Changed MarelV38B board make target to lowercase. Config file cleanup.
This commit is contained in:
parent
d9831893ab
commit
82d9c9ec29
2
Makefile
2
Makefile
|
@ -412,7 +412,7 @@ icecube_5100_config: unconfig
|
|||
@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
|
||||
|
||||
v38b_config: unconfig
|
||||
@./mkconfig -a V38B ppc mpc5xxx v38b
|
||||
@./mkconfig -a v38b ppc mpc5xxx v38b
|
||||
|
||||
inka4x0_config: unconfig
|
||||
@$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
|
||||
|
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* (C) Copyright 2003-2004 Wolfgang Denk, DENX Software Engineering,
|
||||
* (C) Copyright 2003-2006 Wolfgang Denk, DENX Software Engineering,
|
||||
* wd@denx.de.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this project.
|
||||
|
@ -11,7 +11,7 @@
|
|||
*
|
||||
* This program is distributed in the hope that it will be useful, but WITHOUT
|
||||
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
||||
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
||||
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
||||
* for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
|
@ -22,51 +22,41 @@
|
|||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#if 0
|
||||
#define DEBUG 0xFFF
|
||||
#endif
|
||||
|
||||
#if 0
|
||||
#define DEBUG 0x01
|
||||
#endif
|
||||
|
||||
/*
|
||||
* High Level Configuration Options
|
||||
* (easy to change)
|
||||
*/
|
||||
*/
|
||||
#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
|
||||
#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */
|
||||
#define CONFIG_V38B 1 /* ...on V38B board */
|
||||
#define CFG_MPC5XXX_CLKIN 33000000 /* ...running at 33.000000MHz */
|
||||
|
||||
#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
|
||||
#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */
|
||||
#define CONFIG_V38B 1 /* ... on V38B board */
|
||||
#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
|
||||
#define CONFIG_RTC_PCF8563 1 /* has PCF8563 RTC */
|
||||
#define CONFIG_MPC5200_DDR 1 /* has DDR SDRAM */
|
||||
|
||||
#define CONFIG_RTC_PCF8563 1 /* has PCF8563 RTC */
|
||||
#define CONFIG_MPC5200_DDR 1 /* has DDR SDRAM */
|
||||
#define CONFIG_HW_WATCHDOG 1 /* has watchdog */
|
||||
#define CONFIG_HW_WATCHDOG 1 /* has watchdog */
|
||||
|
||||
#define CONFIG_NETCONSOLE 1
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_R 1 /* make flash read/write */
|
||||
#define CONFIG_BOARD_EARLY_INIT_R 1 /* do board-specific init */
|
||||
|
||||
#define CFG_XLB_PIPELINING 1 /* gives better performance */
|
||||
#define CFG_XLB_PIPELINING 1 /* gives better performance */
|
||||
|
||||
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||
|
||||
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||
|
||||
#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
|
||||
#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
||||
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Serial console configuration
|
||||
*/
|
||||
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
|
||||
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
|
||||
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
|
||||
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
|
||||
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
|
||||
|
||||
|
||||
/*
|
||||
* DDR
|
||||
*/
|
||||
|
@ -79,7 +69,6 @@
|
|||
#define SDRAM_CONFIG2 0x47770000
|
||||
#define SDRAM_TAPDELAY 0x10000000
|
||||
|
||||
|
||||
/*
|
||||
* PCI - no suport
|
||||
*/
|
||||
|
@ -96,13 +85,13 @@
|
|||
*/
|
||||
#define CONFIG_USB_OHCI
|
||||
#define CONFIG_USB_STORAGE
|
||||
|
||||
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
|
||||
#define CONFIG_USB_CLOCK 0x0001BBBB
|
||||
#define CONFIG_USB_CONFIG 0x00001000
|
||||
|
||||
/*
|
||||
* Supported commands
|
||||
*/
|
||||
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
|
||||
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
|
||||
CFG_CMD_FAT | \
|
||||
CFG_CMD_I2C | \
|
||||
CFG_CMD_IDE | \
|
||||
|
@ -112,53 +101,63 @@
|
|||
CFG_CMD_IRQ | \
|
||||
CFG_CMD_JFFS2 | \
|
||||
CFG_CMD_MII | \
|
||||
CFG_CMD_SDRAMi | \
|
||||
CFG_CMD_SDRAMi | \
|
||||
CFG_CMD_DATE | \
|
||||
CFG_CMD_USB | \
|
||||
CFG_CMD_FAT)
|
||||
|
||||
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
|
||||
|
||||
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
||||
#include <cmd_confdefs.h>
|
||||
|
||||
/*
|
||||
* Boot low with 16 MB Flash
|
||||
*/
|
||||
# define CFG_LOWBOOT 1
|
||||
# define CFG_LOWBOOT16 1
|
||||
#define CFG_LOWBOOT 1
|
||||
#define CFG_LOWBOOT16 1
|
||||
|
||||
/*
|
||||
* Autobooting
|
||||
*/
|
||||
#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
|
||||
|
||||
#define CONFIG_PREBOOT "echo;" \
|
||||
#define CONFIG_PREBOOT "echo;" \
|
||||
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
|
||||
"echo"
|
||||
|
||||
#undef CONFIG_BOOTARGS
|
||||
#undef CONFIG_BOOTARGS
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"netdev=eth0\0" \
|
||||
"devno=5\0" \
|
||||
"hostname=V38B_$(devno)\0" \
|
||||
"ipaddr=10.100.99.$(devno)\0" \
|
||||
"netmask=255.255.0.0\0" \
|
||||
"serverip=10.100.10.90\0" \
|
||||
"gatewayip=10.100.254.254\0" \
|
||||
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
||||
"rootpath=/opt/eldk/ppc_6xx\0" \
|
||||
"bootfile=mpc5200/uImage\0" \
|
||||
"bootcmd=run net_nfs\0" \
|
||||
"bootdelay=3\0" \
|
||||
"baudrate=115200\0" \
|
||||
"preboot=echo;echo Type \"run flash_nfs\" to mount root " \
|
||||
"filesystem over NFS; echo\0" \
|
||||
"netdev=eth0\0" \
|
||||
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
||||
"addip=setenv bootargs $(bootargs) " \
|
||||
"ip=$(ipaddr):$(serverip):$(gatewayip):" \
|
||||
"$(netmask):$(hostname):$(netdev):off panic=1\0" \
|
||||
"flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \
|
||||
"flash_self=run ramargs addip;bootm $(kernel_addr) " \
|
||||
"$(ramdisk_addr)\0" \
|
||||
"net_nfs=tftp 200000 $(bootfile);run nfsargs " \
|
||||
"addip;bootm\0" \
|
||||
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
|
||||
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=$(serverip):$(rootpath)\0" \
|
||||
"hostname=v38b\0" \
|
||||
"ethact=FEC ETHERNET\0" \
|
||||
"rootpath=/opt/eldk-3.1.1/ppc_6xx\0" \
|
||||
"update=prot off ff000000 ff03ffff; era ff000000 ff03ffff; " \
|
||||
"cp.b 200000 ff000000 $(filesize);" \
|
||||
"prot on ff000000 ff03ffff\0" \
|
||||
"load=tftp 200000 $(u-boot)\0" \
|
||||
"netmask=255.255.0.0\0" \
|
||||
"ipaddr=192.168.160.18\0" \
|
||||
"serverip=192.168.1.1\0" \
|
||||
"ethaddr=00:e0:ee:00:05:2e\0" \
|
||||
"bootfile=/tftpboot/v38b/uImage\0" \
|
||||
"u-boot=/tftpboot/v38b/u-boot.bin\0" \
|
||||
""
|
||||
|
||||
#define CONFIG_BOOTCOMMAND "run net_nfs"
|
||||
|
@ -169,13 +168,13 @@
|
|||
*/
|
||||
#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* I2C configuration
|
||||
*/
|
||||
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
|
||||
#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */
|
||||
|
||||
#define CFG_I2C_SPEED 100000 /* 100 kHz */
|
||||
#define CFG_I2C_SPEED 100000 /* 100 kHz */
|
||||
#define CFG_I2C_SLAVE 0x7F
|
||||
|
||||
/*
|
||||
|
@ -196,7 +195,7 @@
|
|||
*/
|
||||
#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
|
||||
#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
|
||||
#define CFG_FLASH_CFI_AMD_RESET 1
|
||||
#define CFG_FLASH_CFI_AMD_RESET 1
|
||||
#define CFG_FLASH_BASE 0xFF000000
|
||||
#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
|
||||
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
|
||||
|
@ -224,19 +223,18 @@
|
|||
#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
|
||||
#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */
|
||||
|
||||
|
||||
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
||||
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
||||
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
||||
|
||||
#define CFG_MONITOR_BASE TEXT_BASE
|
||||
#define CFG_MONITOR_BASE TEXT_BASE
|
||||
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
|
||||
# define CFG_RAMBOOT 1
|
||||
#endif
|
||||
|
||||
#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
|
||||
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
|
||||
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
||||
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256kB for Monitor */
|
||||
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128kB for malloc() */
|
||||
#define CFG_BOOTMAPSZ (8 << 20) /* Linux initial memory map */
|
||||
|
||||
/*
|
||||
* Ethernet configuration
|
||||
|
@ -253,19 +251,19 @@
|
|||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CFG_LONGHELP /* undef to save memory */
|
||||
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
||||
#define CFG_LONGHELP /* undef to save memory */
|
||||
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CFG_MAXARGS 16 /* max number of command args */
|
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
||||
#define CFG_MAXARGS 16 /* max number of command args */
|
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
||||
|
||||
#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
|
||||
#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
|
||||
#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
|
||||
|
||||
#define CFG_LOAD_ADDR 0x100000 /* default load address */
|
||||
|
||||
|
@ -274,14 +272,8 @@
|
|||
/*
|
||||
* Various low-level settings
|
||||
*/
|
||||
#if defined(CONFIG_MPC5200)
|
||||
#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
|
||||
#define CFG_HID0_FINAL HID0_ICE
|
||||
#else
|
||||
#define CFG_HID0_INIT 0
|
||||
#define CFG_HID0_FINAL 0
|
||||
#endif
|
||||
|
||||
|
||||
#define CFG_BOOTCS_START CFG_FLASH_BASE
|
||||
#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
|
||||
|
@ -294,55 +286,39 @@
|
|||
|
||||
#define CFG_RESET_ADDRESS 0xff000000
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* USB stuff
|
||||
*-----------------------------------------------------------------------
|
||||
/*
|
||||
* IDE/ATA (supports IDE harddisk)
|
||||
*/
|
||||
#define CONFIG_USB_CLOCK 0x0001BBBB
|
||||
#define CONFIG_USB_CONFIG 0x00001000
|
||||
#undef CONFIG_IDE_8xx_PCCARD /* Don't use IDE with PC Card Adapter */
|
||||
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
|
||||
#undef CONFIG_IDE_LED /* LED for ide not supported */
|
||||
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* IDE/ATA stuff Supports IDE harddisk
|
||||
*-----------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
#undef CONFIG_IDE_8xx_PCCARD /* Don't use IDE with PC Card Adapter */
|
||||
|
||||
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
|
||||
#undef CONFIG_IDE_LED /* LED for ide not supported */
|
||||
|
||||
#define CONFIG_IDE_RESET /* reset for ide supported */
|
||||
#define CONFIG_IDE_RESET /* reset for ide supported */
|
||||
#define CONFIG_IDE_PREINIT
|
||||
|
||||
#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
|
||||
#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
|
||||
#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
|
||||
#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
|
||||
|
||||
#define CFG_ATA_IDE0_OFFSET 0x0000
|
||||
|
||||
#define CFG_ATA_BASE_ADDR MPC5XXX_ATA
|
||||
|
||||
/* Offset for data I/O */
|
||||
#define CFG_ATA_DATA_OFFSET (0x0060)
|
||||
#define CFG_ATA_DATA_OFFSET (0x0060) /* data I/O offset */
|
||||
|
||||
/* Offset for normal register accesses */
|
||||
#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET)
|
||||
#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) /* normal register accesses offset */
|
||||
|
||||
/* Offset for alternate registers */
|
||||
#define CFG_ATA_ALT_OFFSET (0x005C)
|
||||
#define CFG_ATA_ALT_OFFSET (0x005C) /* alternate registers offset */
|
||||
|
||||
/* Interval between registers */
|
||||
#define CFG_ATA_STRIDE 4
|
||||
#define CFG_ATA_STRIDE 4 /* Interval between registers */
|
||||
|
||||
/* Status LED */
|
||||
|
||||
#define CONFIG_STATUS_LED /* Status LED enabled */
|
||||
#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
|
||||
|
||||
#define CFG_LED_BASE (0xf0000600 + 0x70) /* Timer 7 GPIO */
|
||||
/*
|
||||
* Status LED
|
||||
*/
|
||||
#define CONFIG_STATUS_LED /* Status LED enabled */
|
||||
#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
|
||||
|
||||
#define CFG_LED_BASE MPC5XXX_GPT7_ENABLE /* Timer 7 GPIO */
|
||||
#ifndef __ASSEMBLY__
|
||||
/* LEDs */
|
||||
typedef unsigned int led_id_t;
|
||||
|
||||
#define __led_toggle(_msk) \
|
||||
|
@ -359,10 +335,9 @@ typedef unsigned int led_id_t;
|
|||
} while(0)
|
||||
|
||||
#define __led_init(_msk, st) \
|
||||
{ \
|
||||
do { \
|
||||
*((volatile long *) (CFG_LED_BASE)) |= 0x34; \
|
||||
}
|
||||
|
||||
#endif
|
||||
} while(0)
|
||||
#endif /* __ASSEMBLY__ */
|
||||
|
||||
#endif /* __CONFIG_H */
|
Loading…
Reference in New Issue
Block a user