ARM: uniphier: rename CONFIG_MACH_* to CONFIG_ARCH_UNIPHIER_*

I want these prefixed with CONFIG_ARCH_UNIPHIER_ to clarify
they belong to UniPhier SoC family.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This commit is contained in:
Masahiro Yamada 2015-09-22 00:27:34 +09:00
parent c8df23cf33
commit 8497ccc4c2
10 changed files with 32 additions and 32 deletions

View File

@ -8,20 +8,20 @@ config UNIPHIER_SMP
choice
prompt "UniPhier SoC select"
default MACH_PH1_PRO4
default ARCH_UNIPHIER_PH1_PRO4
config MACH_PH1_SLD3
config ARCH_UNIPHIER_PH1_SLD3
bool "PH1-sLD3"
select UNIPHIER_SMP
config MACH_PH1_LD4
config ARCH_UNIPHIER_PH1_LD4
bool "PH1-LD4"
config MACH_PH1_PRO4
config ARCH_UNIPHIER_PH1_PRO4
bool "PH1-Pro4"
select UNIPHIER_SMP
config MACH_PH1_SLD8
config ARCH_UNIPHIER_PH1_SLD8
bool "PH1-sLD8"
endchoice
@ -53,11 +53,11 @@ choice
config DDR_FREQ_1600
bool "DDR3 1600"
depends on MACH_PH1_SLD3 || MACH_PH1_LD4 || MACH_PH1_PRO4
depends on ARCH_UNIPHIER_PH1_SLD3 || ARCH_UNIPHIER_PH1_LD4 || ARCH_UNIPHIER_PH1_PRO4
config DDR_FREQ_1333
bool "DDR3 1333"
depends on MACH_PH1_SLD3 || MACH_PH1_LD4 || MACH_PH1_SLD8
depends on ARCH_UNIPHIER_PH1_SLD3 || ARCH_UNIPHIER_PH1_LD4 || ARCH_UNIPHIER_PH1_SLD8
endchoice

View File

@ -31,7 +31,7 @@ obj-y += timer.o
obj-$(CONFIG_MICRO_SUPPORT_CARD) += micro-support-card.o
obj-$(CONFIG_MACH_PH1_SLD3) += ph1-sld3/
obj-$(CONFIG_MACH_PH1_LD4) += ph1-ld4/
obj-$(CONFIG_MACH_PH1_PRO4) += ph1-pro4/
obj-$(CONFIG_MACH_PH1_SLD8) += ph1-sld8/
obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += ph1-sld3/
obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += ph1-ld4/
obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += ph1-pro4/
obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += ph1-sld8/

View File

@ -156,7 +156,8 @@ struct ddrphy {
/* SoC-specific parameters */
#define NR_DATX8_PER_DDRPHY 2
#if defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8)
#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) || \
defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8)
#define NR_DDRPHY_PER_CH 1
#else
#define NR_DDRPHY_PER_CH 2

View File

@ -9,7 +9,7 @@
#ifndef ARCH_SC_REGS_H
#define ARCH_SC_REGS_H
#if defined(CONFIG_MACH_PH1_SLD3)
#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3)
#define SC_BASE_ADDR 0xf1840000
#else
#define SC_BASE_ADDR 0x61840000

View File

@ -54,12 +54,10 @@ static void vpll_init(void)
tmp = readl(SG_PINMON0);
clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
#if defined(CONFIG_MACH_PH1_PRO4)
/* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */
if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ ||
clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ)
return;
#endif
/* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
tmp = readl(SC_VPLL27ACTRL);

View File

@ -1,7 +1,7 @@
CONFIG_ARM=y
CONFIG_ARCH_UNIPHIER=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_MACH_PH1_LD4=y
CONFIG_ARCH_UNIPHIER_PH1_LD4=y
CONFIG_MICRO_SUPPORT_CARD=y
CONFIG_SYS_TEXT_BASE=0x84000000
CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-ld4-ref"

View File

@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_UNIPHIER=y
CONFIG_MACH_PH1_SLD3=y
CONFIG_ARCH_UNIPHIER_PH1_SLD3=y
CONFIG_MICRO_SUPPORT_CARD=y
CONFIG_SYS_TEXT_BASE=0x84000000
CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-sld3-ref"

View File

@ -1,7 +1,7 @@
CONFIG_ARM=y
CONFIG_ARCH_UNIPHIER=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_MACH_PH1_SLD8=y
CONFIG_ARCH_UNIPHIER_PH1_SLD8=y
CONFIG_MICRO_SUPPORT_CARD=y
CONFIG_SYS_TEXT_BASE=0x84000000
CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-sld8-ref"

View File

@ -5,37 +5,37 @@ config PINCTRL_UNIPHIER_CORE
config PINCTRL_UNIPHIER_PH1_LD4
bool "UniPhier PH1-LD4 SoC pinctrl driver"
depends on MACH_PH1_LD4
depends on ARCH_UNIPHIER_PH1_LD4
default y
select PINCTRL_UNIPHIER_CORE
config PINCTRL_UNIPHIER_PH1_PRO4
bool "UniPhier PH1-Pro4 SoC pinctrl driver"
depends on MACH_PH1_PRO4
depends on ARCH_UNIPHIER_PH1_PRO4
default y
select PINCTRL_UNIPHIER_CORE
config PINCTRL_UNIPHIER_PH1_SLD8
bool "UniPhier PH1-sLD8 SoC pinctrl driver"
depends on MACH_PH1_SLD8
depends on ARCH_UNIPHIER_PH1_SLD8
default y
select PINCTRL_UNIPHIER_CORE
config PINCTRL_UNIPHIER_PH1_PRO5
bool "UniPhier PH1-Pro5 SoC pinctrl driver"
depends on MACH_PH1_PRO5
depends on ARCH_UNIPHIER_PH1_PRO5
default y
select PINCTRL_UNIPHIER_CORE
config PINCTRL_UNIPHIER_PROXSTREAM2
bool "UniPhier ProXstream2 SoC pinctrl driver"
depends on MACH_PROXSTREAM2
depends on ARCH_UNIPHIER_PROXSTREAM2
default y
select PINCTRL_UNIPHIER_CORE
config PINCTRL_UNIPHIER_PH1_LD6B
bool "UniPhier PH1-LD6b SoC pinctrl driver"
depends on MACH_PH1_LD6B
depends on ARCH_UNIPHIER_PH1_LD6B
default y
select PINCTRL_UNIPHIER_CORE

View File

@ -9,7 +9,7 @@
#ifndef __CONFIG_UNIPHIER_COMMON_H__
#define __CONFIG_UNIPHIER_COMMON_H__
#if defined(CONFIG_MACH_PH1_SLD3)
#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3)
#define CONFIG_DDR_NUM_CH0 2
#define CONFIG_DDR_NUM_CH1 1
#define CONFIG_DDR_NUM_CH2 1
@ -23,7 +23,7 @@
#define CONFIG_SDRAM2_SIZE 0x10000000
#endif
#if defined(CONFIG_MACH_PH1_LD4)
#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4)
#define CONFIG_DDR_NUM_CH0 1
#define CONFIG_DDR_NUM_CH1 1
@ -34,7 +34,7 @@
#define CONFIG_SDRAM1_SIZE 0x10000000
#endif
#if defined(CONFIG_MACH_PH1_PRO4)
#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4)
#define CONFIG_DDR_NUM_CH0 2
#define CONFIG_DDR_NUM_CH1 2
@ -45,7 +45,7 @@
#define CONFIG_SDRAM1_SIZE 0x20000000
#endif
#if defined(CONFIG_MACH_PH1_SLD8)
#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8)
#define CONFIG_DDR_NUM_CH0 1
#define CONFIG_DDR_NUM_CH1 1
@ -175,7 +175,7 @@
#define CONFIG_NAND_DENALI_ECC_SIZE 1024
#ifdef CONFIG_MACH_PH1_SLD3
#ifdef CONFIG_ARCH_UNIPHIER_PH1_SLD3
#define CONFIG_SYS_NAND_REGS_BASE 0xf8100000
#define CONFIG_SYS_NAND_DATA_BASE 0xf8000000
#else
@ -291,11 +291,12 @@
#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_NR_DRAM_BANKS 2
#if defined(CONFIG_MACH_PH1_SLD3) || defined(CONFIG_MACH_PH1_LD4) || \
defined(CONFIG_MACH_PH1_SLD8)
#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) || \
defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) || \
defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8)
#define CONFIG_SPL_TEXT_BASE 0x00040000
#endif
#if defined(CONFIG_MACH_PH1_PRO4)
#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4)
#define CONFIG_SPL_TEXT_BASE 0x00100000
#endif