leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

rockchip: board: roc-pc-rk3399: Remove support for push button

Browse Source 
In case of a power interruption, human intervention is required which
is not desirable if the device is installed at a remote location. Drop
yellow LED as it is not much of use. Keep red LED(diy-led) as it is, to
indicate board in full power mode.

Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit is contained in:
Suniel Mahesh 2020-04-02 18:22:30 +05:30 committed by Kever Yang
parent d768a064a4
commit 79011f358f
1 changed files with 1 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
board/firefly/roc-pc-rk3399/roc-pc-rk3399.c
View File

@ -10,7 +10,6 @@
#include <spl_gpio.h>
#include <asm/io.h>
#include <asm/arch-rockchip/gpio.h>
#include <asm/arch-rockchip/grf_rk3399.h>
#ifndef CONFIG_SPL_BUILD
int board_early_init_f(void)
@ -34,26 +33,13 @@ out:
#if defined(CONFIG_TPL_BUILD)
#define PMUGRF_BASE 0xff320000
#define GPIO0_BASE 0xff720000
int board_early_init_f(void)
{
struct rockchip_gpio_regs * const gpio0 = (void *)GPIO0_BASE;
struct rk3399_pmugrf_regs * const pmugrf = (void *)PMUGRF_BASE;
/**
* 1. Glow yellow LED, termed as low power
* 2. Poll for on board power key press
* 3. Once 2 done, off yellow and glow red LED, termed as full power
* 4. Continue booting...
*/
spl_gpio_output(gpio0, GPIO(BANK_A, 2), 1);
spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_A, 5), GPIO_PULL_NORMAL);
while (readl(&gpio0->ext_port) & 0x20);
spl_gpio_output(gpio0, GPIO(BANK_A, 2), 0);
/* Turn on red LED, indicating full power mode */
spl_gpio_output(gpio0, GPIO(BANK_B, 5), 1);
return 0;