imx6: aristainetos: add device tree from linux
Add device trees from Linux in preparation for driver model conversions. device tree files taken from Linux: 71ae5fc87c34: "Merge tag 'linux-kselftest-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest" and added SPDX license identifier. Signed-off-by: Heiko Schocher <hs@denx.de>
This commit is contained in:
Heiko Schocher
Stefano Babic
parent
593eb229db
commit
8fb028ee20
@ -576,6 +576,8 @@ dtb-$(CONFIG_MX53) += imx53-cx9020.dtb \
|
||||
|
||||
ifneq ($(CONFIG_MX6DL)$(CONFIG_MX6QDL)$(CONFIG_MX6S),)
|
||||
dtb-y += \
|
||||
imx6dl-aristainetos2_4.dtb \
|
||||
imx6dl-aristainetos2_7.dtb \
|
||||
imx6dl-brppt2.dtb \
|
||||
imx6dl-dhcom-pdk2.dtb \
|
||||
imx6dl-icore.dtb \
|
||||
|
||||
124
arch/arm/dts/imx6dl-aristainetos2_4.dts
Normal file
124
arch/arm/dts/imx6dl-aristainetos2_4.dts
Normal file
@ -0,0 +1,124 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0)
|
||||
/*
|
||||
* support for the imx6 based aristainetos2 board
|
||||
*
|
||||
* Copyright (C) 2019 Heiko Schocher <hs@denx.de>
|
||||
* Copyright (C) 2015 Heiko Schocher <hs@denx.de>
|
||||
*
|
||||
*/
|
||||
/dts-v1/;
|
||||
#include "imx6dl.dtsi"
|
||||
#include "imx6qdl-aristainetos2.dtsi"
|
||||
|
||||
/ {
|
||||
model = "aristainetos2 i.MX6 Dual Lite Board 4";
|
||||
compatible = "fsl,imx6dl";
|
||||
|
||||
memory@10000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x10000000 0x40000000>;
|
||||
};
|
||||
|
||||
display0: disp0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,imx-parallel-display";
|
||||
interface-pix-fmt = "rgb24";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ipu_disp>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
display0_in: endpoint {
|
||||
remote-endpoint = <&ipu1_di0_disp0>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
display_out: endpoint {
|
||||
remote-endpoint = <&panel_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ecspi1 {
|
||||
lcd_panel: display@0 {
|
||||
compatible = "lg,lg4573";
|
||||
spi-max-frequency = <10000000>;
|
||||
reg = <0>;
|
||||
power-on-delay = <10>;
|
||||
|
||||
display-timings {
|
||||
480x800p57 {
|
||||
native-mode;
|
||||
clock-frequency = <27000027>;
|
||||
hactive = <480>;
|
||||
vactive = <800>;
|
||||
hfront-porch = <10>;
|
||||
hback-porch = <59>;
|
||||
hsync-len = <10>;
|
||||
vback-porch = <15>;
|
||||
vfront-porch = <15>;
|
||||
vsync-len = <15>;
|
||||
hsync-active = <1>;
|
||||
vsync-active = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
port {
|
||||
panel_in: endpoint {
|
||||
remote-endpoint = <&display_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
touch: touch@4b {
|
||||
compatible = "atmel,maxtouch";
|
||||
reg = <0x4b>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <9 8>;
|
||||
};
|
||||
};
|
||||
|
||||
&ipu1_di0_disp0 {
|
||||
remote-endpoint = <&display0_in>;
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl_ipu_disp: ipudisp1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x31
|
||||
MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0xE1
|
||||
MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
|
||||
MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
|
||||
MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xE1
|
||||
MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xE1
|
||||
MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xE1
|
||||
MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xE1
|
||||
MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xE1
|
||||
MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xE1
|
||||
MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xE1
|
||||
MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xE1
|
||||
MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xE1
|
||||
MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xE1
|
||||
MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xE1
|
||||
MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xE1
|
||||
MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xE1
|
||||
MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xE1
|
||||
MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xe1
|
||||
MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xE1
|
||||
MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xE1
|
||||
MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xE1
|
||||
MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xE1
|
||||
MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xE1
|
||||
MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xE1
|
||||
MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xE1
|
||||
MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xE1
|
||||
MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xE1
|
||||
>;
|
||||
};
|
||||
};
|
||||
64
arch/arm/dts/imx6dl-aristainetos2_7.dts
Normal file
64
arch/arm/dts/imx6dl-aristainetos2_7.dts
Normal file
@ -0,0 +1,64 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0)
|
||||
/*
|
||||
* support for the imx6 based aristainetos2 board
|
||||
*
|
||||
* Copyright (C) 2019 Heiko Schocher <hs@denx.de>
|
||||
* Copyright (C) 2015 Heiko Schocher <hs@denx.de>
|
||||
*
|
||||
*/
|
||||
/dts-v1/;
|
||||
#include "imx6dl.dtsi"
|
||||
#include "imx6qdl-aristainetos2.dtsi"
|
||||
|
||||
/ {
|
||||
model = "aristainetos2 i.MX6 Dual Lite Board 7";
|
||||
compatible = "fsl,imx6dl";
|
||||
|
||||
memory@10000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x10000000 0x40000000>;
|
||||
};
|
||||
|
||||
panel: panel {
|
||||
compatible = "lg,lb070wv8";
|
||||
backlight = <&backlight>;
|
||||
enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
port {
|
||||
panel_in: endpoint {
|
||||
remote-endpoint = <&lvds0_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
touch: touch@4d {
|
||||
compatible = "atmel,maxtouch";
|
||||
reg = <0x4d>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <9 8>;
|
||||
};
|
||||
};
|
||||
|
||||
&ldb {
|
||||
status = "okay";
|
||||
|
||||
lvds-channel@0 {
|
||||
status = "okay";
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
lvds0_in: endpoint {
|
||||
remote-endpoint = <&ipu1_di0_lvds0>;
|
||||
};
|
||||
};
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
lvds0_out: endpoint {
|
||||
remote-endpoint = <&panel_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
611
arch/arm/dts/imx6qdl-aristainetos2.dtsi
Normal file
611
arch/arm/dts/imx6qdl-aristainetos2.dtsi
Normal file
@ -0,0 +1,611 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0)
|
||||
/*
|
||||
* support for the imx6 based aristainetos2 board
|
||||
*
|
||||
* Copyright (C) 2019 Heiko Schocher <hs@denx.de>
|
||||
* Copyright (C) 2015 Heiko Schocher <hs@denx.de>
|
||||
*
|
||||
*/
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/clock/imx6qdl-clock.h>
|
||||
|
||||
/ {
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm1 0 5000000>;
|
||||
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||
default-brightness-level = <7>;
|
||||
enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
reg_2p5v: regulator-2p5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "2P5V";
|
||||
regulator-min-microvolt = <2500000>;
|
||||
regulator-max-microvolt = <2500000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_usbh1_vbus: regulator-usbh1-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>;
|
||||
regulator-name = "usb_h1_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
reg_usbotg_vbus: regulator-usbotg-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>;
|
||||
regulator-name = "usb_otg_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&audmux {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_audmux>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&can1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_flexcan1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&can2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_flexcan2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ecspi1 {
|
||||
cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH
|
||||
&gpio4 10 GPIO_ACTIVE_HIGH
|
||||
&gpio4 11 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ecspi1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ecspi2 {
|
||||
cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH &gpio2 27 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ecspi2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ecspi4 {
|
||||
cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ecspi4>;
|
||||
status = "okay";
|
||||
|
||||
flash: m25p80@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "micron,n25q128a11", "jedec,spi-nor";
|
||||
spi-max-frequency = <20000000>;
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c1>;
|
||||
status = "okay";
|
||||
|
||||
pmic@58 {
|
||||
compatible = "dlg,da9063";
|
||||
reg = <0x58>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <04 0x8>;
|
||||
|
||||
regulators {
|
||||
bcore1 {
|
||||
regulator-name = "bcore1";
|
||||
regulator-always-on = <1>;
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
bcore2 {
|
||||
regulator-name = "bcore2";
|
||||
regulator-always-on = <1>;
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
bpro {
|
||||
regulator-name = "bpro";
|
||||
regulator-always-on = <1>;
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
bperi {
|
||||
regulator-name = "bperi";
|
||||
regulator-always-on = <1>;
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
bmem {
|
||||
regulator-name = "bmem";
|
||||
regulator-always-on = <1>;
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
ldo2 {
|
||||
regulator-name = "ldo2";
|
||||
regulator-always-on = <1>;
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo3 {
|
||||
regulator-name = "ldo3";
|
||||
regulator-always-on = <1>;
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
ldo4 {
|
||||
regulator-name = "ldo4";
|
||||
regulator-always-on = <1>;
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
ldo5 {
|
||||
regulator-name = "ldo5";
|
||||
regulator-always-on = <1>;
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
ldo6 {
|
||||
regulator-name = "ldo6";
|
||||
regulator-always-on = <1>;
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
ldo7 {
|
||||
regulator-name = "ldo7";
|
||||
regulator-always-on = <1>;
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
ldo8 {
|
||||
regulator-name = "ldo8";
|
||||
regulator-always-on = <1>;
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
ldo9 {
|
||||
regulator-name = "ldo9";
|
||||
regulator-always-on = <1>;
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
ldo10 {
|
||||
regulator-name = "ldo10";
|
||||
regulator-always-on = <1>;
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
ldo11 {
|
||||
regulator-name = "ldo11";
|
||||
regulator-always-on = <1>;
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
bio {
|
||||
regulator-name = "bio";
|
||||
regulator-always-on = <1>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
tmp103: tmp103@71 {
|
||||
compatible = "ti,tmp103";
|
||||
reg = <0x71>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c3>;
|
||||
status = "okay";
|
||||
|
||||
expander: tca6416@20 {
|
||||
compatible = "ti,tca6416";
|
||||
reg = <0x20>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
};
|
||||
|
||||
rtc@68 {
|
||||
compatible = "dallas,m41t00";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c4>;
|
||||
status = "okay";
|
||||
|
||||
eeprom@50{
|
||||
compatible = "atmel,24c64";
|
||||
reg = <0x50>;
|
||||
};
|
||||
|
||||
eeprom@57{
|
||||
compatible = "atmel,24c64";
|
||||
reg = <0x57>;
|
||||
};
|
||||
};
|
||||
|
||||
&fec {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_enet>;
|
||||
phy-mode = "rgmii";
|
||||
phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_LOW>;
|
||||
txd0-skew-ps = <0>;
|
||||
txd1-skew-ps = <0>;
|
||||
txd2-skew-ps = <0>;
|
||||
txd3-skew-ps = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpmi {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_gpmi_nand>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie {
|
||||
reset-gpio = <&gpio2 16 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart1>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart3>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh1 {
|
||||
vbus-supply = <®_usbh1_vbus>;
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg {
|
||||
vbus-supply = <®_usbotg_vbus>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usbotg>;
|
||||
disable-over-current;
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc1>;
|
||||
cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
|
||||
no-1-8-v;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc2>;
|
||||
cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
|
||||
wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
|
||||
no-1-8-v;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_gpio>;
|
||||
|
||||
pinctrl_audmux: audmux {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0
|
||||
MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0
|
||||
MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0
|
||||
MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_ecspi1: ecspi1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
|
||||
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
|
||||
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
|
||||
MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x100b1 /* SS0# */
|
||||
MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 /* SS1# */
|
||||
MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1 /* SS2# */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_ecspi2: ecspi2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
|
||||
MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
|
||||
MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
|
||||
MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 /* SS0# */
|
||||
MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x100b1 /* SS1# */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_ecspi4: ecspi4grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
|
||||
MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
|
||||
MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
|
||||
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x100b1 /* SS0# */
|
||||
MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 /* SS1# */
|
||||
MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_enet: enetgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
|
||||
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
|
||||
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_flexcan1: flexcan1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0
|
||||
MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_flexcan2: flexcan2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
|
||||
MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_gpio: gpiogrp {
|
||||
fsl,pins = <
|
||||
/* led enable */
|
||||
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
|
||||
/* LCD power enable */
|
||||
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
|
||||
/* led yellow */
|
||||
MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0
|
||||
/* led red */
|
||||
MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0
|
||||
/* led green */
|
||||
MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b0
|
||||
/* led blue */
|
||||
MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0
|
||||
/* Profibus IRQ */
|
||||
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
|
||||
/* FPGA IRQ */
|
||||
MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0
|
||||
/* spi bus #2 SS driver enable */
|
||||
MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x1b0b0
|
||||
/* RST_LOC# PHY reset input (has pull-down!)*/
|
||||
MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
|
||||
/* USB_OTG_ID = GPIO1_24*/
|
||||
MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x80000000
|
||||
/* Touchscreen IRQ */
|
||||
MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
|
||||
/* PCIe reset */
|
||||
MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_gpmi_nand: gpmi-nand {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
|
||||
MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
|
||||
MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
|
||||
MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
|
||||
MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
|
||||
MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
|
||||
MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
|
||||
MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
|
||||
MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
|
||||
MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
|
||||
MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
|
||||
MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
|
||||
MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
|
||||
MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
|
||||
MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c1: i2c1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
|
||||
MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c2: i2c2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
||||
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c3: i2c3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
|
||||
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c4: i2c4grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1
|
||||
MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pwm1: pwm1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0
|
||||
/* backlight enable */
|
||||
MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart1: uart1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1
|
||||
MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart2: uart2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart3: uart3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
|
||||
MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart4: uart4grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usbotg: usbotggrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbus {
|
||||
fsl,pins = <MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x130b0>;
|
||||
};
|
||||
|
||||
pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbus {
|
||||
fsl,pins = <MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x130b0>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc1: usdhc1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
|
||||
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
|
||||
MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
|
||||
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
|
||||
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
|
||||
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
|
||||
/* SD1 card detect input */
|
||||
MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0
|
||||
/* SD1 write protect input */
|
||||
MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2: usdhc2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x71
|
||||
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x71
|
||||
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71
|
||||
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71
|
||||
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71
|
||||
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71
|
||||
/* SD2 level shifter output enable */
|
||||
MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b0
|
||||
/* SD2 card detect input */
|
||||
MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
|
||||
/* SD2 write protect input */
|
||||
MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
|
||||
>;
|
||||
};
|
||||
};
|
||||
@ -4,3 +4,6 @@ S: Maintained
|
||||
F: board/aristainetos/
|
||||
F: include/configs/aristainetos2.h
|
||||
F: configs/aristainetos2_defconfig
|
||||
F: arch/arm/dts/imx6dl-aristainetos2_4.dts
|
||||
F: arch/arm/dts/imx6dl-aristainetos2_7.dts
|
||||
F: arch/arm/dts/imx6qdl-aristainetos2.dtsi
|
||||
|
||||
Loading…
Reference in New Issue
Block a user