Use correct spelling of "U-Boot"
Correct spelling of "U-Boot" shall be used in all written text (documentation, comments in source files etc.). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
This commit is contained in:
Bin Meng
Anatolij Gustschin
parent
94985cc9d3
commit
a187559e3d
4
README
4
README
@ -460,7 +460,7 @@ The following options need to be configured:
|
||||
|
||||
CONFIG_SYS_CPC_REINIT_F
|
||||
This CONFIG is defined when the CPC is configured as SRAM at the
|
||||
time of U-boot entry and is required to be re-initialized.
|
||||
time of U-Boot entry and is required to be re-initialized.
|
||||
|
||||
CONFIG_DEEP_SLEEP
|
||||
Indicates this SoC supports deep sleep feature. If deep sleep is
|
||||
@ -2963,7 +2963,7 @@ CBFS (Coreboot Filesystem) support
|
||||
- Parallel Flash support:
|
||||
CONFIG_SYS_NO_FLASH
|
||||
|
||||
Traditionally U-boot was run on systems with parallel NOR
|
||||
Traditionally U-Boot was run on systems with parallel NOR
|
||||
flash. This option is used to disable support for parallel NOR
|
||||
flash. This option should be defined if the board does not have
|
||||
parallel flash.
|
||||
|
||||
@ -46,7 +46,7 @@ void reset_cpu(ulong addr)
|
||||
int arch_cpu_init(void)
|
||||
{
|
||||
/*
|
||||
* It might be necessary to flush data cache, if U-boot is loaded
|
||||
* It might be necessary to flush data cache, if U-Boot is loaded
|
||||
* from kickstart bootloader, e.g. from S1L loader
|
||||
*/
|
||||
flush_dcache_all();
|
||||
|
||||
@ -41,5 +41,5 @@ lowlevel_init:
|
||||
orr r0, #0x00000004
|
||||
str r0, [r1]
|
||||
|
||||
/* Return to U-boot via saved link register */
|
||||
/* Return to U-Boot via saved link register */
|
||||
mov pc, lr
|
||||
|
||||
@ -37,7 +37,7 @@ _monitor_vectors:
|
||||
|
||||
/*
|
||||
* secure monitor handler
|
||||
* U-boot calls this "software interrupt" in start.S
|
||||
* U-Boot calls this "software interrupt" in start.S
|
||||
* This is executed on a "smc" instruction, we use a "smc #0" to switch
|
||||
* to non-secure state.
|
||||
* r0, r1, r2: passed to the callee
|
||||
|
||||
@ -1,6 +1,6 @@
|
||||
if ARM64
|
||||
|
||||
config ARMV8_MULTIENTRY
|
||||
boolean "Enable multiple CPUs to enter into U-boot"
|
||||
boolean "Enable multiple CPUs to enter into U-Boot"
|
||||
|
||||
endif
|
||||
|
||||
@ -59,7 +59,7 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* for U-boot only */
|
||||
/* for U-Boot only */
|
||||
/ {
|
||||
soc {
|
||||
u-boot,dm-pre-reloc;
|
||||
|
||||
@ -61,7 +61,7 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* for U-boot only */
|
||||
/* for U-Boot only */
|
||||
/ {
|
||||
soc {
|
||||
u-boot,dm-pre-reloc;
|
||||
|
||||
@ -66,7 +66,7 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* for U-boot only */
|
||||
/* for U-Boot only */
|
||||
/ {
|
||||
soc {
|
||||
u-boot,dm-pre-reloc;
|
||||
|
||||
@ -47,7 +47,7 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* for U-boot only */
|
||||
/* for U-Boot only */
|
||||
/ {
|
||||
soc {
|
||||
u-boot,dm-pre-reloc;
|
||||
|
||||
@ -68,7 +68,7 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* for U-boot only */
|
||||
/* for U-Boot only */
|
||||
&serial0 {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
@ -63,7 +63,7 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* for U-boot only */
|
||||
/* for U-Boot only */
|
||||
/ {
|
||||
soc {
|
||||
u-boot,dm-pre-reloc;
|
||||
|
||||
@ -49,7 +49,7 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* for U-boot only */
|
||||
/* for U-Boot only */
|
||||
/ {
|
||||
soc {
|
||||
u-boot,dm-pre-reloc;
|
||||
|
||||
@ -45,7 +45,7 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* for U-boot only */
|
||||
/* for U-Boot only */
|
||||
/ {
|
||||
soc {
|
||||
u-boot,dm-pre-reloc;
|
||||
|
||||
@ -42,10 +42,10 @@ struct spl_machine_param {
|
||||
u32 mem_iv_size; /* Memory channel interleaving size */
|
||||
enum ddr_mode mem_type; /* Type of on-board memory */
|
||||
/*
|
||||
* U-boot size - The iROM mmc copy function used by the SPL takes a
|
||||
* block count paramter to describe the u-boot size unlike the spi
|
||||
* boot copy function which just uses the u-boot size directly. Align
|
||||
* the u-boot size to block size (512 bytes) when populating the SPL
|
||||
* U-Boot size - The iROM mmc copy function used by the SPL takes a
|
||||
* block count paramter to describe the U-Boot size unlike the spi
|
||||
* boot copy function which just uses the U-Boot size directly. Align
|
||||
* the U-Boot size to block size (512 bytes) when populating the SPL
|
||||
* table only for mmc boot.
|
||||
*/
|
||||
u32 uboot_size;
|
||||
|
||||
@ -30,10 +30,10 @@ relocate_wait_code:
|
||||
* because that comes out to be the last 4KB of the iRAM
|
||||
* (Base Address - 0x02020000, Limit Address - 0x020740000).
|
||||
*
|
||||
* U-boot and kernel are aware of this code and flags by the simple
|
||||
* U-Boot and kernel are aware of this code and flags by the simple
|
||||
* fact that we are implementing a workaround in the last 4KB
|
||||
* of the iRAM and we have already defined these flag and address
|
||||
* values in both kernel and U-boot for our use.
|
||||
* values in both kernel and U-Boot for our use.
|
||||
*/
|
||||
code_base:
|
||||
b 1f
|
||||
|
||||
@ -177,7 +177,7 @@ static void exynos_spi_copy(unsigned int uboot_size, unsigned int uboot_addr)
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Copy U-boot from mmc to RAM:
|
||||
* Copy U-Boot from mmc to RAM:
|
||||
* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains
|
||||
* Pointer to API (Data transfer from mmc to ram)
|
||||
*/
|
||||
|
||||
@ -283,5 +283,5 @@ lowlevel_init:
|
||||
|
||||
#endif /* CONFIG_SPL_BUILD */
|
||||
|
||||
/* Return to U-boot via saved link register */
|
||||
/* Return to U-Boot via saved link register */
|
||||
mov pc, lr
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#
|
||||
# U-boot - Makefile
|
||||
# U-Boot - Makefile
|
||||
#
|
||||
# Copyright (c) 2005-2008 Analog Device Inc.
|
||||
#
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - cpu.c CPU specific functions
|
||||
* U-Boot - cpu.c CPU specific functions
|
||||
*
|
||||
* Copyright (c) 2005-2008 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - cpu.h
|
||||
* U-Boot - cpu.h
|
||||
*
|
||||
* Copyright (c) 2005-2007 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - interrupts.c Interrupt related routines
|
||||
* U-Boot - interrupts.c Interrupt related routines
|
||||
*
|
||||
* Copyright (c) 2005-2008 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - start.S Startup file for Blackfin u-boot
|
||||
* U-Boot - start.S Startup file for Blackfin U-Boot
|
||||
*
|
||||
* Copyright (c) 2005-2008 Analog Devices Inc.
|
||||
*
|
||||
@ -51,7 +51,7 @@ ENTRY(_start)
|
||||
#ifdef CONFIG_HW_WATCHDOG
|
||||
/* Program the watchdog with default timeout of ~5 seconds.
|
||||
* That should be long enough to bootstrap ourselves up and
|
||||
* then the common u-boot code can take over.
|
||||
* then the common U-Boot code can take over.
|
||||
*/
|
||||
r1 = WDDIS;
|
||||
# ifdef __ADSPBF60x__
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - traps.c Routines related to interrupts and exceptions
|
||||
* U-Boot - traps.c Routines related to interrupts and exceptions
|
||||
*
|
||||
* Copyright (c) 2005-2008 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - u-boot.lds.S
|
||||
* U-Boot - u-boot.lds.S
|
||||
*
|
||||
* Copyright (c) 2005-2010 Analog Device Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - bitops.h Routines for bit operations
|
||||
* U-Boot - bitops.h Routines for bit operations
|
||||
*
|
||||
* Copyright (c) 2005-2007 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - blackfin_local.h
|
||||
* U-Boot - blackfin_local.h
|
||||
*
|
||||
* Copyright (c) 2005-2007 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - byteorder.h
|
||||
* U-Boot - byteorder.h
|
||||
*
|
||||
* Copyright (c) 2005-2007 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - deferred register layout
|
||||
* U-Boot - deferred register layout
|
||||
*
|
||||
* Copyright 2004-2009 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - delay.h Routines for introducing delays
|
||||
* U-Boot - delay.h Routines for introducing delays
|
||||
*
|
||||
* Copyright (c) 2005-2007 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - global_data.h Declarations for global data of u-boot
|
||||
* U-Boot - global_data.h Declarations for global data of U-Boot
|
||||
*
|
||||
* Copyright (c) 2005-2007 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - io.h IO routines
|
||||
* U-Boot - io.h IO routines
|
||||
*
|
||||
* Copyright 2004-2009 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - linkage.h
|
||||
* U-Boot - linkage.h
|
||||
*
|
||||
* Copyright (c) 2005-2007 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - posix_types.h
|
||||
* U-Boot - posix_types.h
|
||||
*
|
||||
* Copyright (c) 2005-2007 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - processor.h
|
||||
* U-Boot - processor.h
|
||||
*
|
||||
* Copyright (c) 2005-2007 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - setup.h
|
||||
* U-Boot - setup.h
|
||||
*
|
||||
* Copyright (c) 2005-2007 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - main board file
|
||||
* U-Boot - main board file
|
||||
*
|
||||
* Copyright (c) 2008-2012 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - string.h String functions
|
||||
* U-Boot - string.h String functions
|
||||
*
|
||||
* Copyright (c) 2005-2007 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - system.h
|
||||
* U-Boot - system.h
|
||||
*
|
||||
* Copyright (c) 2005-2007 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - types.h
|
||||
* U-Boot - types.h
|
||||
*
|
||||
* Copyright (c) 2005-2007 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - u-boot.h Structure declarations for board specific data
|
||||
* U-Boot - u-boot.h Structure declarations for board specific data
|
||||
*
|
||||
* Copyright (c) 2005-2007 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#
|
||||
# U-boot Makefile
|
||||
# U-Boot Makefile
|
||||
#
|
||||
# Copyright (c) 2005-2008 Analog Devices Inc.
|
||||
#
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - boot.c - misc boot helper functions
|
||||
* U-Boot - boot.c - misc boot helper functions
|
||||
*
|
||||
* Copyright (c) 2005-2008 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - cache.c
|
||||
* U-Boot - cache.c
|
||||
*
|
||||
* Copyright (c) 2005-2008 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - cmd_cache_dump.c
|
||||
* U-Boot - cmd_cache_dump.c
|
||||
*
|
||||
* Copyright (c) 2007-2008 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - architecture specific kgdb code
|
||||
* U-Boot - architecture specific kgdb code
|
||||
*
|
||||
* Copyright 2009 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - muldi3.c contains routines for mult and div
|
||||
* U-Boot - muldi3.c contains routines for mult and div
|
||||
*
|
||||
* Copyright (c) 2005-2007 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - section.c
|
||||
* U-Boot - section.c
|
||||
*
|
||||
* Copyright (c) 2014 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - string.c Contains library routines.
|
||||
* U-Boot - string.c Contains library routines.
|
||||
*
|
||||
* Copyright (c) 2005-2008 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - muldi3.c contains routines for mult and div
|
||||
* U-Boot - muldi3.c contains routines for mult and div
|
||||
*
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
|
||||
@ -57,7 +57,7 @@
|
||||
.set noreorder
|
||||
|
||||
ENTRY(_start)
|
||||
/* U-boot entry point */
|
||||
/* U-Boot entry point */
|
||||
b reset
|
||||
nop
|
||||
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - linkage.h
|
||||
* U-Boot - linkage.h
|
||||
*
|
||||
* Copyright (c) 2005-2007 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -12,7 +12,7 @@
|
||||
|
||||
/*
|
||||
* Note: For P5040, the fourth SerDes bank (with two lanes) is on SerDes2, but
|
||||
* U-boot only supports one SerDes controller. Therefore, we ignore bank 4 in
|
||||
* U-Boot only supports one SerDes controller. Therefore, we ignore bank 4 in
|
||||
* this table. This works because most of the SerDes code is for errata
|
||||
* work-arounds, and there are no P5040 errata that effect bank 4.
|
||||
*/
|
||||
|
||||
@ -13,7 +13,7 @@
|
||||
|
||||
/* Currently, this board information is not passed to
|
||||
* Linux kernel from U-Boot, but may be passed to other
|
||||
* Operating systems. This is because U-boot emulates
|
||||
* Operating systems. This is because U-Boot emulates
|
||||
* a SUN PROM loader (from Linux point of view).
|
||||
*/
|
||||
#include <asm-generic/u-boot.h>
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* Added to U-boot,
|
||||
* Added to U-Boot,
|
||||
* Daniel Hellstrom, Gaisler Research, daniel@gaisler.com
|
||||
* Copyright (C) 2007
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - x86 Startup Code
|
||||
* U-Boot - x86 Startup Code
|
||||
*
|
||||
* (C) Copyright 2002
|
||||
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
|
||||
|
||||
@ -162,7 +162,7 @@ int boot_linux_kernel(ulong setup_base, ulong load_address, bool image_64bit)
|
||||
* boot_params structure, and then jump to the kernel. We
|
||||
* assume that %cs is 0x10, 4GB flat, and read/execute, and
|
||||
* the data segments are 0x18, 4GB flat, and read/write.
|
||||
* U-boot is setting them up that way for itself in
|
||||
* U-Boot is setting them up that way for itself in
|
||||
* arch/i386/cpu/cpu.c.
|
||||
*
|
||||
* Note that we cannot currently boot a kernel while running as
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#
|
||||
# U-boot - Makefile
|
||||
# U-Boot - Makefile
|
||||
#
|
||||
# Copyright (c) 2005-2008 Analog Device Inc.
|
||||
#
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - main board file for BCT brettl2
|
||||
* U-Boot - main board file for BCT brettl2
|
||||
*
|
||||
* Copyright (c) 2010 BCT Electronic GmbH
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#
|
||||
# U-boot - Makefile
|
||||
# U-Boot - Makefile
|
||||
#
|
||||
# Copyright (c) 2005-2008 Analog Device Inc.
|
||||
#
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - main board file
|
||||
* U-Boot - main board file
|
||||
*
|
||||
* Copyright (c) 2008-2010 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#
|
||||
# U-boot - Makefile
|
||||
# U-Boot - Makefile
|
||||
#
|
||||
# Copyright (c) 2005-2008 Analog Device Inc.
|
||||
#
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - main board file
|
||||
* U-Boot - main board file
|
||||
*
|
||||
* Copyright (c) 2008-2009 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#
|
||||
# U-boot - Makefile
|
||||
# U-Boot - Makefile
|
||||
#
|
||||
# Copyright (c) 2005-2008 Analog Device Inc.
|
||||
#
|
||||
|
||||
@ -1,4 +1,4 @@
|
||||
/* U-boot - bf525-ucr2.c board specific routines
|
||||
/* U-Boot - bf525-ucr2.c board specific routines
|
||||
*
|
||||
* (C) Copyright 2000-2004
|
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#
|
||||
# U-boot - Makefile
|
||||
# U-Boot - Makefile
|
||||
#
|
||||
# Copyright (c) 2005-2008 Analog Device Inc.
|
||||
#
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - main board file
|
||||
* U-Boot - main board file
|
||||
*
|
||||
* Copyright (c) 2005-2009 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#
|
||||
# U-boot - Makefile
|
||||
# U-Boot - Makefile
|
||||
#
|
||||
# Copyright (c) 2005-2008 Analog Device Inc.
|
||||
#
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - main board file
|
||||
* U-Boot - main board file
|
||||
*
|
||||
* Copyright (c) 2010 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#
|
||||
# U-boot - Makefile
|
||||
# U-Boot - Makefile
|
||||
#
|
||||
# Copyright (c) 2005-2008 Analog Device Inc.
|
||||
#
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - main board file
|
||||
* U-Boot - main board file
|
||||
*
|
||||
* Copyright (c) 2005-2009 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#
|
||||
# U-boot - Makefile
|
||||
# U-Boot - Makefile
|
||||
#
|
||||
# Copyright (c) 2005-2008 Analog Device Inc.
|
||||
#
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - main board file
|
||||
* U-Boot - main board file
|
||||
*
|
||||
* Copyright (c) 2010 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#
|
||||
# U-boot - Makefile
|
||||
# U-Boot - Makefile
|
||||
#
|
||||
# Copyright (c) 2005-2007 Analog Device Inc.
|
||||
#
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - main board file
|
||||
* U-Boot - main board file
|
||||
*
|
||||
* Copyright (c) 2005-2008 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - flash-defines.h
|
||||
* U-Boot - flash-defines.h
|
||||
*
|
||||
* Copyright (c) 2005-2007 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - flash.c Flash driver for PSD4256GV
|
||||
* U-Boot - flash.c Flash driver for PSD4256GV
|
||||
*
|
||||
* Copyright (c) 2005-2007 Analog Devices Inc.
|
||||
* This file is based on BF533EzFlash.c originally written by Analog Devices, Inc.
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - psd4256.h
|
||||
* U-Boot - psd4256.h
|
||||
*
|
||||
* Copyright (c) 2005-2007 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#
|
||||
# U-boot - Makefile
|
||||
# U-Boot - Makefile
|
||||
#
|
||||
# Copyright (c) 2005-2008 Analog Device Inc.
|
||||
#
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - main board file
|
||||
* U-Boot - main board file
|
||||
*
|
||||
* Copyright (c) 2005-2008 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#
|
||||
# U-boot - Makefile
|
||||
# U-Boot - Makefile
|
||||
#
|
||||
# Copyright (c) 2005-2008 Analog Device Inc.
|
||||
#
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - main board file
|
||||
* U-Boot - main board file
|
||||
*
|
||||
* Copyright (c) 2005-2009 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#
|
||||
# U-boot - Makefile
|
||||
# U-Boot - Makefile
|
||||
#
|
||||
# Copyright (c) 2005-2008 Analog Device Inc.
|
||||
#
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - main board file
|
||||
* U-Boot - main board file
|
||||
*
|
||||
* Copyright (c) 2005-2009 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#
|
||||
# U-boot - Makefile
|
||||
# U-Boot - Makefile
|
||||
#
|
||||
# Copyright (c) 2005-2008 Analog Device Inc.
|
||||
#
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - main board file
|
||||
* U-Boot - main board file
|
||||
*
|
||||
* Copyright (c) 2005-2009 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#
|
||||
# U-boot - Makefile
|
||||
# U-Boot - Makefile
|
||||
#
|
||||
# Copyright (c) 2005-2007 Analog Device Inc.
|
||||
#
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - main board file
|
||||
* U-Boot - main board file
|
||||
*
|
||||
* Copyright (c) 2005-2008 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#
|
||||
# U-boot - Makefile
|
||||
# U-Boot - Makefile
|
||||
#
|
||||
# Copyright (c) 2005-2008 Analog Device Inc.
|
||||
#
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - main board file
|
||||
* U-Boot - main board file
|
||||
*
|
||||
* Copyright (c) 2008 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#
|
||||
# U-boot - Makefile
|
||||
# U-Boot - Makefile
|
||||
#
|
||||
# Copyright (c) 2005-2008 Analog Device Inc.
|
||||
#
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - main board file
|
||||
* U-Boot - main board file
|
||||
*
|
||||
* Copyright (c) 2005-2008 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#
|
||||
# U-boot - Makefile
|
||||
# U-Boot - Makefile
|
||||
#
|
||||
# Copyright (c) 2005-2007 Analog Device Inc.
|
||||
#
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#
|
||||
# U-boot - Makefile
|
||||
# U-Boot - Makefile
|
||||
#
|
||||
# Copyright (c) 2005-2007 Analog Device Inc.
|
||||
#
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - main board file
|
||||
* U-Boot - main board file
|
||||
*
|
||||
* Copyright (c) 2005-2008 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#
|
||||
# U-boot - Makefile
|
||||
# U-Boot - Makefile
|
||||
#
|
||||
# Copyright (c) 2005-2008 Analog Device Inc.
|
||||
#
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - main board file
|
||||
* U-Boot - main board file
|
||||
*
|
||||
* Copyright (c) 2008-2011 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - main board file
|
||||
* U-Boot - main board file
|
||||
*
|
||||
* Copyright (c) 2008-2011 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - main board file
|
||||
* U-Boot - main board file
|
||||
*
|
||||
* Copyright (c) 2008-2011 Analog Devices Inc.
|
||||
*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#
|
||||
# U-boot - Makefile
|
||||
# U-Boot - Makefile
|
||||
#
|
||||
# Copyright (c) 2005-2008 Analog Device Inc.
|
||||
#
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* U-boot - blackstamp.c BlackStamp board specific routines
|
||||
* U-Boot - blackstamp.c BlackStamp board specific routines
|
||||
* Most code stolen from boards/bf533-stamp/bf533-stamp.c
|
||||
* Edited to the BlackStamp by Ben Matthews for UR LLE
|
||||
*
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue
Block a user