leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

stm32: Change USART port to USART6 for stm32f746 discovery board

Browse Source 
This change is to remove a halt at about 200KiB
while sending a large(1MiB) binary to a micro controller using USART1.
USART1 is connected to a PC via an on-board ST-Link debugger
that also functions as a USB-Serial converter.
However, it seems to loss some data occasionally.
So I changed the serial port to USART6 and connected it to the PC using
an FTDI USB-Serial cable, therefore the transmission was successfully
completed.

Signed-off-by: Toshifumi NISHINAGA <tnishinaga.dev@gmail.com>
This commit is contained in:
Toshifumi NISHINAGA 2016-07-08 01:02:26 +09:00 committed by Tom Rini
parent 25c1b1353c
commit 4b2fd720a7
3 changed files with 11 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm/include/asm/arch-stm32f7/stm32_periph.h
View File

@ -17,11 +17,13 @@
enum periph_id {
UART1_GPIOA_9_10 = 0,
UART2_GPIOD_5_6,
UART6_GPIOC_6_7,
};
enum periph_clock {
USART1_CLOCK_CFG = 0,
USART2_CLOCK_CFG,
USART6_CLOCK_CFG,
GPIO_A_CLOCK_CFG,
GPIO_B_CLOCK_CFG,
GPIO_C_CLOCK_CFG,

3
arch/arm/mach-stm32/stm32f7/clock.c
View File

@ -245,6 +245,9 @@ void clock_setup(int peripheral)
case USART1_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_APB2ENR, RCC_ENR_USART1EN);
break;
case USART6_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_APB2ENR, RCC_ENR_USART6EN);
break;
case GPIO_A_CLOCK_CFG:
setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_A_EN);
break;

13
board/st/stm32f746-disco/stm32f746-disco.c
View File

@ -32,7 +32,7 @@ const struct stm32_gpio_ctl gpio_ctl_usart = {
.otype = STM32_GPIO_OTYPE_PP,
.speed = STM32_GPIO_SPEED_50M,
.pupd = STM32_GPIO_PUPD_UP,
.af = STM32_GPIO_AF7
.af = STM32_GPIO_AF8
};
const struct stm32_gpio_ctl gpio_ctl_fmc = {
@ -251,8 +251,8 @@ int dram_init(void)
}
static const struct stm32_gpio_dsc usart_gpio[] = {
{STM32_GPIO_PORT_A, STM32_GPIO_PIN_9}, /* TX */
{STM32_GPIO_PORT_B, STM32_GPIO_PIN_7}, /* RX */
{STM32_GPIO_PORT_C, STM32_GPIO_PIN_6}, /* TX */
{STM32_GPIO_PORT_C, STM32_GPIO_PIN_7}, /* RX */
};
int uart_setup_gpio(void)
@ -260,8 +260,7 @@ int uart_setup_gpio(void)
int i;
int rv = 0;
clock_setup(GPIO_A_CLOCK_CFG);
clock_setup(GPIO_B_CLOCK_CFG);
clock_setup(GPIO_C_CLOCK_CFG);
for (i = 0; i < ARRAY_SIZE(usart_gpio); i++) {
rv = stm32_gpio_config(&usart_gpio[i], &gpio_ctl_usart);
if (rv)
@ -273,7 +272,7 @@ out:
}
static const struct stm32x7_serial_platdata serial_platdata = {
.base = (struct stm32_usart *)USART1_BASE,
.base = (struct stm32_usart *)USART6_BASE,
.clock = CONFIG_SYS_CLK_FREQ,
};
@ -292,7 +291,7 @@ int board_early_init_f(void)
int res;
res = uart_setup_gpio();
clock_setup(USART1_CLOCK_CFG);
clock_setup(USART6_CLOCK_CFG);
if (res)
return res;