leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

x86: Allow FSP Kconfig settings for all x86

Browse Source 
While queensbay is the first chip with these settings, others will want to
use them too. Make them common.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
This commit is contained in:
Simon Glass 2015-01-27 22:13:41 -07:00
parent f0809f9a38
commit 8ce24cd991
2 changed files with 38 additions and 38 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

38
arch/x86/Kconfig
View File

@ -344,6 +344,44 @@ config TSC_FREQ_IN_MHZ
help
The running frequency in MHz of Time-Stamp Counter (TSC).
config HAVE_FSP
bool "Add an Firmware Support Package binary"
help
Select this option to add an Firmware Support Package binary to
the resulting U-Boot image. It is a binary blob which U-Boot uses
to set up SDRAM and other chipset specific initialization.
Note: Without this binary U-Boot will not be able to set up its
SDRAM so will not boot.
config FSP_FILE
string "Firmware Support Package binary filename"
depends on HAVE_FSP
default "fsp.bin"
help
The filename of the file to use as Firmware Support Package binary
in the board directory.
config FSP_ADDR
hex "Firmware Support Package binary location"
depends on HAVE_FSP
default 0xfffc0000
help
FSP is not Position Independent Code (PIC) and the whole FSP has to
be rebased if it is placed at a location which is different from the
perferred base address specified during the FSP build. Use Intel's
Binary Configuration Tool (BCT) to do the rebase.
The default base address of 0xfffc0000 indicates that the binary must
be located at offset 0xc0000 from the beginning of a 1MB flash device.
config FSP_TEMP_RAM_ADDR
hex
default 0x2000000
help
Stack top address which is used in FspInit after DRAM is ready and
CAR is disabled.
source "arch/x86/cpu/coreboot/Kconfig"
source "arch/x86/cpu/ivybridge/Kconfig"

38
arch/x86/cpu/queensbay/Kconfig
View File

@ -11,44 +11,6 @@ config INTEL_QUEENSBAY
if INTEL_QUEENSBAY
config HAVE_FSP
bool "Add an Firmware Support Package binary"
help
Select this option to add an Firmware Support Package binary to
the resulting U-Boot image. It is a binary blob which U-Boot uses
to set up SDRAM and other chipset specific initialization.
Note: Without this binary U-Boot will not be able to set up its
SDRAM so will not boot.
config FSP_FILE
string "Firmware Support Package binary filename"
depends on HAVE_FSP
default "fsp.bin"
help
The filename of the file to use as Firmware Support Package binary
in the board directory.
config FSP_ADDR
hex "Firmware Support Package binary location"
depends on HAVE_FSP
default 0xfffc0000
help
FSP is not Position Independent Code (PIC) and the whole FSP has to
be rebased if it is placed at a location which is different from the
perferred base address specified during the FSP build. Use Intel's
Binary Configuration Tool (BCT) to do the rebase.
The default base address of 0xfffc0000 indicates that the binary must
be located at offset 0xc0000 from the beginning of a 1MB flash device.
config FSP_TEMP_RAM_ADDR
hex
default 0x2000000
help
Stack top address which is used in FspInit after DRAM is ready and
CAR is disabled.
config HAVE_CMC
bool "Add a Chipset Micro Code state machine binary"
help