misc: Add gdsys_ioep driver
Add driver for the IHS IO endpoint on IHS FPGAs. Signed-off-by: Mario Six <mario.six@gdsys.cc>
This commit is contained in:
parent
004e67c216
commit
7e86242b2b
20
Documentation/devicetree/bindings/misc/gdsys,io-endpoint.txt
Normal file
20
Documentation/devicetree/bindings/misc/gdsys,io-endpoint.txt
Normal file
@ -0,0 +1,20 @@
|
||||
gdsys IO endpoint of IHS FPGA devices
|
||||
|
||||
The IO endpoint of IHS FPGA devices is a packet-based transmission interface
|
||||
that allows interconnected gdsys devices to send and receive data over the
|
||||
FPGA's main ethernet connection.
|
||||
|
||||
Required properties:
|
||||
- compatible: must be "gdsys,io-endpoint"
|
||||
- reg: describes the address and length of the endpoint's register map (within
|
||||
the FPGA's register space)
|
||||
|
||||
Example:
|
||||
|
||||
fpga0_ep0 {
|
||||
compatible = "gdsys,io-endpoint";
|
||||
reg = <0x020 0x10
|
||||
0x320 0x10
|
||||
0x340 0x10
|
||||
0x360 0x10>;
|
||||
};
|
@ -277,4 +277,10 @@ config GDSYS_RXAUI_CTRL
|
||||
depends on MISC
|
||||
help
|
||||
Support gdsys FPGA's RXAUI control.
|
||||
|
||||
config GDSYS_IOEP
|
||||
bool "Enable gdsys IOEP driver"
|
||||
depends on MISC
|
||||
help
|
||||
Support gdsys FPGA's IO endpoint driver.
|
||||
endmenu
|
||||
|
@ -53,4 +53,5 @@ obj-$(CONFIG_ROCKCHIP_EFUSE) += rockchip-efuse.o
|
||||
obj-$(CONFIG_STM32_RCC) += stm32_rcc.o
|
||||
obj-$(CONFIG_STM32MP_FUSE) += stm32mp_fuse.o
|
||||
obj-$(CONFIG_SYS_DPAA_QBMAN) += fsl_portals.o
|
||||
obj-$(CONFIG_GDSYS_IOEP) += gdsys_ioep.o
|
||||
obj-$(CONFIG_GDSYS_RXAUI_CTRL) += gdsys_rxaui_ctrl.o
|
||||
|
209
drivers/misc/gdsys_ioep.c
Normal file
209
drivers/misc/gdsys_ioep.c
Normal file
@ -0,0 +1,209 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* (C) Copyright 2017
|
||||
* Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
|
||||
*
|
||||
* based on the cmd_ioloop driver/command, which is
|
||||
*
|
||||
* (C) Copyright 2014
|
||||
* Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <dm.h>
|
||||
#include <misc.h>
|
||||
#include <regmap.h>
|
||||
|
||||
#include "gdsys_ioep.h"
|
||||
|
||||
/**
|
||||
* struct gdsys_ioep_priv - Private data structure for IOEP devices
|
||||
* @map: Register map to be used for the device
|
||||
* @state: Flag to keep the current status of the RX control (enabled/disabled)
|
||||
*/
|
||||
struct gdsys_ioep_priv {
|
||||
struct regmap *map;
|
||||
bool state;
|
||||
};
|
||||
|
||||
/**
|
||||
* enum last_spec - Convenience enum for read data sanity check
|
||||
* @READ_DATA_IS_LAST: The data to be read should be the final data of the
|
||||
* current packet
|
||||
* @READ_DATA_IS_NOT_LAST: The data to be read should not be the final data of
|
||||
* the current packet
|
||||
*/
|
||||
enum last_spec {
|
||||
READ_DATA_IS_LAST,
|
||||
READ_DATA_IS_NOT_LAST,
|
||||
};
|
||||
|
||||
static int gdsys_ioep_set_receive(struct udevice *dev, bool val)
|
||||
{
|
||||
struct gdsys_ioep_priv *priv = dev_get_priv(dev);
|
||||
u16 state;
|
||||
|
||||
priv->state = !priv->state;
|
||||
|
||||
if (val)
|
||||
state = CTRL_PROC_RECEIVE_ENABLE;
|
||||
else
|
||||
state = ~CTRL_PROC_RECEIVE_ENABLE;
|
||||
|
||||
gdsys_ioep_set(priv->map, tx_control, state);
|
||||
|
||||
if (val) {
|
||||
/* Set device address to dummy 1 */
|
||||
gdsys_ioep_set(priv->map, device_address, 1);
|
||||
}
|
||||
|
||||
return !priv->state;
|
||||
}
|
||||
|
||||
static int gdsys_ioep_send(struct udevice *dev, int offset,
|
||||
const void *buf, int size)
|
||||
{
|
||||
struct gdsys_ioep_priv *priv = dev_get_priv(dev);
|
||||
int k;
|
||||
u16 *p = (u16 *)buf;
|
||||
|
||||
for (k = 0; k < size; ++k)
|
||||
gdsys_ioep_set(priv->map, transmit_data, *(p++));
|
||||
|
||||
gdsys_ioep_set(priv->map, tx_control, CTRL_PROC_RECEIVE_ENABLE |
|
||||
CTRL_FLUSH_TRANSMIT_BUFFER);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* receive_byte_buffer() - Read data from a IOEP device
|
||||
* @dev: The IOEP device to read data from
|
||||
* @len: The length of the data to read
|
||||
* @buffer: The buffer to read the data into
|
||||
* @last_spec: Flag to indicate if the data to be read in this call should be
|
||||
* the final data of the current packet (i.e. it should be empty
|
||||
* after this read)
|
||||
*
|
||||
* Return: 0 if OK, -ve on error
|
||||
*/
|
||||
static int receive_byte_buffer(struct udevice *dev, uint len,
|
||||
u16 *buffer, enum last_spec last_spec)
|
||||
{
|
||||
struct gdsys_ioep_priv *priv = dev_get_priv(dev);
|
||||
int k;
|
||||
int ret = -EIO;
|
||||
|
||||
for (k = 0; k < len; ++k) {
|
||||
u16 rx_tx_status;
|
||||
|
||||
gdsys_ioep_get(priv->map, receive_data, buffer++);
|
||||
|
||||
gdsys_ioep_get(priv->map, rx_tx_status, &rx_tx_status);
|
||||
/*
|
||||
* Sanity check: If the data read should have been the last,
|
||||
* but wasn't, something is wrong
|
||||
*/
|
||||
if (k == (len - 1) && (last_spec == READ_DATA_IS_NOT_LAST ||
|
||||
rx_tx_status & STATE_RX_DATA_LAST))
|
||||
ret = 0;
|
||||
}
|
||||
|
||||
if (ret)
|
||||
debug("%s: Error while receiving bufer (err = %d)\n",
|
||||
dev->name, ret);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int gdsys_ioep_receive(struct udevice *dev, int offset, void *buf,
|
||||
int size)
|
||||
{
|
||||
int ret;
|
||||
struct io_generic_packet header;
|
||||
u16 *p = (u16 *)buf;
|
||||
const int header_words = sizeof(struct io_generic_packet) / sizeof(u16);
|
||||
uint len;
|
||||
|
||||
/* Read the packet header */
|
||||
ret = receive_byte_buffer(dev, header_words, p, READ_DATA_IS_NOT_LAST);
|
||||
if (ret) {
|
||||
debug("%s: Failed to read header data (err = %d)\n",
|
||||
dev->name, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
memcpy(&header, p, header_words * sizeof(u16));
|
||||
p += header_words;
|
||||
|
||||
/* Get payload data length */
|
||||
len = (header.packet_length + 1) / sizeof(u16);
|
||||
|
||||
/* Read the packet payload */
|
||||
ret = receive_byte_buffer(dev, len, p, READ_DATA_IS_LAST);
|
||||
if (ret) {
|
||||
debug("%s: Failed to read payload data (err = %d)\n",
|
||||
dev->name, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int gdsys_ioep_get_and_reset_status(struct udevice *dev, int msgid,
|
||||
void *tx_msg, int tx_size,
|
||||
void *rx_msg, int rx_size)
|
||||
{
|
||||
struct gdsys_ioep_priv *priv = dev_get_priv(dev);
|
||||
const u16 mask = STATE_RX_DIST_ERR | STATE_RX_LENGTH_ERR |
|
||||
STATE_RX_FRAME_CTR_ERR | STATE_RX_FCS_ERR |
|
||||
STATE_RX_PACKET_DROPPED | STATE_TX_ERR;
|
||||
u16 *status = rx_msg;
|
||||
|
||||
gdsys_ioep_get(priv->map, rx_tx_status, status);
|
||||
|
||||
gdsys_ioep_set(priv->map, rx_tx_status, *status);
|
||||
|
||||
return (*status & mask) ? 1 : 0;
|
||||
}
|
||||
|
||||
static const struct misc_ops gdsys_ioep_ops = {
|
||||
.set_enabled = gdsys_ioep_set_receive,
|
||||
.write = gdsys_ioep_send,
|
||||
.read = gdsys_ioep_receive,
|
||||
.call = gdsys_ioep_get_and_reset_status,
|
||||
};
|
||||
|
||||
static int gdsys_ioep_probe(struct udevice *dev)
|
||||
{
|
||||
struct gdsys_ioep_priv *priv = dev_get_priv(dev);
|
||||
int ret;
|
||||
|
||||
ret = regmap_init_mem(dev_ofnode(dev), &priv->map);
|
||||
if (ret) {
|
||||
debug("%s: Could not initialize regmap (err = %d)",
|
||||
dev->name, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
priv->state = false;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct udevice_id gdsys_ioep_ids[] = {
|
||||
{ .compatible = "gdsys,io-endpoint" },
|
||||
{ }
|
||||
};
|
||||
|
||||
U_BOOT_DRIVER(gdsys_ioep) = {
|
||||
.name = "gdsys_ioep",
|
||||
.id = UCLASS_MISC,
|
||||
.ops = &gdsys_ioep_ops,
|
||||
.flags = DM_UC_FLAG_SEQ_ALIAS,
|
||||
.of_match = gdsys_ioep_ids,
|
||||
.probe = gdsys_ioep_probe,
|
||||
.priv_auto_alloc_size = sizeof(struct gdsys_ioep_priv),
|
||||
};
|
137
drivers/misc/gdsys_ioep.h
Normal file
137
drivers/misc/gdsys_ioep.h
Normal file
@ -0,0 +1,137 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0+ */
|
||||
/*
|
||||
* (C) Copyright 2018
|
||||
* Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
|
||||
*/
|
||||
|
||||
#ifndef __GDSYS_IOEP_H_
|
||||
#define __GDSYS_IOEP_H_
|
||||
|
||||
/**
|
||||
* struct io_generic_packet - header structure for GDSYS IOEP packets
|
||||
* @target_address: Target protocol address of the packet.
|
||||
* @source_address: Source protocol address of the packet.
|
||||
* @packet_type: Packet type.
|
||||
* @bc: Block counter (filled in by FPGA).
|
||||
* @packet_length: Length of the packet's payload bytes.
|
||||
*/
|
||||
struct io_generic_packet {
|
||||
u16 target_address;
|
||||
u16 source_address;
|
||||
u8 packet_type;
|
||||
u8 bc;
|
||||
u16 packet_length;
|
||||
} __attribute__((__packed__));
|
||||
|
||||
/**
|
||||
* struct gdsys_ioep_regs - Registers of a IOEP device
|
||||
* @transmit_data: Register that receives data to be sent
|
||||
* @tx_control: TX control register
|
||||
* @receive_data: Register filled with the received data
|
||||
* @rx_tx_status: RX/TX status register
|
||||
* @device_address: Register for setting/reading the device's address
|
||||
* @target_address: Register for setting/reading the remote endpoint's address
|
||||
* @int_enable: Interrupt/Interrupt enable register
|
||||
*/
|
||||
struct gdsys_ioep_regs {
|
||||
u16 transmit_data;
|
||||
u16 tx_control;
|
||||
u16 receive_data;
|
||||
u16 rx_tx_status;
|
||||
u16 device_address;
|
||||
u16 target_address;
|
||||
u16 int_enable;
|
||||
};
|
||||
|
||||
/**
|
||||
* gdsys_ioep_set() - Convenience macro to write registers of a IOEP device
|
||||
* @map: Register map to write the value in
|
||||
* @member: Name of the member in the gdsys_ioep_regs structure to write
|
||||
* @val: Value to write to the register
|
||||
*/
|
||||
#define gdsys_ioep_set(map, member, val) \
|
||||
regmap_set(map, struct gdsys_ioep_regs, member, val)
|
||||
|
||||
/**
|
||||
* gdsys_ioep_get() - Convenience macro to read registers of a IOEP device
|
||||
* @map: Register map to read the value from
|
||||
* @member: Name of the member in the gdsys_ioep_regs structure to read
|
||||
* @valp: Pointer to buffer to read the register value into
|
||||
*/
|
||||
#define gdsys_ioep_get(map, member, valp) \
|
||||
regmap_get(map, struct gdsys_ioep_regs, member, valp)
|
||||
|
||||
/**
|
||||
* enum rx_tx_status_values - Enum to describe the fields of the rx_tx_status
|
||||
* register
|
||||
* @STATE_TX_PACKET_BUILDING: The device is currently building a packet
|
||||
* (and accepting data for it)
|
||||
* @STATE_TX_TRANSMITTING: A packet is currenly being transmitted
|
||||
* @STATE_TX_BUFFER_FULL: The TX buffer is full
|
||||
* @STATE_TX_ERR: A TX error occurred
|
||||
* @STATE_RECEIVE_TIMEOUT: A receive timeout occurred
|
||||
* @STATE_PROC_RX_STORE_TIMEOUT: A RX store timeout for a processor packet
|
||||
* occurred
|
||||
* @STATE_PROC_RX_RECEIVE_TIMEOUT: A RX receive timeout for a processor packet
|
||||
* occurred
|
||||
* @STATE_RX_DIST_ERR: A error occurred in the distribution block
|
||||
* @STATE_RX_LENGTH_ERR: A length invalid error occurred
|
||||
* @STATE_RX_FRAME_CTR_ERR: A frame count error occurred (two
|
||||
* non-increasing frame count numbers
|
||||
* encountered)
|
||||
* @STATE_RX_FCS_ERR: A CRC error occurred
|
||||
* @STATE_RX_PACKET_DROPPED: A RX packet has been dropped
|
||||
* @STATE_RX_DATA_LAST: The data to be read is the final data of the
|
||||
* current packet
|
||||
* @STATE_RX_DATA_FIRST: The data to be read is the first data of the
|
||||
* current packet
|
||||
* @STATE_RX_DATA_AVAILABLE: RX data is available to be read
|
||||
*/
|
||||
enum rx_tx_status_values {
|
||||
STATE_TX_PACKET_BUILDING = BIT(0),
|
||||
STATE_TX_TRANSMITTING = BIT(1),
|
||||
STATE_TX_BUFFER_FULL = BIT(2),
|
||||
STATE_TX_ERR = BIT(3),
|
||||
STATE_RECEIVE_TIMEOUT = BIT(4),
|
||||
STATE_PROC_RX_STORE_TIMEOUT = BIT(5),
|
||||
STATE_PROC_RX_RECEIVE_TIMEOUT = BIT(6),
|
||||
STATE_RX_DIST_ERR = BIT(7),
|
||||
STATE_RX_LENGTH_ERR = BIT(8),
|
||||
STATE_RX_FRAME_CTR_ERR = BIT(9),
|
||||
STATE_RX_FCS_ERR = BIT(10),
|
||||
STATE_RX_PACKET_DROPPED = BIT(11),
|
||||
STATE_RX_DATA_LAST = BIT(12),
|
||||
STATE_RX_DATA_FIRST = BIT(13),
|
||||
STATE_RX_DATA_AVAILABLE = BIT(15),
|
||||
};
|
||||
|
||||
/**
|
||||
* enum tx_control_values - Enum to describe the fields of the tx_control
|
||||
* register
|
||||
* @CTRL_PROC_RECEIVE_ENABLE: Enable packet reception for the processor
|
||||
* @CTRL_FLUSH_TRANSMIT_BUFFER: Flush the transmit buffer (and send packet data)
|
||||
*/
|
||||
enum tx_control_values {
|
||||
CTRL_PROC_RECEIVE_ENABLE = BIT(12),
|
||||
CTRL_FLUSH_TRANSMIT_BUFFER = BIT(15),
|
||||
};
|
||||
|
||||
/**
|
||||
* enum int_enable_values - Enum to describe the fields of the int_enable
|
||||
* register
|
||||
* @IRQ_CPU_TRANSMITBUFFER_FREE_STATUS: The transmit buffer is free (packet
|
||||
* data can be transmitted to the
|
||||
* device)
|
||||
* @IRQ_CPU_PACKET_TRANSMITTED_EVENT: A packet has been transmitted
|
||||
* @IRQ_NEW_CPU_PACKET_RECEIVED_EVENT: A new packet has been received
|
||||
* @IRQ_CPU_RECEIVE_DATA_AVAILABLE_STATUS: RX packet data are available to be
|
||||
* read
|
||||
*/
|
||||
enum int_enable_values {
|
||||
IRQ_CPU_TRANSMITBUFFER_FREE_STATUS = BIT(5),
|
||||
IRQ_CPU_PACKET_TRANSMITTED_EVENT = BIT(6),
|
||||
IRQ_NEW_CPU_PACKET_RECEIVED_EVENT = BIT(7),
|
||||
IRQ_CPU_RECEIVE_DATA_AVAILABLE_STATUS = BIT(8),
|
||||
};
|
||||
|
||||
#endif /* __GDSYS_IOEP_H_ */
|
Loading…
Reference in New Issue
Block a user