leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

rockchip: rk3188: add board_debug_uart_init()

Browse Source 
Use board_debug_uart_init() for UART iomux init instead of
do it in board_init_f, and move the function to soc file so
that we can find all the soc/board setting in soc file and
use a common board file.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
This commit is contained in:
Kever Yang 2019-03-29 09:09:01 +08:00 committed by Philipp Tomsich
parent 7f3eec03d5
commit 86d0eca451
3 changed files with 38 additions and 27 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

28
arch/arm/mach-rockchip/rk3188-board-spl.c
View File

@ -93,38 +93,12 @@ static int setup_arm_clock(void)
return ret;
}
void board_debug_uart_init(void)
{
/* Enable early UART on the RK3188 */
#define GRF_BASE 0x20008000
struct rk3188_grf * const grf = (void *)GRF_BASE;
enum {
GPIO1B1_SHIFT = 2,
GPIO1B1_MASK = 3,
GPIO1B1_GPIO = 0,
GPIO1B1_UART2_SOUT,
GPIO1B0_SHIFT = 0,
GPIO1B0_MASK = 3,
GPIO1B0_GPIO = 0,
GPIO1B0_UART2_SIN,
};
/* Enable early UART on the RK3188 */
rk_clrsetreg(&grf->gpio1b_iomux,
GPIO1B1_MASK << GPIO1B1_SHIFT |
GPIO1B0_MASK << GPIO1B0_SHIFT,
GPIO1B1_UART2_SOUT << GPIO1B1_SHIFT |
GPIO1B0_UART2_SIN << GPIO1B0_SHIFT);
}
void board_init_f(ulong dummy)
{
struct udevice *dev;
int ret;
#define EARLY_UART
#ifdef EARLY_UART
#ifdef CONFIG_DEBUG_UART
/*
* Debug UART can be used from here if required:
*

1
arch/arm/mach-rockchip/rk3188/Makefile
View File

@ -6,5 +6,6 @@
ifndef CONFIG_TPL_BUILD
obj-y += clk_rk3188.o
obj-y += rk3188.o
obj-y += syscon_rk3188.o
endif

36
arch/arm/mach-rockchip/rk3188/rk3188.c Normal file
View File

@ -0,0 +1,36 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2019 Rockchip Electronics Co., Ltd
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch-rockchip/grf_rk3188.h>
#include <asm/arch-rockchip/hardware.h>
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
void board_debug_uart_init(void)
{
/* Enable early UART on the RK3188 */
#define GRF_BASE 0x20008000
struct rk3188_grf * const grf = (void *)GRF_BASE;
enum {
GPIO1B1_SHIFT = 2,
GPIO1B1_MASK = 3,
GPIO1B1_GPIO = 0,
GPIO1B1_UART2_SOUT,
GPIO1B1_JTAG_TDO,
GPIO1B0_SHIFT = 0,
GPIO1B0_MASK = 3,
GPIO1B0_GPIO = 0,
GPIO1B0_UART2_SIN,
GPIO1B0_JTAG_TDI,
};
rk_clrsetreg(&grf->gpio1b_iomux,
GPIO1B1_MASK << GPIO1B1_SHIFT |
GPIO1B0_MASK << GPIO1B0_SHIFT,
GPIO1B1_UART2_SOUT << GPIO1B1_SHIFT |
GPIO1B0_UART2_SIN << GPIO1B0_SHIFT);
}
#endif