mpc8260: remove IPHASE4539 board support
This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Grandegger <wg@denx.de>
This commit is contained in:
Masahiro Yamada
Tom Rini
parent
d2fd1d6623
commit
87882f5727
@ -22,9 +22,6 @@ config TARGET_EP82XXM
|
||||
config TARGET_GW8260
|
||||
bool "Support gw8260"
|
||||
|
||||
config TARGET_IPHASE4539
|
||||
bool "Support IPHASE4539"
|
||||
|
||||
config TARGET_KM82XX
|
||||
bool "Support km82xx"
|
||||
|
||||
@ -35,7 +32,6 @@ source "board/cpu86/Kconfig"
|
||||
source "board/cpu87/Kconfig"
|
||||
source "board/ep82xxm/Kconfig"
|
||||
source "board/gw8260/Kconfig"
|
||||
source "board/iphase4539/Kconfig"
|
||||
source "board/keymile/km82xx/Kconfig"
|
||||
|
||||
endmenu
|
||||
|
||||
@ -1,9 +0,0 @@
|
||||
if TARGET_IPHASE4539
|
||||
|
||||
config SYS_BOARD
|
||||
default "iphase4539"
|
||||
|
||||
config SYS_CONFIG_NAME
|
||||
default "IPHASE4539"
|
||||
|
||||
endif
|
||||
@ -1,6 +0,0 @@
|
||||
IPHASE4539 BOARD
|
||||
M: Wolfgang Grandegger <wg@denx.de>
|
||||
S: Maintained
|
||||
F: board/iphase4539/
|
||||
F: include/configs/IPHASE4539.h
|
||||
F: configs/IPHASE4539_defconfig
|
||||
@ -1,10 +0,0 @@
|
||||
#
|
||||
# (C) Copyright 2006
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# (C) Copyright 2002 Wolfgang Grandegger <wg@denx.de>
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y := iphase4539.o flash.o
|
||||
@ -1,358 +0,0 @@
|
||||
|
||||
This file contains basic information on the port of U-Boot to IPHASE4539
|
||||
(Interphase 4539 T1/E1/J1 PMC Communications Controller).
|
||||
All the changes fit in the common U-Boot infrastructure, providing a new
|
||||
IPHASE4539-specific entry in makefiles. To build U-Boot for IPHASE4539,
|
||||
type "make IPHASE4539_config", edit the "include/config_IPHASE4539.h"
|
||||
file if necessary, then type "make".
|
||||
|
||||
|
||||
Common file modifications:
|
||||
--------------------------
|
||||
|
||||
The following common files have been modified by this project:
|
||||
(starting from the ppcboot-1.1.5/ directory)
|
||||
|
||||
MAKEALL - IPHASE4539 entry added
|
||||
Makefile - IPHASE4539_config entry added
|
||||
|
||||
|
||||
New files:
|
||||
----------
|
||||
|
||||
The following new files have been added by this project:
|
||||
(starting from the ppcboot-1.1.5/ directory)
|
||||
|
||||
board/iphase4539/ - board-specific directory
|
||||
board/iphase4539/Makefile - board-specific makefile
|
||||
board/iphase4539/config.mk - config file
|
||||
board/iphase4539/flash.c - flash driver (for AM29LV033C)
|
||||
board/iphase4539/ppcboot.lds - linker script
|
||||
board/iphase4539/iphase4539.c - ioport and memory initialization
|
||||
include/config_IPHASE4539.h - main configuration file
|
||||
|
||||
|
||||
New configuration options:
|
||||
--------------------------
|
||||
|
||||
CONFIG_IPHASE4539
|
||||
|
||||
Main board-specific option (should be defined for IPHASE4539).
|
||||
|
||||
|
||||
Acceptance criteria tests:
|
||||
--------------------------
|
||||
|
||||
The following tests have been conducted to validate the port of U-Boot
|
||||
to IPHASE4539:
|
||||
|
||||
1. Operation on serial console:
|
||||
|
||||
With SMC1 defined as console in the main configuration file, the U-Boot
|
||||
output appeared on the serial terminal connected to the 2.5mm stereo jack
|
||||
connector as follows:
|
||||
|
||||
------------------------------------------------------------------------------
|
||||
=> help
|
||||
base - print or set address offset
|
||||
bdinfo - print Board Info structure
|
||||
bootm - boot application image from memory
|
||||
bootp - boot image via network using BootP/TFTP protocol
|
||||
bootd - boot default, i.e., run 'bootcmd'
|
||||
cmp - memory compare
|
||||
coninfo - print console devices and informations
|
||||
cp - memory copy
|
||||
crc32 - checksum calculation
|
||||
dcache - enable or disable data cache
|
||||
echo - echo args to console
|
||||
erase - erase FLASH memory
|
||||
flinfo - print FLASH memory information
|
||||
go - start application at address 'addr'
|
||||
help - print online help
|
||||
icache - enable or disable instruction cache
|
||||
iminfo - print header information for application image
|
||||
loadb - load binary file over serial line (kermit mode)
|
||||
loads - load S-Record file over serial line
|
||||
loop - infinite loop on address range
|
||||
md - memory display
|
||||
mm - memory modify (auto-incrementing)
|
||||
mtest - simple RAM test
|
||||
mw - memory write (fill)
|
||||
nm - memory modify (constant address)
|
||||
printenv- print environment variables
|
||||
protect - enable or disable FLASH write protection
|
||||
rarpboot- boot image via network using RARP/TFTP protocol
|
||||
reset - Perform RESET of the CPU
|
||||
run - run commands in an environment variable
|
||||
saveenv - save environment variables to persistent storage
|
||||
setenv - set environment variables
|
||||
sleep - delay execution for some time
|
||||
source - run script from memory
|
||||
tftpboot- boot image via network using TFTP protocol
|
||||
and env variables ipaddr and serverip
|
||||
version - print monitor version
|
||||
? - alias for 'help'
|
||||
=>
|
||||
------------------------------------------------------------------------------
|
||||
|
||||
|
||||
2. Flash driver operation
|
||||
|
||||
The following sequence was performed to test the "flinfo" command:
|
||||
|
||||
------------------------------------------------------------------------------
|
||||
=> flinfo
|
||||
|
||||
Bank # 1: AMD AM29LV033C (32 Mbit, uniform sectors)
|
||||
Size: 4 MB in 64 Sectors
|
||||
Sector Start Addresses:
|
||||
FF800000 (RO) FF810000 (RO) FF820000 FF830000 FF840000
|
||||
FF850000 FF860000 FF870000 FF880000 FF890000
|
||||
FF8A0000 FF8B0000 FF8C0000 FF8D0000 FF8E0000
|
||||
FF8F0000 FF900000 FF910000 FF920000 FF930000
|
||||
FF940000 FF950000 FF960000 FF970000 FF980000
|
||||
FF990000 FF9A0000 FF9B0000 FF9C0000 FF9D0000
|
||||
FF9E0000 FF9F0000 FFA00000 FFA10000 FFA20000
|
||||
FFA30000 FFA40000 FFA50000 FFA60000 FFA70000
|
||||
FFA80000 FFA90000 FFAA0000 FFAB0000 FFAC0000
|
||||
FFAD0000 FFAE0000 FFAF0000 FFB00000 (RO) FFB10000 (RO)
|
||||
FFB20000 (RO) FFB30000 (RO) FFB40000 FFB50000 FFB60000
|
||||
FFB70000 FFB80000 FFB90000 FFBA0000 FFBB0000
|
||||
FFBC0000 FFBD0000 FFBE0000 FFBF0000
|
||||
------------------------------------------------------------------------------
|
||||
|
||||
Note: the Hardware Configuration Word (HWC) of the 8260 is on the
|
||||
first sector of the flash and should not be touched. The U-Boot
|
||||
environment variables are stored on second sector and U-Boot
|
||||
starts at the address 0xFFB00000.
|
||||
|
||||
|
||||
The following sequence was performed to test the erase command:
|
||||
|
||||
------------------------------------------------------------------------------
|
||||
=> cp 0 ff880000 10
|
||||
Copy to Flash... done
|
||||
=> md ff880000 20
|
||||
ff880000: ff000000 60000000 60000000 7c7f1b78 ....`...`...|..x
|
||||
ff880010: 7c9e2378 7cbd2b78 7cdc3378 7cfb3b78 |.#x|.+x|.3x|.;x
|
||||
ff880020: 3b000000 4811e0f5 48003719 480036a5 ;...H...H.7.H.6.
|
||||
ff880030: 480036f9 48003731 48005c5d 7c7a1b78 H.6.H.71H.\]|z.x
|
||||
ff880040: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880050: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880060: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880070: ffffffff ffffffff ffffffff ffffffff ................
|
||||
=> erase ff880000 ff88ffff
|
||||
Erase Flash from 0xff880000 to 0xff88ffff
|
||||
.. done
|
||||
Erased 1 sectors
|
||||
=> md ff880000
|
||||
ff880000: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880010: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880020: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880030: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880040: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880050: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880060: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880070: ffffffff ffffffff ffffffff ffffffff ................
|
||||
=> cp 0 ff880000 10
|
||||
Copy to Flash... done
|
||||
=> md ff880000 20
|
||||
ff880000: ff000000 60000000 60000000 7c7f1b78 ....`...`...|..x
|
||||
ff880010: 7c9e2378 7cbd2b78 7cdc3378 7cfb3b78 |.#x|.+x|.3x|.;x
|
||||
ff880020: 3b000000 4811e0f5 48003719 480036a5 ;...H...H.7.H.6.
|
||||
ff880030: 480036f9 48003731 48005c5d 7c7a1b78 H.6.H.71H.\]|z.x
|
||||
ff880040: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880050: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880060: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880070: ffffffff ffffffff ffffffff ffffffff ................
|
||||
=> erase 1:8
|
||||
Erase Flash Sectors 8-8 in Bank # 1
|
||||
.. done
|
||||
=> md ff880000 20
|
||||
ff880000: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880010: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880020: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880030: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880040: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880050: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880060: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880070: ffffffff ffffffff ffffffff ffffffff ................
|
||||
=> cp 0 ff880000 10
|
||||
Copy to Flash... done
|
||||
=> cp 0 ff890000 10
|
||||
=> md ff880000 20
|
||||
ff880000: ff000000 60000000 60000000 7c7f1b78 ....`...`...|..x
|
||||
ff880010: 7c9e2378 7cbd2b78 7cdc3378 7cfb3b78 |.#x|.+x|.3x|.;x
|
||||
ff880020: 3b000000 4811e0f5 48003719 480036a5 ;...H...H.7.H.6.
|
||||
ff880030: 480036f9 48003731 48005c5d 7c7a1b78 H.6.H.71H.\]|z.x
|
||||
ff880040: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880050: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880060: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880070: ffffffff ffffffff ffffffff ffffffff ................
|
||||
=> md ff890000
|
||||
ff890000: ff000000 60000000 60000000 7c7f1b78 ....`...`...|..x
|
||||
ff890010: 7c9e2378 7cbd2b78 7cdc3378 7cfb3b78 |.#x|.+x|.3x|.;x
|
||||
ff890020: 3b000000 4811e0f5 48003719 480036a5 ;...H...H.7.H.6.
|
||||
ff890030: 480036f9 48003731 48005c5d 7c7a1b78 H.6.H.71H.\]|z.x
|
||||
ff890040: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff890050: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff890060: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff890070: ffffffff ffffffff ffffffff ffffffff ................
|
||||
=> erase 1:8-9
|
||||
Erase Flash Sectors 8-9 in Bank # 1
|
||||
.... done
|
||||
=> md ff880000 20
|
||||
ff880000: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880010: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880020: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880030: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880040: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880050: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880060: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880070: ffffffff ffffffff ffffffff ffffffff ................
|
||||
=> md ff890000
|
||||
ff890000: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff890010: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff890020: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff890030: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff890040: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff890050: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff890060: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff890070: ffffffff ffffffff ffffffff ffffffff ................
|
||||
=>
|
||||
------------------------------------------------------------------------------
|
||||
|
||||
|
||||
The following sequence was performed to test the Flash programming commands:
|
||||
|
||||
------------------------------------------------------------------------------
|
||||
=> erase ff880000 ff88ffff
|
||||
Erase Flash from 0xff880000 to 0xff88ffff
|
||||
.. done
|
||||
Erased 1 sectors
|
||||
=> cp 0 ff880000 10
|
||||
Copy to Flash... done
|
||||
=> md 0 20
|
||||
00000000: ff000000 60000000 60000000 7c7f1b78 ....`...`...|..x
|
||||
00000010: 7c9e2378 7cbd2b78 7cdc3378 7cfb3b78 |.#x|.+x|.3x|.;x
|
||||
00000020: 3b000000 4811e0f5 48003719 480036a5 ;...H...H.7.H.6.
|
||||
00000030: 480036f9 48003731 48005c5d 7c7a1b78 H.6.H.71H.\]|z.x
|
||||
00000040: 3c83c000 2c040000 40823378 7c0000a6 <...,...@.3x|...
|
||||
00000050: 60000030 7c1b03a6 3c00c000 600035ec `..0|...<...`.5.
|
||||
00000060: 7c1a03a6 4c000064 00000000 00000000 |...L..d........
|
||||
00000070: 00000000 00000000 00000000 00000000 ................
|
||||
=> md ff880000 20
|
||||
ff880000: ff000000 60000000 60000000 7c7f1b78 ....`...`...|..x
|
||||
ff880010: 7c9e2378 7cbd2b78 7cdc3378 7cfb3b78 |.#x|.+x|.3x|.;x
|
||||
ff880020: 3b000000 4811e0f5 48003719 480036a5 ;...H...H.7.H.6.
|
||||
ff880030: 480036f9 48003731 48005c5d 7c7a1b78 H.6.H.71H.\]|z.x
|
||||
ff880040: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880050: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880060: ffffffff ffffffff ffffffff ffffffff ................
|
||||
ff880070: ffffffff ffffffff ffffffff ffffffff ................
|
||||
=>
|
||||
------------------------------------------------------------------------------
|
||||
|
||||
|
||||
The following sequence was performed to test storage of the environment
|
||||
variables in Flash:
|
||||
|
||||
------------------------------------------------------------------------------
|
||||
=> setenv foo bar
|
||||
=> saveenv
|
||||
Un-Protected 1 sectors
|
||||
Erasing Flash...
|
||||
.. done
|
||||
Erased 1 sectors
|
||||
Saving Environment to Flash...
|
||||
Protected 1 sectors
|
||||
=> reset
|
||||
...
|
||||
=> printenv
|
||||
...
|
||||
foo=bar
|
||||
...
|
||||
Environment size: 339/65532 bytes
|
||||
=>
|
||||
------------------------------------------------------------------------------
|
||||
|
||||
|
||||
The following sequence was performed to test image download and run over
|
||||
Ethernet interface (both interfaces were tested):
|
||||
|
||||
------------------------------------------------------------------------------
|
||||
=> tftpboot 40000 hello_world.bin
|
||||
ARP broadcast 1
|
||||
TFTP from server 10.0.0.1; our IP address is 10.0.0.8
|
||||
Filename 'hello_world.bin'.
|
||||
Load address: 0x40000
|
||||
Loading: #############
|
||||
done
|
||||
Bytes transferred = 65932 (1018c hex)
|
||||
=> go 40004
|
||||
## Starting application at 0x00040004 ...
|
||||
Hello World
|
||||
argc = 1
|
||||
argv[0] = "40004"
|
||||
argv[1] = "<NULL>"
|
||||
Hit any key to exit ...
|
||||
|
||||
## Application terminated, rc = 0x0
|
||||
=>
|
||||
------------------------------------------------------------------------------
|
||||
|
||||
|
||||
3. Known Problems
|
||||
|
||||
None for the moment.
|
||||
|
||||
|
||||
----------------------------------------------------------------------------
|
||||
U-Boot and Linux for Interphase 4539 T1/E1/J1 PMC Communications Controller
|
||||
----------------------------------------------------------------------------
|
||||
|
||||
U-Boot:
|
||||
|
||||
Configure and make U-Boot:
|
||||
|
||||
$ cd <path>/u-boot
|
||||
$ make IPHASE4539_config
|
||||
$ make dep
|
||||
$ make
|
||||
$ cp -p u-boot.bin /tftpboot
|
||||
|
||||
Load u-boot.bin into the Flash memory at 0xffb00000.
|
||||
|
||||
|
||||
Linux:
|
||||
|
||||
Configure and make Linux:
|
||||
|
||||
$ cd <patch>/linux-2.4
|
||||
$ make IPHASE4539_config
|
||||
$ make oldconfig
|
||||
$ make dep
|
||||
$ make uImage
|
||||
$ cp -p arch/powerpc/mbxboot/uImage /tftpboot
|
||||
|
||||
Load uImage via tftp and boot it.
|
||||
|
||||
|
||||
Flash organisation:
|
||||
|
||||
The following preliminary layout of the Flash memory
|
||||
is defined:
|
||||
|
||||
0xff800000 ( 0 - 64 kB): Hardware Configuration Word.
|
||||
0xff810000 ( 64 kB - 128 kB): U-Boot Environment.
|
||||
0xff820000 ( 128 kB - 3 MB): RAMdisk.
|
||||
0xffb00000 ( 3 MB - 3328 kB): U-Boot.
|
||||
0xffb40000 (3328 KB - 4 MB): Linux Kernel.
|
||||
|
||||
|
||||
For further information concerning U-Boot and Linux please consult
|
||||
the "DENX U-Boot and Linux Guide".
|
||||
|
||||
|
||||
(C) 2002 Wolfgang Grandegger, DENX Software Engineering, wg@denx.de
|
||||
===================================================================
|
||||
@ -1,474 +0,0 @@
|
||||
/*
|
||||
* (C) Copyright 2001
|
||||
* Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
|
||||
*
|
||||
* (C) Copyright 2002
|
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
*
|
||||
* Adapted for Interphase 4539 by Wolfgang Grandegger <wg@denx.de>.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <config.h>
|
||||
#include <common.h>
|
||||
#include <flash.h>
|
||||
#include <asm/io.h>
|
||||
|
||||
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
|
||||
|
||||
extern int hwc_flash_size(void);
|
||||
static ulong flash_get_size (u32 addr, flash_info_t *info);
|
||||
static int flash_get_offsets (u32 base, flash_info_t *info);
|
||||
static int write_word (flash_info_t *info, ulong dest, ulong data);
|
||||
static void flash_reset (u32 addr);
|
||||
|
||||
#define out8(a,v) *(volatile unsigned char*)(a) = v
|
||||
#define in8(a) *(volatile unsigned char*)(a)
|
||||
#define in32(a) *(volatile unsigned long*)(a)
|
||||
#define iobarrier_rw() eieio()
|
||||
|
||||
unsigned long flash_init (void)
|
||||
{
|
||||
unsigned int i;
|
||||
unsigned long flash_size = 0;
|
||||
unsigned long bank_size;
|
||||
unsigned int bank = 0;
|
||||
|
||||
/* Init: no FLASHes known */
|
||||
for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
|
||||
flash_info[i].flash_id = FLASH_UNKNOWN;
|
||||
flash_info[i].sector_count = 0;
|
||||
flash_info[i].size = 0;
|
||||
}
|
||||
|
||||
/* Initialise the BOOT Flash */
|
||||
if (bank == CONFIG_SYS_MAX_FLASH_BANKS) {
|
||||
puts ("Warning: not all Flashes are initialised !");
|
||||
return flash_size;
|
||||
}
|
||||
|
||||
bank_size = flash_get_size (CONFIG_SYS_FLASH_BASE, flash_info + bank);
|
||||
if (bank_size) {
|
||||
#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE && \
|
||||
CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MAX_FLASH_SIZE
|
||||
/* monitor protection ON by default */
|
||||
flash_protect(FLAG_PROTECT_SET,
|
||||
CONFIG_SYS_MONITOR_BASE,
|
||||
CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
|
||||
flash_info + bank);
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_ENV_IS_IN_FLASH
|
||||
/* ENV protection ON by default */
|
||||
flash_protect(FLAG_PROTECT_SET,
|
||||
CONFIG_ENV_ADDR,
|
||||
CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
|
||||
flash_info + bank);
|
||||
#endif
|
||||
|
||||
/* HWC protection ON by default */
|
||||
flash_protect(FLAG_PROTECT_SET,
|
||||
CONFIG_SYS_FLASH_BASE,
|
||||
CONFIG_SYS_FLASH_BASE + 0x10000 - 1,
|
||||
flash_info + bank);
|
||||
|
||||
flash_size += bank_size;
|
||||
bank++;
|
||||
} else {
|
||||
puts ("Warning: the BOOT Flash is not initialised !");
|
||||
}
|
||||
|
||||
return flash_size;
|
||||
}
|
||||
|
||||
/*
|
||||
* The following code cannot be run from FLASH!
|
||||
*/
|
||||
static ulong flash_get_size (u32 addr, flash_info_t *info)
|
||||
{
|
||||
volatile uchar value;
|
||||
#if 0
|
||||
int i;
|
||||
#endif
|
||||
|
||||
/* Write auto select command: read Manufacturer ID */
|
||||
out8(addr + 0x0555, 0xAA);
|
||||
iobarrier_rw();
|
||||
udelay(10);
|
||||
out8(addr + 0x02AA, 0x55);
|
||||
iobarrier_rw();
|
||||
udelay(10);
|
||||
out8(addr + 0x0555, 0x90);
|
||||
iobarrier_rw();
|
||||
udelay(10);
|
||||
|
||||
value = in8(addr);
|
||||
iobarrier_rw();
|
||||
udelay(10);
|
||||
switch (value | (value << 16)) {
|
||||
case AMD_MANUFACT:
|
||||
info->flash_id = FLASH_MAN_AMD;
|
||||
break;
|
||||
|
||||
case FUJ_MANUFACT:
|
||||
info->flash_id = FLASH_MAN_FUJ;
|
||||
break;
|
||||
|
||||
default:
|
||||
info->flash_id = FLASH_UNKNOWN;
|
||||
flash_reset (addr);
|
||||
return 0;
|
||||
}
|
||||
|
||||
value = in8(addr + 1); /* device ID */
|
||||
iobarrier_rw();
|
||||
|
||||
switch (value) {
|
||||
case AMD_ID_LV033C:
|
||||
info->flash_id += FLASH_AM033C;
|
||||
info->size = hwc_flash_size();
|
||||
if (info->size > CONFIG_SYS_MAX_FLASH_SIZE) {
|
||||
printf("U-Boot supports only %d MB\n",
|
||||
CONFIG_SYS_MAX_FLASH_SIZE);
|
||||
info->size = CONFIG_SYS_MAX_FLASH_SIZE;
|
||||
}
|
||||
info->sector_count = info->size / 0x10000;
|
||||
break; /* => 4 MB */
|
||||
|
||||
default:
|
||||
info->flash_id = FLASH_UNKNOWN;
|
||||
flash_reset (addr);
|
||||
return (0); /* => no or unknown flash */
|
||||
|
||||
}
|
||||
|
||||
if (!flash_get_offsets (addr, info)) {
|
||||
flash_reset (addr);
|
||||
return 0;
|
||||
}
|
||||
|
||||
#if 0
|
||||
/* check for protected sectors */
|
||||
for (i = 0; i < info->sector_count; i++) {
|
||||
/* read sector protection at sector address, (A7 .. A0) = 0x02 */
|
||||
/* D0 = 1 if protected */
|
||||
value = in8(info->start[i] + 2);
|
||||
iobarrier_rw();
|
||||
info->protect[i] = (value & 1) != 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Reset bank to read mode
|
||||
*/
|
||||
flash_reset (addr);
|
||||
|
||||
return (info->size);
|
||||
}
|
||||
|
||||
static int flash_get_offsets (u32 base, flash_info_t *info)
|
||||
{
|
||||
unsigned int i, size;
|
||||
|
||||
switch (info->flash_id & FLASH_TYPEMASK) {
|
||||
case FLASH_AM033C:
|
||||
/* set sector offsets for uniform sector type */
|
||||
size = info->size / info->sector_count;
|
||||
for (i = 0; i < info->sector_count; i++) {
|
||||
info->start[i] = base + i * size;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
return 0;
|
||||
}
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
int flash_erase (flash_info_t *info, int s_first, int s_last)
|
||||
{
|
||||
volatile u32 addr = info->start[0];
|
||||
int flag, prot, sect, l_sect;
|
||||
ulong start, now, last;
|
||||
|
||||
if (s_first < 0 || s_first > s_last) {
|
||||
if (info->flash_id == FLASH_UNKNOWN) {
|
||||
printf ("- missing\n");
|
||||
} else {
|
||||
printf ("- no sectors to erase\n");
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
if (info->flash_id == FLASH_UNKNOWN ||
|
||||
info->flash_id > FLASH_AMD_COMP) {
|
||||
printf ("Can't erase unknown flash type %08lx - aborted\n",
|
||||
info->flash_id);
|
||||
return 1;
|
||||
}
|
||||
|
||||
prot = 0;
|
||||
for (sect=s_first; sect<=s_last; ++sect) {
|
||||
if (info->protect[sect]) {
|
||||
prot++;
|
||||
}
|
||||
}
|
||||
|
||||
if (prot) {
|
||||
printf ("- Warning: %d protected sectors will not be erased!\n",
|
||||
prot);
|
||||
} else {
|
||||
printf ("\n");
|
||||
}
|
||||
|
||||
l_sect = -1;
|
||||
|
||||
/* Disable interrupts which might cause a timeout here */
|
||||
flag = disable_interrupts();
|
||||
|
||||
out8(addr + 0x555, 0xAA);
|
||||
iobarrier_rw();
|
||||
out8(addr + 0x2AA, 0x55);
|
||||
iobarrier_rw();
|
||||
out8(addr + 0x555, 0x80);
|
||||
iobarrier_rw();
|
||||
out8(addr + 0x555, 0xAA);
|
||||
iobarrier_rw();
|
||||
out8(addr + 0x2AA, 0x55);
|
||||
iobarrier_rw();
|
||||
|
||||
/* Start erase on unprotected sectors */
|
||||
for (sect = s_first; sect<=s_last; sect++) {
|
||||
if (info->protect[sect] == 0) { /* not protected */
|
||||
addr = info->start[sect];
|
||||
out8(addr, 0x30);
|
||||
iobarrier_rw();
|
||||
l_sect = sect;
|
||||
}
|
||||
}
|
||||
|
||||
/* re-enable interrupts if necessary */
|
||||
if (flag)
|
||||
enable_interrupts();
|
||||
|
||||
/* wait at least 80us - let's wait 1 ms */
|
||||
udelay (1000);
|
||||
|
||||
/*
|
||||
* We wait for the last triggered sector
|
||||
*/
|
||||
if (l_sect < 0)
|
||||
goto DONE;
|
||||
|
||||
start = get_timer (0);
|
||||
last = start;
|
||||
addr = info->start[l_sect];
|
||||
while ((in8(addr) & 0x80) != 0x80) {
|
||||
if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
|
||||
printf ("Timeout\n");
|
||||
return 1;
|
||||
}
|
||||
/* show that we're waiting */
|
||||
if ((now - last) > 1000) { /* every second */
|
||||
putc ('.');
|
||||
last = now;
|
||||
}
|
||||
iobarrier_rw();
|
||||
}
|
||||
|
||||
DONE:
|
||||
/* reset to read mode */
|
||||
flash_reset (info->start[0]);
|
||||
|
||||
printf (" done\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Copy memory to flash, returns:
|
||||
* 0 - OK
|
||||
* 1 - write timeout
|
||||
* 2 - Flash not erased
|
||||
*/
|
||||
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
|
||||
{
|
||||
ulong cp, wp, data;
|
||||
int i, l, rc;
|
||||
|
||||
wp = (addr & ~3); /* get lower word aligned address */
|
||||
|
||||
/*
|
||||
* handle unaligned start bytes
|
||||
*/
|
||||
if ((l = addr - wp) != 0) {
|
||||
data = 0;
|
||||
for (i=0, cp=wp; i<l; ++i, ++cp) {
|
||||
data = (data << 8) | (*(uchar *)cp);
|
||||
}
|
||||
for (; i<4 && cnt>0; ++i) {
|
||||
data = (data << 8) | *src++;
|
||||
--cnt;
|
||||
++cp;
|
||||
}
|
||||
for (; cnt==0 && i<4; ++i, ++cp) {
|
||||
data = (data << 8) | (*(uchar *)cp);
|
||||
}
|
||||
|
||||
if ((rc = write_word(info, wp, data)) != 0) {
|
||||
return (rc);
|
||||
}
|
||||
wp += 4;
|
||||
}
|
||||
|
||||
/*
|
||||
* handle word aligned part
|
||||
*/
|
||||
while (cnt >= 4) {
|
||||
data = 0;
|
||||
for (i=0; i<4; ++i) {
|
||||
data = (data << 8) | *src++;
|
||||
}
|
||||
if ((rc = write_word(info, wp, data)) != 0) {
|
||||
return (rc);
|
||||
}
|
||||
wp += 4;
|
||||
cnt -= 4;
|
||||
}
|
||||
|
||||
if (cnt == 0) {
|
||||
return (0);
|
||||
}
|
||||
|
||||
/*
|
||||
* handle unaligned tail bytes
|
||||
*/
|
||||
data = 0;
|
||||
for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
|
||||
data = (data << 8) | *src++;
|
||||
--cnt;
|
||||
}
|
||||
for (; i<4; ++i, ++cp) {
|
||||
data = (data << 8) | (*(uchar *)cp);
|
||||
}
|
||||
|
||||
return (write_word(info, wp, data));
|
||||
}
|
||||
|
||||
/*
|
||||
* Write a word to Flash, returns:
|
||||
* 0 - OK
|
||||
* 1 - write timeout
|
||||
* 2 - Flash not erased
|
||||
*/
|
||||
static int write_word (flash_info_t *info, ulong dest, ulong data)
|
||||
{
|
||||
volatile u32 addr = info->start[0];
|
||||
ulong start;
|
||||
int flag, i;
|
||||
|
||||
/* Check if Flash is (sufficiently) erased */
|
||||
if ((in32(dest) & data) != data) {
|
||||
return (2);
|
||||
}
|
||||
/* Disable interrupts which might cause a timeout here */
|
||||
flag = disable_interrupts();
|
||||
|
||||
/* first, perform an unlock bypass command to speed up flash writes */
|
||||
out8(addr + 0x555, 0xAA);
|
||||
iobarrier_rw();
|
||||
out8(addr + 0x2AA, 0x55);
|
||||
iobarrier_rw();
|
||||
out8(addr + 0x555, 0x20);
|
||||
iobarrier_rw();
|
||||
|
||||
/* write each byte out */
|
||||
for (i = 0; i < 4; i++) {
|
||||
char *data_ch = (char *)&data;
|
||||
out8(addr, 0xA0);
|
||||
iobarrier_rw();
|
||||
out8(dest+i, data_ch[i]);
|
||||
iobarrier_rw();
|
||||
udelay(10); /* XXX */
|
||||
}
|
||||
|
||||
/* we're done, now do an unlock bypass reset */
|
||||
out8(addr, 0x90);
|
||||
iobarrier_rw();
|
||||
out8(addr, 0x00);
|
||||
iobarrier_rw();
|
||||
|
||||
/* re-enable interrupts if necessary */
|
||||
if (flag)
|
||||
enable_interrupts();
|
||||
|
||||
/* data polling for D7 */
|
||||
start = get_timer (0);
|
||||
while ((in32(dest) & 0x80808080) != (data & 0x80808080)) {
|
||||
if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
|
||||
return (1);
|
||||
}
|
||||
iobarrier_rw();
|
||||
}
|
||||
|
||||
flash_reset (addr);
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
||||
/*
|
||||
* Reset bank to read mode
|
||||
*/
|
||||
static void flash_reset (u32 addr)
|
||||
{
|
||||
out8(addr, 0xF0); /* reset bank */
|
||||
iobarrier_rw();
|
||||
}
|
||||
|
||||
void flash_print_info (flash_info_t *info)
|
||||
{
|
||||
int i;
|
||||
|
||||
if (info->flash_id == FLASH_UNKNOWN) {
|
||||
printf ("missing or unknown FLASH type\n");
|
||||
return;
|
||||
}
|
||||
|
||||
switch (info->flash_id & FLASH_VENDMASK) {
|
||||
case FLASH_MAN_AMD: printf ("AMD "); break;
|
||||
case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
|
||||
case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break;
|
||||
default: printf ("Unknown Vendor "); break;
|
||||
}
|
||||
|
||||
switch (info->flash_id & FLASH_TYPEMASK) {
|
||||
case FLASH_AM033C: printf ("AM29LV033C (32 Mbit, uniform sectors)\n");
|
||||
break;
|
||||
default: printf ("Unknown Chip Type\n");
|
||||
break;
|
||||
}
|
||||
|
||||
if (info->size % 0x100000 == 0) {
|
||||
printf (" Size: %ld MB in %d Sectors\n",
|
||||
info->size / 0x100000, info->sector_count);
|
||||
}
|
||||
else if (info->size % 0x400 == 0) {
|
||||
printf (" Size: %ld KB in %d Sectors\n",
|
||||
info->size / 0x400, info->sector_count);
|
||||
}
|
||||
else {
|
||||
printf (" Size: %ld B in %d Sectors\n",
|
||||
info->size, info->sector_count);
|
||||
}
|
||||
|
||||
printf (" Sector Start Addresses:");
|
||||
for (i=0; i<info->sector_count; ++i) {
|
||||
if ((i % 5) == 0)
|
||||
printf ("\n ");
|
||||
printf (" %08lX%s",
|
||||
info->start[i],
|
||||
info->protect[i] ? " (RO)" : " "
|
||||
);
|
||||
}
|
||||
printf ("\n");
|
||||
}
|
||||
@ -1,408 +0,0 @@
|
||||
/*
|
||||
* (C) Copyright 2002 Wolfgang Grandegger <wg@denx.de>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <ioports.h>
|
||||
#include <mpc8260.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/immap_8260.h>
|
||||
|
||||
int hwc_flash_size (void);
|
||||
int hwc_local_sdram_size (void);
|
||||
int hwc_main_sdram_size (void);
|
||||
int hwc_serial_number (void);
|
||||
int hwc_mac_address (char *str);
|
||||
int hwc_manufact_date (char *str);
|
||||
int seeprom_read (int addr, uchar * data, int size);
|
||||
|
||||
/*
|
||||
* I/O Port configuration table
|
||||
*
|
||||
* if conf is 1, then that port pin will be configured at boot time
|
||||
* according to the five values podr/pdir/ppar/psor/pdat for that entry
|
||||
*
|
||||
* The port definitions are taken from the old firmware (see
|
||||
* also SYS/H/4539.H):
|
||||
*
|
||||
* ppar psor pdir podr pdat
|
||||
* PA: 0x02ffffff 0x02c00000 0xfc403fe6 0x00000000 0x02403fc0
|
||||
* PB: 0x0fffdeb0 0x000000b0 0x0f032347 0x00000000 0x0f000290
|
||||
* PC: 0x030ffa55 0x030f0040 0xbcf005ea 0x00000000 0xc0c0ba7d
|
||||
* PD: 0x09c04e3c 0x01000e3c 0x0a7ff1c3 0x00000000 0x00ce0ae9
|
||||
*/
|
||||
const iop_conf_t iop_conf_tab[4][32] = {
|
||||
|
||||
/* Port A configuration */
|
||||
{ /* conf ppar psor pdir podr pdat */
|
||||
{0, 1, 0, 0, 0, 0}, /* PA31 FCC1_TXENB SLAVE */
|
||||
{0, 1, 0, 1, 0, 0}, /* PA30 FCC1_TXCLAV SLAVE */
|
||||
{0, 1, 0, 1, 0, 0}, /* PA29 FCC1_TXSOC */
|
||||
{0, 1, 0, 0, 0, 0}, /* PA28 FCC1_RXENB SLAVE */
|
||||
{0, 1, 0, 0, 0, 0}, /* PA27 FCC1_RXSOC */
|
||||
{0, 1, 0, 1, 0, 0}, /* PA26 FCC1_RXCLAV SLAVE */
|
||||
{0, 1, 0, 1, 0, 1}, /* PA25 FCC1_TXD0 */
|
||||
{0, 1, 0, 1, 0, 1}, /* PA24 FCC1_TXD1 */
|
||||
{0, 1, 0, 1, 0, 1}, /* PA23 FCC1_TXD2 */
|
||||
{0, 1, 0, 1, 0, 1}, /* PA22 FCC1_TXD3 */
|
||||
{0, 1, 0, 1, 0, 1}, /* PA21 FCC1_TXD4 */
|
||||
{0, 1, 0, 1, 0, 1}, /* PA20 FCC1_TXD5 */
|
||||
{0, 1, 0, 1, 0, 1}, /* PA19 FCC1_TXD6 */
|
||||
{0, 1, 0, 1, 0, 1}, /* PA18 FCC1_TXD7 */
|
||||
{0, 1, 0, 0, 0, 0}, /* PA17 FCC1_RXD7 */
|
||||
{0, 1, 0, 0, 0, 0}, /* PA16 FCC1_RXD6 */
|
||||
{0, 1, 0, 0, 0, 0}, /* PA15 FCC1_RXD5 */
|
||||
{0, 1, 0, 0, 0, 0}, /* PA14 FCC1_RXD4 */
|
||||
{0, 1, 0, 0, 0, 0}, /* PA13 FCC1_RXD3 */
|
||||
{0, 1, 0, 0, 0, 0}, /* PA12 FCC1_RXD2 */
|
||||
{0, 1, 0, 0, 0, 0}, /* PA11 FCC1_RXD1 */
|
||||
{0, 1, 0, 0, 0, 0}, /* PA10 FCC1_RXD0 */
|
||||
{0, 1, 1, 1, 0, 1}, /* PA9 TDMA1_L1TXD */
|
||||
{0, 1, 1, 0, 0, 0}, /* PA8 TDMA1_L1RXD */
|
||||
{0, 0, 0, 0, 0, 0}, /* PA7 CONFIG0 */
|
||||
{0, 1, 1, 0, 0, 1}, /* PA6 TDMA1_L1RSYNC */
|
||||
{0, 0, 0, 1, 0, 0}, /* PA5 FCC2:RxAddr[2] */
|
||||
{0, 0, 0, 1, 0, 0}, /* PA4 FCC2:RxAddr[1] */
|
||||
{0, 0, 0, 1, 0, 0}, /* PA3 FCC2:RxAddr[0] */
|
||||
{0, 0, 0, 1, 0, 0}, /* PA2 FCC2:TxAddr[0] */
|
||||
{0, 0, 0, 1, 0, 0}, /* PA1 FCC2:TxAddr[1] */
|
||||
{0, 0, 0, 1, 0, 0} /* PA0 FCC2:TxAddr[2] */
|
||||
},
|
||||
/* Port B configuration */
|
||||
{ /* conf ppar psor pdir podr pdat */
|
||||
{0, 0, 0, 1, 0, 0}, /* PB31 FCC2_RXSOC */
|
||||
{0, 0, 0, 1, 0, 0}, /* PB30 FCC2_TXSOC */
|
||||
{0, 0, 0, 1, 0, 0}, /* PB29 FCC2_RXCLAV */
|
||||
{0, 0, 0, 0, 0, 0}, /* PB28 CONFIG2 */
|
||||
{0, 1, 1, 0, 0, 1}, /* PB27 FCC2_TXD0 */
|
||||
{0, 1, 1, 0, 0, 0}, /* PB26 FCC2_TXD1 */
|
||||
{0, 0, 0, 1, 0, 0}, /* PB25 FCC2_TXD4 */
|
||||
{0, 1, 1, 0, 0, 1}, /* PB24 FCC2_TXD5 */
|
||||
{0, 0, 0, 1, 0, 0}, /* PB23 FCC2_TXD6 */
|
||||
{0, 1, 0, 1, 0, 1}, /* PB22 FCC2_TXD7 */
|
||||
{0, 1, 0, 0, 0, 0}, /* PB21 FCC2_RXD7 */
|
||||
{0, 1, 0, 0, 0, 0}, /* PB20 FCC2_RXD6 */
|
||||
{0, 1, 0, 0, 0, 0}, /* PB19 FCC2_RXD5 */
|
||||
{0, 0, 0, 1, 0, 0}, /* PB18 FCC2_RXD4 */
|
||||
{1, 1, 0, 0, 0, 0}, /* PB17 FCC3_RX_DV */
|
||||
{1, 1, 0, 0, 0, 0}, /* PB16 FCC3_RX_ER */
|
||||
{1, 1, 0, 1, 0, 0}, /* PB15 FCC3_TX_ER */
|
||||
{1, 1, 0, 1, 0, 0}, /* PB14 FCC3_TX_EN */
|
||||
{1, 1, 0, 0, 0, 0}, /* PB13 FCC3_COL */
|
||||
{1, 1, 0, 0, 0, 0}, /* PB12 FCC3_CRS */
|
||||
{1, 1, 0, 0, 0, 0}, /* PB11 FCC3_RXD3 */
|
||||
{1, 1, 0, 0, 0, 0}, /* PB10 FCC3_RXD2 */
|
||||
{1, 1, 0, 0, 0, 0}, /* PB9 FCC3_RXD1 */
|
||||
{1, 1, 0, 0, 0, 0}, /* PB8 FCC3_RXD0 */
|
||||
{1, 1, 0, 1, 0, 1}, /* PB7 FCC3_TXD0 */
|
||||
{1, 1, 0, 1, 0, 1}, /* PB6 FCC3_TXD1 */
|
||||
{1, 1, 0, 1, 0, 1}, /* PB5 FCC3_TXD2 */
|
||||
{1, 1, 0, 1, 0, 1}, /* PB4 FCC3_TXD3 */
|
||||
{0, 0, 0, 0, 0, 0}, /* PB3 */
|
||||
{0, 0, 0, 0, 0, 0}, /* PB2 */
|
||||
{0, 0, 0, 0, 0, 0}, /* PB1 */
|
||||
{0, 0, 0, 0, 0, 0}, /* PB0 */
|
||||
},
|
||||
/* Port C configuration */
|
||||
{ /* conf ppar psor pdir podr pdat */
|
||||
{0, 1, 0, 0, 0, 1}, /* PC31 CLK1 */
|
||||
{0, 0, 0, 1, 0, 0}, /* PC30 U1MASTER_N */
|
||||
{0, 1, 0, 0, 0, 1}, /* PC29 CLK3 */
|
||||
{0, 0, 0, 1, 0, 1}, /* PC28 -MT90220_RST */
|
||||
{0, 1, 0, 0, 0, 1}, /* PC27 CLK5 */
|
||||
{0, 0, 0, 1, 0, 1}, /* PC26 -QUADFALC_RST */
|
||||
{0, 1, 1, 1, 0, 1}, /* PC25 BRG4 */
|
||||
{1, 0, 0, 1, 0, 0}, /* PC24 MDIO */
|
||||
{1, 0, 0, 1, 0, 0}, /* PC23 MDC */
|
||||
{0, 1, 0, 0, 0, 1}, /* PC22 CLK10 */
|
||||
{0, 0, 0, 1, 0, 0}, /* PC21 */
|
||||
{0, 1, 0, 0, 0, 1}, /* PC20 CLK12 */
|
||||
{0, 1, 0, 0, 0, 1}, /* PC19 CLK13 */
|
||||
{1, 1, 0, 0, 0, 1}, /* PC18 CLK14 */
|
||||
{0, 1, 0, 0, 0, 0}, /* PC17 CLK15 */
|
||||
{1, 1, 0, 0, 0, 1}, /* PC16 CLK16 */
|
||||
{0, 1, 1, 0, 0, 0}, /* PC15 FCC1_TXADDR0 SLAVE */
|
||||
{0, 1, 1, 0, 0, 0}, /* PC14 FCC1_RXADDR0 SLAVE */
|
||||
{0, 1, 1, 0, 0, 0}, /* PC13 FCC1_TXADDR1 SLAVE */
|
||||
{0, 1, 1, 0, 0, 0}, /* PC12 FCC1_RXADDR1 SLAVE */
|
||||
{0, 0, 0, 1, 0, 0}, /* PC11 FCC2_RXD2 */
|
||||
{0, 0, 0, 1, 0, 0}, /* PC10 FCC2_RXD3 */
|
||||
{0, 0, 0, 1, 0, 1}, /* PC9 LTMODE */
|
||||
{0, 0, 0, 1, 0, 1}, /* PC8 SELSYNC */
|
||||
{0, 1, 1, 0, 0, 0}, /* PC7 FCC1_TXADDR2 SLAVE */
|
||||
{0, 1, 1, 0, 0, 0}, /* PC6 FCC1_RXADDR2 SLAVE */
|
||||
{0, 0, 0, 1, 0, 0}, /* PC5 FCC2_TXCLAV MASTER */
|
||||
{0, 0, 0, 1, 0, 0}, /* PC4 FCC2_RXENB MASTER */
|
||||
{0, 0, 0, 1, 0, 0}, /* PC3 FCC2_TXD2 */
|
||||
{0, 0, 0, 1, 0, 0}, /* PC2 FCC2_TXD3 */
|
||||
{0, 0, 0, 0, 0, 1}, /* PC1 PTMC -PTEENB */
|
||||
{0, 0, 0, 1, 0, 1}, /* PC0 COMCLK_N */
|
||||
},
|
||||
/* Port D configuration */
|
||||
{ /* conf ppar psor pdir podr pdat */
|
||||
{0, 0, 0, 1, 0, 1}, /* PD31 -CAM_RST */
|
||||
{0, 0, 0, 1, 0, 0}, /* PD30 FCC2_TXENB */
|
||||
{0, 1, 1, 0, 0, 0}, /* PD29 FCC1_RXADDR3 SLAVE */
|
||||
{0, 1, 1, 0, 0, 1}, /* PD28 TDMC1_L1TXD */
|
||||
{0, 1, 1, 0, 0, 0}, /* PD27 TDMC1_L1RXD */
|
||||
{0, 1, 1, 0, 0, 1}, /* PD26 TDMC1_L1RSYNC */
|
||||
{0, 0, 0, 1, 0, 1}, /* PD25 LED0 -OFF */
|
||||
{0, 0, 0, 1, 0, 1}, /* PD24 LED5 -OFF */
|
||||
{1, 0, 0, 1, 0, 1}, /* PD23 -LXT971_RST */
|
||||
{0, 1, 1, 0, 0, 1}, /* PD22 TDMA2_L1TXD */
|
||||
{0, 1, 1, 0, 0, 0}, /* PD21 TDMA2_L1RXD */
|
||||
{0, 1, 1, 0, 0, 1}, /* PD20 TDMA2_L1RSYNC */
|
||||
{0, 0, 0, 1, 0, 0}, /* PD19 FCC2_TXADDR3 */
|
||||
{0, 0, 0, 1, 0, 0}, /* PD18 FCC2_RXADDR3 */
|
||||
{0, 1, 0, 1, 0, 0}, /* PD17 BRG2 */
|
||||
{0, 0, 0, 1, 0, 0}, /* PD16 */
|
||||
{0, 0, 0, 1, 0, 0}, /* PD15 PT2TO1 */
|
||||
{0, 0, 0, 1, 0, 1}, /* PD14 PT4TO3 */
|
||||
{0, 0, 0, 1, 0, 1}, /* PD13 -SWMODE */
|
||||
{0, 0, 0, 1, 0, 1}, /* PD12 -PTMODE */
|
||||
{0, 0, 0, 1, 0, 0}, /* PD11 FCC2_RXD0 */
|
||||
{0, 0, 0, 1, 0, 0}, /* PD10 FCC2_RXD1 */
|
||||
{1, 1, 0, 1, 0, 1}, /* PD9 SMC1_SMTXD */
|
||||
{1, 1, 0, 0, 0, 1}, /* PD8 SMC1_SMRXD */
|
||||
{0, 1, 1, 0, 0, 0}, /* PD7 FCC1_TXADDR3 SLAVE */
|
||||
{0, 0, 0, 1, 0, 0}, /* PD6 IMAMODE */
|
||||
{0, 0, 0, 0, 0, 0}, /* PD5 CONFIG2 */
|
||||
{0, 1, 0, 1, 0, 0}, /* PD4 BRG8 */
|
||||
{0, 0, 0, 0, 0, 0}, /* PD3 */
|
||||
{0, 0, 0, 0, 0, 0}, /* PD2 */
|
||||
{0, 0, 0, 0, 0, 0}, /* PD1 */
|
||||
{0, 0, 0, 0, 0, 0}, /* PD0 */
|
||||
}
|
||||
};
|
||||
|
||||
phys_size_t initdram (int board_type)
|
||||
{
|
||||
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
||||
volatile memctl8260_t *memctl = &immap->im_memctl;
|
||||
volatile uchar *base;
|
||||
ulong maxsize;
|
||||
int i;
|
||||
|
||||
memctl->memc_psrt = CONFIG_SYS_PSRT;
|
||||
memctl->memc_mptpr = CONFIG_SYS_MPTPR;
|
||||
|
||||
#ifndef CONFIG_SYS_RAMBOOT
|
||||
immap->im_siu_conf.sc_ppc_acr = 0x00000026;
|
||||
immap->im_siu_conf.sc_ppc_alrh = 0x01276345;
|
||||
immap->im_siu_conf.sc_ppc_alrl = 0x89ABCDEF;
|
||||
immap->im_siu_conf.sc_lcl_acr = 0x00000000;
|
||||
immap->im_siu_conf.sc_lcl_alrh = 0x01234567;
|
||||
immap->im_siu_conf.sc_lcl_alrl = 0x89ABCDEF;
|
||||
immap->im_siu_conf.sc_tescr1 = 0x00004000;
|
||||
immap->im_siu_conf.sc_ltescr1 = 0x00004000;
|
||||
|
||||
/* Init Main SDRAM */
|
||||
#define OP_VALUE 0x404A241A
|
||||
#define OP_VALUE_M (OP_VALUE & 0x87FFFFFF);
|
||||
base = (uchar *) CONFIG_SYS_SDRAM_BASE;
|
||||
memctl->memc_psdmr = 0x28000000 | OP_VALUE_M;
|
||||
*base = 0xFF;
|
||||
memctl->memc_psdmr = 0x08000000 | OP_VALUE_M;
|
||||
for (i = 0; i < 8; i++)
|
||||
*base = 0xFF;
|
||||
memctl->memc_psdmr = 0x18000000 | OP_VALUE_M;
|
||||
*(base + 0x110) = 0xFF;
|
||||
memctl->memc_psdmr = OP_VALUE;
|
||||
memctl->memc_lsdmr = 0x4086A522;
|
||||
*base = 0xFF;
|
||||
|
||||
/* We must be able to test a location outsize the maximum legal size
|
||||
* to find out THAT we are outside; but this address still has to be
|
||||
* mapped by the controller. That means, that the initial mapping has
|
||||
* to be (at least) twice as large as the maximum expected size.
|
||||
*/
|
||||
maxsize = (1 + (~memctl->memc_or1 | 0x7fff)) / 2;
|
||||
|
||||
maxsize = get_ram_size((long *)base, maxsize);
|
||||
|
||||
memctl->memc_or1 |= ~(maxsize - 1);
|
||||
|
||||
if (maxsize != hwc_main_sdram_size ())
|
||||
printf ("Oops: memory test has not found all memory!\n");
|
||||
#endif
|
||||
|
||||
icache_enable ();
|
||||
/* return total ram size of SDRAM */
|
||||
return (maxsize);
|
||||
}
|
||||
|
||||
int checkboard (void)
|
||||
{
|
||||
char string[32];
|
||||
|
||||
hwc_manufact_date (string);
|
||||
|
||||
printf ("Board: Interphase 4539 (#%d %s)\n",
|
||||
hwc_serial_number (),
|
||||
string);
|
||||
|
||||
#ifdef DEBUG
|
||||
printf ("Manufacturing date: %s\n", string);
|
||||
printf ("Serial number : %d\n", hwc_serial_number ());
|
||||
printf ("FLASH size : %d MB\n", hwc_flash_size () >> 20);
|
||||
printf ("Main SDRAM size : %d MB\n", hwc_main_sdram_size () >> 20);
|
||||
printf ("Local SDRAM size : %d MB\n", hwc_local_sdram_size () >> 20);
|
||||
hwc_mac_address (string);
|
||||
printf ("MAC address : %s\n", string);
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int misc_init_r (void)
|
||||
{
|
||||
char *s, str[32];
|
||||
int num;
|
||||
|
||||
if ((s = getenv ("serial#")) == NULL &&
|
||||
(num = hwc_serial_number ()) != -1) {
|
||||
sprintf (str, "%06d", num);
|
||||
setenv ("serial#", str);
|
||||
}
|
||||
if ((s = getenv ("ethaddr")) == NULL && hwc_mac_address (str) == 0) {
|
||||
setenv ("ethaddr", str);
|
||||
}
|
||||
return (0);
|
||||
}
|
||||
|
||||
/***************************************************************
|
||||
* We take some basic Hardware Configuration Parameter from the
|
||||
* Serial EEPROM conected to the PSpan bridge. We keep it as
|
||||
* simple as possible.
|
||||
*/
|
||||
int hwc_flash_size (void)
|
||||
{
|
||||
uchar byte;
|
||||
|
||||
if (!seeprom_read (0x40, &byte, sizeof (byte))) {
|
||||
switch ((byte >> 2) & 0x3) {
|
||||
case 0x1:
|
||||
return 0x0400000;
|
||||
break;
|
||||
case 0x2:
|
||||
return 0x0800000;
|
||||
break;
|
||||
case 0x3:
|
||||
return 0x1000000;
|
||||
default:
|
||||
return 0x0100000;
|
||||
}
|
||||
}
|
||||
return -1;
|
||||
}
|
||||
int hwc_local_sdram_size (void)
|
||||
{
|
||||
uchar byte;
|
||||
|
||||
if (!seeprom_read (0x40, &byte, sizeof (byte))) {
|
||||
switch ((byte & 0x03)) {
|
||||
case 0x1:
|
||||
return 0x0800000;
|
||||
case 0x2:
|
||||
return 0x1000000;
|
||||
default:
|
||||
return 0; /* not present */
|
||||
}
|
||||
}
|
||||
return -1;
|
||||
}
|
||||
int hwc_main_sdram_size (void)
|
||||
{
|
||||
uchar byte;
|
||||
|
||||
if (!seeprom_read (0x41, &byte, sizeof (byte))) {
|
||||
return 0x1000000 << ((byte >> 5) & 0x7);
|
||||
}
|
||||
return -1;
|
||||
}
|
||||
int hwc_serial_number (void)
|
||||
{
|
||||
int sn = -1;
|
||||
|
||||
if (!seeprom_read (0xa0, (uchar *) &sn, sizeof (sn))) {
|
||||
sn = cpu_to_le32 (sn);
|
||||
}
|
||||
return sn;
|
||||
}
|
||||
int hwc_mac_address (char *str)
|
||||
{
|
||||
char mac[6];
|
||||
|
||||
if (!seeprom_read (0xb0, (uchar *)mac, sizeof (mac))) {
|
||||
sprintf (str, "%02x:%02x:%02x:%02x:%02x:%02x\n",
|
||||
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
|
||||
} else {
|
||||
strcpy (str, "ERROR");
|
||||
return -1;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
int hwc_manufact_date (char *str)
|
||||
{
|
||||
uchar byte;
|
||||
int value;
|
||||
|
||||
if (seeprom_read (0x92, &byte, sizeof (byte)))
|
||||
goto out;
|
||||
value = byte;
|
||||
if (seeprom_read (0x93, &byte, sizeof (byte)))
|
||||
goto out;
|
||||
value += byte << 8;
|
||||
sprintf (str, "%02d/%02d/%04d",
|
||||
value & 0x1F, (value >> 5) & 0xF,
|
||||
1980 + ((value >> 9) & 0x1FF));
|
||||
return 0;
|
||||
|
||||
out:
|
||||
strcpy (str, "ERROR");
|
||||
return -1;
|
||||
}
|
||||
|
||||
#define PSPAN_ADDR 0xF0020000
|
||||
#define EEPROM_REG 0x408
|
||||
#define EEPROM_READ_CMD 0xA000
|
||||
#define PSPAN_WRITE(a,v) \
|
||||
*((volatile unsigned long *)(PSPAN_ADDR+(a))) = v; eieio()
|
||||
#define PSPAN_READ(a) \
|
||||
*((volatile unsigned long *)(PSPAN_ADDR+(a)))
|
||||
|
||||
int seeprom_read (int addr, uchar * data, int size)
|
||||
{
|
||||
ulong val, cmd;
|
||||
int i;
|
||||
|
||||
for (i = 0; i < size; i++) {
|
||||
|
||||
cmd = EEPROM_READ_CMD;
|
||||
cmd |= ((addr + i) << 24) & 0xff000000;
|
||||
|
||||
/* Wait for ACT to authorize write */
|
||||
while ((val = PSPAN_READ (EEPROM_REG)) & 0x80)
|
||||
eieio ();
|
||||
|
||||
/* Write command */
|
||||
PSPAN_WRITE (EEPROM_REG, cmd);
|
||||
|
||||
/* Wait for data to be valid */
|
||||
while ((val = PSPAN_READ (EEPROM_REG)) & 0x80)
|
||||
eieio ();
|
||||
/* Do it twice, first read might be erratic */
|
||||
while ((val = PSPAN_READ (EEPROM_REG)) & 0x80)
|
||||
eieio ();
|
||||
|
||||
/* Read error */
|
||||
if (val & 0x00000040) {
|
||||
return -1;
|
||||
} else {
|
||||
data[i] = (val >> 16) & 0xff;
|
||||
}
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
@ -1,3 +0,0 @@
|
||||
CONFIG_PPC=y
|
||||
CONFIG_MPC8260=y
|
||||
CONFIG_TARGET_IPHASE4539=y
|
||||
@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order.
|
||||
|
||||
Board Arch CPU Commit Removed Last known maintainer/contact
|
||||
=================================================================================================
|
||||
IPHASE4539 powerpc mpc8260 - - Wolfgang Grandegger <wg@denx.de>
|
||||
muas3001 powerpc mpc8260 - - Heiko Schocher <hs@denx.de>
|
||||
PM825 powerpc mpc8260 - - Wolfgang Denk <wd@denx.de>
|
||||
PM826 powerpc mpc8260 - - Wolfgang Denk <wd@denx.de>
|
||||
|
||||
@ -1,328 +0,0 @@
|
||||
/*
|
||||
* (C) Copyright 2002 Wolfgang Grandegger <wg@denx.de>
|
||||
*
|
||||
* This file is based on similar values for other boards found in
|
||||
* other U-Boot config files, mainly tqm8260.h and mpc8260ads.h.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
/*
|
||||
* Config header file for a Interphase 4539 PMC, 64 MB SDRAM, 4MB Flash.
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* High Level Configuration Options
|
||||
* (easy to change)
|
||||
*/
|
||||
|
||||
#define CONFIG_IPHASE4539 1 /* ...on a Interphase 4539 PMC */
|
||||
|
||||
#define CONFIG_SYS_TEXT_BASE 0xffb00000
|
||||
|
||||
#define CONFIG_CPM2 1 /* Has a CPM2 */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* select serial console configuration
|
||||
*
|
||||
* if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
|
||||
* CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
|
||||
* for SCC).
|
||||
*
|
||||
* if CONFIG_CONS_NONE is defined, then the serial console routines must
|
||||
* defined elsewhere (for example, on the cogent platform, there are serial
|
||||
* ports on the motherboard which are used for the serial console - see
|
||||
* cogent/cma101/serial.[ch]).
|
||||
*/
|
||||
#define CONFIG_CONS_ON_SMC /* define if console on SMC */
|
||||
#undef CONFIG_CONS_ON_SCC /* define if console on SCC */
|
||||
#undef CONFIG_CONS_NONE /* define if console on something else */
|
||||
#define CONFIG_CONS_INDEX 1 /* which serial channel for console */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* select ethernet configuration
|
||||
*
|
||||
* if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
|
||||
* CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
|
||||
* for FCC)
|
||||
*
|
||||
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
|
||||
* defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
|
||||
*/
|
||||
#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
|
||||
#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
|
||||
#undef CONFIG_ETHER_NONE /* define if ether on something else */
|
||||
#define CONFIG_ETHER_INDEX 3 /* which channel for ether */
|
||||
|
||||
#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3)
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* - Rx-CLK is CLK14
|
||||
* - Tx-CLK is CLK16
|
||||
* - Select bus for bd/buffers (see 28-13)
|
||||
* - Half duplex
|
||||
*/
|
||||
# define CONFIG_SYS_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
|
||||
# define CONFIG_SYS_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK14 | CMXFCR_TF3CS_CLK16)
|
||||
# define CONFIG_SYS_CPMFCR_RAMTYPE 0
|
||||
# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
|
||||
|
||||
#endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
|
||||
|
||||
/* other options */
|
||||
|
||||
#define CONFIG_8260_CLKIN 66666666 /* in Hz */
|
||||
#define CONFIG_BAUDRATE 19200
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
#define CONFIG_BOOTP_SUBNETMASK
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
|
||||
/*
|
||||
* select i2c support configuration
|
||||
*
|
||||
* Supported configurations are {none, software, hardware} drivers.
|
||||
* If the software driver is chosen, there are some additional
|
||||
* configuration items that the driver uses to drive the port pins.
|
||||
*/
|
||||
#define CONFIG_SYS_I2C
|
||||
#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
|
||||
#define CONFIG_SYS_I2C_SOFT_SPEED 400000
|
||||
#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
|
||||
/*
|
||||
* Software (bit-bang) I2C driver configuration
|
||||
*/
|
||||
#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
|
||||
#define I2C_ACTIVE (iop->pdir |= 0x00010000)
|
||||
#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
|
||||
#define I2C_READ ((iop->pdat & 0x00010000) != 0)
|
||||
#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \
|
||||
else iop->pdat &= ~0x00010000
|
||||
#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
|
||||
else iop->pdat &= ~0x00020000
|
||||
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
|
||||
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
|
||||
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
|
||||
#define CONFIG_BOOTCOMMAND "bootm 100000" /* autoboot command */
|
||||
#define CONFIG_BOOTARGS "root=/dev/ram rw"
|
||||
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
|
||||
#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
|
||||
#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
|
||||
#define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */
|
||||
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
|
||||
#endif
|
||||
|
||||
#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
|
||||
#define CONFIG_SYS_MEMTEST_END 0x00F00000 /* 1 ... 15 MB in DRAM */
|
||||
|
||||
#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passed to Linux in MHz */
|
||||
/* for versions < 2.4.5-pre5 */
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
|
||||
|
||||
#define CONFIG_SYS_RESET_ADDRESS 0x04400000
|
||||
|
||||
#define CONFIG_MISC_INIT_R 1 /* We need misc_init_r() */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Start addresses for the final memory configuration (Setup by the
|
||||
* startup code). Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0.
|
||||
*/
|
||||
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
||||
#define CONFIG_SYS_FLASH_BASE 0xFF800000
|
||||
|
||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
||||
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
|
||||
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* FLASH organization
|
||||
*/
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max num of sects on one chip */
|
||||
#define CONFIG_SYS_MAX_FLASH_SIZE (CONFIG_SYS_MAX_FLASH_SECT * 0x10000) /* 4 MB */
|
||||
|
||||
#define CONFIG_SYS_FLASH_ERASE_TOUT 2400000 /* Flash Erase Timeout (in ms) */
|
||||
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
|
||||
|
||||
/* Environment in FLASH, there is little space left in Serial EEPROM */
|
||||
#define CONFIG_ENV_IS_IN_FLASH 1
|
||||
#define CONFIG_ENV_SECT_SIZE 0x10000 /* We use one complete sector */
|
||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x10000) /* 2. sector */
|
||||
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Hard Reset Configuration Words
|
||||
*
|
||||
* if you change bits in the HRCW, you must also change the CONFIG_SYS_*
|
||||
* defines for the various registers affected by the HRCW e.g. changing
|
||||
* HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
|
||||
*/
|
||||
#define CONFIG_SYS_HRCW_MASTER ( ( HRCW_BPS01 | HRCW_EBM ) |\
|
||||
( HRCW_L2CPC10 | HRCW_ISB110 ) |\
|
||||
( HRCW_MMR11 | HRCW_APPC10 ) |\
|
||||
( HRCW_CS10PC01 | HRCW_MODCK_H0101 ) \
|
||||
) /* 0x14863245 */
|
||||
|
||||
/* no slaves */
|
||||
#define CONFIG_SYS_HRCW_SLAVE1 0
|
||||
#define CONFIG_SYS_HRCW_SLAVE2 0
|
||||
#define CONFIG_SYS_HRCW_SLAVE3 0
|
||||
#define CONFIG_SYS_HRCW_SLAVE4 0
|
||||
#define CONFIG_SYS_HRCW_SLAVE5 0
|
||||
#define CONFIG_SYS_HRCW_SLAVE6 0
|
||||
#define CONFIG_SYS_HRCW_SLAVE7 0
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Internal Memory Mapped Register
|
||||
*/
|
||||
#define CONFIG_SYS_IMMR 0xFF000000 /* We keep original value */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Definitions for initial stack pointer and data area (in DPRAM)
|
||||
*/
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */
|
||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Cache Configuration
|
||||
*/
|
||||
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* HIDx - Hardware Implementation-dependent Registers 2-11
|
||||
*-----------------------------------------------------------------------
|
||||
* HID0 also contains cache control.
|
||||
*
|
||||
* HID1 has only read-only information - nothing to set.
|
||||
*/
|
||||
#define CONFIG_SYS_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
|
||||
HID0_IFEM|HID0_ABE)
|
||||
#define CONFIG_SYS_HID0_FINAL (HID0_IFEM|HID0_ABE)
|
||||
#define CONFIG_SYS_HID2 0
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* RMR - Reset Mode Register 5-5
|
||||
*-----------------------------------------------------------------------
|
||||
* turn on Checkstop Reset Enable
|
||||
*/
|
||||
#define CONFIG_SYS_RMR RMR_CSRE
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* BCR - Bus Configuration 4-25
|
||||
*-----------------------------------------------------------------------
|
||||
*/
|
||||
#define CONFIG_SYS_BCR 0xA01C0000
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* SIUMCR - SIU Module Configuration 4-31
|
||||
*-----------------------------------------------------------------------
|
||||
*/
|
||||
#define CONFIG_SYS_SIUMCR 0X4205C000
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* SYPCR - System Protection Control 4-35
|
||||
* SYPCR can only be written once after reset!
|
||||
*-----------------------------------------------------------------------
|
||||
* Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
|
||||
*/
|
||||
#if defined (CONFIG_WATCHDOG)
|
||||
#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
|
||||
SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
|
||||
#else
|
||||
#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
|
||||
SYPCR_SWRI|SYPCR_SWP)
|
||||
#endif /* CONFIG_WATCHDOG */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* TMCNTSC - Time Counter Status and Control 4-40
|
||||
* Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
|
||||
* and enable Time Counter
|
||||
*-----------------------------------------------------------------------
|
||||
*/
|
||||
#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* PISCR - Periodic Interrupt Status and Control 4-42
|
||||
*-----------------------------------------------------------------------
|
||||
* Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
|
||||
* Periodic timer
|
||||
*/
|
||||
#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* SCCR - System Clock Control 9-8
|
||||
*-----------------------------------------------------------------------
|
||||
* Ensure DFBRG is Divide by 16
|
||||
*/
|
||||
#define CONFIG_SYS_SCCR 0
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* RCCR - RISC Controller Configuration 13-7
|
||||
*-----------------------------------------------------------------------
|
||||
*/
|
||||
#define CONFIG_SYS_RCCR 0
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Init Memory Controller:
|
||||
*
|
||||
* Bank Bus Machine PortSz Device
|
||||
* ---- --- ------- ------ ------
|
||||
* 0 60x GPCM 64 bit FLASH
|
||||
* 1 60x SDRAM 64 bit SDRAM
|
||||
*/
|
||||
|
||||
#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK) | 0x0801)
|
||||
#define CONFIG_SYS_OR0_PRELIM 0xFF800882
|
||||
#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) | 0x0041)
|
||||
#define CONFIG_SYS_OR1_PRELIM 0xF8002CD0
|
||||
|
||||
#define CONFIG_SYS_PSDMR 0x404A241A
|
||||
#define CONFIG_SYS_MPTPR 0x00007400
|
||||
#define CONFIG_SYS_PSRT 0x00000007
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
Loading…
Reference in New Issue
Block a user