leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

* Patch by Rune Torgersen, 17 Sep 2003:

Browse Source 
- Fixes for MPC8266 default config
  - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
This commit is contained in:
wdenk 2003-09-18 10:45:21 +00:00
parent 206c60cbea
commit 65bd0e284b
5 changed files with 95 additions and 57 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
CHANGELOG
View File

@ -4,6 +4,7 @@ Changes for U-Boot 1.0.0:
* Patch by Rune Torgersen, 17 Sep 2003:
- Fixes for MPC8266 default config
- Allow eth_loopback_test() on 8260 to use a subset of the FCC's
* Patches by Jon Diekema, 17 Sep 2003:
- update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and

14
board/mpc8266ads/mpc8266ads.c
View File

@ -427,7 +427,7 @@ long int initdram(int board_type)
bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
sda10 = sdam + 2;
#else
sdam = cols - 6;
sdam = cols + banks - 8;
bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
sda10 = sdam;
#endif
@ -557,9 +557,18 @@ long int initdram(int board_type)
printf("SDRAM configuration read from SPD\n");
printf("\tSize per side = %dMB\n", sdram_size >> 20);
printf("\tOrganization: %d sides, %d banks, %d Columns, %d Rows, Data width = %d bits\n", chipselects, 1<<(banks), cols, rows, data_width);
printf("\tRefresh rate = %d, CAS latency = %d\n", psrt, caslatency);
printf("\tRefresh rate = %d, CAS latency = %d", psrt, caslatency);
#if(CONFIG_PBI == 0) /* bank-based interleaving */
printf(", Using Bank Based Interleave\n");
#else
printf(", Using Page Based Interleave\n");
#endif
printf("\tTotal size: ");
/* this delay only needed for original 16MB DIMM...
* Not needed for any other memory configuration */
if ((sdram_size * chipselects) == (16 *1024 *1024))
udelay (250000);
return (sdram_size * chipselects);
/*return (16 * 1024 * 1024);*/
}
@ -575,3 +584,4 @@ void pci_init_board(void)
pci_mpc8250_init(&hose);
}
#endif

40
cpu/mpc8260/ether_fcc.c
View File

@ -650,6 +650,15 @@ eth_loopback_test (void)
/* 28.9 - (1-2): ioports have been set up already */
#if defined(CONFIG_HYMOD)
/*
* Attention: this is board-specific
* 0, FCC1
* 1, FCC2
* 2, FCC3
*/
# define FCC_START_LOOP 0
# define FCC_END_LOOP 2
/*
* Attention: this is board-specific
* - FCC1 Rx-CLK is CLK10
@ -665,13 +674,30 @@ eth_loopback_test (void)
immr->im_cpmux.cmx_fcr = CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11|\
CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14|\
CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16;
#elif defined(CONFIG_SBC8260) || defined(CONFIG_SACSng)
/*
* Attention: this is board-specific
* 1, FCC2
*/
# define FCC_START_LOOP 1
# define FCC_END_LOOP 1
/*
* Attention: this is board-specific
* - FCC2 Rx-CLK is CLK13
* - FCC2 Tx-CLK is CLK14
*/
/* 28.9 - (3): connect FCC's tx and rx clocks */
immr->im_cpmux.cmx_uar = 0;
immr->im_cpmux.cmx_fcr = CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14;
#else
#error "eth_loopback_test not supported on your board"
#endif
puts ("Initialise FCC channels:");
for (c = 0; c < 3; c++) {
for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) {
elbt_chan *ecp = &elbt_chans[c];
volatile fcc_t *fcp = &immr->im_fcc[c];
volatile fcc_enet_t *fpp;
@ -853,7 +879,7 @@ eth_loopback_test (void)
do {
nclosed = 0;
for (c = 0; c < 3; c++) {
for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) {
volatile fcc_t *fcp = &immr->im_fcc[c];
elbt_chan *ecp = &elbt_chans[c];
int i;
@ -1082,7 +1108,7 @@ eth_loopback_test (void)
}
}
} while (nclosed < 3);
} while (nclosed < (FCC_END_LOOP - FCC_START_LOOP + 1));
runtime = get_timer (runtime);
if (runtime <= ELBT_CLSWAIT) {
@ -1099,7 +1125,7 @@ eth_loopback_test (void)
* now print stats
*/
for (c = 0; c < 3; c++) {
for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) {
elbt_chan *ecp = &elbt_chans[c];
uint rxpps, txpps, nerr;
@ -1131,17 +1157,17 @@ eth_loopback_test (void)
}
puts ("Receive Error Counts:\n");
for (c = 0; c < 3; c++)
for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++)
bases[c] = (uchar *)&elbt_chans[c].rxeacc;
print_desc (rxeacc_descs, rxeacc_ndesc, bases, 3);
puts ("\nTransmit Error Counts:\n");
for (c = 0; c < 3; c++)
for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++)
bases[c] = (uchar *)&elbt_chans[c].txeacc;
print_desc (txeacc_descs, txeacc_ndesc, bases, 3);
puts ("\nRMON(-like) Counters:\n");
for (c = 0; c < 3; c++)
for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++)
bases[c] = (uchar *)&immr->im_dprambase[elbt_chans[c].proff];
print_desc (epram_descs, epram_ndesc, bases, 3);
}

3
include/configs/MPC8266ADS.h
View File

@ -508,7 +508,8 @@
#define CFG_MPTPR 0x00001900
#define CFG_PSRT 0x00000021
#define CFG_RESET_ADDRESS 0x04400000
/* This address must not exist */
#define CFG_RESET_ADDRESS 0xFCFFFF00
/* PCI Memory map (if different from default map */
#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE /* Local base */

94
include/miiphy.h
View File

@ -1,38 +1,38 @@
/*----------------------------------------------------------------------------+
|
| This source code has been made available to you by IBM on an AS-IS
| basis. Anyone receiving this source is licensed under IBM
| copyrights to use it in any way he or she deems fit, including
| copying it, modifying it, compiling it, and redistributing it either
| with or without modifications. No license under IBM patents or
| patent applications is to be implied by the copyright license.
| This source code has been made available to you by IBM on an AS-IS
| basis. Anyone receiving this source is licensed under IBM
| copyrights to use it in any way he or she deems fit, including
| copying it, modifying it, compiling it, and redistributing it either
| with or without modifications. No license under IBM patents or
| patent applications is to be implied by the copyright license.
|
| Any user of this software should understand that IBM cannot provide
| technical support for this software and will not be responsible for
| any consequences resulting from the use of this software.
| Any user of this software should understand that IBM cannot provide
| technical support for this software and will not be responsible for
| any consequences resulting from the use of this software.
|
| Any person who transfers this source code or any derivative work
| must include the IBM copyright notice, this paragraph, and the
| preceding two paragraphs in the transferred software.
| Any person who transfers this source code or any derivative work
| must include the IBM copyright notice, this paragraph, and the
| preceding two paragraphs in the transferred software.
|
| COPYRIGHT I B M CORPORATION 1999
| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
| COPYRIGHT I B M CORPORATION 1999
| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+----------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------+
|
| File Name: miiphy.h
| File Name: miiphy.h
|
| Function: Include file defining PHY registers.
| Function: Include file defining PHY registers.
|
| Author: Mark Wisner
| Author: Mark Wisner
|
| Change Activity-
|
| Date Description of Change BY
| --------- --------------------- ---
| 04-May-99 Created MKW
| 07-Jul-99 Added full duplex support MKW
| 08-Sep-01 Tweaks gvb
| Date Description of Change BY
| --------- --------------------- ---
| 04-May-99 Created MKW
| 07-Jul-99 Added full duplex support MKW
| 08-Sep-01 Tweaks gvb
|
+----------------------------------------------------------------------------*/
#ifndef _miiphy_h_
@ -49,35 +49,35 @@ int miiphy_duplex(unsigned char addr);
/* phy seed setup */
#define AUTO 99
#define _100BASET 100
#define _10BASET 10
#define HALF 22
#define FULL 44
#define AUTO 99
#define _100BASET 100
#define _10BASET 10
#define HALF 22
#define FULL 44
/* phy register offsets */
#define PHY_BMCR 0x00
#define PHY_BMCR 0x00
#define PHY_BMSR 0x01
#define PHY_PHYIDR1 0x02
#define PHY_PHYIDR2 0x03
#define PHY_PHYIDR1 0x02
#define PHY_PHYIDR2 0x03
#define PHY_ANAR 0x04
#define PHY_ANLPAR 0x05
#define PHY_ANLPAR 0x05
#define PHY_ANER 0x06
#define PHY_ANNPTR 0x07
#define PHY_PHYSTS 0x10
#define PHY_MIPSCR 0x11
#define PHY_MIPGSR 0x12
#define PHY_DCR 0x13
#define PHY_ANNPTR 0x07
#define PHY_PHYSTS 0x10
#define PHY_MIPSCR 0x11
#define PHY_MIPGSR 0x12
#define PHY_DCR 0x13
#define PHY_FCSCR 0x14
#define PHY_RECR 0x15
#define PHY_PCSR 0x16
#define PHY_LBR 0x17
#define PHY_10BTSCR 0x18
#define PHY_PHYCTRL 0x19
#define PHY_LBR 0x17
#define PHY_10BTSCR 0x18
#define PHY_PHYCTRL 0x19
/* PHY BMCR */
#define PHY_BMCR_RESET 0x8000
#define PHY_BMCR_LOOP 0x4000
#define PHY_BMCR_RESET 0x8000
#define PHY_BMCR_LOOP 0x4000
#define PHY_BMCR_100MB 0x2000
#define PHY_BMCR_AUTON 0x1000
#define PHY_BMCR_POWD 0x0800
@ -103,11 +103,11 @@ int miiphy_duplex(unsigned char addr);
/*phy ANLPAR */
#define PHY_ANLPAR_NP 0x8000
#define PHY_ANLPAR_ACK 0x4000
#define PHY_ANLPAR_RF 0x2000
#define PHY_ANLPAR_T4 0x0200
#define PHY_ANLPAR_TXFD 0x0100
#define PHY_ANLPAR_TX 0x0080
#define PHY_ANLPAR_RF 0x2000
#define PHY_ANLPAR_T4 0x0200
#define PHY_ANLPAR_TXFD 0x0100
#define PHY_ANLPAR_TX 0x0080
#define PHY_ANLPAR_10FD 0x0040
#define PHY_ANLPAR_10 0x0020
#define PHY_ANLPAR_100 0x0380 /* we can run at 100 */
#define PHY_ANLPAR_10 0x0020
#define PHY_ANLPAR_100 0x0380 /* we can run at 100 */
#endif