mpc83xx: New board support for SIMPC8313
This patch will create a new board, SIMPC8313, from Sheldon Instruments. This board boots from NAND devices and is configureable for either large or small page devices. The board supports non-soldered DDR2, one ethernet port, a Marvell 88E1118 PHY, and PCI host support. The board also has a FPGA connected to the eLBC providing glue logic to a TMS320C67xx DSP. Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
This commit is contained in:
Ron Madrid
Kim Phillips
parent
6677876181
commit
5bb907a492
@ -263,6 +263,10 @@ Jon Loeliger <jdl@freescale.com>
|
||||
|
||||
MPC8641HPCN MPC8641D
|
||||
|
||||
Ron Madrid <info@sheldoninst.com>
|
||||
|
||||
SIMPC8313 MPC8313
|
||||
|
||||
Dan Malek <dan@embeddedalley.com>
|
||||
|
||||
stxgp3 MPC85xx
|
||||
|
||||
1
MAKEALL
1
MAKEALL
@ -353,6 +353,7 @@ LIST_83xx=" \
|
||||
MPC837XERDB \
|
||||
MVBLM7 \
|
||||
sbc8349 \
|
||||
SIMPC8313_LP \
|
||||
TQM834x \
|
||||
"
|
||||
|
||||
|
||||
15
Makefile
15
Makefile
@ -2328,6 +2328,21 @@ MVBLM7_config: unconfig
|
||||
sbc8349_config: unconfig
|
||||
@$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349
|
||||
|
||||
SIMPC8313_LP_config \
|
||||
SIMPC8313_SP_config: unconfig
|
||||
@mkdir -p $(obj)include
|
||||
@mkdir -p $(obj)board/sheldon/simpc8313
|
||||
@if [ "$(findstring _LP_,$@)" ] ; then \
|
||||
$(XECHO) -n "...Large Page NAND..." ; \
|
||||
echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \
|
||||
fi ; \
|
||||
if [ "$(findstring _SP_,$@)" ] ; then \
|
||||
$(XECHO) -n "...Small Page NAND..." ; \
|
||||
echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \
|
||||
fi ;
|
||||
@$(MKCONFIG) -a SIMPC8313 ppc mpc83xx simpc8313 sheldon
|
||||
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
|
||||
|
||||
TQM834x_config: unconfig
|
||||
@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
|
||||
|
||||
|
||||
50
board/sheldon/simpc8313/Makefile
Normal file
50
board/sheldon/simpc8313/Makefile
Normal file
@ -0,0 +1,50 @@
|
||||
#
|
||||
# (C) Copyright 2006
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk
|
||||
|
||||
LIB = $(obj)lib$(BOARD).a
|
||||
|
||||
COBJS := $(BOARD).o sdram.o
|
||||
|
||||
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
SOBJS := $(addprefix $(obj),$(SOBJS))
|
||||
|
||||
$(LIB): $(obj).depend $(OBJS)
|
||||
$(AR) $(ARFLAGS) $@ $(OBJS)
|
||||
|
||||
clean:
|
||||
rm -f $(SOBJS) $(OBJS)
|
||||
|
||||
distclean: clean
|
||||
rm -f $(LIB) core *.bak $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
|
||||
# defines $(obj).depend target
|
||||
include $(SRCTREE)/rules.mk
|
||||
|
||||
sinclude $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
13
board/sheldon/simpc8313/config.mk
Normal file
13
board/sheldon/simpc8313/config.mk
Normal file
@ -0,0 +1,13 @@
|
||||
ifndef NAND_SPL
|
||||
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
|
||||
endif
|
||||
|
||||
ifndef TEXT_BASE
|
||||
TEXT_BASE = 0x00100000
|
||||
endif
|
||||
|
||||
ifdef CONFIG_NAND_LP
|
||||
PAD_TO = 0xFFF20000
|
||||
else
|
||||
PAD_TO = 0xFFF04000
|
||||
endif
|
||||
193
board/sheldon/simpc8313/sdram.c
Normal file
193
board/sheldon/simpc8313/sdram.c
Normal file
@ -0,0 +1,193 @@
|
||||
/*
|
||||
* Copyright (C) Freescale Semiconductor, Inc. 2006-2007
|
||||
* Copyright (C) Sheldon Instruments, Inc. 2008
|
||||
*
|
||||
* Author: Ron Madrid <info@sheldoninst.com>
|
||||
*
|
||||
* (C) Copyright 2006
|
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <mpc83xx.h>
|
||||
#include <spd_sdram.h>
|
||||
#include <asm/bitops.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/mmu.h>
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
static long fixed_sdram(void);
|
||||
|
||||
#if defined(CONFIG_NAND_SPL)
|
||||
void si_wait_i2c(void)
|
||||
{
|
||||
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
|
||||
|
||||
while (!(__raw_readb(&im->i2c[0].sr) & 0x02))
|
||||
;
|
||||
|
||||
__raw_writeb(0x00, &im->i2c[0].sr);
|
||||
|
||||
sync();
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
void si_read_i2c(u32 lbyte, int count, u8 *buffer)
|
||||
{
|
||||
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
|
||||
u32 i;
|
||||
u8 chip = 0x50 << 1; /* boot sequencer I2C */
|
||||
u32 ubyte = (lbyte & 0xff00) >> 8;
|
||||
|
||||
lbyte &= 0xff;
|
||||
|
||||
/*
|
||||
* Set up controller
|
||||
*/
|
||||
__raw_writeb(0x3f, &im->i2c[0].fdr);
|
||||
__raw_writeb(0x00, &im->i2c[0].adr);
|
||||
__raw_writeb(0x00, &im->i2c[0].sr);
|
||||
__raw_writeb(0x00, &im->i2c[0].dr);
|
||||
|
||||
while (__raw_readb(&im->i2c[0].sr) & 0x20)
|
||||
;
|
||||
|
||||
/*
|
||||
* Writing address to device
|
||||
*/
|
||||
__raw_writeb(0xb0, &im->i2c[0].cr);
|
||||
sync();
|
||||
__raw_writeb(chip, &im->i2c[0].dr);
|
||||
si_wait_i2c();
|
||||
|
||||
__raw_writeb(0xb0, &im->i2c[0].cr);
|
||||
sync();
|
||||
__raw_writeb(ubyte, &im->i2c[0].dr);
|
||||
si_wait_i2c();
|
||||
|
||||
__raw_writeb(lbyte, &im->i2c[0].dr);
|
||||
si_wait_i2c();
|
||||
|
||||
__raw_writeb(0xb4, &im->i2c[0].cr);
|
||||
sync();
|
||||
__raw_writeb(chip + 1, &im->i2c[0].dr);
|
||||
si_wait_i2c();
|
||||
|
||||
__raw_writeb(0xa0, &im->i2c[0].cr);
|
||||
sync();
|
||||
|
||||
/*
|
||||
* Dummy read
|
||||
*/
|
||||
__raw_readb(&im->i2c[0].dr);
|
||||
|
||||
si_wait_i2c();
|
||||
|
||||
/*
|
||||
* Read actual data
|
||||
*/
|
||||
for (i = 0; i < count; i++)
|
||||
{
|
||||
if (i == (count - 2)) /* Reached next to last byte, No ACK */
|
||||
__raw_writeb(0xa8, &im->i2c[0].cr);
|
||||
if (i == (count - 1)) /* Reached last byte, STOP */
|
||||
__raw_writeb(0x88, &im->i2c[0].cr);
|
||||
|
||||
/* Read byte of data */
|
||||
buffer[i] = __raw_readb(&im->i2c[0].dr);
|
||||
|
||||
if (i == (count - 1))
|
||||
break;
|
||||
si_wait_i2c();
|
||||
}
|
||||
|
||||
return;
|
||||
}
|
||||
#endif /* CONFIG_NAND_SPL */
|
||||
|
||||
phys_size_t initdram(int board_type)
|
||||
{
|
||||
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
|
||||
volatile fsl_lbus_t *lbc= &im->lbus;
|
||||
u32 msize;
|
||||
|
||||
if ((__raw_readl(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32) im)
|
||||
return -1;
|
||||
|
||||
/* DDR SDRAM - Main SODIMM */
|
||||
__raw_writel(CONFIG_SYS_DDR_BASE & LAWBAR_BAR, &im->sysconf.ddrlaw[0].bar);
|
||||
|
||||
msize = fixed_sdram();
|
||||
|
||||
/* Local Bus setup lbcr and mrtpr */
|
||||
__raw_writel(CONFIG_SYS_LBC_LBCR, &lbc->lbcr);
|
||||
__raw_writel(CONFIG_SYS_LBC_MRTPR, &lbc->mrtpr);
|
||||
sync();
|
||||
|
||||
/* return total bus SDRAM size(bytes) -- DDR */
|
||||
return (msize * 1024 * 1024);
|
||||
}
|
||||
|
||||
/*************************************************************************
|
||||
* fixed sdram init -- reads values from boot sequencer I2C
|
||||
************************************************************************/
|
||||
static long fixed_sdram(void)
|
||||
{
|
||||
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
|
||||
u32 msizelog2, msize = 1;
|
||||
#if defined(CONFIG_NAND_SPL)
|
||||
u32 i;
|
||||
const u8 bytecount = 135;
|
||||
u8 buffer[bytecount];
|
||||
u32 addr, data;
|
||||
|
||||
si_read_i2c(0, bytecount, buffer);
|
||||
|
||||
for (i = 18; i < bytecount; i += 7){
|
||||
addr = (u32)buffer[i];
|
||||
addr <<= 8;
|
||||
addr |= (u32)buffer[i + 1];
|
||||
addr <<= 2;
|
||||
data = (u32)buffer[i + 2];
|
||||
data <<= 8;
|
||||
data |= (u32)buffer[i + 3];
|
||||
data <<= 8;
|
||||
data |= (u32)buffer[i + 4];
|
||||
data <<= 8;
|
||||
data |= (u32)buffer[i + 5];
|
||||
|
||||
__raw_writel(data, (u32 *)(CONFIG_SYS_IMMR + addr));
|
||||
}
|
||||
|
||||
sync();
|
||||
|
||||
/* enable DDR controller */
|
||||
__raw_writel((__raw_readl(&im->ddr.sdram_cfg) | SDRAM_CFG_MEM_EN), &im->ddr.sdram_cfg);
|
||||
#endif /* (CONFIG_NAND_SPL) */
|
||||
|
||||
msizelog2 = ((__raw_readl(&im->sysconf.ddrlaw[0].ar) & LAWAR_SIZE) + 1);
|
||||
msize <<= (msizelog2 - 20);
|
||||
|
||||
return msize;
|
||||
}
|
||||
134
board/sheldon/simpc8313/simpc8313.c
Normal file
134
board/sheldon/simpc8313/simpc8313.c
Normal file
@ -0,0 +1,134 @@
|
||||
/*
|
||||
* Copyright (C) Freescale Semiconductor, Inc. 2006-2007
|
||||
* Copyright (C) Sheldon Instruments, Inc. 2008
|
||||
*
|
||||
* Author: Ron Madrid <info@sheldoninst.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <libfdt.h>
|
||||
#include <pci.h>
|
||||
#include <mpc83xx.h>
|
||||
#include <ns16550.h>
|
||||
#include <nand.h>
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
int checkboard(void)
|
||||
{
|
||||
puts("Board: Sheldon Instruments SIMPC8313\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifndef CONFIG_NAND_SPL
|
||||
static struct pci_region pci_regions[] = {
|
||||
{
|
||||
bus_start: CONFIG_SYS_PCI1_MEM_BASE,
|
||||
phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
|
||||
size: CONFIG_SYS_PCI1_MEM_SIZE,
|
||||
flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
|
||||
},
|
||||
{
|
||||
bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
|
||||
phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
|
||||
size: CONFIG_SYS_PCI1_MMIO_SIZE,
|
||||
flags: PCI_REGION_MEM
|
||||
},
|
||||
{
|
||||
bus_start: CONFIG_SYS_PCI1_IO_BASE,
|
||||
phys_start: CONFIG_SYS_PCI1_IO_PHYS,
|
||||
size: CONFIG_SYS_PCI1_IO_SIZE,
|
||||
flags: PCI_REGION_IO
|
||||
}
|
||||
};
|
||||
|
||||
void pci_init_board(void)
|
||||
{
|
||||
volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
|
||||
volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
|
||||
volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
|
||||
struct pci_region *reg[] = { pci_regions };
|
||||
int warmboot;
|
||||
|
||||
/* Enable all 3 PCI_CLK_OUTPUTs. */
|
||||
clk->occr |= 0xe0000000;
|
||||
|
||||
/*
|
||||
* Configure PCI Local Access Windows
|
||||
*/
|
||||
pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
|
||||
pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
|
||||
|
||||
pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
|
||||
pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
|
||||
|
||||
warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM;
|
||||
|
||||
mpc83xx_pci_init(1, reg, warmboot);
|
||||
}
|
||||
|
||||
/*
|
||||
* Miscellaneous late-boot configurations
|
||||
*/
|
||||
int misc_init_r(void)
|
||||
{
|
||||
int rc = 0;
|
||||
|
||||
return rc;
|
||||
}
|
||||
|
||||
#if defined(CONFIG_OF_BOARD_SETUP)
|
||||
void ft_board_setup(void *blob, bd_t *bd)
|
||||
{
|
||||
ft_cpu_setup(blob, bd);
|
||||
#ifdef CONFIG_PCI
|
||||
ft_pci_setup(blob, bd);
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
#else /* CONFIG_NAND_SPL */
|
||||
void board_init_f(ulong bootflag)
|
||||
{
|
||||
NS16550_init((NS16550_t)(CONFIG_SYS_IMMR + 0x4500),
|
||||
CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
|
||||
puts("NAND boot... ");
|
||||
init_timebase();
|
||||
initdram(0);
|
||||
relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000, (gd_t *)gd,
|
||||
CONFIG_SYS_NAND_U_BOOT_RELOC);
|
||||
}
|
||||
|
||||
void board_init_r(gd_t *gd, ulong dest_addr)
|
||||
{
|
||||
nand_boot();
|
||||
}
|
||||
|
||||
void putc(char c)
|
||||
{
|
||||
if (gd->flags & GD_FLG_SILENT)
|
||||
return;
|
||||
|
||||
if (c == '\n')
|
||||
NS16550_putc((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), '\r');
|
||||
|
||||
NS16550_putc((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), c);
|
||||
}
|
||||
#endif
|
||||
80
doc/README.simpc8313
Normal file
80
doc/README.simpc8313
Normal file
@ -0,0 +1,80 @@
|
||||
Sheldon Instruments SIMPC8313 Board
|
||||
-----------------------------------------
|
||||
|
||||
1. Board Switches and Jumpers
|
||||
|
||||
S2 is used to set CFG_RESET_SOURCE.
|
||||
|
||||
To boot the image in Large page NAND flash, use these DIP
|
||||
switch settings for S2:
|
||||
|
||||
+----------+ ON
|
||||
| * * **** |
|
||||
| * * |
|
||||
+----------+
|
||||
12345678
|
||||
|
||||
To boot the image in Small page NAND flash, use these DIP
|
||||
switch settings for S2:
|
||||
|
||||
+----------+ ON
|
||||
| *** **** |
|
||||
| * |
|
||||
+----------+
|
||||
12345678
|
||||
(where the '*' indicates the position of the tab of the switch.)
|
||||
|
||||
2. Memory Map
|
||||
The memory map looks like this:
|
||||
|
||||
0x0000_0000 0x1fff_ffff DDR 512M
|
||||
0x8000_0000 0x8fff_ffff PCI MEM 256M
|
||||
0x9000_0000 0x9fff_ffff PCI_MMIO 256M
|
||||
0xe000_0000 0xe00f_ffff IMMR 1M
|
||||
0xe200_0000 0xe20f_ffff PCI IO 16M
|
||||
0xe280_0000 0xe280_7fff NAND FLASH (CS0) 32K
|
||||
or
|
||||
0xe280_0000 0xe281_ffff NAND FLASH (CS0) 128K
|
||||
0xff00_0000 0xff00_7fff FPGA (CS1) 1M
|
||||
|
||||
3. Compilation
|
||||
|
||||
Assuming you're using BASH (or similar) as your shell:
|
||||
|
||||
export CROSS_COMPILE=your-cross-compiler-prefix-
|
||||
make distclean
|
||||
make SIMPC8313_LP_config
|
||||
(or make SIMPC8313_SP_config, depending on the page size
|
||||
of your NAND flash)
|
||||
make
|
||||
|
||||
4. Downloading and Flashing Images
|
||||
|
||||
4.1 Reflash U-boot Image using U-boot
|
||||
|
||||
=>run update_uboot
|
||||
|
||||
You may want to try
|
||||
=>tftp $loadaddr $uboot
|
||||
first, to make sure that the TFTP load will succeed before it
|
||||
goes ahead and wipes out your current firmware. And of course,
|
||||
if the new u-boot doesn't boot, you can plug the board into
|
||||
your PCI slot and with the supplied driver and sample app
|
||||
you can reburn a working u-boot.
|
||||
|
||||
4.2 Downloading and Booting Linux Kernel
|
||||
|
||||
Ensure that all networking-related environment variables are set
|
||||
properly (including ipaddr, serverip, gatewayip (if needed),
|
||||
netmask, ethaddr, eth1addr, fdtfile, and bootfile).
|
||||
|
||||
=>tftp $loadaddr uImage
|
||||
=>nand write $loadaddr kernel $filesize
|
||||
=>tftp $loadaddr $fdtfile
|
||||
=>nand write $loadaddr 7e0000 1800
|
||||
|
||||
=>boot
|
||||
|
||||
5 Notes
|
||||
|
||||
The console baudrate for SIMPC8313 is 115200bps.
|
||||
544
include/configs/SIMPC8313.h
Normal file
544
include/configs/SIMPC8313.h
Normal file
@ -0,0 +1,544 @@
|
||||
/*
|
||||
* Copyright (C) Sheldon Instruments, Inc. 2008
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
/*
|
||||
* simpc8313 board configuration file
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/*
|
||||
* High Level Configuration Options
|
||||
*/
|
||||
#define CONFIG_NAND_U_BOOT
|
||||
|
||||
#define CONFIG_E300 1
|
||||
#define CONFIG_MPC83XX 1
|
||||
#define CONFIG_MPC831X 1
|
||||
#define CONFIG_MPC8313 1
|
||||
|
||||
#define CONFIG_PCI
|
||||
#define CONFIG_83XX_GENERIC_PCI
|
||||
|
||||
#define CONFIG_MISC_INIT_R
|
||||
|
||||
/*
|
||||
* On-board devices
|
||||
*
|
||||
* TSEC1 is Marvell PHY 88E1118
|
||||
*/
|
||||
|
||||
#define CONFIG_SYS_33MHZ
|
||||
|
||||
#define CONFIG_83XX_CLKIN 33333333 /* in Hz */
|
||||
|
||||
#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN
|
||||
|
||||
#define CONFIG_SYS_IMMR 0xE0000000
|
||||
|
||||
#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
|
||||
#define CONFIG_DEFAULT_IMMR CONFIG_SYS_IMMR
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START 0x00001000
|
||||
#define CONFIG_SYS_MEMTEST_END 0x07f00000
|
||||
|
||||
#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */
|
||||
#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */
|
||||
|
||||
/*
|
||||
* Device configurations
|
||||
*/
|
||||
#define CONFIG_TSEC1
|
||||
|
||||
/*
|
||||
* DDR Setup
|
||||
*/
|
||||
#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/
|
||||
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
|
||||
#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
|
||||
|
||||
#define CONFIG_VERY_BIG_RAM
|
||||
#define CONFIG_MAX_MEM_MAPPED (512 << 20)
|
||||
|
||||
#define CONFIG_SYS_DDRCDR ( DDRCDR_EN \
|
||||
| DDRCDR_PZ_NOMZ \
|
||||
| DDRCDR_NZ_NOMZ \
|
||||
| DDRCDR_M_ODR )
|
||||
/* 0x73000002 TODO ODR & DRN ? */
|
||||
|
||||
/*
|
||||
* FLASH on the Local Bus
|
||||
*/
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
|
||||
#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
|
||||
|
||||
#if !defined(CONFIG_NAND_SPL)
|
||||
#define CONFIG_SYS_RAMBOOT
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_INIT_RAM_LOCK 1
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */
|
||||
#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM*/
|
||||
|
||||
#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */
|
||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
||||
|
||||
/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
|
||||
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
|
||||
#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
|
||||
|
||||
/*
|
||||
* Local Bus LCRR and LBCR regs
|
||||
*/
|
||||
#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_EADC_1 | LCRR_CLKDIV_2)
|
||||
#define CONFIG_SYS_LBC_LBCR (0x00040000 /* TODO */ \
|
||||
| (0xFF << LBCR_BMT_SHIFT) \
|
||||
| 0xF ) /* 0x0004ff0f */
|
||||
|
||||
#define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */
|
||||
|
||||
/* drivers/mtd/nand/nand.c */
|
||||
#ifdef CONFIG_NAND_SPL
|
||||
#define CONFIG_SYS_NAND_BASE 0xFFF00000
|
||||
#else
|
||||
#define CONFIG_SYS_NAND_BASE 0xE2800000
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
#define NAND_MAX_CHIPS 1
|
||||
#define CONFIG_MTD_NAND_VERIFY_WRITE
|
||||
#define CONFIG_CMD_NAND 1
|
||||
#define CONFIG_NAND_FSL_ELBC 1
|
||||
|
||||
#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10)
|
||||
#define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000
|
||||
#define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
|
||||
#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
|
||||
|
||||
#define CONFIG_SYS_NAND_BR_PRELIM ( CONFIG_SYS_NAND_BASE \
|
||||
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
|
||||
| BR_PS_8 /* Port Size = 8 bit */ \
|
||||
| BR_MS_FCM /* MSEL = FCM */ \
|
||||
| BR_V ) /* valid */
|
||||
|
||||
#ifdef CONFIG_NAND_SP
|
||||
#define CONFIG_SYS_NAND_OR_PRELIM ( 0xFFFF8000 /* length 32K */ \
|
||||
| OR_FCM_CSCT \
|
||||
| OR_FCM_CST \
|
||||
| OR_FCM_CHT \
|
||||
| OR_FCM_SCY_1 \
|
||||
| OR_FCM_TRLX \
|
||||
| OR_FCM_EHTR )
|
||||
#define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000000E /* 32KB */
|
||||
#define CONFIG_SYS_NAND_PAGE_SIZE (512) /* NAND chip page size */
|
||||
#define CONFIG_SYS_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */
|
||||
#define NAND_CACHE_PAGES 32
|
||||
#elif defined(CONFIG_NAND_LP)
|
||||
#define CONFIG_SYS_NAND_OR_PRELIM ( 0xFFFC0000 /* length 256K */ \
|
||||
| OR_FCM_PGS \
|
||||
| OR_FCM_CSCT \
|
||||
| OR_FCM_CST \
|
||||
| OR_FCM_CHT \
|
||||
| OR_FCM_SCY_1 \
|
||||
| OR_FCM_TRLX \
|
||||
| OR_FCM_EHTR )
|
||||
#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000011 /* 256KB */
|
||||
#define CONFIG_SYS_NAND_PAGE_SIZE (2048) /* NAND chip page size */
|
||||
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) /* NAND chip block size */
|
||||
#define NAND_CACHE_PAGES 64
|
||||
#else
|
||||
#error Page size of NAND not defined.
|
||||
#endif /* CONFIG_NAND_SP */
|
||||
|
||||
#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SYS_NAND_BLOCK_SIZE
|
||||
|
||||
#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM
|
||||
#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM
|
||||
|
||||
#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_NAND_BASE
|
||||
|
||||
#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR0_PRELIM
|
||||
#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR0_PRELIM
|
||||
|
||||
/*
|
||||
* JFFS2 configuration
|
||||
*/
|
||||
#define CONFIG_JFFS2_NAND
|
||||
#define CONFIG_JFFS2_DEV "nand0"
|
||||
|
||||
/* mtdparts command line support */
|
||||
#define CONFIG_JFFS2_CMDLINE
|
||||
#define MTDIDS_DEFAULT "nand0=nand0"
|
||||
#define MTDPARTS_DEFAULT "mtdparts=nand0:2M(u-boot),6M(kernel),-(jffs2)"
|
||||
|
||||
/* pass open firmware flat tree */
|
||||
#define CONFIG_OF_LIBFDT 1
|
||||
#define CONFIG_OF_BOARD_SETUP 1
|
||||
#define CONFIG_OF_STDOUT_VIA_ALIAS 1
|
||||
|
||||
/*
|
||||
* Serial Port
|
||||
*/
|
||||
#define CONFIG_CONS_INDEX 1
|
||||
#define CONFIG_SYS_NS16550
|
||||
#define CONFIG_SYS_NS16550_SERIAL
|
||||
#define CONFIG_SYS_NS16550_REG_SIZE 1
|
||||
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE \
|
||||
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
|
||||
|
||||
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
|
||||
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
|
||||
|
||||
/* Use the HUSH parser */
|
||||
#define CONFIG_SYS_HUSH_PARSER
|
||||
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
||||
|
||||
/* I2C */
|
||||
#define CONFIG_HARD_I2C /* I2C with hardware support*/
|
||||
#define CONFIG_FSL_I2C
|
||||
#define CONFIG_I2C_MULTI_BUS
|
||||
#define CONFIG_I2C_CMD_TREE
|
||||
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
|
||||
#define CONFIG_SYS_I2C_SLAVE 0x7F
|
||||
#define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */
|
||||
#define CONFIG_SYS_I2C_OFFSET 0x3000
|
||||
#define CONFIG_SYS_I2C2_OFFSET 0x3100
|
||||
|
||||
/*
|
||||
* General PCI
|
||||
* Addresses are mapped 1-1.
|
||||
*/
|
||||
#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
|
||||
#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
|
||||
#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */
|
||||
#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000
|
||||
#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE
|
||||
#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */
|
||||
#define CONFIG_SYS_PCI1_IO_BASE 0x00000000
|
||||
#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
|
||||
#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */
|
||||
|
||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
|
||||
|
||||
/*
|
||||
* TSEC
|
||||
*/
|
||||
#define CONFIG_TSEC_ENET /* TSEC ethernet support */
|
||||
|
||||
#define CONFIG_NET_MULTI
|
||||
#define CONFIG_GMII /* MII PHY management */
|
||||
|
||||
#ifdef CONFIG_TSEC1
|
||||
#define CONFIG_HAS_ETH0
|
||||
#define CONFIG_TSEC1_NAME "TSEC0"
|
||||
#define CONFIG_SYS_TSEC1_OFFSET 0x24000
|
||||
#define TSEC1_PHY_ADDR 0x0
|
||||
#define TSEC1_FLAGS TSEC_GIGABIT
|
||||
#define TSEC1_PHYIDX 0
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_TSEC2
|
||||
#define CONFIG_HAS_ETH1
|
||||
#define CONFIG_TSEC2_NAME "TSEC1"
|
||||
#define CONFIG_SYS_TSEC2_OFFSET 0x25000
|
||||
#define TSEC2_PHY_ADDR 4
|
||||
#define TSEC2_FLAGS TSEC_GIGABIT
|
||||
#define TSEC2_PHYIDX 0
|
||||
#endif
|
||||
|
||||
|
||||
/* Options are: TSEC[0-1] */
|
||||
#define CONFIG_ETHPRIME "TSEC1"
|
||||
|
||||
/*
|
||||
* Configure on-board RTC
|
||||
*/
|
||||
#define CONFIG_RTC_DS1337
|
||||
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
||||
|
||||
/*
|
||||
* Environment
|
||||
*/
|
||||
#if defined(CONFIG_NAND_U_BOOT)
|
||||
#define CONFIG_ENV_IS_IN_NAND 1
|
||||
#define CONFIG_ENV_OFFSET (768 * 1024)
|
||||
#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
|
||||
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
|
||||
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
|
||||
#define CONFIG_ENV_RANGE (CONFIG_ENV_SECT_SIZE * 4)
|
||||
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
|
||||
#elif !defined(CONFIG_SYS_RAMBOOT)
|
||||
#define CONFIG_ENV_IS_IN_FLASH 1
|
||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
|
||||
#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
|
||||
/* Address and size of Redundant Environment Sector */
|
||||
#else
|
||||
#define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
|
||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
#endif
|
||||
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||||
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
#undef CONFIG_CMD_IMLS
|
||||
#undef CONFIG_CMD_FLASH
|
||||
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_I2C
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_CMD_DATE
|
||||
#define CONFIG_CMD_PCI
|
||||
#define CONFIG_CMD_JFFS2
|
||||
|
||||
#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT)
|
||||
#undef CONFIG_CMD_ENV
|
||||
#undef CONFIG_CMD_LOADS
|
||||
#endif
|
||||
|
||||
#define CONFIG_CMDLINE_EDITING 1
|
||||
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
|
||||
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
|
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
|
||||
#define CONFIG_SYS_PBSIZE ( CONFIG_SYS_CBSIZE \
|
||||
+ sizeof(CONFIG_SYS_PROMPT) \
|
||||
+ 16 ) /* Print Buffer Size */
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
||||
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
|
||||
|
||||
#define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */
|
||||
|
||||
#define CONFIG_SYS_HRCW_LOW ( HRCWL_LCL_BUS_TO_SCB_CLK_1X1 \
|
||||
| 0x20000000 /* reserved */ \
|
||||
| HRCWL_DDR_TO_SCB_CLK_2X1 \
|
||||
| HRCWL_CSB_TO_CLKIN_4X1 \
|
||||
| HRCWL_CORE_TO_CSB_2_5X1 )
|
||||
|
||||
#define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 4)
|
||||
|
||||
#define CONFIG_SYS_HRCW_HIGH_BASE ( HRCWH_PCI_HOST \
|
||||
| HRCWH_PCI1_ARBITER_ENABLE \
|
||||
| HRCWH_CORE_ENABLE \
|
||||
| HRCWH_BOOTSEQ_DISABLE \
|
||||
| HRCWH_SW_WATCHDOG_DISABLE \
|
||||
| HRCWH_TSEC1M_IN_RGMII \
|
||||
| HRCWH_TSEC2M_IN_RGMII \
|
||||
| HRCWH_BIG_ENDIAN \
|
||||
| HRCWH_LALE_NORMAL )
|
||||
|
||||
#ifdef CONFIG_NAND_LP
|
||||
#define CONFIG_SYS_HRCW_HIGH ( CONFIG_SYS_HRCW_HIGH_BASE \
|
||||
| HRCWH_FROM_0XFFF00100 \
|
||||
| HRCWH_ROM_LOC_NAND_LP_8BIT \
|
||||
| HRCWH_RL_EXT_NAND)
|
||||
#else
|
||||
#define CONFIG_SYS_HRCW_HIGH ( CONFIG_SYS_HRCW_HIGH_BASE \
|
||||
| HRCWH_FROM_0XFFF00100 \
|
||||
| HRCWH_ROM_LOC_NAND_SP_8BIT \
|
||||
| HRCWH_RL_EXT_NAND )
|
||||
#endif
|
||||
|
||||
/* System IO Config */
|
||||
#define CONFIG_SYS_SICRH ( SICRH_ETSEC2_B \
|
||||
| SICRH_ETSEC2_C \
|
||||
| SICRH_ETSEC2_D \
|
||||
| SICRH_ETSEC2_E \
|
||||
| SICRH_ETSEC2_F \
|
||||
| SICRH_ETSEC2_G \
|
||||
| SICRH_TSOBI1 \
|
||||
| SICRH_TSOBI2 )
|
||||
#define CONFIG_SYS_SICRL (SICRL_USBDR \
|
||||
| SICRL_ETSEC2_A )
|
||||
|
||||
#define CONFIG_SYS_HID0_INIT 0x000000000
|
||||
#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK \
|
||||
| HID0_ENABLE_DYNAMIC_POWER_MANAGMENT )
|
||||
|
||||
#define CONFIG_SYS_HID2 HID2_HBE
|
||||
|
||||
#define CONFIG_HIGH_BATS 1 /* High BATs supported */
|
||||
|
||||
/* DDR @ 0x00000000 */
|
||||
#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10)
|
||||
#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
||||
#define CONFIG_SYS_IBAT1L ((CONFIG_SYS_SDRAM_BASE + 0x10000000) | BATL_PP_10)
|
||||
#define CONFIG_SYS_IBAT1U ((CONFIG_SYS_SDRAM_BASE + 0x10000000) | BATU_BL_256M | BATU_VS | BATU_VP)
|
||||
|
||||
/* PCI @ 0x80000000 */
|
||||
#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10)
|
||||
#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
||||
#define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
||||
|
||||
/* PCI2 not supported on 8313 */
|
||||
#define CONFIG_SYS_IBAT4L (0)
|
||||
#define CONFIG_SYS_IBAT4U (0)
|
||||
|
||||
/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */
|
||||
#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
||||
#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
|
||||
|
||||
/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
|
||||
#define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_10)
|
||||
#define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
|
||||
|
||||
#define CONFIG_SYS_IBAT7L (0)
|
||||
#define CONFIG_SYS_IBAT7U (0)
|
||||
|
||||
#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
|
||||
#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
|
||||
#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
|
||||
#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
|
||||
#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
|
||||
#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
|
||||
#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
|
||||
#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
|
||||
#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L
|
||||
#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
|
||||
#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
|
||||
#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
|
||||
#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
|
||||
#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
|
||||
#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
|
||||
#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
|
||||
|
||||
/*
|
||||
* Internal Definitions
|
||||
*
|
||||
* Boot Flags
|
||||
*/
|
||||
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||
|
||||
/*
|
||||
* Environment Configuration
|
||||
*/
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
|
||||
#define CONFIG_NETDEV eth1
|
||||
|
||||
#define CONFIG_HOSTNAME simpc8313
|
||||
#define CONFIG_ROOTPATH /tftpboot/
|
||||
#define CONFIG_BOOTFILE /tftpboot/uImage
|
||||
#define CONFIG_UBOOTPATH u-boot-nand.bin /* U-Boot image on TFTP server */
|
||||
#define CONFIG_FDTFILE simpc8313.dtb
|
||||
|
||||
#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */
|
||||
#define CONFIG_BOOTDELAY 5 /* 5 second delay */
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#define CONFIG_BOOTCOMMAND "nand read $loadaddr kernel 600000;bootm $loadaddr - $fdtaddr"
|
||||
|
||||
#define XMK_STR(x) #x
|
||||
#define MK_STR(x) XMK_STR(x)
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"netdev=" MK_STR(CONFIG_NETDEV) "\0" \
|
||||
"ethprime=TSEC1\0" \
|
||||
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
|
||||
"tftpflash=tftpboot $loadaddr $uboot; " \
|
||||
"protect off " MK_STR(TEXT_BASE) " +$filesize; " \
|
||||
"erase " MK_STR(TEXT_BASE) " +$filesize; " \
|
||||
"cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
|
||||
"protect on " MK_STR(TEXT_BASE) " +$filesize; " \
|
||||
"cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
|
||||
"fdtaddr=ae0000\0" \
|
||||
"fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" \
|
||||
"console=ttyS0\0" \
|
||||
"setbootargs=setenv bootargs " \
|
||||
"root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
|
||||
"setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \
|
||||
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
|
||||
"root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
|
||||
"load_uboot=tftp 100000 u-boot-nand.bin\0" \
|
||||
"burn_uboot=nand erase u-boot 80000; " \
|
||||
"nand write 100000 u-boot $filesize\0" \
|
||||
"update_uboot=run load_uboot;run burn_uboot\0" \
|
||||
"mtdids=nand0=nand0\0" \
|
||||
"mtdparts=mtdparts=nand0:2M(u-boot),6M(kernel),-(jffs2)\0" \
|
||||
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=${serverip}:${rootpath}\0" \
|
||||
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
||||
"addip=setenv bootargs ${bootargs} " \
|
||||
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
||||
":${hostname}:${netdev}:off panic=1\0" \
|
||||
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
|
||||
"bootargs=root=/dev/mtdblock2 rootfstype=jffs2 rw " \
|
||||
"console=ttyS0,115200\0" \
|
||||
""
|
||||
|
||||
#define CONFIG_NFSBOOTCOMMAND \
|
||||
"setenv rootdev /dev/nfs;" \
|
||||
"run setbootargs;" \
|
||||
"run setipargs;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"tftp $fdtaddr $fdtfile;" \
|
||||
"bootm $loadaddr - $fdtaddr"
|
||||
|
||||
#define CONFIG_RAMBOOTCOMMAND \
|
||||
"setenv rootdev /dev/ram;" \
|
||||
"run setbootargs;" \
|
||||
"tftp $ramdiskaddr $ramdiskfile;" \
|
||||
"tftp $loadaddr $bootfile;" \
|
||||
"tftp $fdtaddr $fdtfile;" \
|
||||
"bootm $loadaddr $ramdiskaddr $fdtaddr"
|
||||
|
||||
#undef MK_STR
|
||||
#undef XMK_STR
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
100
nand_spl/board/sheldon/simpc8313/Makefile
Normal file
100
nand_spl/board/sheldon/simpc8313/Makefile
Normal file
@ -0,0 +1,100 @@
|
||||
#
|
||||
# (C) Copyright 2007
|
||||
# Stefan Roese, DENX Software Engineering, sr@denx.de.
|
||||
# (C) Copyright 2008 Freescale Semiconductor
|
||||
# (C) Copyright Sheldon Instruments, Inc. 2008
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
NAND_SPL := y
|
||||
TEXT_BASE := 0xfff00000
|
||||
|
||||
include $(TOPDIR)/config.mk
|
||||
|
||||
LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
|
||||
LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
|
||||
AFLAGS += -DCONFIG_NAND_SPL
|
||||
CFLAGS += -DCONFIG_NAND_SPL
|
||||
|
||||
SOBJS = start.o ticks.o
|
||||
COBJS = nand_boot_fsl_elbc.o $(BOARD).o sdram.o ns16550.o nand_init.o time.o
|
||||
|
||||
SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
|
||||
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
|
||||
__OBJS := $(SOBJS) $(COBJS)
|
||||
LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR)
|
||||
|
||||
nandobj := $(OBJTREE)/nand_spl/
|
||||
|
||||
ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
|
||||
|
||||
all: $(obj).depend $(ALL)
|
||||
|
||||
$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
|
||||
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
|
||||
|
||||
$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
|
||||
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
|
||||
|
||||
$(nandobj)u-boot-spl: $(OBJS)
|
||||
cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \
|
||||
-Map $(nandobj)u-boot-spl.map \
|
||||
-o $(nandobj)u-boot-spl
|
||||
|
||||
# create symbolic links for common files
|
||||
|
||||
$(obj)start.S:
|
||||
ln -sf $(SRCTREE)/cpu/mpc83xx/start.S $<
|
||||
|
||||
$(obj)nand_boot_fsl_elbc.c:
|
||||
ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c $<
|
||||
|
||||
$(obj)sdram.c:
|
||||
ln -sf $(SRCTREE)/board/$(BOARDDIR)/sdram.c $<
|
||||
|
||||
$(obj)$(BOARD).c:
|
||||
ln -sf $(SRCTREE)/board/$(BOARDDIR)/$(BOARD).c $<
|
||||
|
||||
$(obj)ns16550.c:
|
||||
ln -sf $(SRCTREE)/drivers/serial/ns16550.c $<
|
||||
|
||||
$(obj)nand_init.c:
|
||||
ln -sf $(SRCTREE)/cpu/mpc83xx/nand_init.c $<
|
||||
|
||||
$(obj)time.c:
|
||||
ln -sf $(SRCTREE)/lib_ppc/time.c $<
|
||||
|
||||
$(obj)ticks.S:
|
||||
ln -sf $(SRCTREE)/lib_ppc/ticks.S $<
|
||||
|
||||
#########################################################################
|
||||
|
||||
$(obj)%.o: $(obj)%.S
|
||||
$(CC) $(AFLAGS) -c -o $@ $<
|
||||
|
||||
$(obj)%.o: $(obj)%.c
|
||||
$(CC) $(CFLAGS) -c -o $@ $<
|
||||
|
||||
# defines $(obj).depend target
|
||||
include $(SRCTREE)/rules.mk
|
||||
|
||||
sinclude $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
52
nand_spl/board/sheldon/simpc8313/u-boot.lds
Normal file
52
nand_spl/board/sheldon/simpc8313/u-boot.lds
Normal file
@ -0,0 +1,52 @@
|
||||
/*
|
||||
* (C) Copyright 2006
|
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
*
|
||||
* Copyright 2008 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
OUTPUT_ARCH(powerpc)
|
||||
SECTIONS
|
||||
{
|
||||
. = 0xfff00000;
|
||||
.text : {
|
||||
*(.text*)
|
||||
. = ALIGN(16);
|
||||
*(.rodata*)
|
||||
*(.eh_frame)
|
||||
}
|
||||
|
||||
. = ALIGN(8);
|
||||
.data : {
|
||||
*(.data*)
|
||||
*(.sdata*)
|
||||
_GOT2_TABLE_ = .;
|
||||
*(.got2)
|
||||
__got2_entries = (. - _GOT2_TABLE_) >> 2;
|
||||
}
|
||||
|
||||
. = ALIGN(8);
|
||||
__bss_start = .;
|
||||
.bss (NOLOAD) : { *(.*bss) }
|
||||
_end = .;
|
||||
}
|
||||
ENTRY(_start)
|
||||
ASSERT(_end <= 0xfff01000, "NAND bootstrap too big");
|
||||
Loading…
Reference in New Issue
Block a user