leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

net: zynq: Fix MDC setting for zynq

Browse Source 
Based on spec:
"MDC must not exceed 2.5 MHz (MDC is only active during MDIO read and
write operations)"
Zynq is running on 111MHz. Current setting is 32 which is 111/32=3.47
which is above of 2.5MHz.
Using 48 divider will give us correct setting according spec
(111/48=2.31).

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
This commit is contained in:
Michal Simek 2015-09-08 17:07:01 +02:00
parent 2889659a55
commit 6777f38630
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/net/zynq_gem.c
View File

@ -58,7 +58,7 @@
#define ZYNQ_GEM_NWCFG_SPEED1000 0x000000400 /* 1Gbps operation */
#define ZYNQ_GEM_NWCFG_FDEN 0x000000002 /* Full Duplex mode */
#define ZYNQ_GEM_NWCFG_FSREM 0x000020000 /* FCS removal */
#define ZYNQ_GEM_NWCFG_MDCCLKDIV 0x000080000 /* Div pclk by 32, 80MHz */
#define ZYNQ_GEM_NWCFG_MDCCLKDIV 0x0000c0000 /* Div pclk by 48, max 120MHz */
#ifdef CONFIG_ARM64
# define ZYNQ_GEM_DBUS_WIDTH (1 << 21) /* 64 bit bus */