arm64: ls1043ardb: Add distro boot support

Include common config_distro_defaults.h and config_distro_bootcmd.h
for u-boot enviroments to support automatical distro boot which
scan boot.scr from external storage devices(e.g. SD/USB/SATA/SCSI disk)
and execute autoboot script. Tested on ls1043ardb with automatically
boot Ubuntu from SD card or USB disk, if it fails to detect external
storage disk, fall back to nor/qspi boot.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

configs/ls1043ardb_defconfig

@@ -37,3 +37,4 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
+CONFIG_DISTRO_DEFAULTS=y

configs/ls1043ardb_sdcard_defconfig

@@ -52,3 +52,4 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
+CONFIG_DISTRO_DEFAULTS=y

include/configs/ls1043a_common.h

@@ -259,29 +259,62 @@
 			"5m(kernel),1m(dtb),9m(file_system)"
 #endif
 
+#include <config_distro_defaults.h>
+#ifndef CONFIG_SPL_BUILD
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(USB, usb, 0)
+#include <config_distro_bootcmd.h>
+#endif
+
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
-	"loadaddr=0x80100000\0"			\
 	"fdt_high=0xffffffffffffffff\0"		\
 	"initrd_high=0xffffffffffffffff\0"	\
-	"kernel_start=0x61100000\0"		\
+	"fdt_addr=0x64f00000\0"		 	\
-	"kernel_load=0xa0000000\0"		\
+	"kernel_addr=0x65000000\0"		\
+	"scriptaddr=0x80000000\0"		\
+	"fdtheader_addr_r=0x80100000\0"		\
+	"kernelheader_addr_r=0x80200000\0"	\
+	"kernel_addr_r=0x81000000\0"		\
+	"fdt_addr_r=0x90000000\0"		\
+	"load_addr=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
-	"console=ttyS0,115200\0"                \
+	"console=ttyS0,115200\0"		\
-	"mtdparts=" MTDPARTS_DEFAULT "\0"
+	"mtdparts=" MTDPARTS_DEFAULT "\0"	\
+	BOOTENV					\
+	"boot_scripts=ls1043ardb_boot.scr\0"	\
+	"scan_dev_for_boot_part="		\
+		"part list ${devtype} ${devnum} devplist; "	\
+		"env exists devplist || setenv devplist 1; "	\
+		"for distro_bootpart in ${devplist}; do "	\
+			"if fstype ${devtype} "			\
+				"${devnum}:${distro_bootpart} "	\
+				"bootfstype; then "		\
+				"run scan_dev_for_boot; "	\
+			"fi; "					\
+		"done\0"			\
+	"installer=load mmc 0:2 $load_addr "	\
+		"/flex_installer_arm64.itb; "	\
+		"bootm $load_addr#ls1043ardb\0"	\
+	"qspi_bootcmd=echo Trying load from qspi..;"	\
+		"sf probe && sf read $load_addr "	\
+		"$kernel_addr $kernel_size && bootm $load_addr#$board\0" \
+	"nor_bootcmd=echo Trying load from nor..;"	\
+		"cp.b $kernel_addr $load_addr "	\
+		"$kernel_size && bootm $load_addr#$board\0"
+
+#undef CONFIG_BOOTCOMMAND
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd"
+#else
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run nor_bootcmd"
+#endif
 
 #define CONFIG_BOOTARGS			"console=ttyS0,115200 root=/dev/ram0 " \
 					"earlycon=uart8250,mmio,0x21c0500 "    \
 					MTDPARTS_DEFAULT
-
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_BOOTCOMMAND		"sf probe && sf read $kernel_load "    \
-					"e0000 f00000 && bootm $kernel_load"
-#else
-#define CONFIG_BOOTCOMMAND		"cp.b $kernel_start $kernel_load "     \
-					"$kernel_size && bootm $kernel_load"
-#endif
 #endif
 
 /* Monitor Command Prompt */
@@ -292,8 +325,10 @@
 #define CONFIG_SYS_LONGHELP
 
 #ifndef SPL_NO_MISC
+#ifndef CONFIG_CMDLINE_EDITING
 #define CONFIG_CMDLINE_EDITING		1
 #endif
+#endif
 
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_MAXARGS		64	/* max command args */