leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

eNET: Implement eNET Watchdog

Browse Source 
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
This commit is contained in:
Graeme Russ 2010-04-24 00:05:58 +10:00 committed by Wolfgang Denk
parent f2a55055e9
commit 880c59e5ad
3 changed files with 47 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

45
board/eNET/eNET.c
View File

@ -45,6 +45,9 @@ DECLARE_GLOBAL_DATA_PTR;
unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN;
static void enet_timer_isr(void);
static void enet_toggle_run_led(void);
void init_sc520_enet (void)
{
/* Set CPU Speed to 100MHz */
@ -160,6 +163,10 @@ int last_stage_init(void)
major = minor = 0;
outb(0x00, LED_LATCH_ADDRESS);
register_timer_isr (enet_timer_isr);
printf("Serck Controls eNET\n");
return 0;
@ -218,3 +225,41 @@ void setup_pcat_compatibility()
writeb(SC520_IRQ_DISABLED, &sc520_mmcr->wpvmap);
writeb(SC520_IRQ_DISABLED, &sc520_mmcr->icemap);
}
void enet_timer_isr(void)
{
static long enet_ticks = 0;
enet_ticks++;
/* Toggle Watchdog every 100ms */
if ((enet_ticks % 100) == 0)
hw_watchdog_reset();
/* Toggle Run LED every 500ms */
if ((enet_ticks % 500) == 0)
enet_toggle_run_led();
}
void hw_watchdog_reset(void)
{
/* Watchdog Reset must be atomic */
long flag = disable_interrupts();
if (sc520_mmcr->piodata15_0 & WATCHDOG_PIO_BIT)
sc520_mmcr->pioclr15_0 = WATCHDOG_PIO_BIT;
else
sc520_mmcr->pioset15_0 = WATCHDOG_PIO_BIT;
if (flag)
enable_interrupts();
}
void enet_toggle_run_led(void)
{
unsigned char leds_state= inb(LED_LATCH_ADDRESS);
if (leds_state & LED_RUN_BITMASK)
outb(leds_state &~ LED_RUN_BITMASK, LED_LATCH_ADDRESS);
else
outb(leds_state | LED_RUN_BITMASK, LED_LATCH_ADDRESS);
}

1
board/eNET/hardware.h
View File

@ -31,5 +31,6 @@
#define LED_RX_BITMASK 0x08
#define LED_TX_BITMASK 0x10
#define LED_ERR_BITMASK 0x20
#define WATCHDOG_PIO_BIT 0x8000
#endif /* HARDWARE_H_ */

10
include/configs/eNET.h
View File

@ -53,7 +53,7 @@
* bottom (processor) board MUST be removed!
*/
#undef CONFIG_WATCHDOG
#undef CONFIG_HW_WATCHDOG
#define CONFIG_HW_WATCHDOG
/*-----------------------------------------------------------------------
* Serial Configuration
@ -233,14 +233,6 @@
#define CONFIG_NET_MULTI
#define CONFIG_RTL8139
/*-----------------------------------------------------------------------
* Hardware watchdog configuration
*/
#define CONFIG_SYS_WATCHDOG_PIO_BIT 0x8000
#define CONFIG_SYS_WATCHDIG_PIO_DATA SC520_PIODATA15_0
#define CONFIG_SYS_WATCHDIG_PIO_CLR SC520_PIOCLR15_0
#define CONFIG_SYS_WATCHDIG_PIO_SET SC520_PIOSET15_0
/*-----------------------------------------------------------------------
* FPGA configuration
*/