leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

* Make CPU clock on ICA-IP board controllable by a "cpuclk"

Browse Source 
environment variable which can set to "100", "133", or "150". The
  CPU clock will be configured accordingly upon next reboot. Other
  values are ignored. In case of an invalid or undefined "cpuclk"
  value, the compile-time default CPU clock speed will be used.

* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
  window that is used to access the UART registers by the Linux driver)

* Patch by Reinhard Meyer, 20 Dec 2003:
  Fix clock calculation for the MPC5200 for higher clock frequencies
  (above 2**32 / 10 = 429.5 MHz).
This commit is contained in:
wdenk 2003-12-27 19:24:54 +00:00
parent b2001f273f
commit 7cb22f97ee
10 changed files with 191 additions and 65 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
CHANGELOG
View File

@ -2,6 +2,21 @@
Changes since U-Boot 1.0.0:
======================================================================
* Make CPU clock on ICA-IP board controllable by a "cpuclk"
environment variable which can set to "100", "133", or "150". The
CPU clock will be configured accordingly upon next reboot. Other
values are ignored. In case of an invalid or undefined "cpuclk"
value, the compile-time default CPU clock speed will be used.
* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
window that is used to access the UART registers by the Linux driver)
* Patch by Reinhard Meyer, 20 Dec 2003:
Fix clock calculation for the MPC5200 for higher clock frequencies
(above 2**32 / 10 = 429.5 MHz).
* Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
* Fix IceCube CLKIN configuration (it's 33.000000MHz)
* Add new configuration for IceCube board with DDR memory

2
README
View File

@ -3110,7 +3110,7 @@ int main (int argc, char *argv[])
while (learning) {
Read the README file in the top level directory;
Read http://www.denx.de/re/DPLG.html
Read http://www.denx.de/twiki/bin/view/DULG/Manual ;
Read the source, Luke;
}

183
board/incaip/memsetup.S
View File

@ -55,63 +55,142 @@
#define CGU_MUXCR(value) 0x0014(value)
#define CGU_PLL1SR(value) 0x000C(value)
.set noreorder
/*
* void ebu_init(long)
*
* a0 has the clock value we are going to run at
*/
.globl ebu_init
.ent ebu_init
ebu_init:
li t1, EBU_MODUL_BASE
li t2, 0xA0000041
sw t2, EBU_ADDSEL0(t1)
li t2, 0xA0800041
sw t2, EBU_ADDSEL2(t1)
li t2, 0xBE0000F1
sw t2, EBU_ADDSEL1(t1)
li t3, 100000000
beq a0, t3, 1f
nop
li t3, 133000000
beq a0, t3, 2f
nop
li t3, 150000000
beq a0, t3, 2f
nop
b 3f
nop
/* 100 MHz */
1:
li t2, 0x8841417D
sw t2, EBU_BUSCON0(t1)
sw t2, EBU_BUSCON2(t1)
li t2, 0x684142BD
b 3f
sw t2, EBU_BUSCON1(t1) /* delay slot */
/* 133 or 150 MHz */
2:
li t2, 0x8841417E
sw t2, EBU_BUSCON0(t1)
sw t2, EBU_BUSCON2(t1)
li t2, 0x684143FD
sw t2, EBU_BUSCON1(t1)
3:
j ra
nop
.end ebu_init
/*
* void cgu_init(long)
*
* a0 has the clock value
*/
.globl cgu_init
.ent cgu_init
cgu_init:
li t1, CGU_MODUL_BASE
li t3, 100000000
beq a0, t3, 1f
nop
li t3, 133000000
beq a0, t3, 2f
nop
li t3, 150000000
beq a0, t3, 3f
nop
b 5f
nop
/* 100 MHz clock */
1:
li t2, 0x80000014
sw t2, CGU_DIVCR(t1)
li t2, 0x80000000
sw t2, CGU_MUXCR(t1)
li t2, 0x800B0001
b 5f
sw t2, CGU_PLL1CR(t1) /* delay slot */
/* 133 MHz clock */
2:
li t2, 0x80000054
sw t2, CGU_DIVCR(t1)
li t2, 0x80000000
sw t2, CGU_MUXCR(t1)
li t2, 0x800B0001
b 5f
sw t2, CGU_PLL1CR(t1) /* delay slot */
/* 150 MHz clock */
3:
li t2, 0x80000017
sw t2, CGU_DIVCR(t1)
li t2, 0xC00B0001
sw t2, CGU_PLL1CR(t1)
li t3, 0x80000000
4:
lw t2, CGU_PLL1SR(t1)
and t2, t2, t3
beq t2, zero, 4b
nop
li t2, 0x80000001
sw t2, CGU_MUXCR(t1)
5:
j ra
nop
.end cgu_init
.globl memsetup
.ent memsetup
memsetup:
/* EBU Initialization for the Flash CS0 and CS2.
/* EBU and CGU Initialization.
*/
li t0, EBU_MODUL_BASE
li a0, CPU_CLOCK_RATE
move t0, ra
li t1, 0xA0000041
sw t1, EBU_ADDSEL0(t0)
#if CPU_CLOCK_RATE==100000000 /* 100 MHz clock for the MIPS core */
lw t1, EBU_BUSCON0(t0) /* value set up by magic flash word */
sw t1, EBU_BUSCON2(t0)
#else /* 150 MHz or 133 MHz */
li t1, 0x8841417E
sw t1, EBU_BUSCON0(t0)
sw t1, EBU_BUSCON2(t0)
#endif
li t1, 0xA0800041
sw t1, EBU_ADDSEL2(t0)
/* Need to initialize CS1 too, so as to to prevent overlapping with
* Flash bank 1.
/* We rely on the fact that neither ebu_init() nor cgu_init()
* modify t0 and a0.
*/
li t1, 0xBE0000F1
sw t1, EBU_ADDSEL1(t0)
#if CPU_CLOCK_RATE==100000000 /* 100 MHz clock for the MIPS core */
li t1, 0x684142BD
#else /* 150 MHz or 133 MHz */
li t1, 0x684143FD
#endif
sw t1, EBU_BUSCON1(t0)
#if CPU_CLOCK_RATE==150000000 /* 150 MHz clock for the MIPS core */
li t0, CGU_MODUL_BASE
li t1, 0x80000017
sw t1, CGU_DIVCR(t0)
li t1, 0xC00B0001
sw t1, CGU_PLL1CR(t0)
lui t2, 0x8000
b1:
lw t1, CGU_PLL1SR(t0)
and t1, t1, t2
beq t1, zero, b1
li t1, 0x80000001
sw t1, CGU_MUXCR(t0)
#elif CPU_CLOCK_RATE==133000000 /* 133 MHz clock for the MIPS core */
li t0, CGU_MODUL_BASE
li t1, 0x80000054
sw t1, CGU_DIVCR(t0)
li t1, 0x80000000
sw t1, CGU_MUXCR(t0)
li t1, 0x800B0001
sw t1, CGU_PLL1CR(t0)
#endif
bal ebu_init
nop
bal cgu_init
nop
move ra, t0
/* SDRAM Initialization.
*/
@ -154,3 +233,5 @@ b1:
j ra
nop
.end memsetup

12
common/cmd_pcmcia.c
View File

@ -227,6 +227,18 @@ int pcmcia_on (void)
break;
}
#endif /* CONFIG_IDE_8xx_PCCARD */
#ifdef CONFIG_BMS2003
case 3: { /* map I/O window for 4xUART data/ctrl */
win->br += 0x140000;
win->or = ( PCMCIA_BSIZE_256K
| PCMCIA_PPS_8
| PCMCIA_PRS_IO
| slotbit
| PCMCIA_PV
| CFG_PCMCIA_TIMING );
break;
}
#endif /* CONFIG_BMS2003 */
default: /* set to not valid */
win->or = 0;
break;

15
cpu/mips/incaip_clock.c
View File

@ -102,3 +102,18 @@ uint incaip_get_fpiclk(void)
break;
}
}
int incaip_set_cpuclk(void)
{
uchar tmp[64];
ulong cpuclk;
if (getenv_r("cpuclk", tmp, sizeof(tmp)) > 0)
{
cpuclk = simple_strtoul(tmp, NULL, 10) * 1000000;
ebu_init(cpuclk);
cgu_init(cpuclk);
}
return 0;
}

10
cpu/mpc5xxx/speed.c
View File

@ -30,10 +30,10 @@
/* Bus-to-Core Multipliers */
static int bus2core[] = {
0, 0, 0, 10, 20, 20, 25, 45,
30, 55, 40, 50, 0, 60, 35, 0,
30, 25, 65, 10, 70, 20, 75, 45,
0, 55, 40, 50, 80, 60, 35, 0
3, 2, 2, 2, 4, 4, 5, 9,
6, 11, 8, 10, 3, 12, 7, 0,
6, 5, 13, 2, 14, 4, 15, 9,
0, 11, 8, 10, 16, 12, 7, 0
};
/* ------------------------------------------------------------------------- */
@ -62,7 +62,7 @@ int get_clocks (void)
} else {
gd->bus_clk = vco / 4;
}
gd->cpu_clk = gd->bus_clk * bus2core[val & 0x1f] / 10;
gd->cpu_clk = gd->bus_clk * bus2core[val & 0x1f] / 2;
val = *(vu_long *)MPC5XXX_CDM_CFG;
if (val & (1 << 8)) {

3
include/common.h
View File

@ -362,6 +362,9 @@ ulong get_HCLK (void);
ulong get_PCLK (void);
ulong get_UCLK (void);
#endif
#if defined CONFIG_INCA_IP
uint incaip_get_cpuclk (void);
#endif
ulong get_bus_freq (ulong);
#if defined(CONFIG_MPC85xx)

2
include/configs/Sandpoint8240.h
View File

@ -269,7 +269,7 @@
*/
#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 2
#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 1
#define CFG_ROMNAL 7 /*rom/flash next access time */
#define CFG_ROMFAL 11 /*rom/flash access time */

9
include/configs/incaip.h
View File

@ -36,12 +36,7 @@
#define CPU_CLOCK_RATE 133000000 /* 133 MHz clock for the MIPS core */
#endif
#if CPU_CLOCK_RATE == 100000000
#define INFINEON_EBU_BOOTCFG 0x20C4 /* CMULT = 4 for 100 MHz */
#else
#define INFINEON_EBU_BOOTCFG 0x40C4 /* CMULT = 8 for 150 MHz */
#endif
#define INFINEON_EBU_BOOTCFG 0x40C4 /* CMULT = 8 */
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
@ -106,7 +101,7 @@
#define CFG_BOOTPARAMS_LEN 128*1024
#define CFG_HZ (CPU_CLOCK_RATE/2)
#define CFG_HZ (incaip_get_cpuclk() / 2)
#define CFG_SDRAM_BASE 0x80000000

5
lib_mips/board.c
View File

@ -41,6 +41,8 @@
extern int timer_init(void);
extern int incaip_set_cpuclk(void);
extern ulong uboot_end_data;
extern ulong uboot_end;
@ -163,6 +165,9 @@ typedef int (init_fnc_t) (void);
init_fnc_t *init_sequence[] = {
timer_init,
env_init, /* initialize environment */
#ifdef CONFIG_INCA_IP
incaip_set_cpuclk, /* set cpu clock according to environment variable */
#endif
init_baudrate, /* initialze baudrate settings */
serial_init, /* serial communications setup */
console_init_f,