arm: imx6q: Add Engicam i.CoreM6 Solo/Duallite RQS Starter Kit initial support
Boot from MMC: ------------- U-Boot SPL 2016.11-rc2-g217bd8e-dirty (Nov 08 2016 - 22:56:07) Trying to boot from MMC1 U-Boot 2016.11-rc2-g217bd8e-dirty (Nov 08 2016 - 22:56:07 +0530) CPU: Freescale i.MX6DL rev1.3 at 792 MHz Reset cause: POR Model: Engicam i.CoreM6 DualLite/Solo RQS Starter Kit DRAM: 512 MiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 icorem6qdl-rqs> Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
This commit is contained in:
Jagan Teki
Stefano Babic
parent
871ec6da42
commit
6121a54d60
@ -298,6 +298,7 @@ dtb-$(CONFIG_MX53) += imx53-cx9020.dtb
|
||||
dtb-$(CONFIG_MX6) += imx6ull-14x14-evk.dtb \
|
||||
imx6sll-evk.dtb \
|
||||
imx6dl-icore.dtb \
|
||||
imx6dl-icore-rqs.dtb \
|
||||
imx6q-icore.dtb \
|
||||
imx6q-icore-rqs.dtb \
|
||||
imx6ul-geam-kit.dtb
|
||||
|
||||
50
arch/arm/dts/imx6dl-icore-rqs.dts
Normal file
50
arch/arm/dts/imx6dl-icore-rqs.dts
Normal file
@ -0,0 +1,50 @@
|
||||
/*
|
||||
* Copyright (C) 2015 Amarula Solutions B.V.
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "imx6q.dtsi"
|
||||
#include "imx6qdl-icore-rqs.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Engicam i.CoreM6 DualLite/Solo RQS Starter Kit";
|
||||
compatible = "engicam,imx6-icore-rqs", "fsl,imx6q";
|
||||
};
|
||||
@ -4,3 +4,4 @@ S: Maintained
|
||||
F: board/engicam/icorem6_rqs
|
||||
F: include/configs/imx6qdl_icore_rqs.h
|
||||
F: configs/imx6q_icore_rqs_mmc_defconfig
|
||||
F: configs/imx6dl_icore_rqs_mmc_defconfig
|
||||
|
||||
@ -1,11 +1,14 @@
|
||||
How to use U-Boot on Engicam i.CoreM6 RQS Quad/Dual Starter Kit:
|
||||
----------------------------------------------------------------
|
||||
How to use U-Boot on Engicam i.CoreM6 RQS Solo/DualLite and Quad/Dual Starter Kit:
|
||||
----------------------------------------------------------------------------------
|
||||
|
||||
$ make mrproper
|
||||
|
||||
- Configure U-Boot for Engicam i.CoreM6 RQS Quad/Dual:
|
||||
$ make imx6q_icore_rqs_mmc_defconfig
|
||||
|
||||
- Configure U-Boot for Engicam i.CoreM6 RQS Solo/DualLite:
|
||||
$ make imx6dl_icore_rqs_mmc_defconfig
|
||||
|
||||
- Build U-Boot
|
||||
$ make
|
||||
|
||||
|
||||
38
configs/imx6dl_icore_rqs_mmc_defconfig
Normal file
38
configs/imx6dl_icore_rqs_mmc_defconfig
Normal file
@ -0,0 +1,38 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_TARGET_MX6Q_ICORE_RQS=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,ENV_IS_IN_MMC"
|
||||
CONFIG_DEFAULT_FDT_FILE="imx6dl-icore-rqs.dtb"
|
||||
CONFIG_DEFAULT_DEVICE_TREE="imx6dl-icore-rqs"
|
||||
CONFIG_SYS_PROMPT="icorem6qdl-rqs> "
|
||||
CONFIG_SPL=y
|
||||
CONFIG_BOOTDELAY=3
|
||||
CONFIG_BOARD_EARLY_INIT_F=y
|
||||
CONFIG_DISPLAY_CPUINFO=y
|
||||
CONFIG_HUSH_PARSER=y
|
||||
CONFIG_AUTO_COMPLETE=y
|
||||
CONFIG_SYS_MAXARGS=32
|
||||
# CONFIG_CMD_IMLS is not set
|
||||
# CONFIG_BLK is not set
|
||||
# CONFIG_DM_MMC_OPS is not set
|
||||
CONFIG_CMD_BOOTZ=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_MEMTEST=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_CACHE=y
|
||||
CONFIG_CMD_EXT2=y
|
||||
CONFIG_CMD_EXT4=y
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_CMD_FAT=y
|
||||
CONFIG_CMD_FS_GENERIC=y
|
||||
CONFIG_OF_LIBFDT=y
|
||||
CONFIG_MXC_UART=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCTRL_IMX6=y
|
||||
CONFIG_SPL_LIBDISK_SUPPORT=y
|
||||
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
||||
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
||||
CONFIG_SPL_SERIAL_SUPPORT=y
|
||||
CONFIG_SPL_GPIO_SUPPORT=y
|
||||
CONFIG_SPL_WATCHDOG_SUPPORT=y
|
||||
CONFIG_SPL_EXT_SUPPORT=y
|
||||
Loading…
Reference in New Issue
Block a user