leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

arm: mvebu: clearfog: use the microsom .dtsi

Browse Source 
Use hardware description from the recently introduced microsom .dtsi
file to reduce duplication.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Dennis Gilmore <dennis@ausil.us>
Tested-by: Dennis Gilmore <dennis@ausil.us>
Signed-off-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Baruch Siach 2018-06-14 18:17:52 +03:00 committed by Stefan Roese
parent bf3eaa3e5c
commit a4adb1f576
1 changed files with 6 additions and 57 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

63
arch/arm/dts/armada-388-clearfog.dts
View File

@ -50,6 +50,7 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include "armada-388.dtsi"
#include "armada-38x-solidrun-microsom.dtsi"
/ {
model = "SolidRun Clearfog A1";
@ -70,11 +71,6 @@
stdout-path = "serial0:115200n8";
};
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>; /* 256 MB */
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
@ -84,11 +80,6 @@
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
internal-regs {
ethernet@30000 {
mac-address = [00 50 43 02 02 02];
@ -108,15 +99,6 @@
status = "okay";
};
ethernet@70000 {
mac-address = [00 50 43 02 02 01];
pinctrl-0 = <&ge0_rgmii_pins>;
pinctrl-names = "default";
phy = <&phy_dedicated>;
phy-mode = "rgmii-id";
status = "okay";
};
i2c@11000 {
/* Is there anything on this? */
clock-frequency = <100000>;
@ -226,22 +208,6 @@
status = "okay";
};
mdio@72004 {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
phy_dedicated: ethernet-phy@0 {
/*
* Annoyingly, the marvell phy driver
* configures the LED register, rather
* than preserving reset-loaded setting.
* We undo that rubbish here.
*/
marvell,reg-init = <3 16 0 0x101e>;
reg = <0>;
};
};
pinctrl@18000 {
clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
marvell,pins = "mpp46";
@ -260,12 +226,6 @@
marvell,pins = "mpp20";
marvell,function = "gpio";
};
clearfog_sdhci_pins: clearfog-sdhci-pins {
marvell,pins = "mpp21", "mpp28",
"mpp37", "mpp38",
"mpp39", "mpp40";
marvell,function = "sd0";
};
clearfog_spi1_cs_pins: spi1-cs-pins {
marvell,pins = "mpp55";
marvell,function = "spi1";
@ -311,7 +271,7 @@
bus-width = <4>;
cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
no-1-8-v;
pinctrl-0 = <&clearfog_sdhci_pins
pinctrl-0 = <&microsom_sdhci_pins
&clearfog_sdhci_cd_pins>;
pinctrl-names = "default";
status = "okay";
@ -319,13 +279,6 @@
wp-inverted;
};
serial@12000 {
pinctrl-0 = <&uart0_pins>;
pinctrl-names = "default";
status = "okay";
u-boot,dm-pre-reloc;
};
serial@12100 {
/* mikrobus uart */
pinctrl-0 = <&mikro_uart_pins>;
@ -342,14 +295,6 @@
pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>;
pinctrl-names = "default";
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "w25q32", "jedec,spi-nor", "spi-flash";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <3000000>;
};
};
usb3@f8000 {
@ -457,6 +402,10 @@
};
};
&w25q32 {
status = "okay";
};
/*
+#define A38x_CUSTOMER_BOARD_1_MPP16_23 0x00400011
MPP18: gpio ? (pca9655 int?)