leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

spi: cadence_qspi: Add quad write support

Browse Source 
Use quad write if SPI_TX_QUAD flag is set.

Tested quad write on Stratix 10 SoC board (Micron
serial NOR flash, mt25qu02g)

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
This commit is contained in:
Ley Foon Tan 2019-02-27 13:36:14 +08:00 committed by Jagan Teki
parent 02f173ca15
commit 7eece32812
3 changed files with 8 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/spi/cadence_qspi.c
View File

@ -256,7 +256,7 @@ static int cadence_spi_xfer(struct udevice *dev, unsigned int bitlen,
break;
case CQSPI_INDIRECT_WRITE:
err = cadence_qspi_apb_indirect_write_setup
(plat, priv->cmd_len, cmd_buf);
(plat, priv->cmd_len, dm_plat->mode, cmd_buf);
if (!err) {
err = cadence_qspi_apb_indirect_write_execute
(plat, data_bytes, dout);

2
drivers/spi/cadence_qspi.h
View File

@ -60,7 +60,7 @@ int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat,
int cadence_qspi_apb_indirect_read_execute(struct cadence_spi_platdata *plat,
unsigned int rxlen, u8 *rxbuf);
int cadence_qspi_apb_indirect_write_setup(struct cadence_spi_platdata *plat,
unsigned int cmdlen, const u8 *cmdbuf);
unsigned int cmdlen, unsigned int tx_width, const u8 *cmdbuf);
int cadence_qspi_apb_indirect_write_execute(struct cadence_spi_platdata *plat,
unsigned int txlen, const u8 *txbuf);

7
drivers/spi/cadence_qspi_apb.c
View File

@ -77,6 +77,7 @@
#define CQSPI_REG_WR_INSTR 0x08
#define CQSPI_REG_WR_INSTR_OPCODE_LSB 0
#define CQSPI_REG_WR_INSTR_TYPE_DATA_LSB 16
#define CQSPI_REG_DELAY 0x0C
#define CQSPI_REG_DELAY_TSLCH_LSB 0
@ -686,7 +687,7 @@ failrd:
/* Opcode + Address (3/4 bytes) */
int cadence_qspi_apb_indirect_write_setup(struct cadence_spi_platdata *plat,
unsigned int cmdlen, const u8 *cmdbuf)
unsigned int cmdlen, unsigned int tx_width, const u8 *cmdbuf)
{
unsigned int reg;
unsigned int addr_bytes = cmdlen > 4 ? 4 : 3;
@ -702,6 +703,10 @@ int cadence_qspi_apb_indirect_write_setup(struct cadence_spi_platdata *plat,
/* Configure the opcode */
reg = cmdbuf[0] << CQSPI_REG_WR_INSTR_OPCODE_LSB;
if (tx_width & SPI_TX_QUAD)
reg |= CQSPI_INST_TYPE_QUAD << CQSPI_REG_WR_INSTR_TYPE_DATA_LSB;
writel(reg, plat->regbase + CQSPI_REG_WR_INSTR);
/* Setup write address. */