leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

cpuat91: unbreak ethernet

Browse Source 
* the following problems are met :
config was set to use the new driver as a default but
- RMII was not enabled for the new driver
- the new driver didn't compile with RMII enabled
- the new driver initialize a PHY at address O when the PHY of
this board is at 1 thus we get "AT91 EMAC RMII: No PHY present"

* to fix these problems, this patch :
- enable RMII for the new driver
- fix the wrong define used in the at91_emac.c
- allow the config file to set a default phy address (and use
0 as a default as in the actual at91_emac.c driver)

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
This commit is contained in:
Eric Bénard 2010-06-21 09:40:43 +02:00 committed by Ben Warren
parent 409943a989
commit 836cd45358
2 changed files with 25 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

32
drivers/net/at91_emac.c
View File

@ -53,6 +53,10 @@
Please decrease the CONFIG_SYS_RX_ETH_BUFFER value
#endif
#ifndef CONFIG_DRIVER_AT91EMAC_PHYADDR
#define CONFIG_DRIVER_AT91EMAC_PHYADDR 0
#endif
/* MDIO clock must not exceed 2.5 MHz, so enable MCK divider */
#if (AT91C_MASTER_CLOCK > 80000000)
#define HCLK_DIV AT91_EMAC_CFG_MCLK_64
@ -198,12 +202,15 @@ static int at91emac_phy_reset(struct eth_device *netdev)
emac = (at91_emac_t *) netdev->iobase;
adv = ADVERTISE_CSMA | ADVERTISE_ALL;
at91emac_write(emac, 0, MII_ADVERTISE, adv);
at91emac_write(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
MII_ADVERTISE, adv);
VERBOSEP("%s: Starting autonegotiation...\n", netdev->name);
at91emac_write(emac, 0, MII_BMCR, (BMCR_ANENABLE | BMCR_ANRESTART));
at91emac_write(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMCR,
(BMCR_ANENABLE | BMCR_ANRESTART));
for (i = 0; i < 100000 / 100; i++) {
at91emac_read(emac, 0, MII_BMSR, &status);
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
MII_BMSR, &status);
if (status & BMSR_ANEGCOMPLETE)
break;
udelay(100);
@ -229,13 +236,15 @@ static int at91emac_phy_init(struct eth_device *netdev)
emac = (at91_emac_t *) netdev->iobase;
/* Check if the PHY is up to snuff... */
at91emac_read(emac, 0, MII_PHYSID1, &phy_id);
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
MII_PHYSID1, &phy_id);
if (phy_id == 0xffff) {
printf("%s: No PHY present\n", netdev->name);
return 1;
}
at91emac_read(emac, 0, MII_BMSR, &status);
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
MII_BMSR, &status);
if (!(status & BMSR_LSTATUS)) {
/* Try to re-negotiate if we don't have link already. */
@ -243,7 +252,8 @@ static int at91emac_phy_init(struct eth_device *netdev)
return 2;
for (i = 0; i < 100000 / 100; i++) {
at91emac_read(emac, 0, MII_BMSR, &status);
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
MII_BMSR, &status);
if (status & BMSR_LSTATUS)
break;
udelay(100);
@ -253,8 +263,10 @@ static int at91emac_phy_init(struct eth_device *netdev)
VERBOSEP("%s: link down\n", netdev->name);
return 3;
} else {
at91emac_read(emac, 0, MII_ADVERTISE, &adv);
at91emac_read(emac, 0, MII_LPA, &lpa);
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
MII_ADVERTISE, &adv);
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
MII_LPA, &lpa);
media = mii_nway_result(lpa & adv);
speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF)
? 1 : 0);
@ -271,7 +283,7 @@ int at91emac_UpdateLinkSpeed(at91_emac_t *emac)
{
unsigned short stat1;
at91emac_read(emac, 0, MII_BMSR, &stat1);
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMSR, &stat1);
if (!(stat1 & BMSR_LSTATUS)) /* link status up? */
return 1;
@ -364,7 +376,7 @@ static int at91emac_init(struct eth_device *netdev, bd_t *bd)
value = AT91_EMAC_CFG_CAF | AT91_EMAC_CFG_NBC |
HCLK_DIV;
#ifdef CONFIG_RMII
value |= AT91C_EMAC_RMII;
value |= AT91_EMAC_CFG_RMII;
#endif
writel(value, &emac->cfg);

9
include/configs/cpuat91.h
View File

@ -131,15 +131,12 @@
(CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 512 * 1024)
#define CONFIG_NET_MULTI 1
#ifdef CONFIG_NET_MULTI
#define CONFIG_DRIVER_AT91EMAC 1
#define CONFIG_SYS_RX_ETH_BUFFER 8
#else
#define CONFIG_DRIVER_ETHER 1
#endif
#define CONFIG_RMII 1
#define CONFIG_MII 1
#define CONFIG_DRIVER_AT91EMAC_PHYADDR 1
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_AT91C_USE_RMII 1
#define CONFIG_PHY_ADDRESS (1 << 5)
#define CONFIG_KS8721_PHY 1
#define CONFIG_SYS_FLASH_CFI 1