leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS

Browse Source 
This patch also adds an improved I2C set_speed(), which handles all clock
frequencies.

Signed-off-by: Timur Tabi <timur@freescale.com>
This commit is contained in:
Timur Tabi 2006-10-31 21:23:16 -06:00 committed by Kim Phillips
parent ac4b5622ce
commit 9ca880a250
9 changed files with 152 additions and 107 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
board/mpc8349emds/pci.c
View File

@ -75,10 +75,8 @@ pib_init(void)
/* Switch temporarily to I2C bus #2 */
orig_i2c_bus = i2c_get_bus_num();
if(orig_i2c_bus != I2C_BUS_2)
i2c_set_bus_num(I2C_BUS_2);
i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
if(orig_i2c_bus != 2)
i2c_set_bus_num(2);
val8 = 0;
i2c_write(0x23, 0x6, 1, &val8, 1);
@ -124,7 +122,7 @@ pib_init(void)
printf("PCI2: 32-bit on PMC3\n");
#endif
/* Reset to original I2C bus */
if(orig_i2c_bus != I2C_BUS_2)
if(orig_i2c_bus != 2)
i2c_set_bus_num(orig_i2c_bus);
}

6
board/mpc8349itx/mpc8349itx.c
View File

@ -259,7 +259,7 @@ int checkboard(void)
puts("Board: Freescale MPC8349E-mITX");
#ifdef CONFIG_HARD_I2C
i2c_set_bus_num(I2C_BUS_2);
i2c_set_bus_num(2);
if (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) ==
0)
printf(" %u.%u (PCF8475A)", (i2c_data & 0x02) >> 1,
@ -379,7 +379,7 @@ int misc_init_r(void)
u8 data[sizeof(eeprom_data)];
i2c_set_bus_num(I2C_BUS_1);
i2c_set_bus_num(1);
if (i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) {
if (memcmp(data, eeprom_data, sizeof(data)) != 0) {
@ -397,7 +397,7 @@ int misc_init_r(void)
#endif
#ifdef CFG_I2C_RTC_ADDR
i2c_set_bus_num(I2C_BUS_2);
i2c_set_bus_num(2);
if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data))
== 0) {

2
board/mpc8349itx/pci.c
View File

@ -105,7 +105,7 @@ void pci_init_board(void)
udelay(2000);
#ifdef CONFIG_HARD_I2C
i2c_set_bus_num(I2C_BUS_2);
i2c_set_bus_num(2);
/* Read the PCI_M66EN jumper setting */
if ((i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &reg8, sizeof(reg8)) == 0) ||
(i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &reg8, sizeof(reg8)) == 0)) {

11
board/mpc8360emds/pci.c
View File

@ -198,8 +198,11 @@ void pci_init_board(void)
* Assign PIB PMC slot to desired PCI bus
*/
mpc83xx_i2c = (i2c_t *) (CFG_IMMRBAR + CFG_I2C2_OFFSET);
i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
/* Switch temporarily to I2C bus #2 */
orig_i2c_bus = i2c_get_bus_num();
if(orig_i2c_bus != 2)
i2c_set_bus_num(2);
val8 = 0;
i2c_write(0x23, 0x6, 1, &val8, 1);
@ -227,6 +230,10 @@ void pci_init_board(void)
i2c_write(0x27, 0x3, 1, &val8, 1);
asm("eieio");
/* Reset to original I2C bus */
if(orig_i2c_bus != 2)
i2c_set_bus_num(orig_i2c_bus);
/*
* Release PCI RST Output signal
*/

210
cpu/mpc83xx/i2c.c
View File

@ -47,75 +47,121 @@
DECLARE_GLOBAL_DATA_PTR;
/* Three I2C bus speeds are supported here (50kHz, 100kHz
* and 400kHz). It should be easy to add more. Note that
* the maximum bus speed for I2C bus 1 is CSB/3, while I2C
* bus 2 can go as high as CSB.
* Typical values for CSB are 266MHz and 200MHz. */
/* 50kH 100kHz 400kHz */
static const uchar speed_map_266[][3] =
{{0x2e, 0x2a, 0x20}, /* base 88MHz */
{0x34, 0x30, 0x28}}; /* base 266 MHz */
static const uchar speed_map_200[][3] =
{{0x2c, 0x28, 0x20}, /* base 66 MHz */
{0x33, 0x2f, 0x26}}; /* base 200 MHz */
/* Initialize the bus pointer to whatever one the SPD EEPROM is on.
* Default is bus 1. This is necessary because the DDR initialization
* runs from ROM, and we can't switch buses because we can't modify
* the i2c_dev variable. Everything gets straightened out once i2c_init
* is called from RAM. */
#if defined CFG_SPD_BUS_NUM
static i2c_t *i2c_dev = CFG_SPD_BUS_NUM;
#else
static i2c_t *i2c_dev = I2C_1;
#ifndef CFG_SPD_BUS_NUM
#define CFG_SPD_BUS_NUM 1
#endif
static uchar busNum = I2C_BUS_1 ;
static int bus_speed[2] = {0, 0};
static unsigned int i2c_bus_num = CFG_SPD_BUS_NUM;
static int set_speed(int speed)
#if CFG_SPD_BUS_NUM == 1
static volatile i2c_t *i2c_dev = I2C_1;
#else
static volatile i2c_t *i2c_dev = I2C_2;
#endif
static int i2c_bus_speed[2] = {0, 0};
/*
* Map the frequency divider to the FDR. This data is taken from table 17-5
* of the MPC8349EA reference manual, with duplicates removed.
*/
static struct {
unsigned int divider;
u8 fdr;
} i2c_speed_map[] =
{
uchar value;
const uchar *spdPtr;
{0, 0x20},
{256, 0x20},
{288, 0x21},
{320, 0x22},
{352, 0x23},
{384, 0x24},
{416, 0x01},
{448, 0x25},
{480, 0x02},
{512, 0x26},
{576, 0x27},
{640, 0x28},
{704, 0x05},
{768, 0x29},
{832, 0x06},
{896, 0x2A},
{1024, 0x2B},
{1152, 0x08},
{1280, 0x2C},
{1536, 0x2D},
{1792, 0x2E},
{1920, 0x0B},
{2048, 0x2F},
{2304, 0x0C},
{2560, 0x30},
{3072, 0x31},
{3584, 0x32},
{3840, 0x0F},
{4096, 0x33},
{4608, 0x10},
{5120, 0x34},
{6144, 0x35},
{7168, 0x36},
{7680, 0x13},
{8192, 0x37},
{9216, 0x14},
{10240, 0x38},
{12288, 0x39},
{14336, 0x3A},
{15360, 0x17},
{16384, 0x3B},
{18432, 0x18},
{20480, 0x3C},
{24576, 0x3D},
{28672, 0x3E},
{30720, 0x1B},
{32768, 0x3F},
{36864, 0x1C},
{40960, 0x1D},
{49152, 0x1E},
{61440, 0x1F},
{-1, 0x1F}
};
/* Global data contains maximum I2C bus 1 speed, which is CSB/3 */
if(gd->i2c_clk == 88000000)
{
spdPtr = speed_map_266[busNum];
}
else if(gd->i2c_clk == 66000000)
{
spdPtr = speed_map_200[busNum];
}
else
{
printf("Max I2C bus speed %d not supported\n", gd->i2c_clk);
return -1;
}
#define NUM_I2C_SPEEDS (sizeof(i2c_speed_map) / sizeof(i2c_speed_map[0]))
switch(speed)
{
case 50000:
value = *(spdPtr + 0);
break;
case 100000:
value = *(spdPtr + 1);
break;
case 400000:
value = *(spdPtr + 2);
break;
default:
printf("I2C bus speed %d not supported\n", speed);
return -2;
}
/* set clock */
writeb(value, &i2c_dev->fdr);
bus_speed[busNum] = speed;
return 0;
static int set_speed(unsigned int speed)
{
unsigned long i2c_clk;
unsigned int divider, i;
u8 fdr = 0x3F;
i2c_clk = (i2c_bus_num == 2) ? gd->i2c2_clk : gd->i2c1_clk;
divider = i2c_clk / speed;
/* Scan i2c_speed_map[] for the closest matching divider.*/
for (i = 0; i < NUM_I2C_SPEEDS-1; i++) {
/* Locate our divider in between two entries in i2c_speed_map[] */
if ((divider >= i2c_speed_map[i].divider) &&
(divider <= i2c_speed_map[i+1].divider)) {
/* Which one is closer? */
if ((divider - i2c_speed_map[i].divider) < (i2c_speed_map[i+1].divider - divider)) {
fdr = i2c_speed_map[i].fdr;
} else {
fdr = i2c_speed_map[i+1].fdr;
}
break;
}
}
writeb(fdr, &i2c_dev->fdr);
i2c_bus_speed[i2c_bus_num - 1] = speed;
return 0;
}
@ -125,16 +171,16 @@ static void _i2c_init(int speed, int slaveadd)
writeb(0x00 , &i2c_dev->cr);
/* set clock */
writeb(speed, &i2c_dev->fdr);
set_speed(speed);
/* set default filter */
writeb(0x10,&i2c_dev->dfsrr);
writeb(IC2_FDR,&i2c_dev->dfsrr);
/* write slave address */
writeb(slaveadd, &i2c_dev->adr);
/* clear status register */
writeb(0x00, &i2c_dev->sr);
writeb(I2C_CR_MTX, &i2c_dev->sr);
/* start I2C controller */
writeb(I2C_CR_MEN, &i2c_dev->cr);
@ -142,19 +188,19 @@ static void _i2c_init(int speed, int slaveadd)
void i2c_init(int speed, int slaveadd)
{
/* Set both interfaces to the same speed and slave address */
/* Note: This function gets called twice - before and after
* relocation to RAM. The first time it's called, we are unable
* to change buses, so whichever one 'i2c_dev' was initialized to
* gets set twice. When run from RAM both buses get set properly */
/* Set both interfaces to the same speed and slave address */
/* Note: This function gets called twice - before and after
* relocation to RAM. The first time it's called, we are unable
* to change buses, so whichever one 'i2c_dev' was initialized to
* gets set twice. When run from RAM both buses get set properly */
i2c_set_bus_num(I2C_BUS_1);
_i2c_init(speed, slaveadd);
#ifdef CFG_I2C2_OFFSET
i2c_set_bus_num(I2C_BUS_2);
_i2c_init(speed, slaveadd);
i2c_set_bus_num(I2C_BUS_1);
#endif /* CFG_I2C2_OFFSET */
i2c_set_bus_num(1);
_i2c_init(speed, slaveadd);
#ifdef CFG_I2C2_OFFSET
i2c_set_bus_num(2);
_i2c_init(speed, slaveadd);
i2c_set_bus_num(1);
#endif /* CFG_I2C2_OFFSET */
}
static __inline__ int
@ -340,38 +386,38 @@ void i2c_reg_write (uchar i2c_addr, uchar reg, uchar val)
i2c_write (i2c_addr, reg, 1, &val, 1);
}
int i2c_set_bus_num(uchar bus)
int i2c_set_bus_num(unsigned int bus)
{
if(bus == I2C_BUS_1)
if(bus == 1)
{
i2c_dev = I2C_1;
}
#ifdef CFG_I2C2_OFFSET
else if(bus == I2C_BUS_2)
else if(bus == 2)
{
i2c_dev = I2C_2;
}
#endif /* CFG_I2C2_OFFSET */
#endif
else
{
return -1;
}
busNum = bus;
i2c_bus_num = bus;
return 0;
}
int i2c_set_bus_speed(int speed)
int i2c_set_bus_speed(unsigned int speed)
{
return set_speed(speed);
}
uchar i2c_get_bus_num(void)
unsigned int i2c_get_bus_num(void)
{
return busNum;
return i2c_bus_num;
}
int i2c_get_bus_speed(void)
unsigned int i2c_get_bus_speed(void)
{
return bus_speed[busNum];
return i2c_bus_speed[i2c_bus_num - 1];
}
#endif /* CONFIG_HARD_I2C */

10
include/asm-ppc/i2c.h
View File

@ -79,12 +79,6 @@ typedef struct i2c
#endif
#define I2C_TIMEOUT (CFG_HZ/4)
enum I2C_BUS_NUM
{
I2C_BUS_1 = 0,
I2C_BUS_2,
};
#ifndef CFG_IMMRBAR
#error CFG_IMMRBAR is not defined in /include/configs/${BOARD}.h
#endif
@ -96,9 +90,9 @@ enum I2C_BUS_NUM
#define I2C_1 ((i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET))
/* Optional support for second I2C bus */
#ifdef CFG_I2C2_OFFSET
#ifdef CFG_I2C2_OFFSET
#define I2C_2 ((i2c_t*)(CFG_IMMRBAR + CFG_I2C2_OFFSET))
#endif /* CFG_I2C2_OFFSET */
#endif /* CFG_I2C2_OFFSET */
#define I2C_READ 1
#define I2C_WRITE 0

2
include/configs/MPC8349ITX.h
View File

@ -81,7 +81,7 @@
#define CONFIG_I2C_CMD_TREE
#define CFG_I2C_OFFSET 0x3000
#define CFG_I2C2_OFFSET 0x3100
#define CFG_SPD_BUS_NUM I2C_2
#define CFG_SPD_BUS_NUM 2
#define CFG_I2C_8574_ADDR1 0x20 /* I2C2, PCF8574 */
#define CFG_I2C_8574_ADDR2 0x21 /* I2C2, PCF8574 */

2
include/configs/TQM834x.h
View File

@ -36,8 +36,8 @@
*/
#define CONFIG_E300 1 /* E300 Family */
#define CONFIG_MPC83XX 1 /* MPC83XX family */
#define CONFIG_MPC8349 1 /* MPC8349 specific */
#define CONFIG_MPC834X 1 /* MPC834X specific */
#define CONFIG_MPC8349 1 /* MPC8349 specific */
#define CONFIG_TQM834X 1 /* TQM834X board specific */
/* IMMR Base Addres Register, use Freescale default: 0xff400000 */

8
include/i2c.h
View File

@ -97,7 +97,7 @@ void i2c_reg_write(uchar chip, uchar reg, uchar val);
* Returns: 0 on success, not 0 on failure
*
*/
int i2c_set_bus_num(uchar bus);
int i2c_set_bus_num(unsigned int bus);
/*
* i2c_get_bus_num:
@ -105,7 +105,7 @@ int i2c_set_bus_num(uchar bus);
* Returns index of currently active I2C bus. Zero-based.
*/
uchar i2c_get_bus_num(void);
unsigned int i2c_get_bus_num(void);
/*
* i2c_set_bus_speed:
@ -117,7 +117,7 @@ uchar i2c_get_bus_num(void);
* Returns: 0 on success, not 0 on failure
*
*/
int i2c_set_bus_speed(int);
int i2c_set_bus_speed(unsigned int);
/*
* i2c_get_bus_speed:
@ -125,6 +125,6 @@ int i2c_set_bus_speed(int);
* Returns speed of currently active I2C bus in Hz
*/
int i2c_get_bus_speed(void);
unsigned int i2c_get_bus_speed(void);
#endif /* _I2C_H_ */