XX_RGMII_DELAY=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_KIRKWOOD_SPI=y
|
||||
114
include/configs/SBx81LIFXCAT.h
Normal file
114
include/configs/SBx81LIFXCAT.h
Normal file
@ -0,0 +1,114 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0+ */
|
||||
/*
|
||||
* (C) Copyright 2016 Allied Telesis <www.alliedtelesis.co.nz>
|
||||
*/
|
||||
|
||||
#ifndef _CONFIG_SBX81LIFXCAT_H
|
||||
#define _CONFIG_SBX81LIFXCAT_H
|
||||
|
||||
/*
|
||||
* High Level Configuration Options (easy to change)
|
||||
*/
|
||||
#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
|
||||
#define CONFIG_KW88F6281 1 /* SOC Name */
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
|
||||
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg
|
||||
#define CONFIG_BUILD_TARGET "u-boot.kwb"
|
||||
|
||||
/* additions for new ARM relocation support */
|
||||
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
||||
|
||||
#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */
|
||||
#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */
|
||||
#define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 */
|
||||
#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */
|
||||
#define CONFIG_KIRKWOOD_GPIO 1
|
||||
|
||||
#define CONFIG_MISC_INIT_R /* call misc_init_r */
|
||||
|
||||
/*
|
||||
* NS16550 Configuration
|
||||
*/
|
||||
#define CONFIG_SYS_NS16550
|
||||
#define CONFIG_SYS_NS16550_SERIAL
|
||||
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
||||
#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
|
||||
#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE
|
||||
|
||||
/*
|
||||
* Serial Port configuration
|
||||
* The following definitions let you select what serial you want to use
|
||||
* for your console driver.
|
||||
*/
|
||||
|
||||
#define CONFIG_CONS_INDEX 1 /*Console on UART0 */
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
||||
#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */
|
||||
#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */
|
||||
|
||||
#define MTDPARTS_DEFAULT "mtdparts=spi0.0:768K(boot)ro,256K(boot-env),14M(user),1M(errlog)"
|
||||
#define MTDPARTS_MTDOOPS "errlog"
|
||||
#define CONFIG_DOS_PARTITION
|
||||
|
||||
/*
|
||||
* Environment variables configurations
|
||||
*/
|
||||
#define CONFIG_ENV_SPI_BUS 0
|
||||
#define CONFIG_ENV_SPI_CS 0
|
||||
#define CONFIG_ENV_SPI_MAX_HZ 20000000 /* 20Mhz */
|
||||
#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
|
||||
#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K */
|
||||
#define CONFIG_ENV_SIZE 0x02000
|
||||
#define CONFIG_ENV_OFFSET 0xc0000 /* env starts here - 768K */
|
||||
|
||||
/*
|
||||
* U-Boot bootcode configuration
|
||||
*/
|
||||
|
||||
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for monitor */
|
||||
#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* Reserve 4.0 MB for malloc */
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/
|
||||
|
||||
/* size in bytes reserved for initial data */
|
||||
|
||||
#include <asm/arch/config.h>
|
||||
/* There is no PHY directly connected so don't ask it for link status */
|
||||
#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
|
||||
|
||||
/*
|
||||
* Other required minimal configurations
|
||||
*/
|
||||
#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
|
||||
#define CONFIG_NR_DRAM_BANKS 4
|
||||
#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */
|
||||
#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */
|
||||
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
|
||||
|
||||
/*
|
||||
* Ethernet Driver configuration
|
||||
*/
|
||||
#ifdef CONFIG_CMD_NET
|
||||
#define CONFIG_NETCONSOLE /* include NetConsole support */
|
||||
#define CONFIG_NET_MULTI /* specify more that one ports available */
|
||||
#define CONFIG_MII /* expose smi over miiphy interface */
|
||||
#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */
|
||||
#define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */
|
||||
#define CONFIG_PHY_BASE_ADR 0x01
|
||||
#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
|
||||
#endif /* CONFIG_CMD_NET */
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default location for tftp and bootm */
|
||||
|
||||
#endif /* _CONFIG_SBX81LIFXCAT_H */
|
||||
Loading…
Reference in New Issue
Block a user