PXA: Remove "wepep250" board
This board is broken and impossible to repair without deep knowledge or availability of the hardware. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
This commit is contained in:
Marek Vasut
parent
75e203584a
commit
736947847d
@ -1,51 +0,0 @@
|
||||
#
|
||||
# (C) Copyright 2000-2006
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk
|
||||
|
||||
LIB = $(obj)lib$(BOARD).a
|
||||
|
||||
COBJS := wepep250.o flash.o
|
||||
SOBJS := lowlevel_init.o
|
||||
|
||||
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
SOBJS := $(addprefix $(obj),$(SOBJS))
|
||||
|
||||
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
|
||||
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
|
||||
|
||||
clean:
|
||||
rm -f $(SOBJS) $(OBJS)
|
||||
|
||||
distclean: clean
|
||||
rm -f $(LIB) core *.bak $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
|
||||
# defines $(obj).depend target
|
||||
include $(SRCTREE)/rules.mk
|
||||
|
||||
sinclude $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
@ -1,11 +0,0 @@
|
||||
#
|
||||
# This is config used for compilation of WEP EP250 sources
|
||||
#
|
||||
# You might change location of U-Boot in memory by setting right CONFIG_SYS_TEXT_BASE.
|
||||
# This allows for example having one copy located at the end of ram and stored
|
||||
# in flash device and later on while developing use other location to test
|
||||
# the code in RAM device only.
|
||||
#
|
||||
|
||||
CONFIG_SYS_TEXT_BASE = 0xa1fe0000
|
||||
#CONFIG_SYS_TEXT_BASE = 0xa1001000
|
||||
@ -1,324 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) 2003 ETC s.r.o.
|
||||
*
|
||||
* This code was inspired by Marius Groeger and Kyle Harris code
|
||||
* available in other board ports for U-Boot
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*
|
||||
* Written by Peter Figuli <peposh@etc.sk>, 2003.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include "intel.h"
|
||||
|
||||
|
||||
/*
|
||||
* This code should handle CFI FLASH memory device. This code is very
|
||||
* minimalistic approach without many essential error handling code as well.
|
||||
* Because U-Boot actually is missing smart handling of FLASH device,
|
||||
* we just set flash_id to anything else to FLASH_UNKNOW, so common code
|
||||
* can call us without any restrictions.
|
||||
* TODO: Add CFI Query, to be able to determine FLASH device.
|
||||
* TODO: Add error handling code
|
||||
* NOTE: This code was tested with BUS_WIDTH 4 and ITERLEAVE 2 only, but
|
||||
* hopefully may work with other configurations.
|
||||
*/
|
||||
|
||||
#if ( WEP_FLASH_BUS_WIDTH == 1 )
|
||||
# define FLASH_BUS vu_char
|
||||
# define FLASH_BUS_RET u_char
|
||||
# if ( WEP_FLASH_INTERLEAVE == 1 )
|
||||
# define FLASH_CMD( x ) x
|
||||
# else
|
||||
# error "With 8bit bus only one chip is allowed"
|
||||
# endif
|
||||
|
||||
|
||||
#elif ( WEP_FLASH_BUS_WIDTH == 2 )
|
||||
# define FLASH_BUS vu_short
|
||||
# define FLASH_BUS_RET u_short
|
||||
# if ( WEP_FLASH_INTERLEAVE == 1 )
|
||||
# define FLASH_CMD( x ) x
|
||||
# elif ( WEP_FLASH_INTERLEAVE == 2 )
|
||||
# define FLASH_CMD( x ) (( x << 8 )| x )
|
||||
# else
|
||||
# error "With 16bit bus only 1 or 2 chip(s) are allowed"
|
||||
# endif
|
||||
|
||||
|
||||
#elif ( WEP_FLASH_BUS_WIDTH == 4 )
|
||||
# define FLASH_BUS vu_long
|
||||
# define FLASH_BUS_RET u_long
|
||||
# if ( WEP_FLASH_INTERLEAVE == 1 )
|
||||
# define FLASH_CMD( x ) x
|
||||
# elif ( WEP_FLASH_INTERLEAVE == 2 )
|
||||
# define FLASH_CMD( x ) (( x << 16 )| x )
|
||||
# elif ( WEP_FLASH_INTERLEAVE == 4 )
|
||||
# define FLASH_CMD( x ) (( x << 24 )|( x << 16 ) ( x << 8 )| x )
|
||||
# else
|
||||
# error "With 32bit bus only 1,2 or 4 chip(s) are allowed"
|
||||
# endif
|
||||
|
||||
#else
|
||||
# error "Flash bus width might be 1,2,4 for 8,16,32 bit configuration"
|
||||
#endif
|
||||
|
||||
|
||||
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
|
||||
|
||||
static FLASH_BUS_RET flash_status_reg (void)
|
||||
{
|
||||
|
||||
FLASH_BUS *addr = (FLASH_BUS *) 0;
|
||||
|
||||
*addr = FLASH_CMD (CFI_INTEL_CMD_READ_STATUS_REGISTER);
|
||||
|
||||
return *addr;
|
||||
}
|
||||
|
||||
static int flash_ready (ulong timeout)
|
||||
{
|
||||
int ok = 1;
|
||||
|
||||
reset_timer_masked ();
|
||||
while ((flash_status_reg () & FLASH_CMD (CFI_INTEL_SR_READY)) !=
|
||||
FLASH_CMD (CFI_INTEL_SR_READY)) {
|
||||
if (get_timer_masked () > timeout && timeout != 0) {
|
||||
ok = 0;
|
||||
break;
|
||||
}
|
||||
}
|
||||
return ok;
|
||||
}
|
||||
|
||||
#if ( CONFIG_SYS_MAX_FLASH_BANKS != 1 )
|
||||
# error "WEP platform has only one flash bank!"
|
||||
#endif
|
||||
|
||||
|
||||
ulong flash_init (void)
|
||||
{
|
||||
int i;
|
||||
FLASH_BUS address = WEP_FLASH_BASE;
|
||||
|
||||
flash_info[0].size = WEP_FLASH_BANK_SIZE;
|
||||
flash_info[0].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
|
||||
flash_info[0].flash_id = INTEL_MANUFACT;
|
||||
memset (flash_info[0].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
|
||||
|
||||
for (i = 0; i < CONFIG_SYS_MAX_FLASH_SECT; i++) {
|
||||
flash_info[0].start[i] = address;
|
||||
#ifdef WEP_FLASH_UNLOCK
|
||||
/* Some devices are hw locked after start. */
|
||||
*((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_LOCK_SETUP);
|
||||
*((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_UNLOCK_BLOCK);
|
||||
flash_ready (0);
|
||||
*((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
|
||||
#endif
|
||||
address += WEP_FLASH_SECT_SIZE;
|
||||
}
|
||||
|
||||
flash_protect (FLAG_PROTECT_SET,
|
||||
CONFIG_SYS_FLASH_BASE,
|
||||
CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
|
||||
&flash_info[0]);
|
||||
|
||||
flash_protect (FLAG_PROTECT_SET,
|
||||
CONFIG_ENV_ADDR,
|
||||
CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
|
||||
|
||||
return WEP_FLASH_BANK_SIZE;
|
||||
}
|
||||
|
||||
void flash_print_info (flash_info_t * info)
|
||||
{
|
||||
int i;
|
||||
|
||||
printf (" Intel vendor\n");
|
||||
printf (" Size: %ld MB in %d Sectors\n",
|
||||
info->size >> 20, info->sector_count);
|
||||
|
||||
printf (" Sector Start Addresses:");
|
||||
for (i = 0; i < info->sector_count; i++) {
|
||||
if (!(i % 5)) {
|
||||
printf ("\n");
|
||||
}
|
||||
|
||||
printf (" %08lX%s", info->start[i],
|
||||
info->protect[i] ? " (RO)" : " ");
|
||||
}
|
||||
printf ("\n");
|
||||
}
|
||||
|
||||
|
||||
int flash_erase (flash_info_t * info, int s_first, int s_last)
|
||||
{
|
||||
int flag, non_protected = 0, sector;
|
||||
int rc = ERR_OK;
|
||||
|
||||
FLASH_BUS *address;
|
||||
|
||||
for (sector = s_first; sector <= s_last; sector++) {
|
||||
if (!info->protect[sector]) {
|
||||
non_protected++;
|
||||
}
|
||||
}
|
||||
|
||||
if (!non_protected) {
|
||||
return ERR_PROTECTED;
|
||||
}
|
||||
|
||||
/*
|
||||
* Disable interrupts which might cause a timeout
|
||||
* here. Remember that our exception vectors are
|
||||
* at address 0 in the flash, and we don't want a
|
||||
* (ticker) exception to happen while the flash
|
||||
* chip is in programming mode.
|
||||
*/
|
||||
flag = disable_interrupts ();
|
||||
|
||||
|
||||
/* Start erase on unprotected sectors */
|
||||
for (sector = s_first; sector <= s_last && !ctrlc (); sector++) {
|
||||
if (info->protect[sector]) {
|
||||
printf ("Protected sector %2d skipping...\n", sector);
|
||||
continue;
|
||||
} else {
|
||||
printf ("Erasing sector %2d ... ", sector);
|
||||
}
|
||||
|
||||
address = (FLASH_BUS *) (info->start[sector]);
|
||||
|
||||
*address = FLASH_CMD (CFI_INTEL_CMD_BLOCK_ERASE);
|
||||
*address = FLASH_CMD (CFI_INTEL_CMD_CONFIRM);
|
||||
if (flash_ready (CONFIG_SYS_FLASH_ERASE_TOUT)) {
|
||||
*address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER);
|
||||
printf ("ok.\n");
|
||||
} else {
|
||||
*address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND);
|
||||
rc = ERR_TIMOUT;
|
||||
printf ("timeout! Aborting...\n");
|
||||
break;
|
||||
}
|
||||
*address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
|
||||
}
|
||||
if (ctrlc ())
|
||||
printf ("User Interrupt!\n");
|
||||
|
||||
/* allow flash to settle - wait 10 ms */
|
||||
udelay_masked (10000);
|
||||
if (flag) {
|
||||
enable_interrupts ();
|
||||
}
|
||||
|
||||
return rc;
|
||||
}
|
||||
|
||||
static int write_data (flash_info_t * info, ulong dest, FLASH_BUS data)
|
||||
{
|
||||
FLASH_BUS *address = (FLASH_BUS *) dest;
|
||||
int rc = ERR_OK;
|
||||
int flag;
|
||||
|
||||
/* Check if Flash is (sufficiently) erased */
|
||||
if ((*address & data) != data) {
|
||||
return ERR_NOT_ERASED;
|
||||
}
|
||||
|
||||
/*
|
||||
* Disable interrupts which might cause a timeout
|
||||
* here. Remember that our exception vectors are
|
||||
* at address 0 in the flash, and we don't want a
|
||||
* (ticker) exception to happen while the flash
|
||||
* chip is in programming mode.
|
||||
*/
|
||||
|
||||
flag = disable_interrupts ();
|
||||
|
||||
*address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER);
|
||||
*address = FLASH_CMD (CFI_INTEL_CMD_PROGRAM1);
|
||||
*address = data;
|
||||
|
||||
if (!flash_ready (CONFIG_SYS_FLASH_WRITE_TOUT)) {
|
||||
*address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND);
|
||||
rc = ERR_TIMOUT;
|
||||
printf ("timeout! Aborting...\n");
|
||||
}
|
||||
|
||||
*address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
|
||||
if (flag) {
|
||||
enable_interrupts ();
|
||||
}
|
||||
|
||||
return rc;
|
||||
}
|
||||
|
||||
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
|
||||
{
|
||||
ulong read_addr, write_addr;
|
||||
FLASH_BUS data;
|
||||
int i, result = ERR_OK;
|
||||
|
||||
|
||||
read_addr = addr & ~(sizeof (FLASH_BUS) - 1);
|
||||
write_addr = read_addr;
|
||||
if (read_addr != addr) {
|
||||
data = 0;
|
||||
for (i = 0; i < sizeof (FLASH_BUS); i++) {
|
||||
if (read_addr < addr || cnt == 0) {
|
||||
data |= *((uchar *) read_addr) << i * 8;
|
||||
} else {
|
||||
data |= (*src++) << i * 8;
|
||||
cnt--;
|
||||
}
|
||||
read_addr++;
|
||||
}
|
||||
if ((result = write_data (info, write_addr, data)) != ERR_OK) {
|
||||
return result;
|
||||
}
|
||||
write_addr += sizeof (FLASH_BUS);
|
||||
}
|
||||
for (; cnt >= sizeof (FLASH_BUS); cnt -= sizeof (FLASH_BUS)) {
|
||||
if ((result = write_data (info, write_addr,
|
||||
*((FLASH_BUS *) src))) != ERR_OK) {
|
||||
return result;
|
||||
}
|
||||
write_addr += sizeof (FLASH_BUS);
|
||||
src += sizeof (FLASH_BUS);
|
||||
}
|
||||
if (cnt > 0) {
|
||||
read_addr = write_addr;
|
||||
data = 0;
|
||||
for (i = 0; i < sizeof (FLASH_BUS); i++) {
|
||||
if (cnt > 0) {
|
||||
data |= (*src++) << i * 8;
|
||||
cnt--;
|
||||
} else {
|
||||
data |= *((uchar *) read_addr) << i * 8;
|
||||
}
|
||||
read_addr++;
|
||||
}
|
||||
if ((result = write_data (info, write_addr, data)) != 0) {
|
||||
return result;
|
||||
}
|
||||
}
|
||||
return ERR_OK;
|
||||
}
|
||||
@ -1,99 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) 2002 ETC s.r.o.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the ETC s.r.o. nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* Written by Marcel Telka <marcel@telka.sk>, 2002.
|
||||
*
|
||||
* Documentation:
|
||||
* [1] Intel Corporation, "3 Volt Intel Strata Flash Memory 28F128J3A, 28F640J3A,
|
||||
* 28F320J3A (x8/x16)", April 2002, Order Number: 290667-011
|
||||
* [2] Intel Corporation, "3 Volt Synchronous Intel Strata Flash Memory 28F640K3, 28F640K18,
|
||||
* 28F128K3, 28F128K18, 28F256K3, 28F256K18 (x16)", June 2002, Order Number: 290737-005
|
||||
*
|
||||
* This file is taken from OpenWinCE project hosted by SourceForge.net
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef FLASH_INTEL_H
|
||||
#define FLASH_INTEL_H
|
||||
|
||||
#include <common.h>
|
||||
|
||||
/* Intel CFI commands - see Table 4. in [1] and Table 3. in [2] */
|
||||
|
||||
#define CFI_INTEL_CMD_READ_ARRAY 0xFF /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
|
||||
#define CFI_INTEL_CMD_READ_IDENTIFIER 0x90 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
|
||||
#define CFI_INTEL_CMD_READ_QUERY 0x98 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
|
||||
#define CFI_INTEL_CMD_READ_STATUS_REGISTER 0x70 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
|
||||
#define CFI_INTEL_CMD_CLEAR_STATUS_REGISTER 0x50 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
|
||||
#define CFI_INTEL_CMD_PROGRAM1 0x40 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
|
||||
#define CFI_INTEL_CMD_PROGRAM2 0x10 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
|
||||
#define CFI_INTEL_CMD_WRITE_TO_BUFFER 0xE8 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
|
||||
#define CFI_INTEL_CMD_CONFIRM 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
|
||||
#define CFI_INTEL_CMD_BLOCK_ERASE 0x20 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
|
||||
#define CFI_INTEL_CMD_SUSPEND 0xB0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
|
||||
#define CFI_INTEL_CMD_RESUME 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
|
||||
#define CFI_INTEL_CMD_LOCK_SETUP 0x60 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
|
||||
#define CFI_INTEL_CMD_LOCK_BLOCK 0x01 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
|
||||
#define CFI_INTEL_CMD_UNLOCK_BLOCK 0xD0 /* 28FxxxJ3A - unlocks all blocks, 28FFxxxK3, 28FxxxK18 */
|
||||
#define CFI_INTEL_CMD_LOCK_DOWN_BLOCK 0x2F /* 28FxxxK3, 28FxxxK18 */
|
||||
|
||||
/* Intel CFI Status Register bits - see Table 6. in [1] and Table 7. in [2] */
|
||||
|
||||
#define CFI_INTEL_SR_READY 1 << 7 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
|
||||
#define CFI_INTEL_SR_ERASE_SUSPEND 1 << 6 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
|
||||
#define CFI_INTEL_SR_ERASE_ERROR 1 << 5 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
|
||||
#define CFI_INTEL_SR_PROGRAM_ERROR 1 << 4 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
|
||||
#define CFI_INTEL_SR_VPEN_ERROR 1 << 3 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
|
||||
#define CFI_INTEL_SR_PROGRAM_SUSPEND 1 << 2 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
|
||||
#define CFI_INTEL_SR_BLOCK_LOCKED 1 << 1 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
|
||||
#define CFI_INTEL_SR_BEFP 1 << 0 /* 28FxxxK3, 28FxxxK18 */
|
||||
|
||||
/* Intel flash device ID codes for 28FxxxJ3A - see Table 5. in [1] */
|
||||
|
||||
#define CFI_CHIP_INTEL_28F320J3A 0x0016
|
||||
#define CFI_CHIPN_INTEL_28F320J3A "28F320J3A"
|
||||
#define CFI_CHIP_INTEL_28F640J3A 0x0017
|
||||
#define CFI_CHIPN_INTEL_28F640J3A "28F640J3A"
|
||||
#define CFI_CHIP_INTEL_28F128J3A 0x0018
|
||||
#define CFI_CHIPN_INTEL_28F128J3A "28F128J3A"
|
||||
|
||||
/* Intel flash device ID codes for 28FxxxK3 and 28FxxxK18 - see Table 8. in [2] */
|
||||
|
||||
#define CFI_CHIP_INTEL_28F640K3 0x8801
|
||||
#define CFI_CHIPN_INTEL_28F640K3 "28F640K3"
|
||||
#define CFI_CHIP_INTEL_28F128K3 0x8802
|
||||
#define CFI_CHIPN_INTEL_28F128K3 "28F128K3"
|
||||
#define CFI_CHIP_INTEL_28F256K3 0x8803
|
||||
#define CFI_CHIPN_INTEL_28F256K3 "28F256K3"
|
||||
#define CFI_CHIP_INTEL_28F640K18 0x8805
|
||||
#define CFI_CHIPN_INTEL_28F640K18 "28F640K18"
|
||||
#define CFI_CHIP_INTEL_28F128K18 0x8806
|
||||
#define CFI_CHIPN_INTEL_28F128K18 "28F128K18"
|
||||
#define CFI_CHIP_INTEL_28F256K18 0x8807
|
||||
#define CFI_CHIPN_INTEL_28F256K18 "28F256K18"
|
||||
|
||||
#endif /* FLASH_INTEL_H */
|
||||
@ -1,145 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) 2001, 2002 ETC s.r.o.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
|
||||
* 02111-1307, USA.
|
||||
*
|
||||
* Written by Marcel Telka <marcel@telka.sk>, 2001, 2002.
|
||||
* Changes for U-Boot Peter Figuli <peposh@etc.sk>, 2003.
|
||||
*
|
||||
* This file is taken from OpenWinCE project hosted by SourceForge.net
|
||||
*
|
||||
* Documentation:
|
||||
* [1] Intel Corporation, "Intel PXA250 and PXA210 Application Processors
|
||||
* Developer's Manual", February 2002, Order Number: 278522-001
|
||||
* [2] Samsung Electronics, "8Mx16 SDRAM 54CSP K4S281633D-RL/N/P",
|
||||
* Revision 1.0, February 2002
|
||||
* [3] Samsung Electronics, "16Mx16 SDRAM 54CSP K4S561633C-RL(N)",
|
||||
* Revision 1.0, February 2002
|
||||
*
|
||||
*/
|
||||
|
||||
#include <config.h>
|
||||
#include <version.h>
|
||||
#include <asm/arch/pxa-regs.h>
|
||||
|
||||
.globl lowlevel_init
|
||||
lowlevel_init:
|
||||
|
||||
mov r10, lr
|
||||
|
||||
/* setup memory - see 6.12 in [1]
|
||||
* Step 1 - wait 200 us
|
||||
*/
|
||||
mov r0,#0x2700 /* wait 200 us @ 99.5 MHz */
|
||||
1: subs r0, r0, #1
|
||||
bne 1b
|
||||
/* TODO: complete step 1 for Synchronous Static memory*/
|
||||
|
||||
ldr r0, =0x48000000 /* MC_BASE */
|
||||
|
||||
|
||||
/* step 1.a - setup MSCx
|
||||
*/
|
||||
ldr r1, =0x000012B3 /* MSC0_RRR0(1) | MSC0_RDN0(2) | MSC0_RDF0(11) | MSC0_RT0(3) */
|
||||
str r1, [r0, #0x8] /* MSC0_OFFSET */
|
||||
|
||||
/* step 1.c - clear MDREFR:K1FREE, set MDREFR:DRI
|
||||
* see AUTO REFRESH chapter in section D. in [2] and in [3]
|
||||
* DRI = (64ms / 4096) * 99.53MHz / 32 = 48 for K4S281633
|
||||
* DRI = (64ms / 8192) * 99.52MHz / 32 = 24 for K4S561633
|
||||
* TODO: complete for Synchronous Static memory
|
||||
*/
|
||||
ldr r1, [r0, #4] /* MDREFR_OFFSET */
|
||||
ldr r2, =0x01000FFF /* MDREFR_K1FREE | MDREFR_DRI_MASK */
|
||||
bic r1, r1, r2
|
||||
#if defined( WEP_SDRAM_K4S281633 )
|
||||
orr r1, r1, #48 /* MDREFR_DRI(48) */
|
||||
#elif defined( WEP_SDRAM_K4S561633 )
|
||||
orr r1, r1, #24 /* MDREFR_DRI(24) */
|
||||
#else
|
||||
#error SDRAM chip is not defined
|
||||
#endif
|
||||
|
||||
str r1, [r0, #4] /* MDREFR_OFFSET */
|
||||
|
||||
/* Step 2 - only for Synchronous Static memory (TODO)
|
||||
*
|
||||
* Step 3 - same as step 4
|
||||
*
|
||||
* Step 4
|
||||
*
|
||||
* Step 4.a - set MDREFR:K1RUN, clear MDREFR:K1DB2
|
||||
*/
|
||||
orr r1, r1, #0x00010000 /* MDREFR_K1RUN */
|
||||
bic r1, r1, #0x00020000 /* MDREFR_K1DB2 */
|
||||
str r1, [r0, #4] /* MDREFR_OFFSET */
|
||||
|
||||
/* Step 4.b - clear MDREFR:SLFRSH */
|
||||
bic r1, r1, #0x00400000 /* MDREFR_SLFRSH */
|
||||
str r1, [r0, #4] /* MDREFR_OFFSET */
|
||||
|
||||
/* Step 4.c - set MDREFR:E1PIN */
|
||||
orr r1, r1, #0x00008000 /* MDREFR_E1PIN */
|
||||
str r1, [r0, #4] /* MDREFR_OFFSET */
|
||||
|
||||
/* Step 4.d - automatically done
|
||||
*
|
||||
* Steps 4.e and 4.f - configure SDRAM
|
||||
*/
|
||||
#if defined( WEP_SDRAM_K4S281633 )
|
||||
ldr r1, =0x00000AA8 /* MDCNFG_DTC0(2) | MDCNFG_DLATCH0 | MDCNFG_DCAC0(1) | MDCNFG_DRAC0(1) | MDCNFG_DNB0 */
|
||||
#elif defined( WEP_SDRAM_K4S561633 )
|
||||
ldr r1, =0x00000AC8 /* MDCNFG_DTC0(2) | MDCNFG_DLATCH0 | MDCNFG_DCAC0(1) | MDCNFG_DRAC0(2) | MDCNFG_DNB0 */
|
||||
#else
|
||||
#error SDRAM chip is not defined
|
||||
#endif
|
||||
str r1, [r0, #0] /* MDCNFG_OFFSET */
|
||||
|
||||
/* Step 5 - wait at least 200 us for SDRAM
|
||||
* see section B. in [2]
|
||||
*/
|
||||
mov r2,#0x2700 /* wait 200 us @ 99.5 MHz */
|
||||
1: subs r2, r2, #1
|
||||
bne 1b
|
||||
|
||||
/* Step 6 - after reset dcache is disabled, so automatically done
|
||||
*
|
||||
* Step 7 - eight refresh cycles
|
||||
*/
|
||||
mov r2, #0xA0000000
|
||||
ldr r3, [r2]
|
||||
ldr r3, [r2]
|
||||
ldr r3, [r2]
|
||||
ldr r3, [r2]
|
||||
ldr r3, [r2]
|
||||
ldr r3, [r2]
|
||||
ldr r3, [r2]
|
||||
ldr r3, [r2]
|
||||
|
||||
/* Step 8 - we don't need dcache now
|
||||
*
|
||||
* Step 9 - enable SDRAM partition 0
|
||||
*/
|
||||
orr r1, r1, #1 /* MDCNFG_DE0 */
|
||||
str r1, [r0, #0] /* MDCNFG_OFFSET */
|
||||
|
||||
/* Step 10 - write MDMRS */
|
||||
mov r1, #0
|
||||
str r1, [r0, #0x40] /* MDMRS_OFFSET */
|
||||
|
||||
/* Step 11 - optional (TODO) */
|
||||
|
||||
mov pc,r10
|
||||
@ -1,68 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) 2003 ETC s.r.o.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*
|
||||
* Written by Peter Figuli <peposh@etc.sk>, 2003.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/arch/pxa-regs.h>
|
||||
#include <asm/io.h>
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
int board_init (void)
|
||||
{
|
||||
gd->bd->bi_arch_number = MACH_TYPE_WEP_EP250;
|
||||
gd->bd->bi_boot_params = 0xa0000000;
|
||||
/*
|
||||
* Setup GPIO stuff to get serial working
|
||||
*/
|
||||
#if defined( CONFIG_FFUART )
|
||||
writel(0x80, GPDR1);
|
||||
writel(0x8010, GAFR1_L);
|
||||
#elif defined( CONFIG_BTUART )
|
||||
writel(0x800, GPDR1);
|
||||
writel(0x900000, GAFR1_L);
|
||||
#endif
|
||||
writel(0x20, PSSR);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int dram_init (void)
|
||||
{
|
||||
#if ( CONFIG_NR_DRAM_BANKS > 0 )
|
||||
gd->bd->bi_dram[0].start = WEP_SDRAM_1;
|
||||
gd->bd->bi_dram[0].size = WEP_SDRAM_1_SIZE;
|
||||
#endif
|
||||
#if ( CONFIG_NR_DRAM_BANKS > 1 )
|
||||
gd->bd->bi_dram[1].start = WEP_SDRAM_2;
|
||||
gd->bd->bi_dram[1].size = WEP_SDRAM_2_SIZE;
|
||||
#endif
|
||||
#if ( CONFIG_NR_DRAM_BANKS > 2 )
|
||||
gd->bd->bi_dram[2].start = WEP_SDRAM_3;
|
||||
gd->bd->bi_dram[2].size = WEP_SDRAM_3_SIZE;
|
||||
#endif
|
||||
#if ( CONFIG_NR_DRAM_BANKS > 3 )
|
||||
gd->bd->bi_dram[3].start = WEP_SDRAM_4;
|
||||
gd->bd->bi_dram[3].size = WEP_SDRAM_4_SIZE;
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
@ -401,7 +401,6 @@ lpd7a400 arm lh7a40x lpd7a40x
|
||||
lpd7a404 arm lh7a40x lpd7a40x
|
||||
colibri_pxa270 arm pxa
|
||||
pxa255_idp arm pxa
|
||||
wepep250 arm pxa
|
||||
xsengine arm pxa
|
||||
zylonite arm pxa
|
||||
atngw100 avr32 at32ap - atmel at32ap700x
|
||||
|
||||
@ -1,199 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) 2003 ETC s.r.o.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*
|
||||
* Written by Peter Figuli <peposh@etc.sk>, 2003.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#define CONFIG_PXA250 1 /* this is an PXA250 CPU */
|
||||
#define CONFIG_WEPEP250 1 /* config for wepep250 board */
|
||||
#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */
|
||||
|
||||
/* we will never enable dcache, because we have to setup MMU first */
|
||||
#define CONFIG_SYS_NO_DCACHE
|
||||
|
||||
/*
|
||||
* Select serial console configuration
|
||||
*/
|
||||
#define CONFIG_PXA_SERIAL
|
||||
#define CONFIG_BTUART 1 /* BTUART is default on WEP dev board */
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#undef CONFIG_CMD_CONSOLE
|
||||
#undef CONFIG_CMD_LOADS
|
||||
#undef CONFIG_CMD_NET
|
||||
#undef CONFIG_CMD_SOURCE
|
||||
|
||||
|
||||
/*
|
||||
* Boot options. Setting delay to -1 stops autostart count down.
|
||||
* NOTE: Sending parameters to kernel depends on kernel version and
|
||||
* 2.4.19-rmk6-pxa1 patch used while my u-boot coding didn't accept
|
||||
* parameters at all! Do not get confused by them so.
|
||||
*/
|
||||
#define CONFIG_BOOTDELAY -1
|
||||
#define CONFIG_BOOTARGS "root=/dev/mtdblock2 mem=32m console=ttyS01,115200n8"
|
||||
#define CONFIG_BOOTCOMMAND "bootm 40000"
|
||||
|
||||
|
||||
/*
|
||||
* General options for u-boot. Modify to save memory foot print
|
||||
*/
|
||||
#define CONFIG_SYS_LONGHELP /* undef saves memory */
|
||||
#define CONFIG_SYS_PROMPT "WEP> " /* prompt string */
|
||||
#define CONFIG_SYS_CBSIZE 256 /* console I/O buffer */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size */
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max command args */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot args buf size */
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest test area */
|
||||
#define CONFIG_SYS_MEMTEST_END 0xa0800000
|
||||
|
||||
#define CONFIG_SYS_HZ 1000
|
||||
#define CONFIG_SYS_CPUSPEED 0x141 /* core clock - register value */
|
||||
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
||||
|
||||
/*
|
||||
* Definitions related to passing arguments to kernel.
|
||||
*/
|
||||
#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */
|
||||
#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */
|
||||
#undef CONFIG_INITRD_TAG /* do not send initrd params */
|
||||
#undef CONFIG_VFD /* do not send framebuffer setup */
|
||||
|
||||
|
||||
/*
|
||||
* Malloc pool need to host env + 128 Kb reserve for other allocations.
|
||||
*/
|
||||
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) )
|
||||
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
||||
|
||||
#define CONFIG_STACKSIZE (120<<10) /* stack size */
|
||||
|
||||
#ifdef CONFIG_USE_IRQ
|
||||
#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */
|
||||
#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* SDRAM Memory Map
|
||||
*/
|
||||
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */
|
||||
#define WEP_SDRAM_1 0xa0000000 /* SDRAM bank #1 */
|
||||
#define WEP_SDRAM_1_SIZE 0x02000000 /* 32 MB ( 2 chip ) */
|
||||
#define WEP_SDRAM_2 0xa2000000 /* SDRAM bank #2 */
|
||||
#define WEP_SDRAM_2_SIZE 0x00000000 /* 0 MB */
|
||||
#define WEP_SDRAM_3 0xa8000000 /* SDRAM bank #3 */
|
||||
#define WEP_SDRAM_3_SIZE 0x00000000 /* 0 MB */
|
||||
#define WEP_SDRAM_4 0xac000000 /* SDRAM bank #4 */
|
||||
#define WEP_SDRAM_4_SIZE 0x00000000 /* 0 MB */
|
||||
|
||||
#define CONFIG_SYS_DRAM_BASE 0xa0000000
|
||||
#define CONFIG_SYS_DRAM_SIZE 0x02000000
|
||||
|
||||
/* Uncomment used SDRAM chip */
|
||||
#define WEP_SDRAM_K4S281633
|
||||
/*#define WEP_SDRAM_K4S561633*/
|
||||
|
||||
|
||||
/*
|
||||
* Configuration for FLASH memory
|
||||
*/
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* number of sector in FLASH bank */
|
||||
#define WEP_FLASH_BUS_WIDTH 4 /* we use 32 bit FLASH memory... */
|
||||
#define WEP_FLASH_INTERLEAVE 2 /* ... made of 2 chips */
|
||||
#define WEP_FLASH_BANK_SIZE 0x2000000 /* size of one flash bank*/
|
||||
#define WEP_FLASH_SECT_SIZE 0x0040000 /* size of erase sector */
|
||||
#define WEP_FLASH_BASE 0x0000000 /* location of flash memory */
|
||||
#define WEP_FLASH_UNLOCK 1 /* perform hw unlock first */
|
||||
|
||||
|
||||
/* This should be defined if CFI FLASH device is present. Actually benefit
|
||||
is not so clear to me. In other words we can provide more informations
|
||||
to user, but this expects more complex flash handling we do not provide
|
||||
now.*/
|
||||
#undef CONFIG_SYS_FLASH_CFI
|
||||
|
||||
#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Erase operation */
|
||||
#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Write operation */
|
||||
|
||||
#define CONFIG_SYS_FLASH_BASE WEP_FLASH_BASE
|
||||
|
||||
/*
|
||||
* This is setting for JFFS2 support in u-boot.
|
||||
* Right now there is no gain for user, but later on booting kernel might be
|
||||
* possible. Consider using XIP kernel running from flash to save RAM
|
||||
* footprint.
|
||||
* NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
|
||||
*/
|
||||
#define CONFIG_SYS_JFFS2_FIRST_BANK 0
|
||||
#define CONFIG_SYS_JFFS2_FIRST_SECTOR 5
|
||||
#define CONFIG_SYS_JFFS2_NUM_BANKS 1
|
||||
|
||||
/*
|
||||
* Environment setup. Definitions of monitor location and size with
|
||||
* definition of environment setup ends up in 2 possibilities.
|
||||
* 1. Embeded environment - in u-boot code is space for environment
|
||||
* 2. Environment is read from predefined sector of flash
|
||||
* Right now we support 2. possiblity, but expecting no env placed
|
||||
* on mentioned address right now. This also needs to provide whole
|
||||
* sector for it - for us 256Kb is really waste of memory. U-boot uses
|
||||
* default env. and until kernel parameters could be sent to kernel
|
||||
* env. has no sense to us.
|
||||
*/
|
||||
|
||||
#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
|
||||
#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128kb ( 1 flash sector ) */
|
||||
#define CONFIG_ENV_IS_IN_FLASH 1
|
||||
#define CONFIG_ENV_ADDR 0x20000 /* absolute address for now */
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
|
||||
#define PHYS_SDRAM_1 WEP_SDRAM_1
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
||||
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1)
|
||||
|
||||
#undef CONFIG_ENV_OVERWRITE /* env is not writable now */
|
||||
|
||||
/*
|
||||
* Well this has to be defined, but on the other hand it is used differently
|
||||
* one may expect. For instance loadb command do not cares :-)
|
||||
* So advice is - do not relay on this...
|
||||
*/
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x40000
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
Loading…
Reference in New Issue
Block a user