atmel: Update support of board AT91SAM9M10G45-EK to new style
Based on earlier work by Alex Waterman <awaterman@dawning.com>. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit is contained in:
Thomas Petazzoni
Albert ARIBAUD
parent
55d11d22ca
commit
5cfeec5125
4
MAKEALL
4
MAKEALL
@ -443,9 +443,7 @@ LIST_ARMV7=" \
|
||||
## AT91 Systems
|
||||
#########################################################################
|
||||
|
||||
LIST_at91="$(boards_by_soc at91)\
|
||||
at91sam9m10g45ek \
|
||||
"
|
||||
LIST_at91="$(boards_by_soc at91)"
|
||||
|
||||
#########################################################################
|
||||
## Xscale Systems
|
||||
|
||||
25
Makefile
25
Makefile
@ -798,31 +798,6 @@ M5485HFE_config : unconfig
|
||||
# ARM
|
||||
#========================================================================
|
||||
|
||||
#########################################################################
|
||||
## ARM926EJ-S Systems
|
||||
#########################################################################
|
||||
|
||||
at91sam9m10g45ek_nandflash_config \
|
||||
at91sam9m10g45ek_dataflash_config \
|
||||
at91sam9m10g45ek_dataflash_cs0_config \
|
||||
at91sam9m10g45ek_config \
|
||||
at91sam9g45ekes_nandflash_config \
|
||||
at91sam9g45ekes_dataflash_config \
|
||||
at91sam9g45ekes_dataflash_cs0_config \
|
||||
at91sam9g45ekes_config : unconfig
|
||||
@mkdir -p $(obj)include
|
||||
@if [ "$(findstring 9m10,$@)" ] ; then \
|
||||
echo "#define CONFIG_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \
|
||||
else \
|
||||
echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \
|
||||
fi;
|
||||
@if [ "$(findstring _nandflash,$@)" ] ; then \
|
||||
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
|
||||
else \
|
||||
echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \
|
||||
fi;
|
||||
@$(MKCONFIG) -n $@ -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
|
||||
|
||||
########################################################################
|
||||
## ARM Integrator boards - see doc/README-integrator for more info.
|
||||
integratorap_config \
|
||||
|
||||
@ -23,17 +23,14 @@
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/sizes.h>
|
||||
#include <asm/arch/at91sam9g45.h>
|
||||
#include <asm/arch/at91sam9_matrix.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/at91sam9g45_matrix.h>
|
||||
#include <asm/arch/at91sam9_smc.h>
|
||||
#include <asm/arch/at91_common.h>
|
||||
#include <asm/arch/at91_pmc.h>
|
||||
#include <asm/arch/at91_rstc.h>
|
||||
#include <asm/arch/clk.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
#include <asm/arch/io.h>
|
||||
#include <asm/arch/hardware.h>
|
||||
#include <asm/arch/clk.h>
|
||||
#include <lcd.h>
|
||||
#include <atmel_lcdc.h>
|
||||
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
|
||||
@ -49,35 +46,38 @@ DECLARE_GLOBAL_DATA_PTR;
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
static void at91sam9m10g45ek_nand_hw_init(void)
|
||||
void at91sam9m10g45ek_nand_hw_init(void)
|
||||
{
|
||||
struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
|
||||
struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
|
||||
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
||||
unsigned long csa;
|
||||
|
||||
/* Enable CS3 */
|
||||
csa = at91_sys_read(AT91_MATRIX_EBICSA);
|
||||
at91_sys_write(AT91_MATRIX_EBICSA,
|
||||
csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
|
||||
csa = readl(&matrix->ebicsa);
|
||||
csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA;
|
||||
writel(csa, &matrix->ebicsa);
|
||||
|
||||
/* Configure SMC CS3 for NAND/SmartMedia */
|
||||
at91_sys_write(AT91_SMC_SETUP(3),
|
||||
AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
|
||||
AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
|
||||
at91_sys_write(AT91_SMC_PULSE(3),
|
||||
AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(3) |
|
||||
AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(2));
|
||||
at91_sys_write(AT91_SMC_CYCLE(3),
|
||||
AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(4));
|
||||
at91_sys_write(AT91_SMC_MODE(3),
|
||||
AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
|
||||
AT91_SMC_EXNWMODE_DISABLE |
|
||||
writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
|
||||
AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
|
||||
&smc->cs[3].setup);
|
||||
writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(3) |
|
||||
AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(2),
|
||||
&smc->cs[3].pulse);
|
||||
writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(4),
|
||||
&smc->cs[3].cycle);
|
||||
writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
|
||||
AT91_SMC_MODE_EXNW_DISABLE |
|
||||
#ifdef CONFIG_SYS_NAND_DBW_16
|
||||
AT91_SMC_DBW_16 |
|
||||
AT91_SMC_MODE_DBW_16 |
|
||||
#else /* CONFIG_SYS_NAND_DBW_8 */
|
||||
AT91_SMC_DBW_8 |
|
||||
AT91_SMC_MODE_DBW_8 |
|
||||
#endif
|
||||
AT91_SMC_TDF_(3));
|
||||
AT91_SMC_MODE_TDF_CYCLE(3),
|
||||
&smc->cs[3].mode);
|
||||
|
||||
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIOC);
|
||||
writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
|
||||
|
||||
/* Configure RDY/BSY */
|
||||
at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
|
||||
@ -90,7 +90,9 @@ static void at91sam9m10g45ek_nand_hw_init(void)
|
||||
#ifdef CONFIG_CMD_USB
|
||||
static void at91sam9m10g45ek_usb_hw_init(void)
|
||||
{
|
||||
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIODE);
|
||||
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
||||
|
||||
writel(1 << ATMEL_ID_PIODE, &pmc->pcer);
|
||||
|
||||
at91_set_gpio_output(AT91_PIN_PD1, 0);
|
||||
at91_set_gpio_output(AT91_PIN_PD3, 0);
|
||||
@ -100,47 +102,50 @@ static void at91sam9m10g45ek_usb_hw_init(void)
|
||||
#ifdef CONFIG_MACB
|
||||
static void at91sam9m10g45ek_macb_hw_init(void)
|
||||
{
|
||||
unsigned long rstc;
|
||||
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
||||
struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
|
||||
struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
|
||||
unsigned long erstl;
|
||||
|
||||
/* Enable clock */
|
||||
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_EMAC);
|
||||
writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
|
||||
|
||||
/*
|
||||
* Disable pull-up on:
|
||||
* RXDV (PA15) => PHY normal mode (not Test mode)
|
||||
* ERX0 (PA12) => PHY ADDR0
|
||||
* ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0
|
||||
* RXDV (PA15) => PHY normal mode (not Test mode)
|
||||
* ERX0 (PA12) => PHY ADDR0
|
||||
* ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0
|
||||
*
|
||||
* PHY has internal pull-down
|
||||
*/
|
||||
writel(pin_to_mask(AT91_PIN_PA15) |
|
||||
pin_to_mask(AT91_PIN_PA12) |
|
||||
pin_to_mask(AT91_PIN_PA13),
|
||||
pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
|
||||
&pioa->pudr);
|
||||
|
||||
rstc = at91_sys_read(AT91_RSTC_MR);
|
||||
erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
|
||||
|
||||
/* Need to reset PHY -> 500ms reset */
|
||||
at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
|
||||
(AT91_RSTC_ERSTL & (0x0D << 8)) |
|
||||
AT91_RSTC_URSTEN);
|
||||
writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
|
||||
AT91_RSTC_MR_URSTEN, &rstc->mr);
|
||||
|
||||
at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
|
||||
writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
|
||||
|
||||
/* Wait for end hardware reset */
|
||||
while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
|
||||
while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
|
||||
;
|
||||
|
||||
/* Restore NRST value */
|
||||
at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
|
||||
(rstc) |
|
||||
AT91_RSTC_URSTEN);
|
||||
writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
|
||||
&rstc->mr);
|
||||
|
||||
/* Re-enable pull-up */
|
||||
writel(pin_to_mask(AT91_PIN_PA15) |
|
||||
pin_to_mask(AT91_PIN_PA12) |
|
||||
pin_to_mask(AT91_PIN_PA13),
|
||||
pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
|
||||
&pioa->puer);
|
||||
|
||||
/* And the pins. */
|
||||
at91_macb_hw_init();
|
||||
}
|
||||
#endif
|
||||
@ -161,7 +166,7 @@ vidinfo_t panel_info = {
|
||||
vl_vsync_len: 1,
|
||||
vl_upper_margin:40,
|
||||
vl_lower_margin:1,
|
||||
mmio: AT91SAM9G45_LCDC_BASE,
|
||||
mmio : ATMEL_BASE_LCDC,
|
||||
};
|
||||
|
||||
|
||||
@ -177,6 +182,8 @@ void lcd_disable(void)
|
||||
|
||||
static void at91sam9m10g45ek_lcd_hw_init(void)
|
||||
{
|
||||
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
||||
|
||||
at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */
|
||||
at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */
|
||||
at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */
|
||||
@ -208,7 +215,7 @@ static void at91sam9m10g45ek_lcd_hw_init(void)
|
||||
at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */
|
||||
at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */
|
||||
|
||||
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_LCDC);
|
||||
writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
|
||||
|
||||
gd->fb_base = CONFIG_AT91SAM9G45_LCD_BASE;
|
||||
}
|
||||
@ -227,7 +234,7 @@ void lcd_show_board_info(void)
|
||||
lcd_printf ("(C) 2008 ATMEL Corp\n");
|
||||
lcd_printf ("at91support@atmel.com\n");
|
||||
lcd_printf ("%s CPU at %s MHz\n",
|
||||
CONFIG_SYS_AT91_CPU_NAME,
|
||||
ATMEL_CPU_NAME,
|
||||
strmhz(temp, get_cpu_clk_rate()));
|
||||
|
||||
dram_size = 0;
|
||||
@ -243,6 +250,12 @@ void lcd_show_board_info(void)
|
||||
#endif /* CONFIG_LCD_INFO */
|
||||
#endif
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
at91_seriald_hw_init();
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
/* Enable Ctrlc */
|
||||
@ -254,10 +267,10 @@ int board_init(void)
|
||||
#elif defined CONFIG_AT91SAM9G45EKES
|
||||
gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G45EKES;
|
||||
#endif
|
||||
/* adress of boot parameters */
|
||||
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
|
||||
|
||||
at91_serial_hw_init();
|
||||
/* adress of boot parameters */
|
||||
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
||||
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
at91sam9m10g45ek_nand_hw_init();
|
||||
#endif
|
||||
@ -270,11 +283,9 @@ int board_init(void)
|
||||
#ifdef CONFIG_ATMEL_SPI
|
||||
at91_spi0_hw_init(1 << 4);
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MACB
|
||||
at91sam9m10g45ek_macb_hw_init();
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_LCD
|
||||
at91sam9m10g45ek_lcd_hw_init();
|
||||
#endif
|
||||
@ -283,8 +294,8 @@ int board_init(void)
|
||||
|
||||
int dram_init(void)
|
||||
{
|
||||
gd->bd->bi_dram[0].start = PHYS_SDRAM;
|
||||
gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
|
||||
gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE,
|
||||
CONFIG_SYS_SDRAM_SIZE);
|
||||
return 0;
|
||||
}
|
||||
|
||||
@ -298,7 +309,7 @@ int board_eth_init(bd_t *bis)
|
||||
{
|
||||
int rc = 0;
|
||||
#ifdef CONFIG_MACB
|
||||
rc = macb_eth_initialize(0, (void *)AT91SAM9G45_BASE_EMAC, 0x00);
|
||||
rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00);
|
||||
#endif
|
||||
return rc;
|
||||
}
|
||||
|
||||
@ -23,15 +23,17 @@
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/at91sam9g45.h>
|
||||
#include <asm/arch/at91_pmc.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
#include <asm/arch/io.h>
|
||||
|
||||
void coloured_LED_init(void)
|
||||
{
|
||||
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
||||
|
||||
/* Enable clock */
|
||||
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIODE);
|
||||
writel(1 << ATMEL_ID_PIODE, &pmc->pcer);
|
||||
|
||||
at91_set_gpio_output(CONFIG_RED_LED, 1);
|
||||
at91_set_gpio_output(CONFIG_GREEN_LED, 1);
|
||||
|
||||
@ -95,6 +95,7 @@ at91sam9g10ek_dataflash_cs3 arm arm926ejs at91sam9261ek atmel
|
||||
at91sam9g20ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_NANDFLASH
|
||||
at91sam9g20ek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS0
|
||||
at91sam9g20ek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS1
|
||||
at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek atmel at91 at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_NANDFLASH
|
||||
at91sam9rlek_nandflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH
|
||||
at91sam9rlek_dataflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH
|
||||
at91sam9xeek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_NANDFLASH
|
||||
|
||||
@ -27,48 +27,60 @@
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#include <asm/hardware.h>
|
||||
|
||||
#define CONFIG_AT91_LEGACY
|
||||
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
|
||||
|
||||
/* ARM asynchronous clock */
|
||||
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
|
||||
#define CONFIG_SYS_HZ 1000
|
||||
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
|
||||
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
|
||||
#define CONFIG_SYS_HZ 1000
|
||||
|
||||
#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
|
||||
#ifdef CONFIG_AT91SAM9M10G45EK
|
||||
#define CONFIG_AT91SAM9M10G45 1 /* It's an Atmel AT91SAM9M10G45 SoC*/
|
||||
#else
|
||||
#define CONFIG_AT91SAM9G45 1 /* It's an Atmel AT91SAM9G45 SoC*/
|
||||
#endif
|
||||
#define CONFIG_AT91SAM9M10G45EK
|
||||
#define CONFIG_AT91FAMILY
|
||||
#define CONFIG_ARCH_CPU_INIT
|
||||
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
|
||||
|
||||
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
||||
#define CONFIG_SETUP_MEMORY_TAGS 1
|
||||
#define CONFIG_INITRD_TAG 1
|
||||
|
||||
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
||||
#define CONFIG_SETUP_MEMORY_TAGS
|
||||
#define CONFIG_INITRD_TAG
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT
|
||||
#define CONFIG_BOARD_EARLY_INIT_F
|
||||
#define CONFIG_DISPLAY_CPUINFO
|
||||
|
||||
/* general purpose I/O */
|
||||
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
|
||||
#define CONFIG_AT91_GPIO
|
||||
#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */
|
||||
|
||||
/* serial console */
|
||||
#define CONFIG_ATMEL_USART
|
||||
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
|
||||
#define CONFIG_USART_ID ATMEL_ID_SYS
|
||||
|
||||
/*
|
||||
* Hardware drivers
|
||||
* This needs to be defined for the OHCI code to work but it is defined as
|
||||
* ATMEL_ID_UHPHS in the CPU specific header files.
|
||||
*/
|
||||
#define CONFIG_AT91_GPIO 1
|
||||
#define CONFIG_ATMEL_USART 1
|
||||
#undef CONFIG_USART0
|
||||
#undef CONFIG_USART1
|
||||
#undef CONFIG_USART2
|
||||
#define CONFIG_USART3 1 /* USART 3 is DBGU */
|
||||
#define ATMEL_ID_UHP ATMEL_ID_UHPHS
|
||||
|
||||
/*
|
||||
* Specify the clock enable bit in the PMC_SCER register.
|
||||
*/
|
||||
#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP
|
||||
|
||||
/* LCD */
|
||||
#define CONFIG_LCD 1
|
||||
#define CONFIG_LCD
|
||||
#define LCD_BPP LCD_COLOR8
|
||||
#define CONFIG_LCD_LOGO 1
|
||||
#define CONFIG_LCD_LOGO
|
||||
#undef LCD_TEST_PATTERN
|
||||
#define CONFIG_LCD_INFO 1
|
||||
#define CONFIG_LCD_INFO_BELOW_LOGO 1
|
||||
#define CONFIG_SYS_WHITE_ON_BLACK 1
|
||||
#define CONFIG_ATMEL_LCD 1
|
||||
#define CONFIG_ATMEL_LCD_RGB565 1
|
||||
#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
|
||||
#define CONFIG_LCD_INFO
|
||||
#define CONFIG_LCD_INFO_BELOW_LOGO
|
||||
#define CONFIG_SYS_WHITE_ON_BLACK
|
||||
#define CONFIG_ATMEL_LCD
|
||||
#define CONFIG_ATMEL_LCD_RGB565
|
||||
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
||||
/* board specific(not enough SRAM) */
|
||||
#define CONFIG_AT91SAM9G45_LCD_BASE 0x73E00000
|
||||
|
||||
@ -82,10 +94,10 @@
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE 1
|
||||
#define CONFIG_BOOTP_BOOTPATH 1
|
||||
#define CONFIG_BOOTP_GATEWAY 1
|
||||
#define CONFIG_BOOTP_HOSTNAME 1
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
@ -98,44 +110,29 @@
|
||||
#undef CONFIG_CMD_AUTOSCRIPT
|
||||
#undef CONFIG_CMD_LOADS
|
||||
|
||||
#define CONFIG_CMD_PING 1
|
||||
#define CONFIG_CMD_DHCP 1
|
||||
#define CONFIG_CMD_NAND 1
|
||||
#define CONFIG_CMD_USB 1
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_NAND
|
||||
#define CONFIG_CMD_USB
|
||||
|
||||
/* SDRAM */
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
#define PHYS_SDRAM 0x70000000
|
||||
#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */
|
||||
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6
|
||||
#define CONFIG_SYS_SDRAM_SIZE 0x08000000
|
||||
|
||||
/* DataFlash */
|
||||
#ifdef CONFIG_ATMEL_SPI
|
||||
#define CONFIG_CMD_SF
|
||||
#define CONFIG_CMD_SPI
|
||||
#define CONFIG_SPI_FLASH 1
|
||||
#define CONFIG_SPI_FLASH_ATMEL 1
|
||||
#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
|
||||
#endif
|
||||
#define CONFIG_SYS_INIT_SP_ADDR \
|
||||
(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
|
||||
|
||||
/* NOR flash, if populated */
|
||||
#ifndef CONFIG_CMD_NAND
|
||||
#define CONFIG_SYS_NO_FLASH 1
|
||||
#else
|
||||
#define CONFIG_SYS_FLASH_CFI 1
|
||||
#define CONFIG_FLASH_CFI_DRIVER 1
|
||||
#define PHYS_FLASH_1 0x10000000
|
||||
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 256
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
||||
#endif
|
||||
/* No NOR flash */
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
|
||||
/* NAND flash */
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
#define CONFIG_NAND_MAX_CHIPS 1
|
||||
#define CONFIG_NAND_ATMEL
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
#define CONFIG_SYS_NAND_BASE 0x40000000
|
||||
#define CONFIG_SYS_NAND_DBW_8 1
|
||||
#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
|
||||
#define CONFIG_SYS_NAND_DBW_8
|
||||
/* our ALE is AD21 */
|
||||
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
|
||||
/* our CLE is AD22 */
|
||||
@ -146,68 +143,52 @@
|
||||
#endif
|
||||
|
||||
/* Ethernet */
|
||||
#define CONFIG_MACB 1
|
||||
#define CONFIG_RMII 1
|
||||
#define CONFIG_NET_MULTI 1
|
||||
#define CONFIG_MACB
|
||||
#define CONFIG_RMII
|
||||
#define CONFIG_NET_MULTI
|
||||
#define CONFIG_NET_RETRY_COUNT 20
|
||||
#define CONFIG_RESET_PHY_R 1
|
||||
#define CONFIG_RESET_PHY_R
|
||||
|
||||
/* USB */
|
||||
#define CONFIG_USB_ATMEL
|
||||
#define CONFIG_USB_OHCI_NEW 1
|
||||
#define CONFIG_DOS_PARTITION 1
|
||||
#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
|
||||
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* AT91SAM9G45_UHP_OHCI_BASE */
|
||||
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45"
|
||||
#define CONFIG_USB_OHCI_NEW
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#define CONFIG_SYS_USB_OHCI_CPU_INIT
|
||||
#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_HCI
|
||||
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45"
|
||||
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
|
||||
#define CONFIG_USB_STORAGE 1
|
||||
#define CONFIG_USB_STORAGE
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
|
||||
#define CONFIG_SYS_MEMTEST_END 0x23e00000
|
||||
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
||||
#define CONFIG_SYS_MEMTEST_END 0x23e00000
|
||||
|
||||
#ifdef CONFIG_SYS_USE_DATAFLASH
|
||||
|
||||
/* bootstrap + u-boot + env + linux in dataflash on CS0 */
|
||||
#define CONFIG_ENV_IS_IN_SPI_FLASH 1
|
||||
#define CONFIG_SYS_MONITOR_BASE (0xC0000000 + 0x8400)
|
||||
#define CONFIG_ENV_OFFSET 0x4200
|
||||
#define CONFIG_ENV_ADDR (0xC0000000 + CONFIG_ENV_OFFSET)
|
||||
#define CONFIG_ENV_SIZE 0x4200
|
||||
#define CONFIG_ENV_SECT_SIZE 0x10000
|
||||
#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
|
||||
#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
|
||||
"root=/dev/mtdblock0 " \
|
||||
"mtdparts=atmel_nand:-(root) "\
|
||||
"rw rootfstype=jffs2"
|
||||
|
||||
#else /* CONFIG_SYS_USE_NANDFLASH */
|
||||
|
||||
/* bootstrap + u-boot + env + linux in nandflash */
|
||||
#define CONFIG_ENV_IS_IN_NAND 1
|
||||
/* bootstrap + u-boot + env in nandflash */
|
||||
#define CONFIG_ENV_IS_IN_NAND
|
||||
#define CONFIG_ENV_OFFSET 0x60000
|
||||
#define CONFIG_ENV_OFFSET_REDUND 0x80000
|
||||
#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
|
||||
#define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm"
|
||||
#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
|
||||
"root=/dev/mtdblock5 " \
|
||||
"mtdparts=atmel_nand:128k(bootstrap)ro, \
|
||||
256k(uboot)ro,128k(env1)ro,128k(env2)ro, \
|
||||
2M(linux),-(root) " \
|
||||
"rw rootfstype=jffs2"
|
||||
#define CONFIG_ENV_SIZE 0x20000
|
||||
|
||||
#endif
|
||||
#define CONFIG_BOOTCOMMAND "nand read 0x70000000 0x100000 0x200000;" \
|
||||
"bootm 0x70000000"
|
||||
#define CONFIG_BOOTARGS \
|
||||
"console=ttyS0,115200 earlyprintk " \
|
||||
"root=/dev/mtdblock5 " \
|
||||
"mtdparts=atmel_nand:128k(bootstrap)ro," \
|
||||
"256k(uboot)ro,128k(env1)ro,128k(env2)ro," \
|
||||
"2M@1M(linux),-(root) " \
|
||||
"rw rootfstype=jffs2"
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
|
||||
|
||||
#define CONFIG_SYS_PROMPT "U-Boot> "
|
||||
#define CONFIG_SYS_CBSIZE 256
|
||||
#define CONFIG_SYS_MAXARGS 16
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
#define CONFIG_SYS_LONGHELP 1
|
||||
#define CONFIG_CMDLINE_EDITING 1
|
||||
#define CONFIG_SYS_LONGHELP
|
||||
#define CONFIG_CMDLINE_EDITING
|
||||
#define CONFIG_AUTO_COMPLETE
|
||||
#define CONFIG_SYS_HUSH_PARSER
|
||||
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
||||
|
||||
Loading…
Reference in New Issue
Block a user