imx: imx8qm-rom7720: switch to binman

Switch to use binman to pack images

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
This commit is contained in:
Oliver Graute 2022-11-04 16:03:37 +01:00 committed by Stefano Babic
parent 20cc70a84f
commit 55be8433d5
6 changed files with 140 additions and 5 deletions

View File

@ -10,6 +10,7 @@
/memreserve/ 0x80000000 0x00020000;
#include "fsl-imx8qm.dtsi"
#include "imx8qm-u-boot.dtsi"
/ {
model = "Advantech iMX8QM Qseven series";

View File

@ -0,0 +1,133 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2021 NXP
*/
/ {
binman: binman {
multiple-images;
};
};
&binman {
u-boot-spl-ddr {
align = <4>;
align-size = <4>;
filename = "u-boot-spl-ddr.bin";
pad-byte = <0xff>;
u-boot-spl {
align-end = <4>;
filename = "u-boot-spl.bin";
};
};
spl {
filename = "spl.bin";
mkimage {
args = "-n spl/u-boot-spl.cfgout -T imx8image -e 0x100000";
blob {
filename = "u-boot-spl-ddr.bin";
};
};
};
itb {
filename = "u-boot.itb";
fit {
description = "Configuration to load ATF before U-Boot";
fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
fit,fdt-list = "of-list";
#address-cells = <1>;
images {
uboot {
arch = "arm64";
compression = "none";
description = "U-Boot (64-bit)";
load = <CONFIG_SYS_TEXT_BASE>;
type = "standalone";
uboot-blob {
filename = "u-boot-nodtb.bin";
type = "blob-ext";
};
};
atf {
arch = "arm64";
compression = "none";
description = "ARM Trusted Firmware";
entry = <0x00910000>;
load = <0x00091000>;
type = "firmware";
atf-blob {
filename = "bl31.bin";
type = "atf-bl31";
};
};
scfw {
arch = "arm64";
compression = "none";
description = "System Controler Firmware";
type = "firmware";
scfw_blob {
filename = "mx8qm-val-scfw-tcm.bin";
type = "blob-ext";
};
};
seco {
arch = "arm64";
compression = "none";
description = "Seco Firmware";
type = "firmware";
seco_blob {
filename = "mx8qm-ahab-container.img";
type = "blob-ext";
};
};
@fdt-SEQ {
compression = "none";
description = "NAME";
type = "flat_dt";
uboot-fdt-blob {
filename = "u-boot.dtb";
type = "blob-ext";
};
};
};
configurations {
default = "@config-DEFAULT-SEQ";
binman_configuration: @config-SEQ {
description = "NAME";
fdt = "fdt-SEQ";
firmware = "uboot";
loadables = "atf";
};
};
};
};
imx-boot {
filename = "flash.bin";
pad-byte = <0x00>;
spl {
filename = "spl.bin";
offset = <0x0>;
type = "blob-ext";
};
};
};

View File

@ -82,6 +82,7 @@ config TARGET_CONGA_QMX8
config TARGET_IMX8QM_ROM7720_A1
bool "Support i.MX8QM ROM-7720-A1"
select BINMAN
select BOARD_LATE_INIT
select SUPPORT_SPL
select IMX8QM

View File

@ -4,8 +4,8 @@
*/
/* Boot from SD, sector size 0x400 */
BOOT_FROM SD 0x400
BOOT_FROM sd
/* SoC type IMX8QM */
SOC_TYPE IMX8QM
/* Append seco container image */

View File

@ -20,8 +20,9 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_REMAKE_ELF=y
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi"

View File

@ -57,8 +57,7 @@ Build U-Boot
$ export ATF_LOAD_ADDR=0x80000000
$ export BL33_LOAD_ADDR=0x80020000
$ make imx8qm_rom7720_a1_4G_defconfig
$ make u-boot.bin
$ make flash.bin
$ make
Flash the binary into the SD card
---------------------------------