MPC512x: add support for ARIA board
ARIA is a MPC5121E based COM Express module by Dave/DENX. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: John Rigby <jcrigby@gmail.com>
This commit is contained in:
Wolfgang Denk
parent
3b74e7ec58
commit
52568c3654
@ -75,6 +75,8 @@ Wolfgang Denk <wd@denx.de>
|
||||
IceCube_5100 MGT5100
|
||||
IceCube_5200 MPC5200
|
||||
|
||||
ARIA MPC5121e
|
||||
|
||||
AMX860 MPC860
|
||||
ETX094 MPC850
|
||||
FPS850L MPC850
|
||||
|
||||
1
MAKEALL
1
MAKEALL
@ -77,6 +77,7 @@ LIST_5xxx=" \
|
||||
#########################################################################
|
||||
|
||||
LIST_512x=" \
|
||||
aria \
|
||||
mpc5121ads \
|
||||
"
|
||||
|
||||
|
||||
4
Makefile
4
Makefile
@ -821,6 +821,9 @@ v38b_config: unconfig
|
||||
## MPC512x Systems
|
||||
#########################################################################
|
||||
|
||||
aria_config: unconfig
|
||||
@$(MKCONFIG) -a aria ppc mpc512x aria davedenx
|
||||
|
||||
mpc5121ads_config \
|
||||
mpc5121ads_rev2_config \
|
||||
: unconfig
|
||||
@ -830,7 +833,6 @@ mpc5121ads_rev2_config \
|
||||
fi
|
||||
@$(MKCONFIG) -a mpc5121ads ppc mpc512x mpc5121ads freescale
|
||||
|
||||
|
||||
#########################################################################
|
||||
## MPC8xx Systems
|
||||
#########################################################################
|
||||
|
||||
50
board/davedenx/aria/Makefile
Normal file
50
board/davedenx/aria/Makefile
Normal file
@ -0,0 +1,50 @@
|
||||
#
|
||||
# (C) Copyright 2009 Wolfgang Denk <wd@denx.de>
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk
|
||||
|
||||
LIB = $(obj)lib$(BOARD).a
|
||||
|
||||
COBJS-y := $(BOARD).o
|
||||
|
||||
COBJS := $(COBJS-y)
|
||||
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
SOBJS := $(addprefix $(obj),$(SOBJS))
|
||||
|
||||
$(LIB): $(obj).depend $(OBJS)
|
||||
$(AR) $(ARFLAGS) $@ $(OBJS)
|
||||
|
||||
clean:
|
||||
rm -f $(SOBJS) $(OBJS)
|
||||
|
||||
distclean: clean
|
||||
rm -f $(LIB) core *.bak $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
|
||||
# defines $(obj).depend target
|
||||
include $(SRCTREE)/rules.mk
|
||||
|
||||
sinclude $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
316
board/davedenx/aria/aria.c
Normal file
316
board/davedenx/aria/aria.c
Normal file
@ -0,0 +1,316 @@
|
||||
/*
|
||||
* (C) Copyright 2009 Wolfgang Denk <wd@denx.de>
|
||||
* (C) Copyright 2009 Dave Srl www.dave.eu
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/bitops.h>
|
||||
#include <command.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/processor.h>
|
||||
#include <fdt_support.h>
|
||||
#ifdef CONFIG_MISC_INIT_R
|
||||
#include <i2c.h>
|
||||
#endif
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
extern int mpc5121_diu_init(void);
|
||||
extern void ide_set_reset(int idereset);
|
||||
|
||||
/* Clocks in use */
|
||||
#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \
|
||||
CLOCK_SCCR1_LPC_EN | \
|
||||
CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \
|
||||
CLOCK_SCCR1_PSCFIFO_EN | \
|
||||
CLOCK_SCCR1_DDR_EN | \
|
||||
CLOCK_SCCR1_FEC_EN | \
|
||||
CLOCK_SCCR1_PATA_EN | \
|
||||
CLOCK_SCCR1_PCI_EN | \
|
||||
CLOCK_SCCR1_TPR_EN)
|
||||
|
||||
#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \
|
||||
CLOCK_SCCR2_SPDIF_EN | \
|
||||
CLOCK_SCCR2_DIU_EN | \
|
||||
CLOCK_SCCR2_I2C_EN)
|
||||
|
||||
#define CSAW_START(start) ((start) & 0xFFFF0000)
|
||||
#define CSAW_STOP(start, size) (((start) + (size) - 1) >> 16)
|
||||
|
||||
long int fixed_sdram(void);
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
|
||||
u32 spridr;
|
||||
|
||||
/*
|
||||
* Initialize Local Window for the On Board FPGA access
|
||||
*/
|
||||
out_be32(&im->sysconf.lpcs2aw,
|
||||
CSAW_START(CONFIG_SYS_ARIA_FPGA_BASE) |
|
||||
CSAW_STOP(CONFIG_SYS_ARIA_FPGA_BASE, CONFIG_SYS_ARIA_FPGA_SIZE)
|
||||
);
|
||||
out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG);
|
||||
|
||||
/*
|
||||
* According to MPC5121e RM, configuring local access windows should
|
||||
* be followed by a dummy read of the config register that was
|
||||
* modified last and an isync
|
||||
*/
|
||||
in_be32(&im->sysconf.lpcs2aw);
|
||||
__asm__ __volatile__ ("isync");
|
||||
|
||||
/*
|
||||
* Initialize Local Window for the On Board SRAM access
|
||||
*/
|
||||
out_be32(&im->sysconf.lpcs6aw,
|
||||
CSAW_START(CONFIG_SYS_ARIA_SRAM_BASE) |
|
||||
CSAW_STOP(CONFIG_SYS_ARIA_SRAM_BASE, CONFIG_SYS_ARIA_SRAM_SIZE)
|
||||
);
|
||||
out_be32(&im->lpc.cs_cfg[6], CONFIG_SYS_CS6_CFG);
|
||||
|
||||
/*
|
||||
* According to MPC5121e RM, configuring local access windows should
|
||||
* be followed by a dummy read of the config register that was
|
||||
* modified last and an isync
|
||||
*/
|
||||
in_be32(&im->sysconf.lpcs6aw);
|
||||
__asm__ __volatile__ ("isync");
|
||||
|
||||
/*
|
||||
* Configure Flash Speed
|
||||
*/
|
||||
out_be32(&im->lpc.cs_cfg[0], CONFIG_SYS_CS0_CFG);
|
||||
|
||||
spridr = in_be32(&im->sysconf.spridr);
|
||||
|
||||
if (SVR_MJREV(spridr) >= 2)
|
||||
out_be32(&im->lpc.altr, CONFIG_SYS_CS_ALETIMING);
|
||||
|
||||
/*
|
||||
* Enable clocks
|
||||
*/
|
||||
out_be32(&im->clk.sccr[0], SCCR1_CLOCKS_EN);
|
||||
out_be32(&im->clk.sccr[1], SCCR2_CLOCKS_EN);
|
||||
#if defined(CONFIG_IIM) || defined(CONFIG_CMD_FUSE)
|
||||
setbits_be32(&im->clk.sccr[1], CLOCK_SCCR2_IIM_EN);
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
phys_size_t initdram (int board_type)
|
||||
{
|
||||
return fixed_sdram();
|
||||
}
|
||||
|
||||
/*
|
||||
* fixed sdram init:
|
||||
* The board doesn't use memory modules that have serial presence
|
||||
* detect or similar mechanism for discovery of the DRAM settings
|
||||
*/
|
||||
long int fixed_sdram (void)
|
||||
{
|
||||
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
|
||||
u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
|
||||
u32 msize_log2 = __ilog2(msize);
|
||||
u32 i;
|
||||
|
||||
/* Initialize IO Control */
|
||||
out_be32(&im->io_ctrl.io_control_mem, IOCTRL_MUX_DDR);
|
||||
|
||||
/* Initialize DDR Local Window */
|
||||
out_be32(&im->sysconf.ddrlaw.bar, CONFIG_SYS_DDR_BASE & 0xFFFFF000);
|
||||
out_be32(&im->sysconf.ddrlaw.ar, msize_log2 - 1);
|
||||
|
||||
/*
|
||||
* According to MPC5121e RM, configuring local access windows should
|
||||
* be followed by a dummy read of the config register that was
|
||||
* modified last and an isync
|
||||
*/
|
||||
in_be32(&im->sysconf.ddrlaw.ar);
|
||||
__asm__ __volatile__ ("isync");
|
||||
|
||||
/* Enable DDR */
|
||||
out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_EN);
|
||||
|
||||
/* Initialize DDR Priority Manager */
|
||||
out_be32(&im->mddrc.prioman_config1, CONFIG_SYS_MDDRCGRP_PM_CFG1);
|
||||
out_be32(&im->mddrc.prioman_config2, CONFIG_SYS_MDDRCGRP_PM_CFG2);
|
||||
out_be32(&im->mddrc.hiprio_config, CONFIG_SYS_MDDRCGRP_HIPRIO_CFG);
|
||||
out_be32(&im->mddrc.lut_table0_main_upper, CONFIG_SYS_MDDRCGRP_LUT0_MU);
|
||||
out_be32(&im->mddrc.lut_table0_main_lower, CONFIG_SYS_MDDRCGRP_LUT0_ML);
|
||||
out_be32(&im->mddrc.lut_table1_main_upper, CONFIG_SYS_MDDRCGRP_LUT1_MU);
|
||||
out_be32(&im->mddrc.lut_table1_main_lower, CONFIG_SYS_MDDRCGRP_LUT1_ML);
|
||||
out_be32(&im->mddrc.lut_table2_main_upper, CONFIG_SYS_MDDRCGRP_LUT2_MU);
|
||||
out_be32(&im->mddrc.lut_table2_main_lower, CONFIG_SYS_MDDRCGRP_LUT2_ML);
|
||||
out_be32(&im->mddrc.lut_table3_main_upper, CONFIG_SYS_MDDRCGRP_LUT3_MU);
|
||||
out_be32(&im->mddrc.lut_table3_main_lower, CONFIG_SYS_MDDRCGRP_LUT3_ML);
|
||||
out_be32(&im->mddrc.lut_table4_main_upper, CONFIG_SYS_MDDRCGRP_LUT4_MU);
|
||||
out_be32(&im->mddrc.lut_table4_main_lower, CONFIG_SYS_MDDRCGRP_LUT4_ML);
|
||||
out_be32(&im->mddrc.lut_table0_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT0_AU);
|
||||
out_be32(&im->mddrc.lut_table0_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT0_AL);
|
||||
out_be32(&im->mddrc.lut_table1_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT1_AU);
|
||||
out_be32(&im->mddrc.lut_table1_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT1_AL);
|
||||
out_be32(&im->mddrc.lut_table2_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT2_AU);
|
||||
out_be32(&im->mddrc.lut_table2_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT2_AL);
|
||||
out_be32(&im->mddrc.lut_table3_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT3_AU);
|
||||
out_be32(&im->mddrc.lut_table3_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT3_AL);
|
||||
out_be32(&im->mddrc.lut_table4_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT4_AU);
|
||||
out_be32(&im->mddrc.lut_table4_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT4_AL);
|
||||
|
||||
/* Initialize MDDRC */
|
||||
out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG);
|
||||
out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0);
|
||||
out_be32(&im->mddrc.ddr_time_config1, CONFIG_SYS_MDDRC_TIME_CFG1);
|
||||
out_be32(&im->mddrc.ddr_time_config2, CONFIG_SYS_MDDRC_TIME_CFG2);
|
||||
|
||||
/* Initialize DDR */
|
||||
for (i = 0; i < 10; i++)
|
||||
out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
|
||||
|
||||
out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
|
||||
out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
|
||||
out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
|
||||
out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
|
||||
out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
|
||||
out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
|
||||
out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
|
||||
out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
|
||||
out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2);
|
||||
out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
|
||||
out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
|
||||
out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2);
|
||||
out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM3);
|
||||
out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EN_DLL);
|
||||
out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
|
||||
out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
|
||||
out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
|
||||
out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
|
||||
out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_OCD_DEFAULT);
|
||||
out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
|
||||
out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
|
||||
|
||||
/* Start MDDRC */
|
||||
out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0_RUN);
|
||||
out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_RUN);
|
||||
|
||||
return msize;
|
||||
}
|
||||
|
||||
int misc_init_r(void)
|
||||
{
|
||||
u32 tmp;
|
||||
|
||||
/* we use I2C-2 for on-board eeprom */
|
||||
i2c_set_bus_num(2);
|
||||
|
||||
tmp = in_be32((u32*)CONFIG_SYS_ARIA_FPGA_BASE);
|
||||
printf("FPGA: %u-%u.%u.%u\n",
|
||||
(tmp & 0xFF000000) >> 24,
|
||||
(tmp & 0x00FF0000) >> 16,
|
||||
(tmp & 0x0000FF00) >> 8,
|
||||
tmp & 0x000000FF
|
||||
);
|
||||
|
||||
#ifdef CONFIG_FSL_DIU_FB
|
||||
# if !(defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE))
|
||||
mpc5121_diu_init();
|
||||
# endif
|
||||
#endif
|
||||
return 0;
|
||||
}
|
||||
|
||||
static iopin_t ioregs_init[] = {
|
||||
/*
|
||||
* FEC
|
||||
*/
|
||||
|
||||
/* FEC on PSCx_x*/
|
||||
{
|
||||
offsetof(struct ioctrl512x, io_control_psc0_0), 5, 0,
|
||||
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
||||
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
|
||||
},
|
||||
{
|
||||
offsetof(struct ioctrl512x, io_control_psc1_0), 10, 0,
|
||||
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
||||
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
|
||||
},
|
||||
{
|
||||
offsetof(struct ioctrl512x, io_control_spdif_txclk), 3, 0,
|
||||
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
||||
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
|
||||
},
|
||||
|
||||
/*
|
||||
* DIU
|
||||
*/
|
||||
/* FUNC2=DIU CLK */
|
||||
{
|
||||
offsetof(struct ioctrl512x, io_control_psc6_0), 1, 0,
|
||||
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
||||
IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
|
||||
},
|
||||
/* FUNC2=DIU_HSYNC */
|
||||
{
|
||||
offsetof(struct ioctrl512x, io_control_psc6_1), 1, 0,
|
||||
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
||||
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
|
||||
},
|
||||
/* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */
|
||||
{
|
||||
offsetof(struct ioctrl512x, io_control_psc6_4), 26, 0,
|
||||
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
||||
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
|
||||
},
|
||||
/*
|
||||
* On board SRAM
|
||||
*/
|
||||
/* FUNC2=/LPC CS6 */
|
||||
{
|
||||
offsetof(struct ioctrl512x, io_control_j1850_rx), 1, 0,
|
||||
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
||||
IO_PIN_PUE(1) | IO_PIN_ST(1) | IO_PIN_DS(3)
|
||||
},
|
||||
};
|
||||
|
||||
|
||||
int checkboard (void)
|
||||
{
|
||||
puts("Board: ARIA\n");
|
||||
|
||||
/* initialize function mux & slew rate IO inter alia on IO Pins */
|
||||
|
||||
iopin_initialize(ioregs_init, ARRAY_SIZE(ioregs_init));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
|
||||
void ft_board_setup(void *blob, bd_t *bd)
|
||||
{
|
||||
ft_cpu_setup(blob, bd);
|
||||
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
|
||||
}
|
||||
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
|
||||
23
board/davedenx/aria/config.mk
Normal file
23
board/davedenx/aria/config.mk
Normal file
@ -0,0 +1,23 @@
|
||||
#
|
||||
# (C) Copyright 2009 Wolfgang Denk <wd@denx.de>
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
TEXT_BASE = 0xFFF00000
|
||||
554
include/configs/aria.h
Normal file
554
include/configs/aria.h
Normal file
@ -0,0 +1,554 @@
|
||||
/*
|
||||
* (C) Copyright 2009 Wolfgang Denk <wd@denx.de>
|
||||
* (C) Copyright 2009, DAVE Srl <www.dave.eu>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
/*
|
||||
* Aria board configuration file
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#define CONFIG_ARIA 1
|
||||
/*
|
||||
* Memory map for the ARIA board:
|
||||
*
|
||||
* 0x0000_0000-0x0FFF_FFFF DDR RAM (256 MB)
|
||||
* 0x3000_0000-0x3001_FFFF On Chip SRAM (128 KB)
|
||||
* 0x3010_0000-0x3011_FFFF On Board SRAM (128 KB) - CS6
|
||||
* 0x3020_0000-0x3021_FFFF FPGA (128 KB) - CS2
|
||||
* 0x8000_0000-0x803F_FFFF IMMR (4 MB)
|
||||
* 0x8400_0000-0x82FF_FFFF PCI I/O space (16 MB)
|
||||
* 0xA000_0000-0xAFFF_FFFF PCI memory space (256 MB)
|
||||
* 0xB000_0000-0xBFFF_FFFF PCI memory mapped I/O space (256 MB)
|
||||
* 0xFC00_0000-0xFFFF_FFFF NOR Boot FLASH (64 MB)
|
||||
*/
|
||||
|
||||
/*
|
||||
* High Level Configuration Options
|
||||
*/
|
||||
#define CONFIG_E300 1 /* E300 Family */
|
||||
#define CONFIG_MPC512X 1 /* MPC512X family */
|
||||
#define CONFIG_FSL_DIU_FB 1 /* FSL DIU */
|
||||
#define CONFIG_FSL_DIU_LOGO_BMP 1 /* Don't include FSL DIU binary bmp */
|
||||
|
||||
/* video */
|
||||
#undef CONFIG_VIDEO
|
||||
|
||||
#if defined(CONFIG_VIDEO)
|
||||
#define CONFIG_CFB_CONSOLE
|
||||
#define CONFIG_VGA_AS_SINGLE_DEVICE
|
||||
#endif
|
||||
|
||||
/* CONFIG_PCI is defined at config time */
|
||||
|
||||
#define CONFIG_SYS_MPC512X_CLKIN 33000000 /* in Hz */
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */
|
||||
#define CONFIG_MISC_INIT_R
|
||||
|
||||
#define CONFIG_SYS_IMMR 0x80000000
|
||||
#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_IMMR+0x2100)
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */
|
||||
#define CONFIG_SYS_MEMTEST_END 0x00400000
|
||||
|
||||
/*
|
||||
* DDR Setup - manually set all parameters as there's no SPD etc.
|
||||
*/
|
||||
#define CONFIG_SYS_DDR_SIZE 256 /* MB */
|
||||
#define CONFIG_SYS_DDR_BASE 0x00000000
|
||||
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
|
||||
|
||||
/* DDR Controller Configuration
|
||||
*
|
||||
* SYS_CFG:
|
||||
* [31:31] MDDRC Soft Reset: Diabled
|
||||
* [30:30] DRAM CKE pin: Enabled
|
||||
* [29:29] DRAM CLK: Enabled
|
||||
* [28:28] Command Mode: Enabled (For initialization only)
|
||||
* [27:25] DRAM Row Select: dram_row[15:0] = magenta_address[25:10]
|
||||
* [24:21] DRAM Bank Select: dram_bank[1:0] = magenta_address[11:10]
|
||||
* [20:19] Read Test: DON'T USE
|
||||
* [18:18] Self Refresh: Enabled
|
||||
* [17:17] 16bit Mode: Disabled
|
||||
* [16:13] Ready Delay: 2
|
||||
* [12:12] Half DQS Delay: Disabled
|
||||
* [11:11] Quarter DQS Delay: Disabled
|
||||
* [10:08] Write Delay: 2
|
||||
* [07:07] Early ODT: Disabled
|
||||
* [06:06] On DIE Termination: Disabled
|
||||
* [05:05] FIFO Overflow Clear: DON'T USE here
|
||||
* [04:04] FIFO Underflow Clear: DON'T USE here
|
||||
* [03:03] FIFO Overflow Pending: DON'T USE here
|
||||
* [02:02] FIFO Underlfow Pending: DON'T USE here
|
||||
* [01:01] FIFO Overlfow Enabled: Enabled
|
||||
* [00:00] FIFO Underflow Enabled: Enabled
|
||||
* TIME_CFG0
|
||||
* [31:16] DRAM Refresh Time: 0 CSB clocks
|
||||
* [15:8] DRAM Command Time: 0 CSB clocks
|
||||
* [07:00] DRAM Precharge Time: 0 CSB clocks
|
||||
* TIME_CFG1
|
||||
* [31:26] DRAM tRFC:
|
||||
* [25:21] DRAM tWR1:
|
||||
* [20:17] DRAM tWRT1:
|
||||
* [16:11] DRAM tDRR:
|
||||
* [10:05] DRAM tRC:
|
||||
* [04:00] DRAM tRAS:
|
||||
* TIME_CFG2
|
||||
* [31:28] DRAM tRCD:
|
||||
* [27:23] DRAM tFAW:
|
||||
* [22:19] DRAM tRTW1:
|
||||
* [18:15] DRAM tCCD:
|
||||
* [14:10] DRAM tRTP:
|
||||
* [09:05] DRAM tRP:
|
||||
* [04:00] DRAM tRPA
|
||||
*/
|
||||
#define CONFIG_SYS_MDDRC_SYS_CFG 0xF8604A00
|
||||
#define CONFIG_SYS_MDDRC_SYS_CFG_RUN 0xE8604A00
|
||||
/*#define CONFIG_SYS_MDDRC_TIME_CFG1 0x54EC1168 */
|
||||
#define CONFIG_SYS_MDDRC_TIME_CFG1 0x55D81189
|
||||
/*#define CONFIG_SYS_MDDRC_TIME_CFG2 0x35210864 */
|
||||
#define CONFIG_SYS_MDDRC_TIME_CFG2 0x34790863
|
||||
|
||||
#define CONFIG_SYS_MDDRC_SYS_CFG_EN 0xF0000000
|
||||
#define CONFIG_SYS_MDDRC_TIME_CFG0 0x00003D2E
|
||||
/*#define CONFIG_SYS_MDDRC_TIME_CFG0_RUN 0x06183D2E */
|
||||
#define CONFIG_SYS_MDDRC_TIME_CFG0_RUN 0x030C3D2E
|
||||
|
||||
#define CONFIG_SYS_MICRON_NOP 0x01380000
|
||||
#define CONFIG_SYS_MICRON_PCHG_ALL 0x01100400
|
||||
#define CONFIG_SYS_MICRON_EM2 0x01020000
|
||||
#define CONFIG_SYS_MICRON_EM3 0x01030000
|
||||
#define CONFIG_SYS_MICRON_EN_DLL 0x01010000
|
||||
#define CONFIG_SYS_MICRON_RFSH 0x01080000
|
||||
#define CONFIG_SYS_MICRON_INIT_DEV_OP 0x01000432
|
||||
#define CONFIG_SYS_MICRON_OCD_DEFAULT 0x01010780
|
||||
|
||||
/* DDR Priority Manager Configuration */
|
||||
#define CONFIG_SYS_MDDRCGRP_PM_CFG1 0x00077777
|
||||
#define CONFIG_SYS_MDDRCGRP_PM_CFG2 0x00000000
|
||||
#define CONFIG_SYS_MDDRCGRP_HIPRIO_CFG 0x00000001
|
||||
#define CONFIG_SYS_MDDRCGRP_LUT0_MU 0xFFEEDDCC
|
||||
#define CONFIG_SYS_MDDRCGRP_LUT0_ML 0xBBAAAAAA
|
||||
#define CONFIG_SYS_MDDRCGRP_LUT1_MU 0x66666666
|
||||
#define CONFIG_SYS_MDDRCGRP_LUT1_ML 0x55555555
|
||||
#define CONFIG_SYS_MDDRCGRP_LUT2_MU 0x44444444
|
||||
#define CONFIG_SYS_MDDRCGRP_LUT2_ML 0x44444444
|
||||
#define CONFIG_SYS_MDDRCGRP_LUT3_MU 0x55555555
|
||||
#define CONFIG_SYS_MDDRCGRP_LUT3_ML 0x55555558
|
||||
#define CONFIG_SYS_MDDRCGRP_LUT4_MU 0x11111111
|
||||
#define CONFIG_SYS_MDDRCGRP_LUT4_ML 0x11111122
|
||||
#define CONFIG_SYS_MDDRCGRP_LUT0_AU 0xaaaaaaaa
|
||||
#define CONFIG_SYS_MDDRCGRP_LUT0_AL 0xaaaaaaaa
|
||||
#define CONFIG_SYS_MDDRCGRP_LUT1_AU 0x66666666
|
||||
#define CONFIG_SYS_MDDRCGRP_LUT1_AL 0x66666666
|
||||
#define CONFIG_SYS_MDDRCGRP_LUT2_AU 0x11111111
|
||||
#define CONFIG_SYS_MDDRCGRP_LUT2_AL 0x11111111
|
||||
#define CONFIG_SYS_MDDRCGRP_LUT3_AU 0x11111111
|
||||
#define CONFIG_SYS_MDDRCGRP_LUT3_AL 0x11111111
|
||||
#define CONFIG_SYS_MDDRCGRP_LUT4_AU 0x11111111
|
||||
#define CONFIG_SYS_MDDRCGRP_LUT4_AL 0x11111111
|
||||
|
||||
/*
|
||||
* NOR FLASH on the Local Bus
|
||||
*/
|
||||
#define CONFIG_SYS_FLASH_CFI /* use the CFI code */
|
||||
#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
|
||||
#define CONFIG_SYS_FLASH_BASE 0xF8000000 /* start of FLASH */
|
||||
#define CONFIG_SYS_FLASH_SIZE 0x08000000 /* max flash size */
|
||||
|
||||
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
|
||||
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* max sectors */
|
||||
|
||||
#undef CONFIG_SYS_FLASH_CHECKSUM
|
||||
|
||||
#define CONFIG_SYS_SRAM_BASE 0x30000000
|
||||
#define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */
|
||||
|
||||
#define CONFIG_SYS_ARIA_SRAM_BASE 0x30020000
|
||||
#define CONFIG_SYS_ARIA_SRAM_SIZE 0x20000 /* 128 KB */
|
||||
|
||||
#define CONFIG_SYS_ARIA_FPGA_BASE (CONFIG_SYS_ARIA_SRAM_BASE + \
|
||||
CONFIG_SYS_ARIA_SRAM_SIZE)
|
||||
#define CONFIG_SYS_ARIA_FPGA_SIZE 0x20000 /* 128 KB */
|
||||
|
||||
#define CONFIG_SYS_CS0_CFG 0x05059150
|
||||
#define CONFIG_SYS_CS2_CFG ( (5 << 24) | \
|
||||
(5 << 16) | \
|
||||
(1 << 15) | \
|
||||
(0 << 14) | \
|
||||
(0 << 13) | \
|
||||
(1 << 12) | \
|
||||
(0 << 10) | \
|
||||
(3 << 8) | /* 32 bit */ \
|
||||
(0 << 7) | \
|
||||
(1 << 6) | \
|
||||
(1 << 4) | \
|
||||
(0 << 3) | \
|
||||
(0 << 2) | \
|
||||
(0 << 1) | \
|
||||
(0 << 0) \
|
||||
)
|
||||
#define CONFIG_SYS_CS6_CFG 0x05059150
|
||||
|
||||
/* Use alternative CS timing for CS0 and CS2 */
|
||||
#define CONFIG_SYS_CS_ALETIMING 0x00000005
|
||||
|
||||
/* Use SRAM for initial stack */
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE
|
||||
#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_SRAM_SIZE
|
||||
|
||||
#define CONFIG_SYS_GBL_DATA_SIZE 0x100
|
||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \
|
||||
CONFIG_SYS_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
||||
|
||||
#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
|
||||
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
|
||||
|
||||
#ifdef CONFIG_FSL_DIU_FB
|
||||
#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024)
|
||||
#else
|
||||
#define CONFIG_SYS_MALLOC_LEN (512 * 1024)
|
||||
#endif
|
||||
|
||||
/* FPGA */
|
||||
#define CONFIG_ARIA_FPGA 1
|
||||
|
||||
/*
|
||||
* Serial Port
|
||||
*/
|
||||
#define CONFIG_CONS_INDEX 1
|
||||
#undef CONFIG_SERIAL_SOFTWARE_FIFO
|
||||
|
||||
/*
|
||||
* Serial console configuration
|
||||
*/
|
||||
#define CONFIG_PSC_CONSOLE 3 /* console on PSC3 */
|
||||
#if CONFIG_PSC_CONSOLE != 3
|
||||
#error CONFIG_PSC_CONSOLE must be 3
|
||||
#endif
|
||||
|
||||
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE \
|
||||
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
|
||||
|
||||
#define CONSOLE_FIFO_TX_SIZE FIFOC_PSC3_TX_SIZE
|
||||
#define CONSOLE_FIFO_TX_ADDR FIFOC_PSC3_TX_ADDR
|
||||
#define CONSOLE_FIFO_RX_SIZE FIFOC_PSC3_RX_SIZE
|
||||
#define CONSOLE_FIFO_RX_ADDR FIFOC_PSC3_RX_ADDR
|
||||
|
||||
#define CONFIG_CMDLINE_EDITING 1 /* command line history */
|
||||
/* Use the HUSH parser */
|
||||
#define CONFIG_SYS_HUSH_PARSER
|
||||
#ifdef CONFIG_SYS_HUSH_PARSER
|
||||
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
||||
#endif
|
||||
|
||||
/*
|
||||
* PCI
|
||||
*/
|
||||
#ifdef CONFIG_PCI
|
||||
|
||||
#define CONFIG_SYS_PCI_MEM_BASE 0xA0000000
|
||||
#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE
|
||||
#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 /* 256M */
|
||||
#define CONFIG_SYS_PCI_MMIO_BASE (CONFIG_SYS_PCI_MEM_BASE + \
|
||||
CONFIG_SYS_PCI_MEM_SIZE)
|
||||
#define CONFIG_SYS_PCI_MMIO_PHYS CONFIG_SYS_PCI_MMIO_BASE
|
||||
#define CONFIG_SYS_PCI_MMIO_SIZE 0x10000000 /* 256M */
|
||||
#define CONFIG_SYS_PCI_IO_BASE 0x00000000
|
||||
#define CONFIG_SYS_PCI_IO_PHYS 0x84000000
|
||||
#define CONFIG_SYS_PCI_IO_SIZE 0x01000000 /* 16M */
|
||||
|
||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||
|
||||
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
||||
|
||||
#endif
|
||||
|
||||
/* I2C */
|
||||
#define CONFIG_HARD_I2C /* I2C with hardware support */
|
||||
#undef CONFIG_SOFT_I2C /* so disable bit-banged I2C */
|
||||
#define CONFIG_I2C_MULTI_BUS
|
||||
#define CONFIG_I2C_CMD_TREE
|
||||
|
||||
/* I2C speed and slave address */
|
||||
#define CONFIG_SYS_I2C_SPEED 100000
|
||||
#define CONFIG_SYS_I2C_SLAVE 0x7F
|
||||
#if 0
|
||||
#define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* IIM - IC Identification Module
|
||||
*/
|
||||
#undef CONFIG_IIM
|
||||
|
||||
/*
|
||||
* EEPROM configuration for Atmel AT24C32A-10TQ-2.7:
|
||||
* 16-bit addresses, 10ms write delay, 32-Byte Page Write Mode
|
||||
*/
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
|
||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
|
||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
|
||||
|
||||
/*
|
||||
* Ethernet configuration
|
||||
*/
|
||||
#define CONFIG_MPC512x_FEC 1
|
||||
#define CONFIG_NET_MULTI
|
||||
#define CONFIG_PHY_ADDR 0x17
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#define CONFIG_FEC_AN_TIMEOUT 1
|
||||
#define CONFIG_HAS_ETH0
|
||||
|
||||
/*
|
||||
* Environment
|
||||
*/
|
||||
#define CONFIG_ENV_IS_IN_FLASH 1
|
||||
/* This has to be a multiple of the flash sector size */
|
||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
|
||||
CONFIG_SYS_MONITOR_LEN)
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
#define CONFIG_ENV_SECT_SIZE 0x20000 /* one sector (256K) */
|
||||
|
||||
/* Address and size of Redundant Environment Sector */
|
||||
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + \
|
||||
CONFIG_ENV_SECT_SIZE)
|
||||
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
|
||||
|
||||
#define CONFIG_LOADS_ECHO 1
|
||||
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1
|
||||
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#define CONFIG_CMD_ASKENV
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_EEPROM
|
||||
#undef CONFIG_CMD_FUSE
|
||||
#define CONFIG_CMD_I2C
|
||||
#undef CONFIG_CMD_IDE
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_CMD_NFS
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_REGINFO
|
||||
|
||||
#if defined(CONFIG_PCI)
|
||||
#define CONFIG_CMD_PCI
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_CMD_IDE)
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#define CONFIG_MAC_PARTITION
|
||||
#define CONFIG_ISO_PARTITION
|
||||
#endif /* defined(CONFIG_CMD_IDE) */
|
||||
|
||||
/*
|
||||
* Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock.
|
||||
* For example, when IPS is set to 66MHz and CONFIG_SYS_WATCHDOG_VALUE
|
||||
* is set to 0xFFFF, watchdog timeouts after about 64s. For details
|
||||
* refer to chapter 36 of the MPC5121e Reference Manual.
|
||||
*/
|
||||
/* #define CONFIG_WATCHDOG */ /* enable watchdog */
|
||||
#define CONFIG_SYS_WATCHDOG_VALUE 0xFFFF
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
|
||||
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
|
||||
|
||||
#ifdef CONFIG_CMD_KGDB
|
||||
# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
|
||||
/* Print Buffer Size */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
||||
sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
/* max number of command args */
|
||||
#define CONFIG_SYS_MAXARGS 32
|
||||
/* Boot Argument Buffer Size */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
||||
|
||||
#define CONFIG_SYS_HZ 1000
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
|
||||
|
||||
/* Cache Configuration */
|
||||
#define CONFIG_SYS_DCACHE_SIZE 32768
|
||||
#define CONFIG_SYS_CACHELINE_SIZE 32
|
||||
#ifdef CONFIG_CMD_KGDB
|
||||
#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of 32 */
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_HID0_INIT 0x000000000
|
||||
#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
|
||||
HID0_ICE)
|
||||
#define CONFIG_SYS_HID2 HID2_HBE
|
||||
|
||||
#define CONFIG_HIGH_BATS 1 /* High BATs supported */
|
||||
|
||||
/*
|
||||
* Internal Definitions
|
||||
*
|
||||
* Boot Flags
|
||||
*/
|
||||
#define BOOTFLAG_COLD 0x01
|
||||
#define BOOTFLAG_WARM 0x02
|
||||
|
||||
#ifdef CONFIG_CMD_KGDB
|
||||
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
|
||||
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Environment Configuration
|
||||
*/
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
#define CONFIG_TIMESTAMP
|
||||
|
||||
#define CONFIG_HOSTNAME aria
|
||||
#define CONFIG_BOOTFILE aria/uImage
|
||||
#define CONFIG_ROOTPATH /opt/eldk/ppc_6xx
|
||||
|
||||
#define CONFIG_LOADADDR 400000 /* default load addr */
|
||||
|
||||
#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */
|
||||
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#define CONFIG_PREBOOT "echo;" \
|
||||
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
|
||||
"echo"
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"u-boot_addr_r=200000\0" \
|
||||
"kernel_addr_r=600000\0" \
|
||||
"fdt_addr_r=880000\0" \
|
||||
"ramdisk_addr_r=900000\0" \
|
||||
"u-boot_addr=FFF00000\0" \
|
||||
"kernel_addr=FFC40000\0" \
|
||||
"fdt_addr=FFEC0000\0" \
|
||||
"ramdisk_addr=FC040000\0" \
|
||||
"ramdiskfile=aria/uRamdisk\0" \
|
||||
"u-boot=aria/u-boot.bin\0" \
|
||||
"fdtfile=aria/aria.dtb\0" \
|
||||
"netdev=eth0\0" \
|
||||
"consdev=ttyPSC0\0" \
|
||||
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=${serverip}:${rootpath}\0" \
|
||||
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
||||
"addip=setenv bootargs ${bootargs} " \
|
||||
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
||||
":${hostname}:${netdev}:off panic=1\0" \
|
||||
"addtty=setenv bootargs ${bootargs} " \
|
||||
"console=${consdev},${baudrate}\0" \
|
||||
"flash_nfs=run nfsargs addip addtty;" \
|
||||
"bootm ${kernel_addr} - ${fdt_addr}\0" \
|
||||
"flash_self=run ramargs addip addtty;" \
|
||||
"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
|
||||
"net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
|
||||
"tftp ${fdt_addr_r} ${fdtfile};" \
|
||||
"run nfsargs addip addtty;" \
|
||||
"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
|
||||
"net_self=tftp ${kernel_addr_r} ${bootfile};" \
|
||||
"tftp ${ramdisk_addr_r} ${ramdiskfile};" \
|
||||
"tftp ${fdt_addr_r} ${fdtfile};" \
|
||||
"run ramargs addip addtty;" \
|
||||
"bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0"\
|
||||
"load=tftp ${u-boot_addr_r} ${u-boot}\0" \
|
||||
"update=protect off ${u-boot_addr} +${filesize};" \
|
||||
"era ${u-boot_addr} +${filesize};" \
|
||||
"cp.b ${u-boot_addr_r} ${u-boot_addr} ${filesize}\0" \
|
||||
"upd=run load update\0" \
|
||||
""
|
||||
|
||||
#define CONFIG_BOOTCOMMAND "run flash_self"
|
||||
|
||||
#define CONFIG_OF_LIBFDT 1
|
||||
#define CONFIG_OF_BOARD_SETUP 1
|
||||
#define CONFIG_OF_SUPPORT_OLD_DEVICE_TREES 1
|
||||
|
||||
#define OF_CPU "PowerPC,5121@0"
|
||||
#define OF_SOC_COMPAT "fsl,mpc5121-immr"
|
||||
#define OF_TBCLK (bd->bi_busfreq / 4)
|
||||
#define OF_STDOUT_PATH "/soc@80000000/serial@11300"
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* IDE/ATA stuff
|
||||
*-----------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
|
||||
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
|
||||
#undef CONFIG_IDE_LED /* LED for IDE not supported */
|
||||
|
||||
#define CONFIG_IDE_RESET /* reset for IDE supported */
|
||||
#define CONFIG_IDE_PREINIT
|
||||
|
||||
#define CONFIG_SYS_IDE_MAXBUS 1 /* 1 IDE bus */
|
||||
#define CONFIG_SYS_IDE_MAXDEVICE 2 /* 1 drive per IDE bus */
|
||||
|
||||
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
|
||||
#define CONFIG_SYS_ATA_BASE_ADDR get_pata_base()
|
||||
|
||||
/* Offset for data I/O RefMan MPC5121EE Table 28-10 */
|
||||
#define CONFIG_SYS_ATA_DATA_OFFSET (0x00A0)
|
||||
|
||||
/* Offset for normal register accesses */
|
||||
#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET)
|
||||
|
||||
/* Offset for alternate registers RefMan MPC5121EE Table 28-23 */
|
||||
#define CONFIG_SYS_ATA_ALT_OFFSET (0x00D8)
|
||||
|
||||
/* Interval between registers */
|
||||
#define CONFIG_SYS_ATA_STRIDE 4
|
||||
|
||||
#define ATA_BASE_ADDR get_pata_base()
|
||||
|
||||
/*
|
||||
* Control register bit definitions
|
||||
*/
|
||||
#define FSL_ATA_CTRL_FIFO_RST_B 0x80000000
|
||||
#define FSL_ATA_CTRL_ATA_RST_B 0x40000000
|
||||
#define FSL_ATA_CTRL_FIFO_TX_EN 0x20000000
|
||||
#define FSL_ATA_CTRL_FIFO_RCV_EN 0x10000000
|
||||
#define FSL_ATA_CTRL_DMA_PENDING 0x08000000
|
||||
#define FSL_ATA_CTRL_DMA_ULTRA 0x04000000
|
||||
#define FSL_ATA_CTRL_DMA_WRITE 0x02000000
|
||||
#define FSL_ATA_CTRL_IORDY_EN 0x01000000
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
Loading…
Reference in New Issue
Block a user