ARM: hikey: Update README with various corrections
The README had a few mistakes, and one of the URL's had changed. Also update the boot log with the latest boot trace from ATF, which now includes the mcuimage.bin. Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
This commit is contained in:
Peter Griffin
Tom Rini
parent
596380db28
commit
9c71a21dff
@ -25,8 +25,12 @@ Currently the u-boot port supports: -
|
||||
Compile u-boot
|
||||
==============
|
||||
|
||||
make CROSS_COMPILE=aarch64-linux-gnu- hikey_config
|
||||
make CROSS_COMPILE=aarch64-linux-gnu-
|
||||
> mkdir -p ./aarch64/bin
|
||||
> cd ./aarch64
|
||||
> git clone http://git.denx.de/u-boot.git
|
||||
> make CROSS_COMPILE=aarch64-linux-gnu- hikey_config
|
||||
> make CROSS_COMPILE=aarch64-linux-gnu-
|
||||
> cp u-boot.bin ./aarch64/bin/u-boot-hikey.bin
|
||||
|
||||
ARM Trusted Firmware (ATF) & l-loader
|
||||
=====================================
|
||||
@ -34,27 +38,34 @@ ARM Trusted Firmware (ATF) & l-loader
|
||||
This u-boot port has been tested with l-loader, booting ATF, which then boots
|
||||
u-boot as the bl33.bin executable.
|
||||
|
||||
1. Get ATF source code
|
||||
git clone https://github.com/96boards/arm-trusted-firmware.git
|
||||
Get the BL30 mcu binary.
|
||||
> wget -P aarch64/bin https://builds.96boards.org/releases/hikey/linaro/binaries/15.05/mcuimage.bin
|
||||
|
||||
2. Compile ATF I use the makefile here
|
||||
http://people.linaro.org/~peter.griffin/hikey/hikey-u-boot-release_r1/build-tf.mak
|
||||
1. Get ATF source code
|
||||
> cd ./aarch64
|
||||
> git clone https://github.com/96boards/arm-trusted-firmware.git
|
||||
> cd ./arm-trusted-firmware
|
||||
|
||||
2. Compile ATF, I use the build-tf.mak in the directory with this README, and copy it to ATF directory
|
||||
> cp ../u-boot/board/hisilicon/hikey/build-tf.mak .
|
||||
> make -f build-tf.mak build
|
||||
|
||||
3. Get l-loader
|
||||
git clone https://github.com/96boards/l-loader.git
|
||||
> cd ../
|
||||
> git clone https://github.com/96boards/l-loader.git
|
||||
> cd ./l-loader
|
||||
|
||||
4. Make sym links to ATF bip / fip binaries
|
||||
ln -s /home/griffinp/aarch64/bl1-hikey.bin bl1.bin
|
||||
ln -s /home/griffinp/aarch64/fip-hikey.bin fip.bin
|
||||
4. Make sym links to ATF bl1 / fip binaries
|
||||
> ln -s ../bin/bl1-hikey.bin bl1.bin
|
||||
> ln -s ../bin/fip-hikey.bin fip.bin
|
||||
|
||||
arm-linux-gnueabihf-gcc -c -o start.o start.S
|
||||
arm-linux-gnueabihf-gcc -c -o debug.o debug.S
|
||||
arm-linux-gnueabihf-ld -Bstatic -Tl-loader.lds -Ttext 0xf9800800 start.o debug.o -o loader
|
||||
arm-linux-gnueabihf-objcopy -O binary loader temp
|
||||
|
||||
python gen_loader.py -o l-loader.bin --img_loader=temp --img_bl1=bl1.bin
|
||||
sudo bash -x generate_ptable.sh
|
||||
python gen_loader.py -o ptable.img --img_prm_ptable=prm_ptable.img --img_sec_ptable=sec_ptable.img
|
||||
> arm-linux-gnueabihf-gcc -c -o start.o start.S
|
||||
> arm-linux-gnueabihf-gcc -c -o debug.o debug.S
|
||||
> arm-linux-gnueabihf-ld -Bstatic -Tl-loader.lds -Ttext 0xf9800800 start.o debug.o -o loader
|
||||
> arm-linux-gnueabihf-objcopy -O binary loader temp
|
||||
> python gen_loader.py -o ../bin/l-loader.bin --img_loader=temp --img_bl1=bl1.bin
|
||||
> sudo bash -x generate_ptable.sh
|
||||
> python gen_loader.py -o ../bin/ptable.img --img_prm_ptable=./prm_ptable.img --img_sec_ptable=./sec_ptable.img
|
||||
|
||||
These instructions are adapted from
|
||||
https://github.com/96boards/documentation/wiki/HiKeyUEFI
|
||||
@ -62,37 +73,49 @@ https://github.com/96boards/documentation/wiki/HiKeyUEFI
|
||||
FLASHING
|
||||
========
|
||||
|
||||
1. Connect jumper J2 to go into recovery mode and flash l-loader.bin with
|
||||
fastboot using the hisi-idt.py utility
|
||||
1. Connect the second jumper on J15 BOOT SEL, to go into recovery mode and flash l-loader.bin with
|
||||
fastboot using the hisi-idt.py utility.
|
||||
|
||||
> git clone https://github.com/96boards/burn-boot.git
|
||||
> sudo python /home/griffinp/Software/hikey/burn-boot/hisi-idt.py -d /dev/ttyUSB0 --img1=/tmp/l-loader.bin
|
||||
> cd ../
|
||||
> git clone https://github.com/96boards/burn-boot.git
|
||||
|
||||
2. Once LED 0 comes on solid, it should be detected as a fastboot device
|
||||
(on some boards I've found this to be unreliable)
|
||||
The command below assumes HiKey enumerated as the first USB serial port
|
||||
> sudo ./burn-boot/hisi-idt.py -d /dev/ttyUSB0 --img1=./bin/l-loader.bin
|
||||
|
||||
sudo fastboot devices
|
||||
2. Once LED 0 comes on solid, it should be detected as a fastboot device by plugging a USB A to mini B
|
||||
cable from your PC to the USB OTG port of HiKey (on some boards I've found this to be unreliable).
|
||||
|
||||
> sudo fastboot devices
|
||||
|
||||
0123456789ABCDEF fastboot
|
||||
|
||||
3. Flash the images
|
||||
wget https://builds.96boards.org/releases/hikey/nvme.img
|
||||
sudo fastboot flash ptable ptable.img
|
||||
sudo fastboot flash fastboot fip.bin
|
||||
sudo fastboot flash nvme nvme.img
|
||||
> wget -P aarch64/bin wget https://builds.96boards.org/releases/hikey/linaro/binaries/latest/nvme.img
|
||||
> sudo fastboot flash ptable ./bin/ptable.img
|
||||
> sudo fastboot flash fastboot ./bin/fip-hikey.bin
|
||||
> sudo fastboot flash nvme ./bin/nvme.img
|
||||
|
||||
4. Disconnect jumper J2, and reset the board and you will now (hopefully)
|
||||
4. Disconnect second jumper on J15 BOOT SEL, and reset the board and you will now (hopefully)
|
||||
have ATF, booting u-boot from eMMC. On 'new' boards I've had to do the
|
||||
flashing twice in the past to avoid an ATF error.
|
||||
|
||||
Note: To get USB host working, also disconnect the USB OTG cable used for flashing. Otherwise you
|
||||
will get 'dwc_otg_core_host_init: Timeout!' errors.
|
||||
|
||||
See working boot trace below: -
|
||||
|
||||
debug EMMC boot: print init OK
|
||||
debug EMMC boot: send RST_N .
|
||||
debug EMMC boot: start eMMC boot......
|
||||
load fastboot1!
|
||||
|
||||
Switch to aarch64 mode. CPU0 executes at 0xf9801000!
|
||||
|
||||
INFO: BL1: 0xf9810000 - 0xf9817000 [size = 28672]
|
||||
NOTICE: Booting Trusted Firmware
|
||||
NOTICE: BL1: v1.1(release):a0c0399
|
||||
NOTICE: BL1: Built : 13:23:48, May 22 2015
|
||||
NOTICE: BL1: v1.1(debug):e8b7174
|
||||
NOTICE: BL1: Built : 19:16:44, Sep 8 2015
|
||||
INFO: BL1: RAM 0xf9810000 - 0xf9817000
|
||||
NOTICE: syspll frequency:1190494208Hz
|
||||
NOTICE: succeed to init lpddr3 rank0 dram phy
|
||||
INFO: lpddr3_freq_init, set ddrc 533mhz
|
||||
INFO: init ddr3 rank0
|
||||
@ -101,7 +124,14 @@ INFO: lpddr3_freq_init, set ddrc 800mhz
|
||||
INFO: init ddr3 rank0
|
||||
INFO: ddr3 rank1 init pass
|
||||
INFO: Elpida DDR
|
||||
INFO: ddr test value:0xa5a55a5a
|
||||
INFO: Hisilicon HiKey platform is initialized
|
||||
INFO: Using FIP
|
||||
INFO: Loading file 'bl2.bin' at address 0xf9818000
|
||||
INFO: File 'bl2.bin' loaded: 0xf9818000 - 0xf9821100
|
||||
NOTICE: BL1: Booting BL2
|
||||
INFO: BL1: BL2 address = 0xf9818000
|
||||
INFO: BL1: BL2 spsr = 0x3c5
|
||||
INFO: [BDID] [fff91c18] midr: 0x410fd033
|
||||
INFO: [BDID] [fff91c1c] board type: 0
|
||||
INFO: [BDID] [fff91c20] board id: 0x2b
|
||||
@ -112,24 +142,78 @@ INFO: acpu_dvfs_set_freq: support freq num is 5
|
||||
INFO: acpu_dvfs_set_freq: start prof is 0x4
|
||||
INFO: acpu_dvfs_set_freq: magic is 0x5a5ac5c5
|
||||
INFO: acpu_dvfs_set_freq: voltage:
|
||||
INFO: - 0: 0x3a
|
||||
INFO: - 1: 0x3a
|
||||
INFO: - 2: 0x4a
|
||||
INFO: - 3: 0x5b
|
||||
INFO: - 4: 0x6b
|
||||
NOTICE: acpu_dvfs_set_freq: set acpu freq success!NOTICE: BL2: v1.1(debug):a0c0399
|
||||
NOTICE: BL2: Built : 10:19:28, May 27 2015
|
||||
INFO: - 0: 0x49
|
||||
INFO: - 1: 0x49
|
||||
INFO: - 2: 0x50
|
||||
INFO: - 3: 0x60
|
||||
INFO: - 4: 0x78
|
||||
NOTICE: acpu_dvfs_set_freq: set acpu freq success!NOTICE: BL2: v1.1(debug):e8b7174
|
||||
NOTICE: BL2: Built : 19:16:46, Sep 8 2015
|
||||
INFO: BL2: Loading BL3-0
|
||||
INFO: Using FIP
|
||||
WARNING: Failed to access image 'bl30.bin' (-1)
|
||||
ERROR: Failed to load BL3-0 (-1)
|
||||
ERROR: Please burn mcu image:
|
||||
ERROR: sudo fastboot flash mcuimage mcuimage.bin
|
||||
INFO: Loading file 'bl30.bin' at address 0x1000000
|
||||
INFO: Skip reserving memory: 0x1000000 - 0x1023270
|
||||
INFO: File 'bl30.bin' loaded: 0x1000000 - 0x1023270
|
||||
INFO: bl2_plat_handle_bl30: [1000000] 3a334d43 34313032 2f38302f 30203133
|
||||
INFO: bl2_plat_handle_bl30: [10000c8] 0 0 b 0
|
||||
INFO: bl2_plat_handle_bl30: [1000190] 17 0 0 0
|
||||
INFO: bl2_plat_handle_bl30: [1023260] 0 0 0 0
|
||||
INFO: hisi_mcu_load_image: mcu sections 0:
|
||||
INFO: hisi_mcu_load_image: src = 0x1000200
|
||||
INFO: hisi_mcu_load_image: dst = 0xf6000000
|
||||
INFO: hisi_mcu_load_image: size = 512
|
||||
INFO: hisi_mcu_load_image: [SRC 0x1000200] 0x7600 0x201 0x1eae1 0x1ea71
|
||||
INFO: hisi_mcu_load_image: [DST 0xf6000000] 0x7600 0x201 0x1eae1 0x1ea71
|
||||
INFO: hisi_mcu_load_image: mcu sections 1:
|
||||
INFO: hisi_mcu_load_image: src = 0x1000400
|
||||
INFO: hisi_mcu_load_image: dst = 0xf6000200
|
||||
INFO: hisi_mcu_load_image: size = 27828
|
||||
INFO: hisi_mcu_load_image: [SRC 0x1000400] 0xbf00bf00 0x4815b672 0x48154780 0x60014915
|
||||
INFO: hisi_mcu_load_image: [DST 0xf6000200] 0xbf00bf00 0x4815b672 0x48154780 0x60014915
|
||||
INFO: hisi_mcu_load_image: mcu sections 2:
|
||||
INFO: hisi_mcu_load_image: src = 0x10070b4
|
||||
INFO: hisi_mcu_load_image: dst = 0xf6007200
|
||||
INFO: hisi_mcu_load_image: size = 1024
|
||||
INFO: hisi_mcu_load_image: [SRC 0x10070b4] 0x55 0x0 0x0 0x0
|
||||
INFO: hisi_mcu_load_image: [DST 0xf6007200] 0x55 0x0 0x0 0x0
|
||||
INFO: hisi_mcu_load_image: mcu sections 3:
|
||||
INFO: hisi_mcu_load_image: src = 0x10074b4
|
||||
INFO: hisi_mcu_load_image: dst = 0xfff8e000
|
||||
INFO: hisi_mcu_load_image: size = 12704
|
||||
INFO: hisi_mcu_load_image: [SRC 0x10074b4] 0x55 0x0 0x0 0x0
|
||||
INFO: hisi_mcu_load_image: [DST 0xfff8e000] 0x55 0x0 0x0 0x0
|
||||
INFO: hisi_mcu_load_image: mcu sections 4:
|
||||
INFO: hisi_mcu_load_image: src = 0x100a654
|
||||
INFO: hisi_mcu_load_image: dst = 0x5e00000
|
||||
INFO: hisi_mcu_load_image: size = 82912
|
||||
INFO: hisi_mcu_load_image: [SRC 0x100a654] 0x4ff0e92d 0x2cc5f645 0x2600b0ab 0x2c7cf6c0
|
||||
INFO: hisi_mcu_load_image: [DST 0x5e00000] 0x4ff0e92d 0x2cc5f645 0x2600b0ab 0x2c7cf6c0
|
||||
INFO: hisi_mcu_load_image: mcu sections 5:
|
||||
INFO: hisi_mcu_load_image: src = 0x101ea34
|
||||
INFO: hisi_mcu_load_image: dst = 0x5e143e0
|
||||
INFO: hisi_mcu_load_image: size = 12816
|
||||
INFO: hisi_mcu_load_image: [SRC 0x101ea34] 0x33323130 0x37363534 0x42413938 0x46454443
|
||||
INFO: hisi_mcu_load_image: [DST 0x5e143e0] 0x33323130 0x37363534 0x42413938 0x46454443
|
||||
INFO: hisi_mcu_load_image: mcu sections 6:
|
||||
INFO: hisi_mcu_load_image: src = 0x1021c44
|
||||
INFO: hisi_mcu_load_image: dst = 0x5e1c1d0
|
||||
INFO: hisi_mcu_load_image: size = 3060
|
||||
INFO: hisi_mcu_load_image: [SRC 0x1021c44] 0x0 0x0 0x0 0x0
|
||||
INFO: hisi_mcu_load_image: [DST 0x5e1c1d0] 0x0 0x0 0x0 0x0
|
||||
INFO: hisi_mcu_load_image: mcu sections 7:
|
||||
INFO: hisi_mcu_load_image: src = 0x1022838
|
||||
INFO: hisi_mcu_load_image: dst = 0x5e1cdc4
|
||||
INFO: hisi_mcu_load_image: size = 2616
|
||||
INFO: hisi_mcu_load_image: [SRC 0x1022838] 0xf80000a0 0x0 0xf80000ac 0x0
|
||||
INFO: hisi_mcu_load_image: [DST 0x5e1cdc4] 0xf80000a0 0x0 0xf80000ac 0x0
|
||||
INFO: hisi_mcu_start_run: AO_SC_SYS_CTRL2=0
|
||||
INFO: bl2_plat_handle_bl30: mcu pc is 42933301
|
||||
INFO: bl2_plat_handle_bl30: AO_SC_PERIPH_CLKSTAT4 is 39018f09
|
||||
INFO: BL2: TrustZone: protecting 16777216 bytes of memory at 0x3f000000
|
||||
INFO: BL2: Loading BL3-1
|
||||
INFO: Using FIP
|
||||
INFO: Loading file 'bl31.bin' at address 0xf9858000
|
||||
INFO: File 'bl31.bin' loaded: 0xf9858000 - 0xf9860010
|
||||
INFO: File 'bl31.bin' loaded: 0xf9858000 - 0xf9861010
|
||||
INFO: BL2: Loading BL3-2
|
||||
INFO: Using FIP
|
||||
WARNING: Failed to access image 'bl32.bin' (-1)
|
||||
@ -137,24 +221,37 @@ WARNING: Failed to load BL3-2 (-1)
|
||||
INFO: BL2: Loading BL3-3
|
||||
INFO: Using FIP
|
||||
INFO: Loading file 'bl33.bin' at address 0x35000000
|
||||
INFO: File 'bl33.bin' loaded: 0x35000000 - 0x35042938
|
||||
INFO: File 'bl33.bin' loaded: 0x35000000 - 0x3504c468
|
||||
NOTICE: BL1: Booting BL3-1
|
||||
NOTICE: BL3-1: v1.1(debug):a0c0399
|
||||
NOTICE: BL3-1: Built : 10:19:31, May 27 2015
|
||||
INFO: BL1: BL3-1 address = 0xf9858000
|
||||
INFO: BL1: BL3-1 spsr = 0x3cd
|
||||
INFO: BL1: BL3-1 params address = 0xf9821920
|
||||
INFO: BL1: BL3-1 plat params address = 0x0
|
||||
NOTICE: BL3-1: v1.1(debug):e8b7174
|
||||
NOTICE: BL3-1: Built : 19:16:49, Sep 8 2015
|
||||
INFO: BL3-1: Initializing runtime services
|
||||
INFO: BL3-1: Preparing for EL3 exit to normal world
|
||||
INFO: BL3-1: Next image address = 0x35000000
|
||||
INFO: BL3-1: Next image spsr = 0x3c9
|
||||
|
||||
|
||||
U-Boot 2015.04-00007-g1b3d379-dirty (May 27 2015 - 10:18:16) hikey
|
||||
U-Boot 2015.10-rc2 (Sep 08 2015 - 20:29:33 +0100)hikey
|
||||
|
||||
DRAM: 1008 MiB
|
||||
MMC: sd_card_detect: SD card present
|
||||
HI6553 PMIC init
|
||||
MMC: config_sd_carddetect: SD card not present
|
||||
HiKey DWMMC: 0, HiKey DWMMC: 1
|
||||
Card did not respond to voltage select!
|
||||
** Bad device mmc 1 **
|
||||
Using default environment
|
||||
|
||||
In: serial
|
||||
Out: serial
|
||||
Err: serial
|
||||
Net: Net Initialization Skipped
|
||||
No ethernet found.
|
||||
Hit any key to stop autoboot: 0
|
||||
starting USB...
|
||||
USB0: Core Release: 3.00a
|
||||
scanning bus 0 for devices... 2 USB Device(s) found
|
||||
scanning usb for storage devices... 0 Storage Device(s) found
|
||||
scanning usb for ethernet devices... 0 Ethernet Device(s) found
|
||||
|
||||
Loading…
Reference in New Issue
Block a user