warp: Fix RAM size runtime detection

Since commit a13d3757f7 ("warp: Use imx_ddr_size() for calculating the
DDR size") warp board no longer boots.

The reason for the breakage is that the warp board is using the DDR
configuration from mx6slevk. A fundamental difference between warp and
mx6slevk is that warp only uses one DDR chip select while mx6slevk uses two.

The imx_ddr() function calculates the RAM size in runtime by reading the
values of registers MDCTL and MDMISC.

So in order to fix this warp boot issue, create a imximage DDR file specific
to warp, where the MDCTL register is configured to only activates a single
chip select.

Reported-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
This commit is contained in:
Fabio Estevam 2016-08-15 10:07:12 -03:00 committed by Stefano Babic
parent 7d301a594d
commit 693779e371
2 changed files with 116 additions and 1 deletions

115
board/warp/imximage.cfg Normal file
View File

@ -0,0 +1,115 @@
/*
* Copyright (C) 2013 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*
* Refer docs/README.imxmage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
*/
/* image version */
IMAGE_VERSION 2
/*
* Boot Device : one of
* spi, sd (the board has no nand neither onenand)
*/
BOOT_FROM sd
/*
* Device Configuration Data (DCD)
*
* Each entry must have the format:
* Addr-type Address Value
*
* where:
* Addr-type register length (1,2 or 4 bytes)
* Address absolute address of the register
* value value to be stored in the register
*/
DATA 4 0x020c4018 0x00260324
DATA 4 0x020c4068 0xffffffff
DATA 4 0x020c406c 0xffffffff
DATA 4 0x020c4070 0xffffffff
DATA 4 0x020c4074 0xffffffff
DATA 4 0x020c4078 0xffffffff
DATA 4 0x020c407c 0xffffffff
DATA 4 0x020c4080 0xffffffff
DATA 4 0x020e0344 0x00003030
DATA 4 0x020e0348 0x00003030
DATA 4 0x020e034c 0x00003030
DATA 4 0x020e0350 0x00003030
DATA 4 0x020e030c 0x00000030
DATA 4 0x020e0310 0x00000030
DATA 4 0x020e0314 0x00000030
DATA 4 0x020e0318 0x00000030
DATA 4 0x020e0300 0x00000030
DATA 4 0x020e031c 0x00000030
DATA 4 0x020e0338 0x00000028
DATA 4 0x020e0320 0x00000030
DATA 4 0x020e032c 0x00000000
DATA 4 0x020e033c 0x00000008
DATA 4 0x020e0340 0x00000008
DATA 4 0x020e05c4 0x00000030
DATA 4 0x020e05cc 0x00000030
DATA 4 0x020e05d4 0x00000030
DATA 4 0x020e05d8 0x00000030
DATA 4 0x020e05ac 0x00000030
DATA 4 0x020e05c8 0x00000030
DATA 4 0x020e05b0 0x00020000
DATA 4 0x020e05b4 0x00000000
DATA 4 0x020e05c0 0x00020000
DATA 4 0x020e05d0 0x00080000
DATA 4 0x021b001c 0x00008000
DATA 4 0x021b085c 0x1b4700c7
DATA 4 0x021b0800 0xa1390003
DATA 4 0x021b0890 0x00400000
DATA 4 0x021b08b8 0x00000800
DATA 4 0x021b081c 0x33333333
DATA 4 0x021b0820 0x33333333
DATA 4 0x021b0824 0x33333333
DATA 4 0x021b0828 0x33333333
DATA 4 0x021b082c 0xf3333333
DATA 4 0x021b0830 0xf3333333
DATA 4 0x021b0834 0xf3333333
DATA 4 0x021b0838 0xf3333333
DATA 4 0x021b0848 0x4241444a
DATA 4 0x021b0850 0x3030312b
DATA 4 0x021b083c 0x20000000
DATA 4 0x021b0840 0x00000000
DATA 4 0x021b08c0 0x24911492
DATA 4 0x021b08b8 0x00000800
DATA 4 0x021b000c 0x33374133
DATA 4 0x021b0004 0x00020024
DATA 4 0x021b0010 0x00100A82
DATA 4 0x021b0014 0x00000093
DATA 4 0x021b0018 0x00001688
DATA 4 0x021b002c 0x0f9f26d2
DATA 4 0x021b0030 0x009f0e10
DATA 4 0x021b0038 0x00190778
DATA 4 0x021b0008 0x00000000
DATA 4 0x021b0040 0x0000004f
DATA 4 0x021b0000 0x83110000
DATA 4 0x021b001c 0x003f8030
DATA 4 0x021b001c 0xff0a8030
DATA 4 0x021b001c 0x82018030
DATA 4 0x021b001c 0x04028030
DATA 4 0x021b001c 0x02038030
DATA 4 0x021b001c 0xff0a8038
DATA 4 0x021b001c 0x82018038
DATA 4 0x021b001c 0x04028038
DATA 4 0x021b001c 0x02038038
DATA 4 0x021b0800 0xa1310003
DATA 4 0x021b0020 0x00001800
DATA 4 0x021b0818 0x00000000
DATA 4 0x021b08b8 0x00000800
DATA 4 0x021b0004 0x00025564
DATA 4 0x021b0404 0x00011006
DATA 4 0x021b001c 0x00000000

View File

@ -1,7 +1,7 @@
CONFIG_ARM=y
CONFIG_ARCH_MX6=y
CONFIG_TARGET_WARP=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/warp/imximage.cfg,MX6SL"
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y