From 6bed24cc62ecd8d7a96c34cf1cf3e5e093f7be62 Mon Sep 17 00:00:00 2001 From: Paul Kocialkowski Date: Tue, 4 Aug 2015 17:04:08 +0200 Subject: [PATCH] sunxi: usb: USB_MUSB_SUNXI move to musb-new Kconfig Now that the musb-new driver has a Kconfig, we can move Kconfig options to enable controllers to it, so that it's easier in e.g. menuconfig. In addition, this allows declaring support for USB_MUSB_HOST/GADGET in defconfigs instead of the USB_MUSB_SUNXI controller, that will get selected automatically when needed. Signed-off-by: Paul Kocialkowski --- board/sunxi/Kconfig | 9 --------- configs/Ainol_AW1_defconfig | 2 +- configs/Ampe_A76_defconfig | 2 +- configs/CSQ_CS908_defconfig | 2 +- configs/Chuwi_V7_CW0825_defconfig | 2 +- configs/Et_q8_v1_6_defconfig | 2 +- configs/Hyundai_A7HD_defconfig | 2 +- configs/Ippo_q8h_v1_2_a33_1024x600_defconfig | 2 +- configs/Ippo_q8h_v1_2_defconfig | 2 +- configs/Ippo_q8h_v5_defconfig | 2 +- configs/MSI_Primo81_defconfig | 2 +- configs/Mele_A1000G_quad_defconfig | 2 +- configs/Mini-X_defconfig | 2 +- configs/TZX-Q8-713B7_defconfig | 2 +- configs/UTOO_P66_defconfig | 2 +- configs/Yones_Toptech_BD1078_defconfig | 2 +- configs/ba10_tv_box_defconfig | 2 +- configs/forfun_q88db_defconfig | 2 +- configs/ga10h_v1_1_defconfig | 2 +- configs/iNet_3F_defconfig | 2 +- configs/iNet_3W_defconfig | 2 +- configs/iNet_86VS_defconfig | 2 +- drivers/usb/musb-new/Kconfig | 14 ++++++++++++++ 23 files changed, 35 insertions(+), 30 deletions(-) diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 441c880813..e1c5e1df40 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -539,15 +539,6 @@ config VIDEO_LCD_TL059WV5C0 endchoice -config USB_MUSB_SUNXI - bool "Enable sunxi OTG / DRC USB controller in host mode" - default n - ---help--- - Say y here to enable support for the sunxi OTG / DRC USB controller - used on almost all sunxi boards. Note currently u-boot can only have - one usb host controller enabled at a time, so enabling this on boards - which also use the ehci host controller will result in build errors. - config USB_KEYBOARD boolean "Enable USB keyboard support" default y diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig index e1262e67ea..ff7abfad8f 100644 --- a/configs/Ainol_AW1_defconfig +++ b/configs/Ainol_AW1_defconfig @@ -11,7 +11,7 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:40000,le:87,ri:112,up:38,lo CONFIG_VIDEO_LCD_POWER="PH8" CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" -CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_MUSB_HOST=y CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-ainol-aw1" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig index 2ee0307c0c..1d36919ca5 100644 --- a/configs/Ampe_A76_defconfig +++ b/configs/Ampe_A76_defconfig @@ -10,7 +10,7 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:82,up:22,lo: CONFIG_VIDEO_LCD_POWER="AXP0-0" CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" -CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_MUSB_HOST=y CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-ampe-a76" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig index fe88a7b29f..7c8eca883a 100644 --- a/configs/CSQ_CS908_defconfig +++ b/configs/CSQ_CS908_defconfig @@ -15,4 +15,4 @@ CONFIG_ETH_DESIGNWARE=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3300 CONFIG_USB_EHCI_HCD=y -CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_MUSB_HOST=y diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig index cb659c902c..4011351595 100644 --- a/configs/Chuwi_V7_CW0825_defconfig +++ b/configs/Chuwi_V7_CW0825_defconfig @@ -10,7 +10,7 @@ CONFIG_VIDEO_LCD_POWER="PH8" CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM=y -CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_MUSB_HOST=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-chuwi-v7-cw0825" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y diff --git a/configs/Et_q8_v1_6_defconfig b/configs/Et_q8_v1_6_defconfig index 278334710f..ca8db19f5c 100644 --- a/configs/Et_q8_v1_6_defconfig +++ b/configs/Et_q8_v1_6_defconfig @@ -11,7 +11,7 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0 CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" -CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_MUSB_HOST=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-et-q8-v1.6" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig index 06fdd2a62a..065a3f9a45 100644 --- a/configs/Hyundai_A7HD_defconfig +++ b/configs/Hyundai_A7HD_defconfig @@ -12,7 +12,7 @@ CONFIG_VIDEO_LCD_BL_EN="PH9" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set CONFIG_VIDEO_LCD_PANEL_LVDS=y -CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_MUSB_HOST=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-hyundai-a7hd" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y diff --git a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig b/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig index fda7683a7b..213de5a4cf 100644 --- a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig +++ b/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig @@ -12,7 +12,7 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0 CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" -CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_MUSB_HOST=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y diff --git a/configs/Ippo_q8h_v1_2_defconfig b/configs/Ippo_q8h_v1_2_defconfig index 490cbe2be8..ff5ec30935 100644 --- a/configs/Ippo_q8h_v1_2_defconfig +++ b/configs/Ippo_q8h_v1_2_defconfig @@ -12,7 +12,7 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0 CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" -CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_MUSB_HOST=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v1.2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y diff --git a/configs/Ippo_q8h_v5_defconfig b/configs/Ippo_q8h_v5_defconfig index aa1eb691e7..b67206c3eb 100644 --- a/configs/Ippo_q8h_v5_defconfig +++ b/configs/Ippo_q8h_v5_defconfig @@ -12,7 +12,7 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0 CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" -CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_MUSB_HOST=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig index b3b21cbd46..b089e97ab6 100644 --- a/configs/MSI_Primo81_defconfig +++ b/configs/MSI_Primo81_defconfig @@ -10,7 +10,7 @@ CONFIG_VIDEO_LCD_MODE="x:768,y:1024,depth:18,pclk_khz:66000,le:56,ri:60,up:30,lo CONFIG_VIDEO_LCD_BL_EN="PA25" CONFIG_VIDEO_LCD_BL_PWM="PH13" CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y -CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_MUSB_HOST=y # CONFIG_USB_KEYBOARD is not set CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-primo81" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig index ffc8d9b7bd..5e31ef61c7 100644 --- a/configs/Mele_A1000G_quad_defconfig +++ b/configs/Mele_A1000G_quad_defconfig @@ -17,4 +17,4 @@ CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_DLDO4_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3300 CONFIG_USB_EHCI_HCD=y -CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_MUSB_HOST=y diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig index c721c87742..00b6c63b82 100644 --- a/configs/Mini-X_defconfig +++ b/configs/Mini-X_defconfig @@ -9,5 +9,5 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_USB_EHCI_HCD=y -CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_MUSB_HOST=y CONFIG_USB0_VBUS_PIN="PB9" diff --git a/configs/TZX-Q8-713B7_defconfig b/configs/TZX-Q8-713B7_defconfig index 6a716bd1a8..3508834749 100644 --- a/configs/TZX-Q8-713B7_defconfig +++ b/configs/TZX-Q8-713B7_defconfig @@ -10,7 +10,7 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:40,up:31,lo: CONFIG_VIDEO_LCD_POWER="AXP0-0" CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" -CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_MUSB_HOST=y CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-tzx-q8-713b7" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y diff --git a/configs/UTOO_P66_defconfig b/configs/UTOO_P66_defconfig index d59a0448eb..0266299f71 100644 --- a/configs/UTOO_P66_defconfig +++ b/configs/UTOO_P66_defconfig @@ -15,7 +15,7 @@ CONFIG_VIDEO_LCD_RESET="PG11" CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_TL059WV5C0=y -CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_MUSB_HOST=y CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-utoo-p66" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y diff --git a/configs/Yones_Toptech_BD1078_defconfig b/configs/Yones_Toptech_BD1078_defconfig index 22b51a2595..27f2e2bb4e 100644 --- a/configs/Yones_Toptech_BD1078_defconfig +++ b/configs/Yones_Toptech_BD1078_defconfig @@ -16,7 +16,7 @@ CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set CONFIG_VIDEO_LCD_PANEL_LVDS=y -CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_MUSB_HOST=y CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-yones-toptech-bd1078" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig index ae302c544e..5b5fc122f7 100644 --- a/configs/ba10_tv_box_defconfig +++ b/configs/ba10_tv_box_defconfig @@ -12,5 +12,5 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_USB_EHCI_HCD=y -CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_MUSB_HOST=y CONFIG_USB0_VBUS_PIN="PB9" diff --git a/configs/forfun_q88db_defconfig b/configs/forfun_q88db_defconfig index 8f10c25b16..6fff7255ed 100644 --- a/configs/forfun_q88db_defconfig +++ b/configs/forfun_q88db_defconfig @@ -9,7 +9,7 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:40,up:31,lo: CONFIG_VIDEO_LCD_POWER="AXP0-0" CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" -CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_MUSB_HOST=y CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-forfun-q88db" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig index e766db4f6f..098284db69 100644 --- a/configs/ga10h_v1_1_defconfig +++ b/configs/ga10h_v1_1_defconfig @@ -14,7 +14,7 @@ CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" CONFIG_VIDEO_LCD_PANEL_LVDS=y -CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_MUSB_HOST=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ga10h-v1.1" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y diff --git a/configs/iNet_3F_defconfig b/configs/iNet_3F_defconfig index c4611cff4c..22d0caf8f7 100644 --- a/configs/iNet_3F_defconfig +++ b/configs/iNet_3F_defconfig @@ -11,7 +11,7 @@ CONFIG_VIDEO_LCD_POWER="PH8" CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_PANEL_LVDS=y -CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_MUSB_HOST=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3f" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y diff --git a/configs/iNet_3W_defconfig b/configs/iNet_3W_defconfig index d75eb21860..c296c0c5d4 100644 --- a/configs/iNet_3W_defconfig +++ b/configs/iNet_3W_defconfig @@ -11,7 +11,7 @@ CONFIG_VIDEO_LCD_MODE="x:1024,y:768,depth:24,pclk_khz:65000,le:159,ri:160,up:22, CONFIG_VIDEO_LCD_POWER="PH8" CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" -CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_MUSB_HOST=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3w" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y diff --git a/configs/iNet_86VS_defconfig b/configs/iNet_86VS_defconfig index b9f2066d1e..33162d1808 100644 --- a/configs/iNet_86VS_defconfig +++ b/configs/iNet_86VS_defconfig @@ -9,7 +9,7 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:209,up:22,lo CONFIG_VIDEO_LCD_POWER="AXP0-0" CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" -CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_MUSB_HOST=y CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-inet-86vs" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y diff --git a/drivers/usb/musb-new/Kconfig b/drivers/usb/musb-new/Kconfig index 34a84740e0..0082ff87f0 100644 --- a/drivers/usb/musb-new/Kconfig +++ b/drivers/usb/musb-new/Kconfig @@ -12,3 +12,17 @@ config USB_MUSB_GADGET bool "MUSB gadget mode support" help Enables the MUSB USB dual-role controller in gadget mode. + +if USB_MUSB_HOST || USB_MUSB_GADGET + +config USB_MUSB_SUNXI + bool "Enable sunxi OTG / DRC USB controller" + depends on ARCH_SUNXI + default y + ---help--- + Say y here to enable support for the sunxi OTG / DRC USB controller + used on almost all sunxi boards. Note currently u-boot can only have + one usb host controller enabled at a time, so enabling this on boards + which also use the ehci host controller will result in build errors. + +endif