leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

powerpc: remove support for kmtergr1 and MPC8309

Browse Source 
The kmtegr1 board is out of maintenance and can be removed. As it is the
only board in the tree using MPC8309 the support for this CPU is dropped
completely.

Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
This commit is contained in:
Holger Brunck 2022-08-19 16:55:06 +02:00 committed by Tom Rini
parent c50ff4a933
commit 845102cbe9
18 changed files with 3 additions and 1089 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
arch/powerpc/cpu/mpc83xx/Kconfig
View File

@ -132,15 +132,6 @@ config ARCH_MPC8308
select MPC83XX_PCIE1_SUPPORT
select MPC83XX_SECOND_I2C
config ARCH_MPC8309
bool
select ARCH_MPC830X
select MPC83XX_QUICC_ENGINE
select MPC83XX_PCI_SUPPORT
select MPC83XX_SECOND_I2C
select SYS_FSL_ERRATUM_ESDHC111
select FSL_ELBC
config ARCH_MPC831X
bool
select MPC83XX_PCI_SUPPORT

18
arch/powerpc/cpu/mpc83xx/hrcw/Kconfig
View File

@ -160,10 +160,6 @@ config QUICC_VCO_DIVIDER_2
config QUICC_VCO_DIVIDER_4
bool "4"
config QUICC_VCO_DIVIDER_8
depends on ARCH_MPC8309
bool "8"
endchoice
choice
@ -399,14 +395,6 @@ config BOOT_ROM_INTERFACE_ON_CHIP_BOOT_ROM
depends on ARCH_MPC837X
bool "PCI2"
config BOOT_ROM_INTERFACE_ESDHC
depends on ARCH_MPC8309
bool "eSDHC"
config BOOT_ROM_INTERFACE_SPI
depends on ARCH_MPC8309
bool "SPI"
config BOOT_ROM_INTERFACE_GPCM_8BIT
bool "Local bus GPCM - 8-bit ROM"
@ -623,8 +611,6 @@ config BOOT_ROM_INTERFACE
hex
default 0x0 if BOOT_ROM_INTERFACE_DDR_SDRAM
default 0x4 if BOOT_ROM_INTERFACE_PCI1
default 0x8 if BOOT_ROM_INTERFACE_ESDHC
default 0xc if BOOT_ROM_INTERFACE_SPI
default 0xc if BOOT_ROM_INTERFACE_ON_CHIP_BOOT_ROM
default 0x14 if BOOT_ROM_INTERFACE_GPCM_8BIT
default 0x18 if BOOT_ROM_INTERFACE_GPCM_16BIT
@ -676,12 +662,8 @@ config LDP_PIN_MUX_STATE
config QUICC_VCO_DIVIDER
int
default 0 if !MPC83XX_QUICC_ENGINE
default 0 if QUICC_VCO_DIVIDER_2 && ARCH_MPC8309
default 1 if QUICC_VCO_DIVIDER_4 && ARCH_MPC8309
default 2 if QUICC_VCO_DIVIDER_8 && ARCH_MPC8309
default 2 if QUICC_VCO_DIVIDER_2 && (ARCH_MPC832X || ARCH_MPC8360)
default 0 if QUICC_VCO_DIVIDER_4 && (ARCH_MPC832X || ARCH_MPC8360)
default 1 if QUICC_VCO_DIVIDER_8 && ARCH_MPC8360
config QUICC_DIV_FACTOR
int

2
arch/powerpc/cpu/mpc83xx/initreg/Kconfig.lcrr
View File

@ -1,6 +1,6 @@
menu "LCRR - Clock Ratio Register register"
if !ARCH_MPC8309 && !ARCH_MPC831X && !ARCH_MPC832X
if !ARCH_MPC831X && !ARCH_MPC832X
choice
prompt "DLL bypass"

17
arch/powerpc/cpu/mpc83xx/speed.c
View File

@ -93,8 +93,6 @@ int get_clocks(void)
u32 tsec1_clk;
u32 tsec2_clk;
u32 usbdr_clk;
#elif defined(CONFIG_ARCH_MPC8309)
u32 usbdr_clk;
#endif
#ifdef CONFIG_ARCH_MPC834X
u32 usbmph_clk;
@ -107,9 +105,7 @@ int get_clocks(void)
#if defined(CONFIG_FSL_ESDHC)
u32 sdhc_clk;
#endif
#if !defined(CONFIG_ARCH_MPC8309)
u32 enc_clk;
#endif
u32 lbiu_clk;
u32 lclk_clk;
u32 mem_clk;
@ -252,7 +248,6 @@ int get_clocks(void)
return -6;
}
#endif
#if !defined(CONFIG_ARCH_MPC8309)
switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
case 0:
enc_clk = 0;
@ -270,7 +265,6 @@ int get_clocks(void)
/* unknown SCCR_ENCCM value */
return -7;
}
#endif
#if defined(CONFIG_FSL_ESDHC)
switch ((sccr & SCCR_SDHCCM) >> SCCR_SDHCCM_SHIFT) {
@ -304,8 +298,6 @@ int get_clocks(void)
i2c1_clk = sdhc_clk;
#elif defined(CONFIG_ARCH_MPC837X)
i2c1_clk = enc_clk;
#elif defined(CONFIG_ARCH_MPC8309)
i2c1_clk = csb_clk;
#endif
#if !defined(CONFIG_ARCH_MPC832X)
i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
@ -434,8 +426,6 @@ int get_clocks(void)
gd->arch.tsec1_clk = tsec1_clk;
gd->arch.tsec2_clk = tsec2_clk;
gd->arch.usbdr_clk = usbdr_clk;
#elif defined(CONFIG_ARCH_MPC8309)
gd->arch.usbdr_clk = usbdr_clk;
#endif
#if defined(CONFIG_ARCH_MPC834X)
gd->arch.usbmph_clk = usbmph_clk;
@ -448,9 +438,7 @@ int get_clocks(void)
#if !defined(CONFIG_ARCH_MPC832X)
gd->arch.i2c2_clk = i2c2_clk;
#endif
#if !defined(CONFIG_ARCH_MPC8309)
gd->arch.enc_clk = enc_clk;
#endif
gd->arch.lbiu_clk = lbiu_clk;
gd->arch.lclk_clk = lclk_clk;
gd->mem_clk = mem_clk;
@ -524,10 +512,8 @@ static int do_clocks(struct cmd_tbl *cmdtp, int flag, int argc,
printf(" DDR Secondary: %-4s MHz\n",
strmhz(buf, gd->arch.mem_sec_clk));
#endif
#if !defined(CONFIG_ARCH_MPC8309)
printf(" SEC: %-4s MHz\n",
strmhz(buf, gd->arch.enc_clk));
#endif
printf(" I2C1: %-4s MHz\n",
strmhz(buf, gd->arch.i2c1_clk));
#if !defined(CONFIG_ARCH_MPC832X)
@ -546,9 +532,6 @@ static int do_clocks(struct cmd_tbl *cmdtp, int flag, int argc,
strmhz(buf, gd->arch.tsec2_clk));
printf(" USB DR: %-4s MHz\n",
strmhz(buf, gd->arch.usbdr_clk));
#elif defined(CONFIG_ARCH_MPC8309)
printf(" USB DR: %-4s MHz\n",
strmhz(buf, gd->arch.usbdr_clk));
#endif
#if defined(CONFIG_ARCH_MPC834X)
printf(" USB MPH: %-4s MHz\n",

33
arch/powerpc/dts/km8309-uboot.dtsi
View File

@ -1,33 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Hitachi Power Grids 8309 U-Boot specific Device Tree Source parts
*
* Copyright (C) 2020 Heiko Schocher <hs@denx.de>
*
*/
/ {
cpus {
u-boot,dm-pre-reloc;
PowerPC,8309@0 {
u-boot,dm-pre-reloc;
};
};
chosen {
stdout-path = &serial0;
};
};
&qe {
compatible = "fsl,qe", "simple-bus";
};
&soc {
u-boot,dm-pre-reloc;
};
&serial0 {
clock-frequency = <132000000>;
u-boot,dm-pre-reloc;
};

392
arch/powerpc/dts/kmtegr1.dts
View File

@ -1,392 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Hitachi Power Grids TEGR1 Device Tree Source
*
* Copyright (C) 2020 Heiko Schocher <hs@denx.de>
*
*/
/dts-v1/;
/ {
model = "KMTEGR1";
compatible = "hitachi,kmpbec8309";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet_zynq;
ethernet1 = &enet_piggy2;
serial0 = &serial0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8309@0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <32>; // 32 bytes
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <16384>; // L1, 16K
i-cache-size = <16384>; // L1, 16K
timebase-frequency = <66000000>;
bus-frequency = <264000000>;
clock-frequency = <264000000>;
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
soc: soc8309@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <264000000>;
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl,mpc8313-i2c","fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
clock-frequency = <400000>;
mux@70 {
compatible = "nxp,pca9547";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
i2c@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
/*
* Inventory EEPROM of the
* unit itself
*/
ivm@50 {
label = "MAIN_CTRL";
compatible = "dummy";
reg = <0x50>;
};
};
i2c@2 {
reg = <2>;
#address-cells = <1>;
#size-cells = <0>;
/* Temperature sensors */
temp@48 {
label = "front";
compatible = "national,lm75";
reg = <0x48>;
};
temp@49 {
label = "board";
compatible = "national,lm75";
reg = <0x49>;
};
temp@4a {
label = "power";
compatible = "national,lm75";
reg = <0x4a>;
};
temp@4b {
label = "bottom";
compatible = "national,lm75";
reg = <0x4b>;
};
};
i2c@6 {
reg = <6>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@5 {
reg = <5>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@7 {
reg = <7>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@3 {
reg = <3>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <264000000>;
interrupts = <9 0x8>;
interrupt-parent = <&ipic>;
};
dma@82a8 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8309-dma", "fsl,elo-dma";
reg = <0x82a8 4>;
ranges = <0 0x8100 0x1a8>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8309-dma-channel",
"fsl,elo-dma-channel";
reg = <0 0x80>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8309-dma-channel",
"fsl,elo-dma-channel";
reg = <0x80 0x80>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8309-dma-channel",
"fsl,elo-dma-channel";
reg = <0x100 0x80>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8309-dma-channel",
"fsl,elo-dma-channel";
reg = <0x180 0x28>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
};
ipic: pic@700 {
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "fsl,pq2pro-pic", "fsl,ipic";
interrupt-controller;
reg = <0x700 0x100>;
device_type = "ipic";
};
gpio1: gpio-controller@c00 {
#gpio-cells = <2>;
compatible = "fsl,mpc8309-gpio", "fsl,mpc8349-gpio";
reg = <0xc00 0x100>;
interrupts = <75 0x8>;
interrupt-parent = <&ipic>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio-controller@d00 {
#gpio-cells = <2>;
compatible = "fsl,mpc8309-gpio", "fsl,mpc8349-gpio";
reg = <0xd00 0x100>;
interrupts = <75 0x8>;
interrupt-parent = <&ipic>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
};
spi@7000 {
cell-index = <0>;
compatible = "fsl,spi";
reg = <0x7000 0x1000>;
interrupts = <16 0x8>;
interrupt-parent = <&ipic>;
mode = "cpu";
#address-cells = <1>;
#size-cells = <0>;
/* GPIO_15 chipselect for ZYNQ flash */
gpios = <&gpio1 15 0>;
zynq_flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,m25p80";
reg = <0>;
spi-max-frequency = <4000000>;
m25p,fast-read;
partition@0 {
label = "bootloader";
reg = <0x0 0x01000000>;
};
};
};
};
qe: qe@e0100000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
compatible = "fsl,qe";
ranges = <0x0 0xe0100000 0x00100000>;
reg = <0xe0100000 0x480>;
brg-frequency = <0>;
bus-frequency = <396000000>;
fsl,qe-num-snums = <32>;
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0x0 0x00010000 0x00004000>;
data-only@0 {
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
reg = <0x0 0x4000>;
};
};
/* ZYNQ (UCC1, MDIO 0x10, MII) */
enet_zynq: ethernet@2000 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <1>;
reg = <0x2000 0x200>;
interrupts = <32>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
/*id=0, full-dup, 100M, no-pause, no-asym_p*/
fixed-link = <0 1 100 0 0>;
rx-clock-name = "clk9";
tx-clock-name = "clk10";
phy-connection-type = "mii";
};
/* Piggy2 (UCC3, MDIO 0x00, RMII) */
enet_piggy2: ucc@2200 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <3>;
reg = <0x2200 0x200>;
interrupts = <34>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk12";
phy-handle = <&phy_piggy2>;
phy-connection-type = "rmii";
};
mdio@2320 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2320 0x38>;
compatible = "fsl,ucc-mdio";
/* Piggy2 (UCC3, MDIO 0x00, RMII) */
phy_piggy2: ethernet-phy@0 {
reg = <0x0>;
device_type = "ethernet-phy";
};
/* Explicitly set the tbi-phy to a non-zero address
* so that it does not conflict with phy_piggy2 that
* is unfortunately at address 0
*/
tbi1: tbi-phy@1 {
reg = <0x1>;
device_type = "tbi-phy";
};
};
qeic: interrupt-controller@80 {
interrupt-controller;
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x80>;
big-endian;
interrupts = <32 8 33 8>;
interrupt-parent = <&ipic>;
};
bootcount@0x13ff8 {
device_type = "bootcount";
compatible = "u-boot,bootcount";
reg = <0x13ff8 0x08>;
};
};
localbus@e0005000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8309-localbus", "fsl,pq2pro-localbus",
"simple-bus";
reg = <0xe0005000 0xd8>;
ranges = <0 0 0xf0000000 0x04000000
1 0 0xe8000000 0x01000000
2 0 0xe0000000 0x10000000
3 0 0xb0000000 0x10000000>;
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0x00000000 0x04000000>;
bank-width = <2>;
nornand = "nor";
#address-cells = <1>;
#size-cells = <1>;
use-advanced-sector-protection;
partition@0 { /* 768KB */
label = "u-boot";
reg = <0 0xc0000>;
};
partition@c0000 { /* 256KB */
label = "qe-fw";
reg = <0xc0000 0x40000>;
};
partition@100000 { /* 128KB */
label = "env";
reg = <0x100000 0x20000>;
};
partition@120000 { /* 128KB */
label = "envred";
reg = <0x120000 0x20000>;
};
partition@140000 { /* 64256KB */
label = "ubi0";
reg = <0x140000 0x3EC0000>;
};
};
};
};
#include "km8309-uboot.dtsi"

3
arch/powerpc/include/asm/arch-mpc83xx/gpio.h
View File

@ -8,8 +8,7 @@
*/
#if defined(CONFIG_ARCH_MPC8313) || defined(CONFIG_ARCH_MPC8308)
#define MPC83XX_GPIO_CTRLRS 1
#elif defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X) || \
defined(CONFIG_ARCH_MPC8309)
#elif defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X)
#define MPC83XX_GPIO_CTRLRS 2
#else
#define MPC83XX_GPIO_CTRLRS 0

2
arch/powerpc/include/asm/global_data.h
View File

@ -32,8 +32,6 @@ struct arch_global_data {
u32 tsec1_clk;
u32 tsec2_clk;
u32 usbdr_clk;
# elif defined(CONFIG_ARCH_MPC8309)
u32 usbdr_clk;
# endif
# if defined(CONFIG_ARCH_MPC834X)
u32 usbmph_clk;

60
arch/powerpc/include/asm/immap_83xx.h
View File

@ -64,14 +64,7 @@ typedef struct sysconf83xx {
#else
u32 pecr2; /* PCI Express control register 2 */
#endif
#if defined(CONFIG_ARCH_MPC8309)
u32 can_dbg_ctrl;
u32 res9a;
u32 gpr1;
u8 res9b[0xAC];
#else
u8 res9[0xB8];
#endif
} sysconf83xx_t;
/*
@ -604,11 +597,7 @@ typedef struct serdes83xx {
* On Chip ROM
*/
typedef struct rom83xx {
#if defined(CONFIG_ARCH_MPC8309)
u8 mem[0x8000];
#else
u8 mem[0x10000];
#endif
} rom83xx_t;
/*
@ -857,55 +846,6 @@ typedef struct immap {
u8 res8[0xC0000];
u8 qe[0x100000]; /* QE block */
} immap_t;
#elif defined(CONFIG_ARCH_MPC8309)
typedef struct immap {
sysconf83xx_t sysconf; /* System configuration */
wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
rtclk83xx_t rtc; /* Real Time Clock Module Registers */
rtclk83xx_t pit; /* Periodic Interval Timer */
gtm83xx_t gtm[2]; /* Global Timers Module */
ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
arbiter83xx_t arbiter; /* System Arbiter Registers */
reset83xx_t reset; /* Reset Module */
clk83xx_t clk; /* System Clock Module */
pmc83xx_t pmc; /* Power Management Control Module */
gpio83xx_t gpio[2]; /* General purpose I/O module */
u8 res0[0x500]; /* res0 1.25 KBytes added for 8309 */
qepi83xx_t qepi; /* QE Ports Interrupts Registers */
qepio83xx_t qepio; /* QE Parallel I/O ports */
u8 res1[0x800];
ddr83xx_t ddr; /* DDR Memory Controller Memory */
fsl_i2c_t i2c[2]; /* I2C Controllers */
u8 res2[0x1300];
duart83xx_t duart[2]; /* DUART */
u8 res3[0x200];
duart83xx_t duart1[2]; /* DUART */
u8 res4[0x500];
fsl_lbc_t im_lbc; /* Local Bus Controller Regs */
u8 res5[0x1000];
spi8xxx_t spi; /* Serial Peripheral Interface */
dma83xx_t dma; /* DMA */
pciconf83xx_t pci_conf[1]; /* PCI Configuration Registers */
u8 res7[0x80];
ios83xx_t ios; /* Sequencer (IOS) */
pcictrl83xx_t pci_ctrl[1]; /* PCI Control & Status Registers */
u8 res8[0x13A00];
u8 can1[0x1000]; /* Flexcan 1 */
u8 can2[0x1000]; /* Flexcan 2 */
u8 res9[0x5000];
usb83xx_t usb;
u8 res10[0x5000];
u8 can3[0x1000]; /* Flexcan 3 */
u8 can4[0x1000]; /* Flexcan 4 */
u8 res11[0x1000];
u8 dma1[0x2000]; /* DMA */
sdhc83xx_t sdhc; /* SDHC Controller */
u8 res12[0xC1000];
rom83xx_t rom; /* On Chip ROM */
u8 res13[0x8000];
u8 qe[0x100000]; /* QE block */
u8 res14[0xE00000];/* Added for 8309 */
} immap_t;
#endif
struct ccsr_gpio {

1
arch/powerpc/include/asm/mpc8xxx_spi.h
View File

@ -11,7 +11,6 @@
#include <asm/types.h>
#if defined(CONFIG_ARCH_MPC8308) || \
defined(CONFIG_ARCH_MPC8309) || \
defined(CONFIG_ARCH_MPC8313) || \
defined(CONFIG_ARCH_MPC834X) || \
defined(CONFIG_ARCH_MPC837X)

19
board/keymile/km83xx/Kconfig
View File

@ -61,25 +61,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
endif
if TARGET_KMTEGR1
config SYS_BOARD
default "km83xx"
config SYS_VENDOR
default "keymile"
config SYS_CONFIG_NAME
default "kmtegr1"
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
select ARCH_MPC8309
imply CMD_CRAMFS
imply FS_CRAMFS
endif
if TARGET_TUXX1
config SYS_BOARD

3
board/keymile/km83xx/MAINTAINERS
View File

@ -10,10 +10,8 @@ F: include/configs/tuxx1.h
F: configs/kmopti2_defconfig
F: configs/kmsupx5_defconfig
F: configs/kmtepr2_defconfig
F: configs/kmtegr1_defconfig
F: configs/tuge1_defconfig
F: configs/tuxx1_defconfig
F: arch/powerpc/dts/km8309-uboot.dtsi
F: arch/powerpc/dts/km8321-uboot.dtsi
F: arch/powerpc/dts/km8321.dtsi
F: arch/powerpc/dts/km836x-uboot.dtsi
@ -25,7 +23,6 @@ F: arch/powerpc/dts/kmeter1.dts
F: arch/powerpc/dts/kmopti2.dts
F: arch/powerpc/dts/kmsupc5.dts
F: arch/powerpc/dts/kmsupm5.dts
F: arch/powerpc/dts/kmtegr1.dts
F: arch/powerpc/dts/kmtepr2.dts
F: arch/powerpc/dts/kmtuge1.dts
F: arch/powerpc/dts/kmtuxa1.dts

201
configs/kmtegr1_defconfig
View File

@ -1,201 +0,0 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xF0000000
CONFIG_ENV_SIZE=0x4000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="kmtegr1"
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_SYS_CLK_FREQ=66000000
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_ENV_ADDR=0xF0100000
CONFIG_MPC83xx=y
CONFIG_HIGH_BATS=y
CONFIG_TARGET_KMTEGR1=y
CONFIG_SYSTEM_PLL_VCO_DIV_2=y
CONFIG_CORE_PLL_RATIO_2_1=y
CONFIG_QUICC_MULT_FACTOR_3=y
CONFIG_BOOT_MEMORY_SPACE_LOW=y
CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
CONFIG_BAT0=y
CONFIG_BAT0_NAME="SDRAM"
CONFIG_BAT0_BASE=0x00000000
CONFIG_BAT0_LENGTH_256_MBYTES=y
CONFIG_BAT0_ACCESS_RW=y
CONFIG_BAT0_ICACHE_INHIBITED=y
CONFIG_BAT0_ICACHE_GUARDED=y
CONFIG_BAT0_DCACHE_INHIBITED=y
CONFIG_BAT0_DCACHE_GUARDED=y
CONFIG_BAT0_USER_MODE_VALID=y
CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
CONFIG_BAT1=y
CONFIG_BAT1_NAME="IMMR"
CONFIG_BAT1_BASE=0xE0000000
CONFIG_BAT1_LENGTH_4_MBYTES=y
CONFIG_BAT1_ACCESS_RW=y
CONFIG_BAT1_ICACHE_INHIBITED=y
CONFIG_BAT1_ICACHE_GUARDED=y
CONFIG_BAT1_DCACHE_INHIBITED=y
CONFIG_BAT1_DCACHE_GUARDED=y
CONFIG_BAT1_USER_MODE_VALID=y
CONFIG_BAT1_SUPERVISOR_MODE_VALID=y
CONFIG_BAT2=y
CONFIG_BAT2_NAME="KMBEC_FPGA"
CONFIG_BAT2_BASE=0xE8000000
CONFIG_BAT2_LENGTH_128_MBYTES=y
CONFIG_BAT2_ACCESS_RW=y
CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y
CONFIG_BAT2_DCACHE_INHIBITED=y
CONFIG_BAT2_DCACHE_GUARDED=y
CONFIG_BAT2_USER_MODE_VALID=y
CONFIG_BAT2_SUPERVISOR_MODE_VALID=y
CONFIG_BAT3=y
CONFIG_BAT3_NAME="FLASH"
CONFIG_BAT3_BASE=0xF0000000
CONFIG_BAT3_LENGTH_256_MBYTES=y
CONFIG_BAT3_ACCESS_RW=y
CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y
CONFIG_BAT3_DCACHE_INHIBITED=y
CONFIG_BAT3_DCACHE_GUARDED=y
CONFIG_BAT3_USER_MODE_VALID=y
CONFIG_BAT3_SUPERVISOR_MODE_VALID=y
CONFIG_BAT4=y
CONFIG_BAT4_NAME="STACK_IN_DCACHE"
CONFIG_BAT4_BASE=0xE6000000
CONFIG_BAT4_ACCESS_RW=y
CONFIG_BAT4_USER_MODE_VALID=y
CONFIG_BAT4_SUPERVISOR_MODE_VALID=y
CONFIG_BAT6=y
CONFIG_BAT6_NAME="APP2"
CONFIG_BAT6_BASE=0xB0000000
CONFIG_BAT6_LENGTH_256_MBYTES=y
CONFIG_BAT6_ACCESS_RW=y
CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y
CONFIG_BAT6_DCACHE_INHIBITED=y
CONFIG_BAT6_DCACHE_GUARDED=y
CONFIG_BAT6_USER_MODE_VALID=y
CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
CONFIG_LBLAW0=y
CONFIG_LBLAW0_BASE=0xF0000000
CONFIG_LBLAW0_NAME="FLASH"
CONFIG_LBLAW0_LENGTH_256_MBYTES=y
CONFIG_LBLAW1=y
CONFIG_LBLAW1_BASE=0xE8000000
CONFIG_LBLAW1_NAME="KMBEC_FPGA"
CONFIG_LBLAW1_LENGTH_128_MBYTES=y
CONFIG_LBLAW3=y
CONFIG_LBLAW3_BASE=0xB0000000
CONFIG_LBLAW3_NAME="APP2"
CONFIG_LBLAW3_LENGTH_256_MBYTES=y
CONFIG_ELBC_BR0_OR0=y
CONFIG_BR0_OR0_NAME="FLASH"
CONFIG_BR0_OR0_BASE=0xF0000000
CONFIG_BR0_PORTSIZE_16BIT=y
CONFIG_OR0_AM_256_MBYTES=y
CONFIG_OR0_SCY_5=y
CONFIG_OR0_CSNT_EARLIER=y
CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
CONFIG_OR0_TRLX_RELAXED=y
CONFIG_OR0_EAD_EXTRA=y
CONFIG_ELBC_BR1_OR1=y
CONFIG_BR1_OR1_NAME="KMBEC_FPGA"
CONFIG_BR1_OR1_BASE=0xE8000000
CONFIG_OR1_AM_128_MBYTES=y
CONFIG_OR1_SCY_2=y
CONFIG_OR1_CSNT_EARLIER=y
CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
CONFIG_OR1_TRLX_RELAXED=y
CONFIG_OR1_EAD_EXTRA=y
CONFIG_ELBC_BR3_OR3=y
CONFIG_BR3_OR3_NAME="APP2"
CONFIG_BR3_OR3_BASE=0xB0000000
CONFIG_BR3_PORTSIZE_16BIT=y
CONFIG_OR3_AM_256_MBYTES=y
CONFIG_OR3_SCY_5=y
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_ACR_APARK_MASTER=y
CONFIG_ACR_PARKM_USB_I2C1_BOOT=y
CONFIG_LCRR_EADC_1=y
CONFIG_LCRR_CLKDIV_2=y
CONFIG_83XX_PCICLK=0x3ef1480
CONFIG_KM_DEF_NETDEV="eth1"
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_LAST_STAGE_INIT=y
CONFIG_MISC_INIT_R=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_MAXARGS=32
CONFIG_SYS_CBSIZE=512
CONFIG_SYS_PBSIZE=532
CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_CMD_IMLS=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
CONFIG_CMD_I2C=y
CONFIG_CMD_NAND=y
CONFIG_CMD_DHCP=y
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=boot,nand0=app"
CONFIG_MTDPARTS_DEFAULT="mtdparts=boot:768k(u-boot),256k(qe-fw),128k(env),128k(envred),-(ubi0);app:-(ubi1);"
CONFIG_CMD_DIAG=y
CONFIG_CMD_UBI=y
# CONFIG_CMD_UBIFS is not set
CONFIG_ENV_OVERWRITE=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_ENV_ADDR_REDUND=0xF0120000
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="UEC0"
CONFIG_VERSION_VARIABLE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_DM_BOOTCOUNT=y
CONFIG_BOOTCOUNT_MEM=y
CONFIG_SYS_BOOTCOUNT_BE=y
CONFIG_SYS_BR0_PRELIM_BOOL=y
CONFIG_SYS_BR0_PRELIM=0xF0001001
CONFIG_SYS_OR0_PRELIM=0xF0000E55
CONFIG_SYS_BR1_PRELIM_BOOL=y
CONFIG_SYS_BR1_PRELIM=0xE8000801
CONFIG_SYS_OR1_PRELIM=0xF8000E25
CONFIG_SYS_BR3_PRELIM_BOOL=y
CONFIG_SYS_BR3_PRELIM=0xB0001001
CONFIG_SYS_OR3_PRELIM=0xF0000050
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_FSL=y
CONFIG_SYS_FSL_I2C_OFFSET=0x3000
CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
CONFIG_SYS_FSL_I2C2_OFFSET=0x3100
CONFIG_SYS_I2C_SLAVE=0x7F
CONFIG_SYS_I2C_SPEED=200000
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_FLASH_CFI_MTD=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_MTD_RAW_NAND=y
CONFIG_PHY_SMSC=y
CONFIG_PHY_FIXED=y
CONFIG_DM_ETH_PHY=y
CONFIG_QE_UEC=y
# CONFIG_PCI is not set
# CONFIG_PINCTRL_FULL is not set
CONFIG_QE=y
CONFIG_SYS_QE_FW_ADDR=0xF00C0000
CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_BCH=y

2
drivers/qe/qe.c
View File

@ -119,12 +119,10 @@ static void qe_sdma_init(void)
*/
static u8 thread_snum[] = {
/* Evthreads 16-29 are not supported in MPC8309 */
#if !defined(CONFIG_ARCH_MPC8309)
0x04, 0x05, 0x0c, 0x0d,
0x14, 0x15, 0x1c, 0x1d,
0x24, 0x25, 0x2c, 0x2d,
0x34, 0x35,
#endif
0x88, 0x89, 0x98, 0x99,
0xa8, 0xa9, 0xb8, 0xb9,
0xc8, 0xc9, 0xd8, 0xd9,

119
include/configs/km/km-mpc8309.h
View File

@ -1,119 +0,0 @@
/*
* High Level Configuration Options
*/
#define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0"
/* QE microcode/firmware address */
/* between the u-boot partition and env */
/*
* System IO Config
*/
/* 0x14000180 SICR_1 */
#ifndef CONFIG_SYS_SICRL
#define CONFIG_SYS_SICRL (0 \
| SICR_1_UART1_UART1RTS \
| SICR_1_I2C_CKSTOP \
| SICR_1_IRQ_A_IRQ \
| SICR_1_IRQ_B_IRQ \
| SICR_1_GPIO_A_GPIO \
| SICR_1_GPIO_B_GPIO \
| SICR_1_GPIO_C_GPIO \
| SICR_1_GPIO_D_GPIO \
| SICR_1_GPIO_E_GPIO \
| SICR_1_GPIO_F_GPIO \
| SICR_1_USB_A_UART2S \
| SICR_1_USB_B_UART2RTS \
| SICR_1_FEC1_FEC1 \
| SICR_1_FEC2_FEC2 \
)
#endif
/* 0x00080400 SICR_2 */
#define CONFIG_SYS_SICRH (0 \
| SICR_2_FEC3_FEC3 \
| SICR_2_HDLC1_A_HDLC1 \
| SICR_2_ELBC_A_LA \
| SICR_2_ELBC_B_LCLK \
| SICR_2_HDLC2_A_HDLC2 \
| SICR_2_USB_D_GPIO \
| SICR_2_PCI_PCI \
| SICR_2_HDLC1_B_HDLC1 \
| SICR_2_HDLC1_C_HDLC1 \
| SICR_2_HDLC2_B_GPIO \
| SICR_2_HDLC2_C_HDLC2 \
| SICR_2_QUIESCE_B \
)
/* GPR_1 */
#define CONFIG_SYS_GPR1 0x50008060
#define CONFIG_SYS_DDRCDR (\
DDRCDR_EN | \
DDRCDR_PZ_MAXZ | \
DDRCDR_NZ_MAXZ | \
DDRCDR_M_ODR)
#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f
#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \
SDRAM_CFG_32_BE | \
SDRAM_CFG_SREN | \
SDRAM_CFG_HSE)
#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000
#define CONFIG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
#define CONFIG_SYS_DDR_INTERVAL ((0x064 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
(0x200 << SDRAM_INTERVAL_REFINT_SHIFT))
#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \
CSCONFIG_ODT_RD_NEVER | \
CSCONFIG_ODT_WR_ONLY_CURRENT | \
CSCONFIG_ROW_BIT_13 | \
CSCONFIG_COL_BIT_10)
#define CONFIG_SYS_DDR_MODE 0x47860242
#define CONFIG_SYS_DDR_MODE2 0x8080c000
#define CONFIG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
(8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
(2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
(2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
(0 << TIMING_CFG0_WWT_SHIFT) | \
(0 << TIMING_CFG0_RRT_SHIFT) | \
(0 << TIMING_CFG0_WRT_SHIFT) | \
(0 << TIMING_CFG0_RWT_SHIFT))
#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_40) | \
(2 << TIMING_CFG1_WRTORD_SHIFT) | \
(2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
(3 << TIMING_CFG1_WRREC_SHIFT) | \
(7 << TIMING_CFG1_REFREC_SHIFT) | \
(3 << TIMING_CFG1_ACTTORW_SHIFT) | \
(7 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
(3 << TIMING_CFG1_PRETOACT_SHIFT))
#define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
(3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
(2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
(2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
(3 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
(0 << TIMING_CFG2_ADD_LAT_SHIFT) | \
(5 << TIMING_CFG2_CPO_SHIFT))
#define CONFIG_SYS_DDR_TIMING_3 0x00000000
#define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000
#define CONFIG_SYS_KMBEC_FPGA_SIZE 128
/* EEprom support */
/* ethernet port connected to piggy (UEC2) */
#define CONFIG_UEC_ETH2
#define CONFIG_SYS_UEC2_UCC_NUM 2 /* UCC3 */
#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE /* not used in RMII Mode */
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK12
#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 0
#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100

58
include/configs/kmtegr1.h
View File

@ -1,58 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2006 Freescale Semiconductor, Inc.
* Dave Liu <daveliu@freescale.com>
*
* Copyright (C) 2007 Logic Product Development, Inc.
* Peter Barada <peterb@logicpd.com>
*
* Copyright (C) 2007 MontaVista Software, Inc.
* Anton Vorontsov <avorontsov@ru.mvista.com>
*
* (C) Copyright 2010
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Configuration Options
*/
#define CONFIG_HOSTNAME "kmtegr1"
#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0"
#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1"
#define CONFIG_NAND_ECC_BCH
#define CONFIG_NAND_KMETER1
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_SICRL (0 \
| SICR_1_UART1_UART1RTS \
| SICR_1_I2C_CKSTOP \
| SICR_1_IRQ_A_IRQ \
| SICR_1_IRQ_B_IRQ \
| SICR_1_GPIO_A_GPIO \
| SICR_1_GPIO_B_GPIO \
| SICR_1_GPIO_C_GPIO \
| SICR_1_GPIO_D_GPIO \
| SICR_1_GPIO_E_LCS \
| SICR_1_GPIO_F_GPIO \
| SICR_1_USB_A_UART2S \
| SICR_1_USB_B_UART2RTS \
| SICR_1_FEC1_FEC1 \
| SICR_1_FEC2_FEC2 \
)
/* include common defines/options for all Keymile boards */
#include "km/keymile-common.h"
#include "km/km-powerpc.h"
#include "km/km-mpc83xx.h"
#include "km/km-mpc8309.h"
/* must be after the include because KMBEC_FPGA is otherwise undefined */
#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */
#endif /* __CONFIG_H */

2
include/linux/immap_qe.h
View File

@ -16,7 +16,7 @@
#define QE_MURAM_SIZE 0xc000UL
#define MAX_QE_RISC 2
#define QE_NUM_OF_SNUM 28
#elif defined(CONFIG_ARCH_MPC832X) || defined(CONFIG_ARCH_MPC8309)
#elif defined(CONFIG_ARCH_MPC832X)
#define QE_MURAM_SIZE 0x4000UL
#define MAX_QE_RISC 1
#define QE_NUM_OF_SNUM 28

151
include/mpc83xx.h
View File

@ -340,85 +340,6 @@
#define SICRH_TSOBI2_V3P3 (0 << 0)
#define SICRH_TSOBI2_V2P5 (1 << 0)
#elif defined(CONFIG_ARCH_MPC8309)
/* SICR_1 */
#define SICR_1_UART1_UART1S (0 << (30-2))
#define SICR_1_UART1_UART1RTS (1 << (30-2))
#define SICR_1_I2C_I2C (0 << (30-4))
#define SICR_1_I2C_CKSTOP (1 << (30-4))
#define SICR_1_IRQ_A_IRQ (0 << (30-6))
#define SICR_1_IRQ_A_MCP (1 << (30-6))
#define SICR_1_IRQ_B_IRQ (0 << (30-8))
#define SICR_1_IRQ_B_CKSTOP (1 << (30-8))
#define SICR_1_GPIO_A_GPIO (0 << (30-10))
#define SICR_1_GPIO_A_SD (2 << (30-10))
#define SICR_1_GPIO_A_DDR (3 << (30-10))
#define SICR_1_GPIO_B_GPIO (0 << (30-12))
#define SICR_1_GPIO_B_SD (2 << (30-12))
#define SICR_1_GPIO_B_QE (3 << (30-12))
#define SICR_1_GPIO_C_GPIO (0 << (30-14))
#define SICR_1_GPIO_C_CAN (1 << (30-14))
#define SICR_1_GPIO_C_DDR (2 << (30-14))
#define SICR_1_GPIO_C_LCS (3 << (30-14))
#define SICR_1_GPIO_D_GPIO (0 << (30-16))
#define SICR_1_GPIO_D_CAN (1 << (30-16))
#define SICR_1_GPIO_D_DDR (2 << (30-16))
#define SICR_1_GPIO_D_LCS (3 << (30-16))
#define SICR_1_GPIO_E_GPIO (0 << (30-18))
#define SICR_1_GPIO_E_CAN (1 << (30-18))
#define SICR_1_GPIO_E_DDR (2 << (30-18))
#define SICR_1_GPIO_E_LCS (3 << (30-18))
#define SICR_1_GPIO_F_GPIO (0 << (30-20))
#define SICR_1_GPIO_F_CAN (1 << (30-20))
#define SICR_1_GPIO_F_CK (2 << (30-20))
#define SICR_1_USB_A_USBDR (0 << (30-22))
#define SICR_1_USB_A_UART2S (1 << (30-22))
#define SICR_1_USB_B_USBDR (0 << (30-24))
#define SICR_1_USB_B_UART2S (1 << (30-24))
#define SICR_1_USB_B_UART2RTS (2 << (30-24))
#define SICR_1_USB_C_USBDR (0 << (30-26))
#define SICR_1_USB_C_QE_EXT (3 << (30-26))
#define SICR_1_FEC1_FEC1 (0 << (30-28))
#define SICR_1_FEC1_GTM (1 << (30-28))
#define SICR_1_FEC1_GPIO (2 << (30-28))
#define SICR_1_FEC2_FEC2 (0 << (30-30))
#define SICR_1_FEC2_GTM (1 << (30-30))
#define SICR_1_FEC2_GPIO (2 << (30-30))
/* SICR_2 */
#define SICR_2_FEC3_FEC3 (0 << (30-0))
#define SICR_2_FEC3_TMR (1 << (30-0))
#define SICR_2_FEC3_GPIO (2 << (30-0))
#define SICR_2_HDLC1_A_HDLC1 (0 << (30-2))
#define SICR_2_HDLC1_A_GPIO (1 << (30-2))
#define SICR_2_HDLC1_A_TDM1 (2 << (30-2))
#define SICR_2_ELBC_A_LA (0 << (30-4))
#define SICR_2_ELBC_B_LCLK (0 << (30-6))
#define SICR_2_HDLC2_A_HDLC2 (0 << (30-8))
#define SICR_2_HDLC2_A_GPIO (0 << (30-8))
#define SICR_2_HDLC2_A_TDM2 (0 << (30-8))
/* bits 10-11 unused */
#define SICR_2_USB_D_USBDR (0 << (30-12))
#define SICR_2_USB_D_GPIO (2 << (30-12))
#define SICR_2_USB_D_QE_BRG (3 << (30-12))
#define SICR_2_PCI_PCI (0 << (30-14))
#define SICR_2_PCI_CPCI_HS (2 << (30-14))
#define SICR_2_HDLC1_B_HDLC1 (0 << (30-16))
#define SICR_2_HDLC1_B_GPIO (1 << (30-16))
#define SICR_2_HDLC1_B_QE_BRG (2 << (30-16))
#define SICR_2_HDLC1_B_TDM1 (3 << (30-16))
#define SICR_2_HDLC1_C_HDLC1 (0 << (30-18))
#define SICR_2_HDLC1_C_GPIO (1 << (30-18))
#define SICR_2_HDLC1_C_TDM1 (2 << (30-18))
#define SICR_2_HDLC2_B_HDLC2 (0 << (30-20))
#define SICR_2_HDLC2_B_GPIO (1 << (30-20))
#define SICR_2_HDLC2_B_QE_BRG (2 << (30-20))
#define SICR_2_HDLC2_B_TDM2 (3 << (30-20))
#define SICR_2_HDLC2_C_HDLC2 (0 << (30-22))
#define SICR_2_HDLC2_C_GPIO (1 << (30-22))
#define SICR_2_HDLC2_C_TDM2 (2 << (30-22))
#define SICR_2_HDLC2_C_QE_BRG (3 << (30-22))
#define SICR_2_QUIESCE_B (0 << (30-24))
#endif
/*
@ -610,63 +531,6 @@
#define HRCWL_SVCOD_DIV_8 0x10000000
#define HRCWL_SVCOD_DIV_2 0x20000000
#define HRCWL_SVCOD_DIV_1 0x30000000
#elif defined(CONFIG_ARCH_MPC8309)
#define HRCWL_CEVCOD 0x000000C0
#define HRCWL_CEVCOD_SHIFT 6
/*
* According to Errata MPC8309RMAD, Rev. 0.2, 9/2012
* these are different than with 8360, 832x
*/
#define HRCWL_CE_PLL_VCO_DIV_2 0x00000000
#define HRCWL_CE_PLL_VCO_DIV_4 0x00000040
#define HRCWL_CE_PLL_VCO_DIV_8 0x00000080
#define HRCWL_CEPDF 0x00000020
#define HRCWL_CEPDF_SHIFT 5
#define HRCWL_CE_PLL_DIV_1X1 0x00000000
#define HRCWL_CE_PLL_DIV_2X1 0x00000020
#define HRCWL_CEPMF 0x0000001F
#define HRCWL_CEPMF_SHIFT 0
#define HRCWL_CE_TO_PLL_1X16_ 0x00000000
#define HRCWL_CE_TO_PLL_1X2 0x00000002
#define HRCWL_CE_TO_PLL_1X3 0x00000003
#define HRCWL_CE_TO_PLL_1X4 0x00000004
#define HRCWL_CE_TO_PLL_1X5 0x00000005
#define HRCWL_CE_TO_PLL_1X6 0x00000006
#define HRCWL_CE_TO_PLL_1X7 0x00000007
#define HRCWL_CE_TO_PLL_1X8 0x00000008
#define HRCWL_CE_TO_PLL_1X9 0x00000009
#define HRCWL_CE_TO_PLL_1X10 0x0000000A
#define HRCWL_CE_TO_PLL_1X11 0x0000000B
#define HRCWL_CE_TO_PLL_1X12 0x0000000C
#define HRCWL_CE_TO_PLL_1X13 0x0000000D
#define HRCWL_CE_TO_PLL_1X14 0x0000000E
#define HRCWL_CE_TO_PLL_1X15 0x0000000F
#define HRCWL_CE_TO_PLL_1X16 0x00000010
#define HRCWL_CE_TO_PLL_1X17 0x00000011
#define HRCWL_CE_TO_PLL_1X18 0x00000012
#define HRCWL_CE_TO_PLL_1X19 0x00000013
#define HRCWL_CE_TO_PLL_1X20 0x00000014
#define HRCWL_CE_TO_PLL_1X21 0x00000015
#define HRCWL_CE_TO_PLL_1X22 0x00000016
#define HRCWL_CE_TO_PLL_1X23 0x00000017
#define HRCWL_CE_TO_PLL_1X24 0x00000018
#define HRCWL_CE_TO_PLL_1X25 0x00000019
#define HRCWL_CE_TO_PLL_1X26 0x0000001A
#define HRCWL_CE_TO_PLL_1X27 0x0000001B
#define HRCWL_CE_TO_PLL_1X28 0x0000001C
#define HRCWL_CE_TO_PLL_1X29 0x0000001D
#define HRCWL_CE_TO_PLL_1X30 0x0000001E
#define HRCWL_CE_TO_PLL_1X31 0x0000001F
#define HRCWL_SVCOD 0x30000000
#define HRCWL_SVCOD_SHIFT 28
#define HRCWL_SVCOD_DIV_2 0x00000000
#define HRCWL_SVCOD_DIV_4 0x10000000
#define HRCWL_SVCOD_DIV_8 0x20000000
#define HRCWL_SVCOD_DIV_1 0x30000000
#endif
/*
@ -1027,21 +891,6 @@
#define SCCR_SATACM_1 0x00000055
#define SCCR_SATACM_2 0x000000aa
#define SCCR_SATACM_3 0x000000ff
#elif defined(CONFIG_ARCH_MPC8309)
/* SCCR bits - MPC8309 specific */
#define SCCR_SDHCCM 0x0c000000
#define SCCR_SDHCCM_SHIFT 26
#define SCCR_SDHCCM_0 0x00000000
#define SCCR_SDHCCM_1 0x04000000
#define SCCR_SDHCCM_2 0x08000000
#define SCCR_SDHCCM_3 0x0c000000
#define SCCR_USBDRCM 0x00c00000
#define SCCR_USBDRCM_SHIFT 22
#define SCCR_USBDRCM_0 0x00000000
#define SCCR_USBDRCM_1 0x00400000
#define SCCR_USBDRCM_2 0x00800000
#define SCCR_USBDRCM_3 0x00c00000
#endif
#define SCCR_PCIEXP1CM 0x00300000